LOOKING FOR THE RIGHT
INDUSTRIAL SOLUTION?
Discover embedded, communication and automation solutions tailored to your application.
- Processor: Cyrix Geode GX1 300 MHz low‑power CPU
- Chipset: Cyrix Geode GX1 with CX5530 companion chipset
- Memory: One 168‑pin DIMM socket supporting up to 256 MB SDRAM
- Display: Integrated Cyrix CX5530 VGA controller with 4 MB shared memory, supporting CRT and LCD panels up to 1024 × 768 @ 16‑bit color
- Networking: Dual Realtek RTL8100 10/100 Base‑T Ethernet controllers
- Audio: Integrated Cyrix CX5530 3D audio controller with Line‑In, Line‑Out, and Mic‑In connectors
- Storage Interfaces:
- Two IDE channels (ATA/33, up to 33 MB/s)
- One FDD interface (supports two floppy drives)
- CompactFlash™ socket (IDE interface)
- DiskOnChip™ socket (up to 288 MB)
- Serial Communication: Four COM ports (3 × RS‑232, 1 × RS‑232/422/485 selectable)
- Parallel Port: One EPP/ECP/SPP‑compatible parallel interface
- USB: Two USB 1.1 ports
- PC/104 Expansion: 16‑bit ISA bus compatible PC/104 connectors
- Watchdog Timer: Hardware WDT with programmable timeouts (1 s – 220 s) and reset/NMI options
- Digital I/O: 4‑bit GPIO port for user‑defined control
- Power: Single +5 V DC input (2 A typical)
- Form Factor: PISA slot CPU card, 185 mm × 122 mm
- Operating Temperature: 0 °C – 60 °C
The HS‑5230/CF integrates all essential PC functions on a single board, providing a compact, fan‑less, and cost‑effective solution for industrial control, automation, and embedded computing.
- Chipset: Cyrix Geode GX1 with CX5530 companion chipset
- Memory: One 168‑pin DIMM socket supporting up to 256 MB SDRAM
- Display: Integrated Cyrix CX5530 VGA controller with 4 MB shared memory, supporting CRT and LCD panels up to 1024 × 768 @ 16‑bit color
- Networking: Dual Realtek RTL8100 10/100 Base‑T Ethernet controllers
- Audio: Integrated Cyrix CX5530 3D audio controller with Line‑In, Line‑Out, and Mic‑In connectors
- Storage Interfaces:
- Two IDE channels (ATA/33, up to 33 MB/s)
- One FDD interface (supports two floppy drives)
- CompactFlash™ socket (IDE interface)
- DiskOnChip™ socket (up to 288 MB)
- Serial Communication: Four COM ports (3 × RS‑232, 1 × RS‑232/422/485 selectable)
- Parallel Port: One EPP/ECP/SPP‑compatible parallel interface
- USB: Two USB 1.1 ports
- PC/104 Expansion: 16‑bit ISA bus compatible PC/104 connectors
- Watchdog Timer: Hardware WDT with programmable timeouts (1 s – 220 s) and reset/NMI options
- Digital I/O: 4‑bit GPIO port for user‑defined control
- Power: Single +5 V DC input (2 A typical)
- Form Factor: PISA slot CPU card, 185 mm × 122 mm
- Operating Temperature: 0 °C – 60 °C
The HS‑5230/CF integrates all essential PC functions on a single board, providing a compact, fan‑less, and cost‑effective solution for industrial control, automation, and embedded computing.
Comprehensive Product Summary – BOSER HS‑5230/CF PISA Slot CPU Board
### 1. Product Overview
Product Name: HS‑5230/CF
Model: HS‑5230 (CompactFlash version)
Series: PISA Slot CPU Board Series
Article Number: HS‑5230/CF
Manufacturer: BOSER Technology Co., Ltd.
Edition: 1.3 (July 28, 2003)
The BOSER HS‑5230/CF is an industrial single board computer (SBC) designed for embedded and automation applications requiring low power consumption, high reliability, and extensive I/O integration. It is a PISA slot CPU card built around the Cyrix® Geode GX1 300 MHz processor, integrating dual Ethernet LAN, VGA/LCD display, audio, serial and parallel ports, USB, PC/104 expansion, and CompactFlash™ storage support. The board operates on a single +5 V DC supply and interfaces with both PISA and ISA buses, making it ideal for legacy‑compatible industrial systems.
### 2. Key Features
- Processor: Cyrix Geode GX1 300 MHz low‑power CPU
- Chipset: Cyrix Geode GX1 with CX5530 companion chipset
- Memory: One 168‑pin DIMM socket supporting up to 256 MB SDRAM
- Display: Integrated Cyrix CX5530 VGA controller with 4 MB shared memory, supporting CRT and LCD panels up to 1024 × 768 @ 16‑bit color
- Networking: Dual Realtek RTL8100 10/100 Base‑T Ethernet controllers
- Audio: Integrated Cyrix CX5530 3D audio controller with Line‑In, Line‑Out, and Mic‑In connectors
- Storage Interfaces:
- Two IDE channels (ATA/33, up to 33 MB/s)
- One FDD interface (supports two floppy drives)
- CompactFlash™ socket (IDE interface)
- DiskOnChip™ socket (up to 288 MB)
- Serial Communication: Four COM ports (3 × RS‑232, 1 × RS‑232/422/485 selectable)
- Parallel Port: One EPP/ECP/SPP‑compatible parallel interface
- USB: Two USB 1.1 ports
- PC/104 Expansion: 16‑bit ISA bus compatible PC/104 connectors
- Watchdog Timer: Hardware WDT with programmable timeouts (1 s – 220 s) and reset/NMI options
- Digital I/O: 4‑bit GPIO port for user‑defined control
- Power: Single +5 V DC input (2 A typical)
- Form Factor: PISA slot CPU card, 185 mm × 122 mm
- Operating Temperature: 0 °C – 60 °C
The HS‑5230/CF integrates all essential PC functions on a single board, providing a compact, fan‑less, and cost‑effective solution for industrial control, automation, and embedded computing.
### 3. Technical Specifications
| Parameter | Specification |
|----------------|------------------|
| CPU | Cyrix Geode GX1 300 MHz |
| Chipset | Cyrix GX1 + CX5530 |
| Memory | 1 × 168‑pin DIMM, up to 256 MB SDRAM |
| Bus Interface | PCI‑ISA (PISA slot) |
| I/O Chipset | Winbond W83977, NS97317 |
| Display | Cyrix CX5530 VGA, 4 MB shared memory, CRT/LCD up to 1024 × 768 × 16‑bit |
| LAN | Dual Realtek RTL8100 10/100 Base‑T Ethernet |
| Audio | Cyrix CX5530 3D audio controller |
| Serial Ports | 3 × RS‑232, 1 × RS‑232/422/485 (16C550 UART, 16‑byte FIFO) |
| Parallel Port | 1 × EPP/ECP/SPP bi‑directional |
| USB Ports | 2 × USB 1.1 |
| IDE Interface | 2 × 40‑pin connectors, ATA/33, supports two drives |
| FDD Interface | 1 × 34‑pin connector, supports two floppy drives |
| CompactFlash™ | 1 × IDE‑type CF socket (J1, solder side) |
| DiskOnChip™ | 1 × DOC socket, up to 288 MB |
| PC/104 Bus | 16‑bit ISA compatible |
| IrDA | 1 × 5‑pin header |
| GPIO | 4‑bit digital I/O (CN8) |
| Watchdog Timer | 1 s – 220 s, Reset or NMI selectable |
| BIOS | Award PnP Flash BIOS |
| Power Input | +5 V DC (2 A typical) |
| Connectors | ATX 5‑pin, 2‑pin power switch, fan header |
| Dimensions | 185 mm × 121 mm |
| Operating Temp. | 0 °C – 60 °C |
| Storage Temp. | ‑20 °C – 80 °C (typical) |
| Weight | Approx. 0.35 kg (board only) |
### 4. Functionality
The HS‑5230/CF operates as a full‑featured industrial PC on a single board. It integrates CPU, memory, storage, display, networking, and I/O interfaces, allowing direct installation into PISA or ISA backplanes. The board supports both CRT and LCD displays, dual Ethernet networking, and multiple serial communication standards for industrial device interfacing.
Typical Applications:
- Industrial automation controllers
- Human‑machine interfaces (HMI)
- Data acquisition systems
- Networked embedded controllers
- Legacy ISA‑based control systems
- Kiosk and digital signage systems
Compatibility:
- Supports DOS, Windows 95/98/NT 4.0, and other x86‑compatible operating systems
- Compatible with standard PC peripherals and PC/104 expansion modules
- BIOS supports Plug‑and‑Play, power management, and IDE auto‑detection
### 5. Components & Accessories
Included in Standard Package:
- HS‑5230/CF single board computer
- IDE flat cable (40‑pin)
- FDD flat cable (34‑pin)
- Sound connector cable with bracket
- Two COM port cables with brackets
- Printer port cable with bracket
- 5‑pin ATX power connector cable
- Utility disk (drivers and utilities)
- User’s manual
Optional Accessories:
- CompactFlash™ adapter (J1 soldered)
- DiskOnChip™ module (up to 288 MB)
- PC/104 expansion modules
- Panel cables for LCD connection
- Additional serial/parallel port brackets
Connectors Overview:
- CN1: 5‑pin keyboard connector
- CN2: Front panel signal connector (Reset, Speaker, HDD LED)
- CN3: 2‑pin +5 V power input
- CN4: 5‑pin ATX power control
- CN5: 2‑pin ATX power switch
- CN6: 44‑pin LCD panel connector
- CN7: 40‑pin IDE connector
- CN9: 34‑pin FDD connector
- CN10/CN11: PC/104 connectors (64‑pin + 40‑pin)
- CN12: 26‑pin parallel port
- CN13–CN18: COM1–COM4 connectors
- CN19: DB‑15 CRT connector
- CN20/CN21: PS/2 keyboard/mouse connectors
- CN22: Dual RJ‑45 LAN connector
- JP1: IrDA header
- JP2: USB header (2 ports)
- JP3: Panel voltage select (3.3 V/5 V)
- JP4/JP7: Audio Line‑Out/Line‑In connectors
- JP5: CMOS clear jumper
- JP6: DiskOnChip address & WDT period select
- JP8/JP9: RS‑232/422/485 mode select
- JP10: Watchdog active type select
- JP11/JP12: RS‑422/485 transceiver control
- FN1: Fan power connector
### 6. Installation & Setup
Requirements:
- +5 V DC regulated power supply (2 A minimum)
- PISA or ISA backplane slot
- Anti‑static handling precautions (ESD protection required)
Installation Steps:
1. Verify jumper settings (JP3–JP12) according to system configuration.
2. Install SDRAM module (up to 256 MB) in DIMM socket DM1.
3. Connect IDE/FDD cables to storage devices.
4. Attach display via CN19 (CRT) or CN6 (LCD).
5. Connect keyboard/mouse via PS/2 ports or CN1/CN20.
6. Connect LAN cables to CN22 dual RJ‑45 ports.
7. Attach power via CN3 or CN4 (ATX).
8. Configure BIOS settings using Award Setup Utility.
9. Install operating system and drivers from the utility disk.
Mounting Options:
- Direct insertion into PISA/ISA backplane
- Standoff mounting within industrial chassis
- Optional PC/104 module stacking
Configuration:
- BIOS auto‑detects CPU and memory
- CMOS jumper JP5 must be set to “Short 1‑2” for normal operation
- Panel voltage (JP3) must match LCD specifications (3.3 V or 5 V)
- Watchdog timer and serial port modes configurable via jumpers
### 7. Performance & Capabilities
- CPU Performance: 300 MHz Geode GX1 with integrated graphics and audio
- Memory Bandwidth: SDRAM up to 256 MB, 66 MHz bus
- Storage Throughput: IDE ATA/33, up to 33 MB/s
- Network Performance: Dual 10/100 Mbps Ethernet interfaces with PCI bus mastering
- Display Output: Up to 1024 × 768 × 16‑bit color, shared 4 MB memory
- Audio Output: 16‑bit stereo, 3D sound support
- Serial Communication: Up to 115.2 kbps per port, RS‑232/422/485 selectable
- Watchdog Timer: Programmable 1 s – 220 s, hardware reset or NMI trigger
- Power Efficiency: Low‑power design, single +5 V DC supply, fanless operation possible
- Reliability: Hardware watchdog, battery‑backed CMOS, solid‑state storage options
Limitations:
- Maximum memory limited to 256 MB SDRAM
- VGA shared memory reduces available system RAM
- USB limited to version 1.1 (12 Mbps)
- No native PCI expansion (via PISA/ISA only)
### 8. Standards & Compliance
- Bus Standards: PCI 2.1, ISA 16‑bit, PC/104 V2.4 compliant
- Ethernet: IEEE 802.3 10/100 Base‑T compliant
- Parallel Port: IEEE 1284 EPP/ECP compatible
- Serial Ports: RS‑232/422/485 compliant (TIA/EIA standards)
- USB: USB 1.1 compliant
- Power Supply: ATX/AT compatible
- BIOS: Award Plug‑and‑Play, ACPI, APM 1.2 compatible
- Environmental: Designed for industrial temperature range (0 °C – 60 °C)
- EMC/ESD: Meets industrial ESD handling requirements (anti‑static packaging)
### 9. Additional Information
Warranty & Support:
BOSER Technology Co., Ltd. provides standard warranty coverage for manufacturing defects. Technical support, driver updates, and documentation are available through authorized distributors or the BOSER website.
Maintenance:
- Keep board free from dust and moisture.
- Use anti‑static precautions during handling.
- Ensure adequate ventilation in enclosure.
- Periodically check CMOS battery and replace if necessary.
Software & Drivers:
- VGA Driver: National Geode XpressGRAPHICS™ (Windows 95/98/NT 4.0)
- Audio Driver: National XpressAudio™ (Windows NT 4.0)
- Network Driver: Realtek RTL8100/8139 Fast Ethernet Adapter (Windows 98/NT 4.0)
- BIOS Utility: Award Flash BIOS update tool
Documentation & Updates:
- User’s Manual (Edition 1.3, July 2003)
- Utility Disk with drivers and installation guides
- BIOS and driver updates available from BOSER Technology
Safety Notes:
- Handle only with proper ESD protection (wrist strap, grounded surface).
- Do not power the board without verifying jumper settings.
- Disconnect power before inserting or removing CompactFlash™ or DiskOnChip™ modules.
### Summary
The BOSER HS‑5230/CF is a compact, reliable, and feature‑rich industrial single board computer designed for embedded control and automation environments. Powered by the Cyrix Geode GX1 300 MHz processor, it offers a balanced combination of low power consumption and sufficient computing performance for industrial tasks. Its dual Ethernet interfaces, integrated VGA/LCD controller, audio subsystem, and extensive I/O connectivity make it a versatile platform for system integrators and OEMs seeking long‑term availability and legacy bus compatibility.
With support for CompactFlash™ and DiskOnChip™ solid‑state storage, PC/104 expansion, and a hardware watchdog timer, the HS‑5230/CF ensures dependable operation in unmanned or mission‑critical applications. Its compliance with industrial standards and flexible BIOS configuration further enhance its adaptability across a wide range of embedded computing solutions.
### 1. Product Overview
Product Name: HS‑5230/CF
Model: HS‑5230 (CompactFlash version)
Series: PISA Slot CPU Board Series
Article Number: HS‑5230/CF
Manufacturer: BOSER Technology Co., Ltd.
Edition: 1.3 (July 28, 2003)
The BOSER HS‑5230/CF is an industrial single board computer (SBC) designed for embedded and automation applications requiring low power consumption, high reliability, and extensive I/O integration. It is a PISA slot CPU card built around the Cyrix® Geode GX1 300 MHz processor, integrating dual Ethernet LAN, VGA/LCD display, audio, serial and parallel ports, USB, PC/104 expansion, and CompactFlash™ storage support. The board operates on a single +5 V DC supply and interfaces with both PISA and ISA buses, making it ideal for legacy‑compatible industrial systems.
### 2. Key Features
- Processor: Cyrix Geode GX1 300 MHz low‑power CPU
- Chipset: Cyrix Geode GX1 with CX5530 companion chipset
- Memory: One 168‑pin DIMM socket supporting up to 256 MB SDRAM
- Display: Integrated Cyrix CX5530 VGA controller with 4 MB shared memory, supporting CRT and LCD panels up to 1024 × 768 @ 16‑bit color
- Networking: Dual Realtek RTL8100 10/100 Base‑T Ethernet controllers
- Audio: Integrated Cyrix CX5530 3D audio controller with Line‑In, Line‑Out, and Mic‑In connectors
- Storage Interfaces:
- Two IDE channels (ATA/33, up to 33 MB/s)
- One FDD interface (supports two floppy drives)
- CompactFlash™ socket (IDE interface)
- DiskOnChip™ socket (up to 288 MB)
- Serial Communication: Four COM ports (3 × RS‑232, 1 × RS‑232/422/485 selectable)
- Parallel Port: One EPP/ECP/SPP‑compatible parallel interface
- USB: Two USB 1.1 ports
- PC/104 Expansion: 16‑bit ISA bus compatible PC/104 connectors
- Watchdog Timer: Hardware WDT with programmable timeouts (1 s – 220 s) and reset/NMI options
- Digital I/O: 4‑bit GPIO port for user‑defined control
- Power: Single +5 V DC input (2 A typical)
- Form Factor: PISA slot CPU card, 185 mm × 122 mm
- Operating Temperature: 0 °C – 60 °C
The HS‑5230/CF integrates all essential PC functions on a single board, providing a compact, fan‑less, and cost‑effective solution for industrial control, automation, and embedded computing.
### 3. Technical Specifications
| Parameter | Specification |
|----------------|------------------|
| CPU | Cyrix Geode GX1 300 MHz |
| Chipset | Cyrix GX1 + CX5530 |
| Memory | 1 × 168‑pin DIMM, up to 256 MB SDRAM |
| Bus Interface | PCI‑ISA (PISA slot) |
| I/O Chipset | Winbond W83977, NS97317 |
| Display | Cyrix CX5530 VGA, 4 MB shared memory, CRT/LCD up to 1024 × 768 × 16‑bit |
| LAN | Dual Realtek RTL8100 10/100 Base‑T Ethernet |
| Audio | Cyrix CX5530 3D audio controller |
| Serial Ports | 3 × RS‑232, 1 × RS‑232/422/485 (16C550 UART, 16‑byte FIFO) |
| Parallel Port | 1 × EPP/ECP/SPP bi‑directional |
| USB Ports | 2 × USB 1.1 |
| IDE Interface | 2 × 40‑pin connectors, ATA/33, supports two drives |
| FDD Interface | 1 × 34‑pin connector, supports two floppy drives |
| CompactFlash™ | 1 × IDE‑type CF socket (J1, solder side) |
| DiskOnChip™ | 1 × DOC socket, up to 288 MB |
| PC/104 Bus | 16‑bit ISA compatible |
| IrDA | 1 × 5‑pin header |
| GPIO | 4‑bit digital I/O (CN8) |
| Watchdog Timer | 1 s – 220 s, Reset or NMI selectable |
| BIOS | Award PnP Flash BIOS |
| Power Input | +5 V DC (2 A typical) |
| Connectors | ATX 5‑pin, 2‑pin power switch, fan header |
| Dimensions | 185 mm × 121 mm |
| Operating Temp. | 0 °C – 60 °C |
| Storage Temp. | ‑20 °C – 80 °C (typical) |
| Weight | Approx. 0.35 kg (board only) |
### 4. Functionality
The HS‑5230/CF operates as a full‑featured industrial PC on a single board. It integrates CPU, memory, storage, display, networking, and I/O interfaces, allowing direct installation into PISA or ISA backplanes. The board supports both CRT and LCD displays, dual Ethernet networking, and multiple serial communication standards for industrial device interfacing.
Typical Applications:
- Industrial automation controllers
- Human‑machine interfaces (HMI)
- Data acquisition systems
- Networked embedded controllers
- Legacy ISA‑based control systems
- Kiosk and digital signage systems
Compatibility:
- Supports DOS, Windows 95/98/NT 4.0, and other x86‑compatible operating systems
- Compatible with standard PC peripherals and PC/104 expansion modules
- BIOS supports Plug‑and‑Play, power management, and IDE auto‑detection
### 5. Components & Accessories
Included in Standard Package:
- HS‑5230/CF single board computer
- IDE flat cable (40‑pin)
- FDD flat cable (34‑pin)
- Sound connector cable with bracket
- Two COM port cables with brackets
- Printer port cable with bracket
- 5‑pin ATX power connector cable
- Utility disk (drivers and utilities)
- User’s manual
Optional Accessories:
- CompactFlash™ adapter (J1 soldered)
- DiskOnChip™ module (up to 288 MB)
- PC/104 expansion modules
- Panel cables for LCD connection
- Additional serial/parallel port brackets
Connectors Overview:
- CN1: 5‑pin keyboard connector
- CN2: Front panel signal connector (Reset, Speaker, HDD LED)
- CN3: 2‑pin +5 V power input
- CN4: 5‑pin ATX power control
- CN5: 2‑pin ATX power switch
- CN6: 44‑pin LCD panel connector
- CN7: 40‑pin IDE connector
- CN9: 34‑pin FDD connector
- CN10/CN11: PC/104 connectors (64‑pin + 40‑pin)
- CN12: 26‑pin parallel port
- CN13–CN18: COM1–COM4 connectors
- CN19: DB‑15 CRT connector
- CN20/CN21: PS/2 keyboard/mouse connectors
- CN22: Dual RJ‑45 LAN connector
- JP1: IrDA header
- JP2: USB header (2 ports)
- JP3: Panel voltage select (3.3 V/5 V)
- JP4/JP7: Audio Line‑Out/Line‑In connectors
- JP5: CMOS clear jumper
- JP6: DiskOnChip address & WDT period select
- JP8/JP9: RS‑232/422/485 mode select
- JP10: Watchdog active type select
- JP11/JP12: RS‑422/485 transceiver control
- FN1: Fan power connector
### 6. Installation & Setup
Requirements:
- +5 V DC regulated power supply (2 A minimum)
- PISA or ISA backplane slot
- Anti‑static handling precautions (ESD protection required)
Installation Steps:
1. Verify jumper settings (JP3–JP12) according to system configuration.
2. Install SDRAM module (up to 256 MB) in DIMM socket DM1.
3. Connect IDE/FDD cables to storage devices.
4. Attach display via CN19 (CRT) or CN6 (LCD).
5. Connect keyboard/mouse via PS/2 ports or CN1/CN20.
6. Connect LAN cables to CN22 dual RJ‑45 ports.
7. Attach power via CN3 or CN4 (ATX).
8. Configure BIOS settings using Award Setup Utility.
9. Install operating system and drivers from the utility disk.
Mounting Options:
- Direct insertion into PISA/ISA backplane
- Standoff mounting within industrial chassis
- Optional PC/104 module stacking
Configuration:
- BIOS auto‑detects CPU and memory
- CMOS jumper JP5 must be set to “Short 1‑2” for normal operation
- Panel voltage (JP3) must match LCD specifications (3.3 V or 5 V)
- Watchdog timer and serial port modes configurable via jumpers
### 7. Performance & Capabilities
- CPU Performance: 300 MHz Geode GX1 with integrated graphics and audio
- Memory Bandwidth: SDRAM up to 256 MB, 66 MHz bus
- Storage Throughput: IDE ATA/33, up to 33 MB/s
- Network Performance: Dual 10/100 Mbps Ethernet interfaces with PCI bus mastering
- Display Output: Up to 1024 × 768 × 16‑bit color, shared 4 MB memory
- Audio Output: 16‑bit stereo, 3D sound support
- Serial Communication: Up to 115.2 kbps per port, RS‑232/422/485 selectable
- Watchdog Timer: Programmable 1 s – 220 s, hardware reset or NMI trigger
- Power Efficiency: Low‑power design, single +5 V DC supply, fanless operation possible
- Reliability: Hardware watchdog, battery‑backed CMOS, solid‑state storage options
Limitations:
- Maximum memory limited to 256 MB SDRAM
- VGA shared memory reduces available system RAM
- USB limited to version 1.1 (12 Mbps)
- No native PCI expansion (via PISA/ISA only)
### 8. Standards & Compliance
- Bus Standards: PCI 2.1, ISA 16‑bit, PC/104 V2.4 compliant
- Ethernet: IEEE 802.3 10/100 Base‑T compliant
- Parallel Port: IEEE 1284 EPP/ECP compatible
- Serial Ports: RS‑232/422/485 compliant (TIA/EIA standards)
- USB: USB 1.1 compliant
- Power Supply: ATX/AT compatible
- BIOS: Award Plug‑and‑Play, ACPI, APM 1.2 compatible
- Environmental: Designed for industrial temperature range (0 °C – 60 °C)
- EMC/ESD: Meets industrial ESD handling requirements (anti‑static packaging)
### 9. Additional Information
Warranty & Support:
BOSER Technology Co., Ltd. provides standard warranty coverage for manufacturing defects. Technical support, driver updates, and documentation are available through authorized distributors or the BOSER website.
Maintenance:
- Keep board free from dust and moisture.
- Use anti‑static precautions during handling.
- Ensure adequate ventilation in enclosure.
- Periodically check CMOS battery and replace if necessary.
Software & Drivers:
- VGA Driver: National Geode XpressGRAPHICS™ (Windows 95/98/NT 4.0)
- Audio Driver: National XpressAudio™ (Windows NT 4.0)
- Network Driver: Realtek RTL8100/8139 Fast Ethernet Adapter (Windows 98/NT 4.0)
- BIOS Utility: Award Flash BIOS update tool
Documentation & Updates:
- User’s Manual (Edition 1.3, July 2003)
- Utility Disk with drivers and installation guides
- BIOS and driver updates available from BOSER Technology
Safety Notes:
- Handle only with proper ESD protection (wrist strap, grounded surface).
- Do not power the board without verifying jumper settings.
- Disconnect power before inserting or removing CompactFlash™ or DiskOnChip™ modules.
### Summary
The BOSER HS‑5230/CF is a compact, reliable, and feature‑rich industrial single board computer designed for embedded control and automation environments. Powered by the Cyrix Geode GX1 300 MHz processor, it offers a balanced combination of low power consumption and sufficient computing performance for industrial tasks. Its dual Ethernet interfaces, integrated VGA/LCD controller, audio subsystem, and extensive I/O connectivity make it a versatile platform for system integrators and OEMs seeking long‑term availability and legacy bus compatibility.
With support for CompactFlash™ and DiskOnChip™ solid‑state storage, PC/104 expansion, and a hardware watchdog timer, the HS‑5230/CF ensures dependable operation in unmanned or mission‑critical applications. Its compliance with industrial standards and flexible BIOS configuration further enhance its adaptability across a wide range of embedded computing solutions.
No manuals/catalogs available.
No accessories available.