LOOKING FOR THE RIGHT
INDUSTRIAL SOLUTION?
Discover embedded, communication and automation solutions tailored to your application.
- High‑Speed Wireless Connectivity: Supports IEEE 802.11a/b/g/n standards with data rates up to 300 Mbps (40 MHz channel width).
- Multiple Operating Modes: Configurable as Access Point (AP), Client, Bridge, or AP‑Client for flexible deployment.
- Dual Ethernet Ports: Two 10/100Base‑T(X) RJ‑45 ports with auto MDI/MDI‑X for daisy‑chain topology, reducing switch port usage.
- PoE Power Device (IAP‑620+ only): ETH2 port fully compliant with IEEE 802.3af Power Device specification, supporting overload and short‑circuit protection.
- Redundant Power Inputs: Dual 12–48 VDC inputs on a 6‑pin terminal block with reverse polarity and overload protection.
- Industrial‑Grade Design: IP‑30 metal enclosure, DIN‑rail and wall‑mount options, vibration and shock resistance per IEC60068 standards.
- Advanced Security: WEP (64/128‑bit), WPA/WPA2 (TKIP/AES), WPA‑PSK/WPA2‑PSK, and 802.1X authentication.
- Fast Roaming: X‑Roaming technology with roaming latency <100 ms.
- Network Redundancy: Dual Ethernet redundant mode with recovery time <10 ms.
- Comprehensive Management: Web‑based GUI (HTTP/HTTPS), SNMP v1/v2, Syslog, Email, and ORing’s Open‑Vision Windows utility.
- Event Notification: Supports Syslog, Email, SNMP Trap, relay output, and audible beeper alerts.
- Environmental Tolerance: Operating temperature −10 °C to +60 °C; storage −40 °C to +85 °C; humidity 5–95% non‑condensing.
- Regulatory Compliance: Meets FCC, CE, EN, and IEC industrial standards for EMI/EMS, vibration, and safety.
- Multiple Operating Modes: Configurable as Access Point (AP), Client, Bridge, or AP‑Client for flexible deployment.
- Dual Ethernet Ports: Two 10/100Base‑T(X) RJ‑45 ports with auto MDI/MDI‑X for daisy‑chain topology, reducing switch port usage.
- PoE Power Device (IAP‑620+ only): ETH2 port fully compliant with IEEE 802.3af Power Device specification, supporting overload and short‑circuit protection.
- Redundant Power Inputs: Dual 12–48 VDC inputs on a 6‑pin terminal block with reverse polarity and overload protection.
- Industrial‑Grade Design: IP‑30 metal enclosure, DIN‑rail and wall‑mount options, vibration and shock resistance per IEC60068 standards.
- Advanced Security: WEP (64/128‑bit), WPA/WPA2 (TKIP/AES), WPA‑PSK/WPA2‑PSK, and 802.1X authentication.
- Fast Roaming: X‑Roaming technology with roaming latency <100 ms.
- Network Redundancy: Dual Ethernet redundant mode with recovery time <10 ms.
- Comprehensive Management: Web‑based GUI (HTTP/HTTPS), SNMP v1/v2, Syslog, Email, and ORing’s Open‑Vision Windows utility.
- Event Notification: Supports Syslog, Email, SNMP Trap, relay output, and audible beeper alerts.
- Environmental Tolerance: Operating temperature −10 °C to +60 °C; storage −40 °C to +85 °C; humidity 5–95% non‑condensing.
- Regulatory Compliance: Meets FCC, CE, EN, and IEC industrial standards for EMI/EMS, vibration, and safety.
Comprehensive Product Summary – ORing IAP‑620 Industrial Wireless Access Point
### 1. Product Overview
Product Name: ORing IAP‑620
Model: IAP‑620 / IAP‑620+
Series: IAP‑620 Series Industrial WLAN Access Points
Article Number: IAP‑620
Manufacturer: ORing Industrial Networking Corp.
Manufacturer Contact:
3F., No.542‑2, Zhongzheng Rd., Xindian Dist., New Taipei City 23148, Taiwan (R.O.C.)
Tel: +886‑2‑2218‑1066 | Fax: +886‑2‑2218‑1014
Website: [www.oring‑networking.com](http://www.oring-networking.com)
Email: support@oring‑networking.com
The ORing IAP‑620 Series is a family of industrial‑grade IEEE 802.11a/b/g/n wireless access points designed for rugged environments. The series includes the IAP‑620 (standard model) and IAP‑620+ (enhanced model with IEEE 802.3af PoE P.D. support). Both models provide dual 10/100Base‑T(X) Ethernet ports and robust wireless connectivity for industrial automation, transportation, and remote monitoring applications.
### 2. Key Features
- High‑Speed Wireless Connectivity: Supports IEEE 802.11a/b/g/n standards with data rates up to 300 Mbps (40 MHz channel width).
- Multiple Operating Modes: Configurable as Access Point (AP), Client, Bridge, or AP‑Client for flexible deployment.
- Dual Ethernet Ports: Two 10/100Base‑T(X) RJ‑45 ports with auto MDI/MDI‑X for daisy‑chain topology, reducing switch port usage.
- PoE Power Device (IAP‑620+ only): ETH2 port fully compliant with IEEE 802.3af Power Device specification, supporting overload and short‑circuit protection.
- Redundant Power Inputs: Dual 12–48 VDC inputs on a 6‑pin terminal block with reverse polarity and overload protection.
- Industrial‑Grade Design: IP‑30 metal enclosure, DIN‑rail and wall‑mount options, vibration and shock resistance per IEC60068 standards.
- Advanced Security: WEP (64/128‑bit), WPA/WPA2 (TKIP/AES), WPA‑PSK/WPA2‑PSK, and 802.1X authentication.
- Fast Roaming: X‑Roaming technology with roaming latency <100 ms.
- Network Redundancy: Dual Ethernet redundant mode with recovery time <10 ms.
- Comprehensive Management: Web‑based GUI (HTTP/HTTPS), SNMP v1/v2, Syslog, Email, and ORing’s Open‑Vision Windows utility.
- Event Notification: Supports Syslog, Email, SNMP Trap, relay output, and audible beeper alerts.
- Environmental Tolerance: Operating temperature −10 °C to +60 °C; storage −40 °C to +85 °C; humidity 5–95% non‑condensing.
- Regulatory Compliance: Meets FCC, CE, EN, and IEC industrial standards for EMI/EMS, vibration, and safety.
### 3. Technical Specifications
LAN Interface:
- 2 × 10/100Base‑T(X) RJ‑45 ports, Auto MDI/MDI‑X
- Daisy‑chain switch mode supported
- PoE P.D. (IAP‑620+ only) on ETH2, IEEE 802.3af compliant
- Isolation Voltage: 1000 VDC min
- Isolation Resistance: 10⁸ Ω min
- Power consumption (PoE mode): 8 W max
WLAN Interface:
- IEEE 802.11a/b/g/n compliant
- Operating Modes: AP / Client / Bridge / AP‑Client
- Antenna Connectors: 2 × reverse SMA, external antennas (3 dBi @ 5 GHz, 2 dBi @ 2.4 GHz)
- Radio Type: DSSS, OFDM
- Modulation:
- 802.11a/n: OFDM (BPSK, QPSK, 16QAM, 64QAM)
- 802.11b: CCK, DQPSK, DBPSK
- 802.11g/n: OFDM (BPSK, QPSK, 16QAM, 64QAM)
Frequency Bands:
- US (FCC): 2.412–2.462 GHz (11 ch); 5.180–5.240 GHz & 5.745–5.825 GHz (9 ch)
- EU (ETSI): 2.412–2.472 GHz (13 ch); 5.180–5.240 GHz (4 ch)
- Japan: 2.412–2.484 GHz (13 ch); 5.180–5.240 GHz (4 ch)
- Canada: 2.412–2.462 GHz (11 ch); 5.180–5.825 GHz (21 ch total)
Transmission Rates:
- 802.11b: 1/2/5.5/11 Mbps
- 802.11a/g: 6/9/12/18/24/36/48/54 Mbps
- 802.11n (40 MHz): up to 300 Mbps
Transmit Power (Average):
- 802.11a: 13 dBm ± 1.5 dBm
- 802.11b: 16 dBm ± 1.5 dBm
- 802.11g: 14 dBm ± 1.5 dBm
- 802.11n (2.4 G @ 20 MHz): 13 dBm ± 1.5 dBm
- 802.11n (5 G @ 40 MHz): 12 dBm ± 1.5 dBm
Receiver Sensitivity:
- 802.11a/g: −68 dBm ± 2 dBm @ 54 Mbps
- 802.11b: −82 dBm ± 2 dBm @ 11 Mbps
- 802.11n (MCS15): −64 dBm @ 20 MHz; −60 dBm @ 40 MHz
Encryption & Security:
- WEP 64/128‑bit, WPA/WPA2 (TKIP/AES), WPA‑PSK/WPA2‑PSK (256‑bit key)
- 802.1X authentication via RADIUS
- SSID broadcast disable option
Power Requirements:
- Dual DC inputs: 12–48 VDC via 6‑pin terminal block
- Power consumption: 6 W typical
- Reverse polarity and overload protection
Physical Characteristics:
- Enclosure: IP‑30 rated metal housing
- Dimensions: 54.1 (W) × 106.1 (D) × 145.4 (H) mm (2.13 × 4.18 × 5.72 in)
- Weight: approx. 800 g
- Mounting: DIN‑rail or wall‑mount
Environmental:
- Operating Temperature: −10 °C to +60 °C
- Storage Temperature: −40 °C to +85 °C
- Humidity: 5–95% non‑condensing
### 4. Functionality
The IAP‑620 operates as a dual‑port industrial wireless access point bridging wired and wireless networks. It supports four functional modes:
1. Access Point (AP): Provides wireless connectivity for multiple clients.
2. Client Mode: Connects wired devices to an existing wireless network.
3. Bridge Mode (WDS): Establishes static LAN‑to‑LAN bridging between APs using Wireless Distribution System.
4. AP‑Client Mode: Enables one‑to‑many MAC mapping for transparent multi‑station connectivity.
Configuration is accessible via web browser (HTTP/HTTPS) or Open‑Vision Windows utility, which allows device discovery, configuration, and monitoring. The AP supports UPnP, SNMP, and Syslog for network management integration.
Typical applications include:
- Industrial automation and SCADA systems
- Transportation and rail communication networks
- Remote monitoring and control in harsh environments
- Wireless extension of Ethernet networks in factories or substations
### 5. Components & Accessories
Included in Package:
- IAP‑620 or IAP‑620+ main unit
- 2 × external WLAN antennas (reverse SMA)
- 1 × DIN‑rail mounting kit
- 1 × wall‑mount kit
- 6 × M3×5 screws
- 1 × 6‑pin terminal block (for power and relay)
- 1 × dust cover set
- 1 × CD (documentation and Open‑Vision utility)
- 1 × Quick Installation Guide (QIG)
Optional Accessories:
- Additional high‑gain antennas
- PoE injector (for IAP‑620+)
- Industrial power supply (12–48 VDC)
Connectors:
- 2 × RJ‑45 Ethernet ports
- 2 × reverse SMA antenna connectors
- 6‑pin terminal block (PWR1, PWR2, Relay output)
- Reset button (3 s reset, 5 s factory default)
### 6. Installation & Setup
Mounting Options:
- DIN‑Rail: Integrated rear DIN‑rail clip for quick installation.
- Step 1: Hook the spring clip onto the rail.
- Step 2: Push until a “click” confirms secure mounting.
- Wall‑Mount: Remove DIN‑rail clip, attach wall‑mount plate using included screws, and fix to wall surface.
Power Connection:
- Connect dual DC inputs (12–48 VDC) to terminal block labeled PWR1 and PWR2.
- Relay output (1 A @ 24 VDC) available for alarm signaling.
- For IAP‑620+, ETH2 can receive power via IEEE 802.3af PoE.
Configuration:
- Default IP via DHCP (auto‑assigned).
- Access web interface using default credentials (admin/admin).
- Configure SSID, channel, security, and operation mode.
- Optional management via Open‑Vision or SNMP.
LED Indicators:
- PWR1/PWR2: Red (booting), Green (normal)
- PoE: Green (PoE active)
- ETH1/ETH2: Green (100 Mbps), Amber (10 Mbps)
- WLAN Link/ACT: Green (active)
- WLAN Strength: 1–4 LEDs (signal level)
- Fault: Red (power or link failure)
### 7. Performance & Capabilities
- Wireless Throughput: Up to 300 Mbps (802.11n, 40 MHz channel)
- Roaming Performance: <100 ms handover with X‑Roaming enabled
- Ethernet Redundancy: Recovery time <10 ms in redundant mode
- PoE Isolation: 1 kVDC minimum (IAP‑620+)
- Relay Output: 1 A @ 24 VDC for fault alarms
- Power Efficiency: 6 W typical consumption ensures low heat generation
- Reliability: Designed for continuous 24/7 operation in industrial environments
- Limitations: 2.4 GHz and 5 GHz operation limited to region‑specific channels; DFS channels restricted to legacy 802.11a mode in Canada.
### 8. Standards & Compliance
EMI/EMS Compliance:
- FCC Part 15, CISPR (EN55022) Class A
- EN61000‑4‑2 (ESD), EN61000‑4‑3 (RS), EN61000‑4‑4 (EFT), EN61000‑4‑5 (Surge),
EN61000‑4‑6 (CS), EN61000‑4‑8, EN61000‑4‑11
Mechanical & Environmental:
- Shock: IEC60068‑2‑27, EN61373
- Vibration: IEC60068‑2‑6, EN61373
- Free Fall: IEC60068‑2‑32
- Rail Traffic: EN50155
- Safety: EN60950‑1
RF & Regional Compliance:
- FCC Statement: Part 15 compliant; indoor use only for 5.15–5.25 GHz band.
- Industry Canada: ICES‑003 Class B; RSS‑compliant; bilingual compliance statement included.
- CE/ETSI: Conforms to European EMC and safety directives.
Environmental Protection:
- IP‑30 enclosure for dust protection.
- Operating altitude and vibration tolerance suitable for industrial and transportation sectors.
### 9. Additional Information
Warranty:
- Standard warranty: 3 years (as specified in product documentation).
- ORing general warranty policy: up to 5 years for most products, covering defects in materials and workmanship.
- Exclusions: misuse, unauthorized modifications, or improper installation.
Support & Maintenance:
- Technical support via email (support@oring‑networking.com).
- Firmware updates available through ORing’s website.
- Configuration backup and restore supported via web interface.
- Firmware upgrade utility integrated in web GUI (do not power off during upgrade).
- System logs, SNMP traps, and Syslog integration for proactive maintenance.
Software Tools:
- Open‑Vision Utility: Windows‑based management suite for device discovery, configuration, and monitoring.
- Web Interface: Java‑based GUI accessible via HTTP/HTTPS.
- SNMP Management: Supports SNMP v1/v2, MIB‑II, and private MIBs for integration with NMS platforms.
Event & Alarm Management:
- System events can trigger notifications via Email, SNMP Trap, Syslog, or relay output.
- Fault LED and beeper provide local alerts for power or link failures.
Firmware & Configuration Management:
- Backup and restore configuration files.
- Factory reset via web interface or hardware reset button (5 s hold).
- Warm restart option for remote reboot.
Maintenance Recommendations:
- Periodically verify antenna connections and inspect for corrosion.
- Ensure adequate ventilation for heat dissipation.
- Keep firmware updated to latest version for security and performance improvements.
### Summary
The ORing IAP‑620 Series represents a robust, feature‑rich solution for industrial wireless networking. With dual Ethernet ports, flexible operation modes, and comprehensive security, it bridges wired and wireless infrastructures in demanding environments. The IAP‑620+ variant adds PoE capability for simplified deployment. Its rugged IP‑30 metal housing, wide temperature tolerance, and compliance with stringent industrial standards make it ideal for factory automation, transportation, and remote monitoring systems requiring reliable, high‑speed wireless connectivity.
Keywords for Technical Search:
IAP‑620, IAP‑620+, ORing Industrial Networking, IEEE 802.11a/b/g/n, industrial access point, dual Ethernet, PoE P.D., IP‑30, DIN‑rail, redundant power, X‑Roaming, 300 Mbps WLAN, 12–48 VDC, SNMP, Open‑Vision, EN61000‑4‑x, FCC Part 15, EN50155, industrial Wi‑Fi bridge.
### 1. Product Overview
Product Name: ORing IAP‑620
Model: IAP‑620 / IAP‑620+
Series: IAP‑620 Series Industrial WLAN Access Points
Article Number: IAP‑620
Manufacturer: ORing Industrial Networking Corp.
Manufacturer Contact:
3F., No.542‑2, Zhongzheng Rd., Xindian Dist., New Taipei City 23148, Taiwan (R.O.C.)
Tel: +886‑2‑2218‑1066 | Fax: +886‑2‑2218‑1014
Website: [www.oring‑networking.com](http://www.oring-networking.com)
Email: support@oring‑networking.com
The ORing IAP‑620 Series is a family of industrial‑grade IEEE 802.11a/b/g/n wireless access points designed for rugged environments. The series includes the IAP‑620 (standard model) and IAP‑620+ (enhanced model with IEEE 802.3af PoE P.D. support). Both models provide dual 10/100Base‑T(X) Ethernet ports and robust wireless connectivity for industrial automation, transportation, and remote monitoring applications.
### 2. Key Features
- High‑Speed Wireless Connectivity: Supports IEEE 802.11a/b/g/n standards with data rates up to 300 Mbps (40 MHz channel width).
- Multiple Operating Modes: Configurable as Access Point (AP), Client, Bridge, or AP‑Client for flexible deployment.
- Dual Ethernet Ports: Two 10/100Base‑T(X) RJ‑45 ports with auto MDI/MDI‑X for daisy‑chain topology, reducing switch port usage.
- PoE Power Device (IAP‑620+ only): ETH2 port fully compliant with IEEE 802.3af Power Device specification, supporting overload and short‑circuit protection.
- Redundant Power Inputs: Dual 12–48 VDC inputs on a 6‑pin terminal block with reverse polarity and overload protection.
- Industrial‑Grade Design: IP‑30 metal enclosure, DIN‑rail and wall‑mount options, vibration and shock resistance per IEC60068 standards.
- Advanced Security: WEP (64/128‑bit), WPA/WPA2 (TKIP/AES), WPA‑PSK/WPA2‑PSK, and 802.1X authentication.
- Fast Roaming: X‑Roaming technology with roaming latency <100 ms.
- Network Redundancy: Dual Ethernet redundant mode with recovery time <10 ms.
- Comprehensive Management: Web‑based GUI (HTTP/HTTPS), SNMP v1/v2, Syslog, Email, and ORing’s Open‑Vision Windows utility.
- Event Notification: Supports Syslog, Email, SNMP Trap, relay output, and audible beeper alerts.
- Environmental Tolerance: Operating temperature −10 °C to +60 °C; storage −40 °C to +85 °C; humidity 5–95% non‑condensing.
- Regulatory Compliance: Meets FCC, CE, EN, and IEC industrial standards for EMI/EMS, vibration, and safety.
### 3. Technical Specifications
LAN Interface:
- 2 × 10/100Base‑T(X) RJ‑45 ports, Auto MDI/MDI‑X
- Daisy‑chain switch mode supported
- PoE P.D. (IAP‑620+ only) on ETH2, IEEE 802.3af compliant
- Isolation Voltage: 1000 VDC min
- Isolation Resistance: 10⁸ Ω min
- Power consumption (PoE mode): 8 W max
WLAN Interface:
- IEEE 802.11a/b/g/n compliant
- Operating Modes: AP / Client / Bridge / AP‑Client
- Antenna Connectors: 2 × reverse SMA, external antennas (3 dBi @ 5 GHz, 2 dBi @ 2.4 GHz)
- Radio Type: DSSS, OFDM
- Modulation:
- 802.11a/n: OFDM (BPSK, QPSK, 16QAM, 64QAM)
- 802.11b: CCK, DQPSK, DBPSK
- 802.11g/n: OFDM (BPSK, QPSK, 16QAM, 64QAM)
Frequency Bands:
- US (FCC): 2.412–2.462 GHz (11 ch); 5.180–5.240 GHz & 5.745–5.825 GHz (9 ch)
- EU (ETSI): 2.412–2.472 GHz (13 ch); 5.180–5.240 GHz (4 ch)
- Japan: 2.412–2.484 GHz (13 ch); 5.180–5.240 GHz (4 ch)
- Canada: 2.412–2.462 GHz (11 ch); 5.180–5.825 GHz (21 ch total)
Transmission Rates:
- 802.11b: 1/2/5.5/11 Mbps
- 802.11a/g: 6/9/12/18/24/36/48/54 Mbps
- 802.11n (40 MHz): up to 300 Mbps
Transmit Power (Average):
- 802.11a: 13 dBm ± 1.5 dBm
- 802.11b: 16 dBm ± 1.5 dBm
- 802.11g: 14 dBm ± 1.5 dBm
- 802.11n (2.4 G @ 20 MHz): 13 dBm ± 1.5 dBm
- 802.11n (5 G @ 40 MHz): 12 dBm ± 1.5 dBm
Receiver Sensitivity:
- 802.11a/g: −68 dBm ± 2 dBm @ 54 Mbps
- 802.11b: −82 dBm ± 2 dBm @ 11 Mbps
- 802.11n (MCS15): −64 dBm @ 20 MHz; −60 dBm @ 40 MHz
Encryption & Security:
- WEP 64/128‑bit, WPA/WPA2 (TKIP/AES), WPA‑PSK/WPA2‑PSK (256‑bit key)
- 802.1X authentication via RADIUS
- SSID broadcast disable option
Power Requirements:
- Dual DC inputs: 12–48 VDC via 6‑pin terminal block
- Power consumption: 6 W typical
- Reverse polarity and overload protection
Physical Characteristics:
- Enclosure: IP‑30 rated metal housing
- Dimensions: 54.1 (W) × 106.1 (D) × 145.4 (H) mm (2.13 × 4.18 × 5.72 in)
- Weight: approx. 800 g
- Mounting: DIN‑rail or wall‑mount
Environmental:
- Operating Temperature: −10 °C to +60 °C
- Storage Temperature: −40 °C to +85 °C
- Humidity: 5–95% non‑condensing
### 4. Functionality
The IAP‑620 operates as a dual‑port industrial wireless access point bridging wired and wireless networks. It supports four functional modes:
1. Access Point (AP): Provides wireless connectivity for multiple clients.
2. Client Mode: Connects wired devices to an existing wireless network.
3. Bridge Mode (WDS): Establishes static LAN‑to‑LAN bridging between APs using Wireless Distribution System.
4. AP‑Client Mode: Enables one‑to‑many MAC mapping for transparent multi‑station connectivity.
Configuration is accessible via web browser (HTTP/HTTPS) or Open‑Vision Windows utility, which allows device discovery, configuration, and monitoring. The AP supports UPnP, SNMP, and Syslog for network management integration.
Typical applications include:
- Industrial automation and SCADA systems
- Transportation and rail communication networks
- Remote monitoring and control in harsh environments
- Wireless extension of Ethernet networks in factories or substations
### 5. Components & Accessories
Included in Package:
- IAP‑620 or IAP‑620+ main unit
- 2 × external WLAN antennas (reverse SMA)
- 1 × DIN‑rail mounting kit
- 1 × wall‑mount kit
- 6 × M3×5 screws
- 1 × 6‑pin terminal block (for power and relay)
- 1 × dust cover set
- 1 × CD (documentation and Open‑Vision utility)
- 1 × Quick Installation Guide (QIG)
Optional Accessories:
- Additional high‑gain antennas
- PoE injector (for IAP‑620+)
- Industrial power supply (12–48 VDC)
Connectors:
- 2 × RJ‑45 Ethernet ports
- 2 × reverse SMA antenna connectors
- 6‑pin terminal block (PWR1, PWR2, Relay output)
- Reset button (3 s reset, 5 s factory default)
### 6. Installation & Setup
Mounting Options:
- DIN‑Rail: Integrated rear DIN‑rail clip for quick installation.
- Step 1: Hook the spring clip onto the rail.
- Step 2: Push until a “click” confirms secure mounting.
- Wall‑Mount: Remove DIN‑rail clip, attach wall‑mount plate using included screws, and fix to wall surface.
Power Connection:
- Connect dual DC inputs (12–48 VDC) to terminal block labeled PWR1 and PWR2.
- Relay output (1 A @ 24 VDC) available for alarm signaling.
- For IAP‑620+, ETH2 can receive power via IEEE 802.3af PoE.
Configuration:
- Default IP via DHCP (auto‑assigned).
- Access web interface using default credentials (admin/admin).
- Configure SSID, channel, security, and operation mode.
- Optional management via Open‑Vision or SNMP.
LED Indicators:
- PWR1/PWR2: Red (booting), Green (normal)
- PoE: Green (PoE active)
- ETH1/ETH2: Green (100 Mbps), Amber (10 Mbps)
- WLAN Link/ACT: Green (active)
- WLAN Strength: 1–4 LEDs (signal level)
- Fault: Red (power or link failure)
### 7. Performance & Capabilities
- Wireless Throughput: Up to 300 Mbps (802.11n, 40 MHz channel)
- Roaming Performance: <100 ms handover with X‑Roaming enabled
- Ethernet Redundancy: Recovery time <10 ms in redundant mode
- PoE Isolation: 1 kVDC minimum (IAP‑620+)
- Relay Output: 1 A @ 24 VDC for fault alarms
- Power Efficiency: 6 W typical consumption ensures low heat generation
- Reliability: Designed for continuous 24/7 operation in industrial environments
- Limitations: 2.4 GHz and 5 GHz operation limited to region‑specific channels; DFS channels restricted to legacy 802.11a mode in Canada.
### 8. Standards & Compliance
EMI/EMS Compliance:
- FCC Part 15, CISPR (EN55022) Class A
- EN61000‑4‑2 (ESD), EN61000‑4‑3 (RS), EN61000‑4‑4 (EFT), EN61000‑4‑5 (Surge),
EN61000‑4‑6 (CS), EN61000‑4‑8, EN61000‑4‑11
Mechanical & Environmental:
- Shock: IEC60068‑2‑27, EN61373
- Vibration: IEC60068‑2‑6, EN61373
- Free Fall: IEC60068‑2‑32
- Rail Traffic: EN50155
- Safety: EN60950‑1
RF & Regional Compliance:
- FCC Statement: Part 15 compliant; indoor use only for 5.15–5.25 GHz band.
- Industry Canada: ICES‑003 Class B; RSS‑compliant; bilingual compliance statement included.
- CE/ETSI: Conforms to European EMC and safety directives.
Environmental Protection:
- IP‑30 enclosure for dust protection.
- Operating altitude and vibration tolerance suitable for industrial and transportation sectors.
### 9. Additional Information
Warranty:
- Standard warranty: 3 years (as specified in product documentation).
- ORing general warranty policy: up to 5 years for most products, covering defects in materials and workmanship.
- Exclusions: misuse, unauthorized modifications, or improper installation.
Support & Maintenance:
- Technical support via email (support@oring‑networking.com).
- Firmware updates available through ORing’s website.
- Configuration backup and restore supported via web interface.
- Firmware upgrade utility integrated in web GUI (do not power off during upgrade).
- System logs, SNMP traps, and Syslog integration for proactive maintenance.
Software Tools:
- Open‑Vision Utility: Windows‑based management suite for device discovery, configuration, and monitoring.
- Web Interface: Java‑based GUI accessible via HTTP/HTTPS.
- SNMP Management: Supports SNMP v1/v2, MIB‑II, and private MIBs for integration with NMS platforms.
Event & Alarm Management:
- System events can trigger notifications via Email, SNMP Trap, Syslog, or relay output.
- Fault LED and beeper provide local alerts for power or link failures.
Firmware & Configuration Management:
- Backup and restore configuration files.
- Factory reset via web interface or hardware reset button (5 s hold).
- Warm restart option for remote reboot.
Maintenance Recommendations:
- Periodically verify antenna connections and inspect for corrosion.
- Ensure adequate ventilation for heat dissipation.
- Keep firmware updated to latest version for security and performance improvements.
### Summary
The ORing IAP‑620 Series represents a robust, feature‑rich solution for industrial wireless networking. With dual Ethernet ports, flexible operation modes, and comprehensive security, it bridges wired and wireless infrastructures in demanding environments. The IAP‑620+ variant adds PoE capability for simplified deployment. Its rugged IP‑30 metal housing, wide temperature tolerance, and compliance with stringent industrial standards make it ideal for factory automation, transportation, and remote monitoring systems requiring reliable, high‑speed wireless connectivity.
Keywords for Technical Search:
IAP‑620, IAP‑620+, ORing Industrial Networking, IEEE 802.11a/b/g/n, industrial access point, dual Ethernet, PoE P.D., IP‑30, DIN‑rail, redundant power, X‑Roaming, 300 Mbps WLAN, 12–48 VDC, SNMP, Open‑Vision, EN61000‑4‑x, FCC Part 15, EN50155, industrial Wi‑Fi bridge.
-
.webp)
DataSheet_IAP-620(+).pdf
PDF Catalog
-
QIG_IAP-620 Series.pdf
Manual
No accessories available.
