Comprehensive Product Summary: IES-1062FX-MM-SC Industrial Unmanaged Ethernet Switch
*(Approx. 3000 tokens / ~12,000 characters)*

---

### 1. Product Overview

Product Name: IES-1062FX-MM-SC
Model Number: IES-1062FX-MM-SC
Series: IES-1000 / IES-1062 Series – Industrial Unmanaged Ethernet Switches
Article Number: IES-1062FX-MM-SC
Manufacturer: ORing Industrial Networking Corp.
Product Type: Industrial-grade unmanaged Ethernet switch with fiber and copper interfaces

The IES-1062FX-MM-SC is part of ORing’s IES-1000 series of rugged, unmanaged industrial Ethernet switches designed for harsh environments and mission-critical networking applications. This model provides 8 total ports, including 6×10/100Base‑T(X) RJ45 copper ports and 2×100Base‑FX multi‑mode fiber ports with SC connectors. It is engineered for high reliability, redundant power input, and extended temperature operation, making it suitable for industrial automation, transportation, and surveillance systems.

---

### 2. Key Features

- Unmanaged Industrial Ethernet Switch: Plug‑and‑play operation with no configuration required.
- Port Configuration:
- 6×10/100Base‑T(X) RJ45 ports (Auto MDI/MDIX)
- 2×100Base‑FX multi‑mode fiber ports (SC connector, 1310 nm wavelength, 2 km transmission distance)
- Triple Redundant Power Inputs:
- Two DC terminal block inputs (12–48 VDC)
- One DC power jack (12–45 VDC)
- Automatic failover ensures uninterrupted operation during power loss.
- Industrial‑Grade Design:
- IP30‑rated metal enclosure for protection against dust and mechanical impact.
- DIN‑rail and panel mounting options for flexible installation.
- Wide Operating Temperature Range: –40 °C to +70 °C for extreme industrial environments.
- High Immunity to Electrical Disturbances:
- ESD protection up to 4 kV on Ethernet ports.
- Surge protection up to 2000 VDC on power inputs.
- Low Power Consumption: Typical consumption around 8 W.
- Compact Form Factor: 52 mm (W) × 106 mm (D) × 144 mm (H).
- Reliability Enhancements:
- Store‑and‑forward switching architecture.
- Redundant power with relay alarm output for fault notification.
- Compliance and Safety: Meets CE, FCC, and EN60950‑1 standards.
- Warranty: 5 years manufacturer warranty.

---

### 3. Technical Specifications

Physical Characteristics
- Enclosure: IP30‑rated metal housing
- Dimensions: 52 (W) × 106 (D) × 144 (H) mm (2.05 × 4.17 × 5.67 in.)
- Weight: Approximately 680 g
- Mounting: DIN‑rail and panel mounting supported

Ports and Interfaces
- Copper Ports: 6×10/100Base‑T(X) RJ45, Auto‑negotiation, Auto MDI/MDIX
- Fiber Ports: 2×100Base‑FX multi‑mode, SC connector, 1310 nm wavelength, 2 km distance
- LED Indicators:
- Power 1 / Power 2 / Power 3 (Green)
- Fault (Amber)
- Link/Activity (Green) per port
- Duplex/Collision (Amber) per port

Power System
- Input Voltage: 12–48 VDC (terminal block), 12–45 VDC (power jack)
- Power Inputs: Triple redundant (PWR1, PWR2, PWR3)
- Power Consumption: ~8 W typical
- Protection:
- Overload current protection
- Reverse polarity protection
- Surge protection 2000 VDC
- Relay Output: 1 A @ 24 VDC for power failure alarm

Environmental Conditions
- Operating Temperature: –40 °C to +70 °C (–40 °F to +158 °F)
- Storage Temperature: –40 °C to +85 °C (–40 °F to +185 °F)
- Operating Humidity: 5 %–95 % non‑condensing
- Cooling: Passive, fanless design

Performance
- Switching Architecture: Store‑and‑forward
- MAC Address Table: 2048 entries
- Switching Capacity: 1.6 Gbps (non‑blocking)
- Packet Buffer Memory: Optimized for industrial traffic (typical 1 Mbit)
- Latency: <10 µs for 64‑byte packets
- Transmission Distance:
- Copper: up to 100 m (Cat5e/Cat6 cable)
- Fiber: up to 2 km (multi‑mode, 1310 nm)

---

### 4. Functionality

The IES‑1062FX‑MM‑SC operates as an unmanaged Layer 2 Ethernet switch, automatically forwarding Ethernet frames between connected devices without requiring configuration. It supports auto‑negotiation for speed and duplex mode, and auto MDI/MDIX for cable type detection, simplifying deployment.

Typical Use Cases:
- Industrial automation networks connecting PLCs, HMIs, and sensors.
- IP surveillance systems linking cameras and NVRs.
- Transportation and traffic control systems.
- Energy and utility monitoring networks.
- Factory floor or outdoor enclosures requiring extended temperature tolerance.

Applications:
- Expanding Ethernet connectivity in control cabinets.
- Bridging copper and fiber segments in mixed‑media networks.
- Providing redundant power reliability in mission‑critical systems.

Compatibility:
- Fully compliant with IEEE 802.3 (10Base‑T), IEEE 802.3u (100Base‑TX/FX), and IEEE 802.3x (Flow Control).
- Interoperable with standard Ethernet devices, switches, and routers.
- Supports both multi‑mode fiber (SC) and standard twisted‑pair copper cabling.

---

### 5. Components & Accessories

Included Items:
- IES‑1062FX‑MM‑SC switch unit
- DIN‑rail mounting kit (45 mm rail)
- Wall‑mounting kit (optional in some packages)
- Flat screws (M3 × 5)
- Quick Installation Guide (QIG)
- Dust covers for RJ45 and fiber ports

Optional Accessories:
- Panel mounting brackets
- External DC power supply (12–48 VDC)
- Fiber patch cords (SC‑SC, multi‑mode)
- Grounding wire and terminal block connectors

Connectors:
- Terminal Block: 7‑pin for dual DC inputs and relay output
- Power Jack: Standard DC barrel connector (12–45 VDC)
- Frame Ground: Dedicated grounding screw for EMI protection

---

### 6. Installation & Setup

Mounting Options:
- DIN‑Rail Installation:
1. Attach the DIN‑rail clip to the rear panel.
2. Hook the top of the clip onto the DIN‑rail and press the bottom until it clicks.
- Panel Mounting:
1. Use the included wall‑mount brackets.
2. Secure with M3 screws through the mounting holes.

Power Connection:
- Connect PWR1 and PWR2 to independent DC sources (12–48 VDC).
- Optionally connect PWR3 via the DC jack (12–45 VDC).
- The relay output can be wired to an external alarm system for power failure notification.

Grounding:
- Connect the frame ground terminal to earth ground to enhance surge and ESD protection.

Startup:
- Once powered, the Power LEDs illuminate.
- Link/Activity LEDs indicate port connectivity and data transmission.
- No software configuration is required; the switch begins forwarding traffic immediately.

Configuration:
- As an unmanaged device, configuration is not applicable.
- DIP switches on the unit allow enabling/disabling of the power failure relay alarm.

---

### 7. Performance & Capabilities

Switching Performance:
- Store‑and‑forward architecture ensures error‑free packet transmission.
- Supports full‑duplex and half‑duplex operation on all ports.
- IEEE 802.3x flow control prevents packet loss under heavy load.
- MAC address learning and aging for efficient traffic management.

Throughput:
- 100 Mbps per port (full‑duplex)
- Aggregate bandwidth up to 800 Mbps (6 × 100TX + 2 × 100FX)
- Non‑blocking switching fabric ensures wire‑speed forwarding.

Reliability:
- Triple redundant power inputs minimize downtime.
- Relay alarm output provides immediate fault notification.
- Fanless design eliminates mechanical failure points.
- High MTBF (> 300,000 hours typical) for continuous industrial operation.

Efficiency:
- Low power consumption (~8 W) reduces heat generation.
- Passive cooling allows silent operation and extended component life.

Limitations:
- Unmanaged operation (no VLAN, QoS, or SNMP management).
- 100 Mbps maximum per port (no Gigabit support).
- Designed for fixed topology networks without advanced redundancy protocols.

---

### 8. Standards & Compliance

Ethernet Standards:
- IEEE 802.3 (10Base‑T)
- IEEE 802.3u (100Base‑TX/FX)
- IEEE 802.3x (Flow Control)

EMC & Safety Compliance:
- EMI: FCC Part 15 Class A, CISPR (EN55022) Class A
- EMS:
- EN61000‑4‑2 (ESD)
- EN61000‑4‑3 (RS)
- EN61000‑4‑4 (EFT)
- EN61000‑4‑5 (Surge)
- EN61000‑4‑6 (CS)
- EN61000‑4‑8 (Magnetic Field)
- EN61000‑4‑11 (Dip/Interruption)
- Shock: IEC 60068‑2‑27
- Vibration: IEC 60068‑2‑6
- Free Fall: IEC 60068‑2‑32
- Safety: EN60950‑1 (Information Technology Equipment Safety)

Environmental Compliance:
- RoHS compliant materials
- Designed for industrial EMC immunity and safety

Certifications:
- CE Marking
- FCC Certification
- EN60950‑1 Safety Approval

---

### 9. Additional Information

Warranty:
- 5‑year limited hardware warranty from ORing Industrial Networking Corp.

Support & Maintenance:
- Technical support via email: support@oring-networking.com
- Documentation and firmware resources available at: [www.oring-networking.com](https://www.oring-networking.com)
- Maintenance involves periodic inspection of power connections and grounding integrity.
- No firmware updates required (unmanaged device).

Reliability & Lifecycle:
- Designed for 24/7 continuous operation in industrial environments.
- MTBF rated for long‑term deployment in automation and transportation systems.
- Passive cooling and solid‑state design ensure minimal maintenance.

Manufacturer Contact:
- ORing Industrial Networking Corp.
- Tel: +886‑2‑2218‑1066
- Fax: +886‑2‑2218‑1014
- Website: [www.oring-networking.com](https://www.oring-networking.com)

---

### Summary Table

| Parameter | Specification |
|----------------|-------------------|
| Model | IES‑1062FX‑MM‑SC |
| Series | IES‑1000 / IES‑1062 Series |
| Manufacturer | ORing Industrial Networking Corp. |
| Ports | 6×10/100Base‑T(X) RJ45 + 2×100Base‑FX MM SC |
| Fiber Type | Multi‑mode, 1310 nm, 2 km |
| Connector Type | SC |
| Switching Method | Store‑and‑forward |
| MAC Table | 2048 entries |
| Power Inputs | 3 (2×terminal block, 1×DC jack) |
| Input Voltage | 12–48 VDC (terminal), 12–45 VDC (jack) |
| Power Consumption | ~8 W |
| Protection | ESD 4 kV, Surge 2000 VDC, Reverse polarity |
| Enclosure | IP30 metal |
| Dimensions | 52 × 106 × 144 mm |
| Weight | ~680 g |
| Mounting | DIN‑rail / Panel |
| Operating Temp. | –40 °C to +70 °C |
| Storage Temp. | –40 °C to +85 °C |
| Humidity | 5 %–95 % non‑condensing |
| Certifications | CE, FCC, EN60950‑1 |
| Warranty | 5 years |

---

### Conclusion

The ORing IES‑1062FX‑MM‑SC is a robust, industrial‑grade unmanaged Ethernet switch engineered for reliability and performance in demanding environments. Its combination of 6 copper ports and 2 multi‑mode fiber ports provides flexible connectivity for mixed‑media networks. The triple redundant power inputs, wide temperature tolerance, and IP30‑rated metal housing ensure continuous operation in harsh industrial conditions.

With compliance to international EMC and safety standards, low power consumption, and a 5‑year warranty, the IES‑1062FX‑MM‑SC is an ideal solution for industrial automation, transportation, and surveillance applications requiring dependable Ethernet connectivity without the complexity of managed switch configuration.