LOOKING FOR THE RIGHT
INDUSTRIAL SOLUTION?
Discover embedded, communication and automation solutions tailored to your application.
- 6-Port Configuration:
4 × 10/100Base-T(X) RJ45 ports with PoE P.S.E. capability and 2 × 100Base-FX multi-mode fiber ports (SC connectors).
- PoE Power Sourcing Equipment (P.S.E.):
Compliant with IEEE 802.3at standard, each PoE port delivers up to 30W, with a total power budget of 120W. Enables simultaneous data and power transmission over standard Ethernet cabling.
- Redundant Power Inputs:
Dual DC power inputs (24–36VDC) on a 6-pin terminal block ensure uninterrupted operation. Automatic failover between primary and backup power sources prevents downtime.
- Rugged Industrial Design:
IP-30 rated metal enclosure for protection against dust and mechanical stress. Designed for vibration, shock, and free-fall resistance per IEC60068 standards.
- Wide Operating Temperature Range:
Operates reliably from -40°C to +70°C, suitable for outdoor and factory environments.
- Compact Form Factor:
Slim housing (41 × 94.9 × 144.3 mm) optimized for DIN-rail or wall mounting in control cabinets.
- Relay Output Alarm:
Configurable relay output (1A @ 24VDC) for power failure or fault notification.
- LED Indicators:
Comprehensive LED panel for power, fault, link/activity, and PoE status monitoring.
- High Reliability:
Store-and-forward switching architecture with 2048 MAC address table and IEEE 802.3x flow control for stable data transmission.
- Surge and Overload Protection:
Built-in overload current protection and surge suppression for enhanced durability.
4 × 10/100Base-T(X) RJ45 ports with PoE P.S.E. capability and 2 × 100Base-FX multi-mode fiber ports (SC connectors).
- PoE Power Sourcing Equipment (P.S.E.):
Compliant with IEEE 802.3at standard, each PoE port delivers up to 30W, with a total power budget of 120W. Enables simultaneous data and power transmission over standard Ethernet cabling.
- Redundant Power Inputs:
Dual DC power inputs (24–36VDC) on a 6-pin terminal block ensure uninterrupted operation. Automatic failover between primary and backup power sources prevents downtime.
- Rugged Industrial Design:
IP-30 rated metal enclosure for protection against dust and mechanical stress. Designed for vibration, shock, and free-fall resistance per IEC60068 standards.
- Wide Operating Temperature Range:
Operates reliably from -40°C to +70°C, suitable for outdoor and factory environments.
- Compact Form Factor:
Slim housing (41 × 94.9 × 144.3 mm) optimized for DIN-rail or wall mounting in control cabinets.
- Relay Output Alarm:
Configurable relay output (1A @ 24VDC) for power failure or fault notification.
- LED Indicators:
Comprehensive LED panel for power, fault, link/activity, and PoE status monitoring.
- High Reliability:
Store-and-forward switching architecture with 2048 MAC address table and IEEE 802.3x flow control for stable data transmission.
- Surge and Overload Protection:
Built-in overload current protection and surge suppression for enhanced durability.
Comprehensive Product Summary – IPS-1042FX-MM-SC-24V Industrial Unmanaged PoE Ethernet Switch
### 1. Product Overview
Product Name: Industrial Unmanaged PoE Ethernet Switch
Model: IPS-1042FX-MM-SC-24V
Series: IPS-1042FX-24V Series
Article Number: IPS-1042FX-MM-SC-24V
Manufacturer: ORing Industrial Networking Corp.
Product Type: 6-port unmanaged industrial Ethernet switch with Power over Ethernet (PoE) capability
Version: v1.0 / June 2013
The ORing IPS-1042FX-MM-SC-24V is a rugged, industrial-grade unmanaged Ethernet switch designed for harsh environments requiring reliable data and power transmission. It integrates four 10/100Base-T(X) PoE P.S.E. (Power Sourcing Equipment) ports and two 100Base-FX multi-mode fiber ports with SC connectors. The device supports IEEE 802.3at PoE standards, providing up to 30W per port and a total power budget of 120W. It is engineered for DIN-rail or wall mounting and operates across a wide temperature range, making it ideal for industrial automation, surveillance, and transportation networks.
### 2. Key Features
- 6-Port Configuration:
4 × 10/100Base-T(X) RJ45 ports with PoE P.S.E. capability and 2 × 100Base-FX multi-mode fiber ports (SC connectors).
- PoE Power Sourcing Equipment (P.S.E.):
Compliant with IEEE 802.3at standard, each PoE port delivers up to 30W, with a total power budget of 120W. Enables simultaneous data and power transmission over standard Ethernet cabling.
- Redundant Power Inputs:
Dual DC power inputs (24–36VDC) on a 6-pin terminal block ensure uninterrupted operation. Automatic failover between primary and backup power sources prevents downtime.
- Rugged Industrial Design:
IP-30 rated metal enclosure for protection against dust and mechanical stress. Designed for vibration, shock, and free-fall resistance per IEC60068 standards.
- Wide Operating Temperature Range:
Operates reliably from -40°C to +70°C, suitable for outdoor and factory environments.
- Compact Form Factor:
Slim housing (41 × 94.9 × 144.3 mm) optimized for DIN-rail or wall mounting in control cabinets.
- Relay Output Alarm:
Configurable relay output (1A @ 24VDC) for power failure or fault notification.
- LED Indicators:
Comprehensive LED panel for power, fault, link/activity, and PoE status monitoring.
- High Reliability:
Store-and-forward switching architecture with 2048 MAC address table and IEEE 802.3x flow control for stable data transmission.
- Surge and Overload Protection:
Built-in overload current protection and surge suppression for enhanced durability.
### 3. Technical Specifications
Physical Ports:
- 4 × 10/100Base-T(X) RJ45 ports (Auto MDI/MDIX, PoE P.S.E.)
- 2 × 100Base-FX multi-mode fiber ports (SC connectors)
Fiber Optics:
- Mode: Multi-mode
- Fiber Diameter: 62.5/125 µm or 50/125 µm
- Wavelength: 1310 nm
- Typical Transmission Distance: 2 km
- Optical Power Output: Max -14 dBm, Min -23.5 dBm
- Receiver Sensitivity: -31 dBm
- Link Budget: 7.5 dB
Ethernet Standards:
- IEEE 802.3 (10Base-T)
- IEEE 802.3u (100Base-TX, 100Base-FX)
- IEEE 802.3x (Flow Control)
- IEEE 802.3at (PoE, up to 30W per port)
Switching Performance:
- MAC Address Table: 2048 entries
- Switching Method: Store-and-forward
- Flow Control: IEEE 802.3x compliant
Power:
- Input Voltage: Dual 24–36VDC (redundant inputs)
- Power Consumption: 5.4–6.48W (excluding PoE load)
- PoE Power Budget: 120W total (30W per port max)
- Overload Protection: Present
- Reverse Polarity Protection: Not present
Relay Output:
- Capacity: 1A @ 24VDC
- Function: Power failure alarm (configurable via DIP switch)
Enclosure:
- Material: Metal, IP-30 rated
- Dimensions: 41 (W) × 94.9 (D) × 144.3 (H) mm
- Weight: 395–530 g (depending on configuration)
Environmental:
- Operating Temperature: -40°C to +70°C
- Storage Temperature: -40°C to +85°C
- Humidity: 5%–95% non-condensing
EMC and Safety:
- EMI: FCC Part 15, CISPR (EN55022) Class A
- EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
- Shock: IEC60068-2-27
- Vibration: IEC60068-2-6
- Free Fall: IEC60068-2-32
- Safety: EN60950-1
### 4. Functionality
The IPS-1042FX-MM-SC-24V functions as an unmanaged Ethernet switch, automatically forwarding packets between connected devices without requiring configuration. It supports both copper and fiber connections, enabling flexible network topologies.
Operation:
- The four RJ45 ports provide both data and power to connected PoE-enabled devices such as IP cameras, wireless access points, or VoIP phones.
- The two fiber ports extend network connectivity up to 2 km using multi-mode fiber, ideal for linking remote network segments or control rooms.
- The switch uses store-and-forward packet processing to ensure error-free data transmission.
- Redundant power inputs guarantee continuous operation; if one power source fails, the other immediately takes over.
- The relay output can trigger alarms or external systems in case of power failure.
Use Cases:
- Industrial automation and control systems
- IP surveillance networks
- Transportation and traffic monitoring
- Energy and utility substations
- Remote monitoring and SCADA systems
Compatibility:
- Compatible with standard Ethernet and PoE devices compliant with IEEE 802.3/802.3u/802.3at.
- Supports both straight-through and cross-over Ethernet cabling (auto MDI/MDIX).
### 5. Components & Accessories
Included Items:
- IPS-1042FX-MM-SC-24V switch unit
- 6-pin terminal block for power input and relay output
- DIN-rail mounting kit
- Dust covers for RJ45 ports
- Quick Installation Guide (QIG)
Optional Accessories (sold separately):
- Wall-mount kit
- Additional DIN-rail kit
- Power supplies:
- DR-45-24: 45W @ 24VDC
- DR-75-24: 75W @ 24VDC
- DR-120-24: 120W @ 24VDC
Connectors:
- RJ45 (8-pin) for 10/100Base-T(X) Ethernet
- SC connectors for 100Base-FX fiber
- 6-pin terminal block for dual DC power and relay output
PoE Pin Assignment (RJ45):
- Pin 1: TD+ / PoE Power +
- Pin 2: TD– / PoE Power +
- Pin 3: RD+ / PoE Power –
- Pin 6: RD– / PoE Power –
### 6. Installation & Setup
Mounting Options:
- DIN-Rail Mounting: Standard 35mm DIN-rail clip included for quick installation in control cabinets.
- Wall Mounting: Optional wall-mount kit available for flat-surface installations.
Power Connection:
- Connect dual DC power sources (24–36VDC) to the 6-pin terminal block.
- Ensure correct polarity before powering on (V+, V– terminals clearly marked).
- Frame ground terminal provided for safety grounding.
Network Cabling:
- Copper Ports: Use Cat5e or higher twisted-pair cables for 10/100Base-T(X) connections.
- Fiber Ports: Use SC-terminated multi-mode fiber cables (62.5/125 µm or 50/125 µm) for 100Base-FX connections.
DIP Switch Configuration:
- DIP-1: Power failure relay alarm disable/enable
- DIP-2: Selects which power input (PWR1, PWR2, or both) triggers the relay alarm
LED Indicators:
- Power 1 / Power 2 (Green): Indicates active power input
- Fault (Amber): Illuminates when PWR1 or PWR2 fails
- RJ45 Port (Green): Link/Activity and PoE status
- Fiber Port (Green): Link/Activity
Setup Procedure:
1. Mount the switch on DIN-rail or wall surface.
2. Connect power inputs and verify LED indicators.
3. Connect Ethernet and fiber cables.
4. Confirm link/activity LEDs for network connectivity.
5. Optionally configure DIP switches for alarm behavior.
### 7. Performance & Capabilities
Switching Capacity:
- Supports full-duplex 200 Mbps per port on 100Base-TX and 100Base-FX links.
- Store-and-forward architecture ensures low latency and error-free transmission.
PoE Performance:
- Delivers up to 30W per port (IEEE 802.3at) for powering IP cameras, access points, or other PDs.
- Total PoE power budget: 120W.
- Intelligent power distribution prevents overload.
Reliability:
- Redundant power design ensures continuous operation.
- Relay alarm output provides immediate fault notification.
- Industrial-grade components rated for extended temperature and vibration resistance.
Efficiency:
- Typical power consumption (without PoE load): 5.4–6.48W.
- Low heat generation suitable for enclosed installations.
Limitations:
- Unmanaged design—no VLAN, QoS, or SNMP management features.
- Fixed 100 Mbps fiber and copper speeds (no Gigabit support).
- Reverse polarity protection not included—requires correct wiring.
### 8. Standards & Compliance
Ethernet Standards:
- IEEE 802.3 (10Base-T)
- IEEE 802.3u (100Base-TX, 100Base-FX)
- IEEE 802.3x (Flow Control)
- IEEE 802.3at (PoE, up to 30W per port)
Electromagnetic Compatibility (EMC):
- EMI: FCC Part 15, CISPR (EN55022) Class A
- EMS:
- EN61000-4-2 (Electrostatic Discharge)
- EN61000-4-3 (Radiated Susceptibility)
- EN61000-4-4 (Electrical Fast Transient)
- EN61000-4-5 (Surge Immunity)
- EN61000-4-6 (Conducted Susceptibility)
- EN61000-4-8 (Power Frequency Magnetic Field)
- EN61000-4-11 (Voltage Dips and Interruptions)
Mechanical & Environmental Tests:
- Shock: IEC60068-2-27
- Vibration: IEC60068-2-6
- Free Fall: IEC60068-2-32
Safety Certification:
- EN60950-1 (Information Technology Equipment Safety)
Ingress Protection:
- IP-30 rated enclosure for industrial environments.
### 9. Additional Information
Warranty:
- 5-year limited warranty covering manufacturing defects and hardware reliability.
Support & Maintenance:
- Technical support available via ORing Industrial Networking Corp.
- Firmware updates not applicable (unmanaged device).
- Maintenance limited to periodic inspection of power and network connections.
Manufacturer Contact:
- ORing Industrial Networking Corp.
Tel: +886-2-2218-1066
Fax: +886-2-2218-1014
Website: [www.oring-networking.com](http://www.oring-networking.com)
Email: support@oring-networking.com
Product Lifecycle:
- Designed for long-term industrial deployment with extended MTBF and component longevity.
- Backward-compatible with existing 10/100 Ethernet infrastructure.
Environmental Responsibility:
- Device and documentation printed on recycled materials.
- Compliant with RoHS environmental directives.
### Summary
The ORing IPS-1042FX-MM-SC-24V is a robust, unmanaged industrial Ethernet switch engineered for mission-critical applications requiring both data and power delivery over Ethernet. With four PoE P.S.E. ports and two fiber uplinks, it bridges copper and fiber networks efficiently. Its redundant power design, wide temperature tolerance, and IP-30 metal housing make it ideal for deployment in demanding industrial, transportation, and surveillance environments. The device’s compliance with IEEE and IEC standards ensures interoperability, safety, and long-term reliability.
This model exemplifies ORing’s commitment to rugged networking solutions—providing dependable connectivity, simplified installation, and industrial-grade performance for modern automation and control systems.
### 1. Product Overview
Product Name: Industrial Unmanaged PoE Ethernet Switch
Model: IPS-1042FX-MM-SC-24V
Series: IPS-1042FX-24V Series
Article Number: IPS-1042FX-MM-SC-24V
Manufacturer: ORing Industrial Networking Corp.
Product Type: 6-port unmanaged industrial Ethernet switch with Power over Ethernet (PoE) capability
Version: v1.0 / June 2013
The ORing IPS-1042FX-MM-SC-24V is a rugged, industrial-grade unmanaged Ethernet switch designed for harsh environments requiring reliable data and power transmission. It integrates four 10/100Base-T(X) PoE P.S.E. (Power Sourcing Equipment) ports and two 100Base-FX multi-mode fiber ports with SC connectors. The device supports IEEE 802.3at PoE standards, providing up to 30W per port and a total power budget of 120W. It is engineered for DIN-rail or wall mounting and operates across a wide temperature range, making it ideal for industrial automation, surveillance, and transportation networks.
### 2. Key Features
- 6-Port Configuration:
4 × 10/100Base-T(X) RJ45 ports with PoE P.S.E. capability and 2 × 100Base-FX multi-mode fiber ports (SC connectors).
- PoE Power Sourcing Equipment (P.S.E.):
Compliant with IEEE 802.3at standard, each PoE port delivers up to 30W, with a total power budget of 120W. Enables simultaneous data and power transmission over standard Ethernet cabling.
- Redundant Power Inputs:
Dual DC power inputs (24–36VDC) on a 6-pin terminal block ensure uninterrupted operation. Automatic failover between primary and backup power sources prevents downtime.
- Rugged Industrial Design:
IP-30 rated metal enclosure for protection against dust and mechanical stress. Designed for vibration, shock, and free-fall resistance per IEC60068 standards.
- Wide Operating Temperature Range:
Operates reliably from -40°C to +70°C, suitable for outdoor and factory environments.
- Compact Form Factor:
Slim housing (41 × 94.9 × 144.3 mm) optimized for DIN-rail or wall mounting in control cabinets.
- Relay Output Alarm:
Configurable relay output (1A @ 24VDC) for power failure or fault notification.
- LED Indicators:
Comprehensive LED panel for power, fault, link/activity, and PoE status monitoring.
- High Reliability:
Store-and-forward switching architecture with 2048 MAC address table and IEEE 802.3x flow control for stable data transmission.
- Surge and Overload Protection:
Built-in overload current protection and surge suppression for enhanced durability.
### 3. Technical Specifications
Physical Ports:
- 4 × 10/100Base-T(X) RJ45 ports (Auto MDI/MDIX, PoE P.S.E.)
- 2 × 100Base-FX multi-mode fiber ports (SC connectors)
Fiber Optics:
- Mode: Multi-mode
- Fiber Diameter: 62.5/125 µm or 50/125 µm
- Wavelength: 1310 nm
- Typical Transmission Distance: 2 km
- Optical Power Output: Max -14 dBm, Min -23.5 dBm
- Receiver Sensitivity: -31 dBm
- Link Budget: 7.5 dB
Ethernet Standards:
- IEEE 802.3 (10Base-T)
- IEEE 802.3u (100Base-TX, 100Base-FX)
- IEEE 802.3x (Flow Control)
- IEEE 802.3at (PoE, up to 30W per port)
Switching Performance:
- MAC Address Table: 2048 entries
- Switching Method: Store-and-forward
- Flow Control: IEEE 802.3x compliant
Power:
- Input Voltage: Dual 24–36VDC (redundant inputs)
- Power Consumption: 5.4–6.48W (excluding PoE load)
- PoE Power Budget: 120W total (30W per port max)
- Overload Protection: Present
- Reverse Polarity Protection: Not present
Relay Output:
- Capacity: 1A @ 24VDC
- Function: Power failure alarm (configurable via DIP switch)
Enclosure:
- Material: Metal, IP-30 rated
- Dimensions: 41 (W) × 94.9 (D) × 144.3 (H) mm
- Weight: 395–530 g (depending on configuration)
Environmental:
- Operating Temperature: -40°C to +70°C
- Storage Temperature: -40°C to +85°C
- Humidity: 5%–95% non-condensing
EMC and Safety:
- EMI: FCC Part 15, CISPR (EN55022) Class A
- EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
- Shock: IEC60068-2-27
- Vibration: IEC60068-2-6
- Free Fall: IEC60068-2-32
- Safety: EN60950-1
### 4. Functionality
The IPS-1042FX-MM-SC-24V functions as an unmanaged Ethernet switch, automatically forwarding packets between connected devices without requiring configuration. It supports both copper and fiber connections, enabling flexible network topologies.
Operation:
- The four RJ45 ports provide both data and power to connected PoE-enabled devices such as IP cameras, wireless access points, or VoIP phones.
- The two fiber ports extend network connectivity up to 2 km using multi-mode fiber, ideal for linking remote network segments or control rooms.
- The switch uses store-and-forward packet processing to ensure error-free data transmission.
- Redundant power inputs guarantee continuous operation; if one power source fails, the other immediately takes over.
- The relay output can trigger alarms or external systems in case of power failure.
Use Cases:
- Industrial automation and control systems
- IP surveillance networks
- Transportation and traffic monitoring
- Energy and utility substations
- Remote monitoring and SCADA systems
Compatibility:
- Compatible with standard Ethernet and PoE devices compliant with IEEE 802.3/802.3u/802.3at.
- Supports both straight-through and cross-over Ethernet cabling (auto MDI/MDIX).
### 5. Components & Accessories
Included Items:
- IPS-1042FX-MM-SC-24V switch unit
- 6-pin terminal block for power input and relay output
- DIN-rail mounting kit
- Dust covers for RJ45 ports
- Quick Installation Guide (QIG)
Optional Accessories (sold separately):
- Wall-mount kit
- Additional DIN-rail kit
- Power supplies:
- DR-45-24: 45W @ 24VDC
- DR-75-24: 75W @ 24VDC
- DR-120-24: 120W @ 24VDC
Connectors:
- RJ45 (8-pin) for 10/100Base-T(X) Ethernet
- SC connectors for 100Base-FX fiber
- 6-pin terminal block for dual DC power and relay output
PoE Pin Assignment (RJ45):
- Pin 1: TD+ / PoE Power +
- Pin 2: TD– / PoE Power +
- Pin 3: RD+ / PoE Power –
- Pin 6: RD– / PoE Power –
### 6. Installation & Setup
Mounting Options:
- DIN-Rail Mounting: Standard 35mm DIN-rail clip included for quick installation in control cabinets.
- Wall Mounting: Optional wall-mount kit available for flat-surface installations.
Power Connection:
- Connect dual DC power sources (24–36VDC) to the 6-pin terminal block.
- Ensure correct polarity before powering on (V+, V– terminals clearly marked).
- Frame ground terminal provided for safety grounding.
Network Cabling:
- Copper Ports: Use Cat5e or higher twisted-pair cables for 10/100Base-T(X) connections.
- Fiber Ports: Use SC-terminated multi-mode fiber cables (62.5/125 µm or 50/125 µm) for 100Base-FX connections.
DIP Switch Configuration:
- DIP-1: Power failure relay alarm disable/enable
- DIP-2: Selects which power input (PWR1, PWR2, or both) triggers the relay alarm
LED Indicators:
- Power 1 / Power 2 (Green): Indicates active power input
- Fault (Amber): Illuminates when PWR1 or PWR2 fails
- RJ45 Port (Green): Link/Activity and PoE status
- Fiber Port (Green): Link/Activity
Setup Procedure:
1. Mount the switch on DIN-rail or wall surface.
2. Connect power inputs and verify LED indicators.
3. Connect Ethernet and fiber cables.
4. Confirm link/activity LEDs for network connectivity.
5. Optionally configure DIP switches for alarm behavior.
### 7. Performance & Capabilities
Switching Capacity:
- Supports full-duplex 200 Mbps per port on 100Base-TX and 100Base-FX links.
- Store-and-forward architecture ensures low latency and error-free transmission.
PoE Performance:
- Delivers up to 30W per port (IEEE 802.3at) for powering IP cameras, access points, or other PDs.
- Total PoE power budget: 120W.
- Intelligent power distribution prevents overload.
Reliability:
- Redundant power design ensures continuous operation.
- Relay alarm output provides immediate fault notification.
- Industrial-grade components rated for extended temperature and vibration resistance.
Efficiency:
- Typical power consumption (without PoE load): 5.4–6.48W.
- Low heat generation suitable for enclosed installations.
Limitations:
- Unmanaged design—no VLAN, QoS, or SNMP management features.
- Fixed 100 Mbps fiber and copper speeds (no Gigabit support).
- Reverse polarity protection not included—requires correct wiring.
### 8. Standards & Compliance
Ethernet Standards:
- IEEE 802.3 (10Base-T)
- IEEE 802.3u (100Base-TX, 100Base-FX)
- IEEE 802.3x (Flow Control)
- IEEE 802.3at (PoE, up to 30W per port)
Electromagnetic Compatibility (EMC):
- EMI: FCC Part 15, CISPR (EN55022) Class A
- EMS:
- EN61000-4-2 (Electrostatic Discharge)
- EN61000-4-3 (Radiated Susceptibility)
- EN61000-4-4 (Electrical Fast Transient)
- EN61000-4-5 (Surge Immunity)
- EN61000-4-6 (Conducted Susceptibility)
- EN61000-4-8 (Power Frequency Magnetic Field)
- EN61000-4-11 (Voltage Dips and Interruptions)
Mechanical & Environmental Tests:
- Shock: IEC60068-2-27
- Vibration: IEC60068-2-6
- Free Fall: IEC60068-2-32
Safety Certification:
- EN60950-1 (Information Technology Equipment Safety)
Ingress Protection:
- IP-30 rated enclosure for industrial environments.
### 9. Additional Information
Warranty:
- 5-year limited warranty covering manufacturing defects and hardware reliability.
Support & Maintenance:
- Technical support available via ORing Industrial Networking Corp.
- Firmware updates not applicable (unmanaged device).
- Maintenance limited to periodic inspection of power and network connections.
Manufacturer Contact:
- ORing Industrial Networking Corp.
Tel: +886-2-2218-1066
Fax: +886-2-2218-1014
Website: [www.oring-networking.com](http://www.oring-networking.com)
Email: support@oring-networking.com
Product Lifecycle:
- Designed for long-term industrial deployment with extended MTBF and component longevity.
- Backward-compatible with existing 10/100 Ethernet infrastructure.
Environmental Responsibility:
- Device and documentation printed on recycled materials.
- Compliant with RoHS environmental directives.
### Summary
The ORing IPS-1042FX-MM-SC-24V is a robust, unmanaged industrial Ethernet switch engineered for mission-critical applications requiring both data and power delivery over Ethernet. With four PoE P.S.E. ports and two fiber uplinks, it bridges copper and fiber networks efficiently. Its redundant power design, wide temperature tolerance, and IP-30 metal housing make it ideal for deployment in demanding industrial, transportation, and surveillance environments. The device’s compliance with IEEE and IEC standards ensures interoperability, safety, and long-term reliability.
This model exemplifies ORing’s commitment to rugged networking solutions—providing dependable connectivity, simplified installation, and industrial-grade performance for modern automation and control systems.
-
Datasheet_IPS-1042FX-24V.pdf
PDF Catalog
-
Selection_Guide.pdf
Manual
No accessories available.
