Comprehensive Product Summary – M12P‑5FA 5‑Pin M12 Female Assembled Plug (Soldering Type, A‑Coding)

---

### 1. Product Overview

Product Name: M12P‑5FA
Model Number: M12P‑5FA
Series: M12 Circular Connector Series
Article Number: M12P‑5FA
Manufacturer: ORing Industrial Networking Corp.
Product Type: 5‑Pin M12 Female Assembled Plug, Soldering Type, A‑Coding

The M12P‑5FA is a precision‑engineered industrial circular connector designed for robust signal and power transmission in harsh environments. It belongs to ORing’s M‑Series connectivity line, which is widely used in industrial automation, transportation, and networking applications. The connector provides a reliable, sealed interface for field wiring and device interconnection, ensuring long‑term performance under vibration, moisture, and temperature extremes.

---

### 2. Key Features

- 5‑Pin Female Configuration: Supports standard A‑coded pin layout for signal and low‑voltage power transmission.
- A‑Coding Standard: Ensures compatibility with a wide range of industrial sensors, actuators, and Ethernet‑based devices using A‑coded M12 interfaces.
- Soldering Type Termination: Designed for manual or automated soldering, providing secure electrical contact and long‑term reliability.
- Assembled Plug Design: Pre‑assembled housing simplifies installation and reduces assembly time.
- Rugged Construction: Engineered for industrial environments with high mechanical strength and resistance to vibration, dust, and moisture.
- IP67 Protection (when mated): Provides complete protection against dust ingress and temporary immersion in water.
- Compact Circular Form Factor: Ideal for space‑constrained applications and panel‑mount or cable‑mount configurations.
- Wide Accessory Compatibility: Fully compatible with ORing’s M‑Series cables, power supplies, RF accessories, and SFP modules for integrated system deployment.
- Industrial‑Grade Reliability: Designed for continuous operation in demanding field conditions, supporting stable connectivity in automation networks.

---

### 3. Technical Specifications

| Parameter | Specification |
|----------------|-------------------|
| Connector Type | M12 Circular Connector |
| Gender | Female |
| Number of Pins | 5 |
| Coding | A‑Coding |
| Termination Type | Soldering Type |
| Assembly Type | Assembled Plug |
| Ingress Protection | IP67 (when properly mated) |
| Contact Material | Copper alloy with gold or nickel plating (typical for M12 connectors) |
| Housing Material | Zinc alloy or nickel‑plated brass (industrial‑grade) |
| Insulator Material | High‑temperature thermoplastic |
| Operating Voltage | Typically up to 250 V AC/DC (depending on application) |
| Current Rating | Up to 4 A per contact (typical for 5‑pin A‑coded connectors) |
| Contact Resistance | ≤ 10 mΩ |
| Insulation Resistance | ≥ 100 MΩ at 500 V DC |
| Temperature Range | −40 °C to +85 °C |
| Cable Entry | Compatible with 3 – 8 mm cable outer diameter (typical) |
| Locking Mechanism | Threaded coupling, M12 × 1.0 thread |
| Vibration Resistance | IEC 60068‑2‑6 compliant |
| Shock Resistance | IEC 60068‑2‑27 compliant |
| Sealing Gasket | NBR or silicone O‑ring for environmental sealing |
| Weight | Approx. 20 – 30 g (depending on configuration) |
| Mounting Orientation | Straight or angled (depending on variant) |

---

### 4. Functionality

The M12P‑5FA connector provides a secure electrical interface between field devices and control systems. It is primarily used for transmitting analog or digital signals, low‑voltage power, or communication lines in industrial automation networks.

How It Works:
The connector’s 5‑pin A‑coded interface aligns with standard M12 pinouts used for sensors, actuators, and fieldbus devices. Each pin is soldered to the corresponding conductor in the cable, ensuring a permanent and low‑resistance connection. The threaded coupling mechanism provides mechanical stability and environmental sealing when mated with a corresponding M12 male connector.

Typical Use Cases:
- Industrial automation and control systems
- Factory machinery and robotics
- Process instrumentation and sensors
- Transportation and railway electronics
- Industrial Ethernet and fieldbus networks (e.g., PROFIBUS, DeviceNet, CANopen)
- Power and signal distribution in rugged environments

Compatibility:
The M12P‑5FA is compatible with all standard A‑coded M12 male connectors and cables, including ORing’s M12C‑5M5F‑1000 and M12C‑5M5F‑3000 IP67 cables. It can also integrate with ORing’s DIN‑rail power supplies, RF accessories, and SFP modules for complete industrial networking solutions.

---

### 5. Components & Accessories

Included Components:
- 1 × M12P‑5FA 5‑pin female connector body
- 1 × Cable gland and sealing nut
- 1 × O‑ring for IP67 sealing
- 1 × Pin insert with solder cups

Optional Accessories (from ORing product ecosystem):
- M‑Series Cables:
- *M12C‑5M5F‑1000* – 5‑pin M12 male to 5‑pin M12 female IP67 cable, 10 m, A‑coding
- *M12C‑5M5F‑3000* – 5‑pin M12 male to 5‑pin M12 female IP67 cable, 30 m, A‑coding
- *M12C‑5MDB9‑300* – 5‑pin M12 male to DB9 console cable, 3 m, A‑coding
- Power Accessories:
- *DR‑4512 / DR‑4524 / DR‑75‑12 / DR‑75‑24 / DR‑75‑48 / DR‑120‑12 / DR‑120‑24 / DR‑120‑48 / SDR‑240‑48 / SDR‑480‑48* – DIN‑rail power supplies (12 V – 48 V DC, 45 W – 480 W)
- *PAA‑121000 / PAE‑121000 / PAA‑482500 / PAE‑482500 / PAX‑482500* – Power adapters (12 V DC – 48 V DC, 12 W – 120 W)
- RF Accessories:
- *RFB‑M2‑150 / RFB‑M2‑1000* – Magnetic RF antenna bases with N‑female to SMA‑male connectors
- *RFC‑Series* – Low‑loss RF cables (SMA, N‑type connectors, 1.5 m – 10 m lengths)
- *RFP‑NF‑NM‑WAG* – High‑power RF surge protector (0 – 6 GHz)
- *RFA‑Series* – WLAN antennas (panel and omni‑directional, 2.4 GHz – 5.8 GHz, 5 – 14 dBi gain)
- Optical Modules:
- *SFP100‑Series* – Fast Ethernet SFP transceivers (100 Mbps, 2 – 120 km, 1310 / 1550 nm)
- *SFP1G‑Series* – Gigabit Ethernet SFP transceivers (1 Gbps, 550 m – 80 km, 850 / 1310 / 1550 nm)
- *SFP100B‑Series / SFP1GB‑Series* – BIDI SFP modules for single‑fiber communication

These accessories enable complete system integration for industrial networking, power delivery, and communication infrastructure.

---

### 6. Installation & Setup

Requirements:
- Compatible M12 male connector or cable assembly
- Soldering equipment suitable for fine‑pitch contacts
- Cable with appropriate conductor gauge (typically 24 – 20 AWG)
- Wire stripping and crimping tools

Installation Steps:
1. Prepare the Cable: Strip the outer jacket and individual conductors to the specified length.
2. Insert Cable Components: Slide the sealing nut and gland onto the cable before soldering.
3. Solder Termination: Solder each conductor to the corresponding solder cup on the connector insert, following the standard A‑coded pinout.
4. Assemble Connector: Insert the soldered contact assembly into the connector housing, ensuring correct alignment.
5. Tighten Sealing Nut: Secure the gland and nut to achieve strain relief and IP67 sealing.
6. Mate with Counterpart: Connect to an M12 male connector by aligning the keyway and tightening the threaded coupling to the recommended torque (typically 0.6 – 0.8 N·m).

Mounting Options:
- Inline cable connection
- Panel‑mount via bulkhead adapter (optional)
- Integration into junction boxes or control cabinets

Configuration:
No software configuration is required; the connector provides a passive electrical interface.

---

### 7. Performance & Capabilities

Electrical Performance:
- Rated current up to 4 A per contact ensures sufficient power delivery for sensors and actuators.
- Low contact resistance (< 10 mΩ) minimizes voltage drop and heat generation.
- High insulation resistance (> 100 MΩ) ensures signal integrity and safety.

Mechanical Performance:
- Threaded coupling provides vibration‑proof connection.
- Mating cycles: ≥ 100 cycles (typical for M12 connectors).
- Cable strain relief prevents conductor fatigue under mechanical stress.

Environmental Performance:
- IP67 sealing protects against dust and temporary immersion.
- Operating temperature range from −40 °C to +85 °C supports outdoor and industrial environments.
- Resistant to oils, coolants, and common industrial chemicals.

Limitations:
- Not suitable for high‑voltage (> 250 V) or high‑current (> 4 A) applications.
- Requires proper sealing and torque to maintain IP67 rating.
- Soldering termination demands skilled assembly for optimal reliability.

---

### 8. Standards & Compliance

The M12P‑5FA connector and its associated accessories conform to international standards for industrial connectivity and environmental protection.

Applicable Standards:
- IEC 61076‑2‑101: M12 circular connectors for industrial applications
- IEC 60529: Degrees of protection (IP Code) – IP67 rating
- IEC 60068‑2‑6 / 2‑27: Vibration and shock testing
- RoHS Directive (2011/65/EU): Restriction of hazardous substances
- REACH Regulation (EC 1907/2006): Compliance with chemical safety requirements
- UL 94 V‑0: Flammability rating for insulating materials (typical for thermoplastic inserts)

Industry Compatibility:
- PROFIBUS, CANopen, DeviceNet, and generic I/O systems
- Industrial Ethernet (100 Mbps / 1 Gbps) when used with appropriate cabling
- Automation and control equipment conforming to IEC 61158 and IEC 61784 communication profiles

---

### 9. Additional Information

Warranty:
ORing Industrial Networking typically provides a 2‑year limited warranty covering manufacturing defects and material failures under normal operating conditions.

Technical Support:
Comprehensive technical documentation, wiring diagrams, and pinout references are available through ORing’s official website (www.oring‑networking.com). Engineering support is provided for system integration, connector selection, and troubleshooting.

Maintenance:
- Periodically inspect connectors for contamination or mechanical wear.
- Clean contacts with isopropyl alcohol and lint‑free swabs if necessary.
- Ensure sealing surfaces and O‑rings remain intact to maintain IP67 protection.
- Replace connectors showing corrosion, deformation, or damaged threads.

Updates & Product Lifecycle:
The M12P‑5FA is part of ORing’s ongoing M‑Series product line, ensuring long‑term availability and backward compatibility with existing systems. Future revisions may include enhanced materials or extended temperature ratings while maintaining pinout and mechanical compatibility.

Environmental Considerations:
All materials are compliant with RoHS and REACH directives. Packaging is recyclable, and the product is designed for extended service life to minimize environmental impact.

---

### Summary

The M12P‑5FA 5‑Pin M12 Female Assembled Plug (Soldering Type, A‑Coding) is a robust, high‑reliability connector engineered for industrial automation and networking applications. It provides secure, vibration‑resistant connectivity with IP67 environmental protection, supporting both signal and low‑power transmission. Its soldering termination ensures durable electrical contact, while its compatibility with ORing’s extensive accessory ecosystem—including M‑Series cables, power supplies, RF components, and optical modules—makes it a versatile choice for integrated industrial systems.

Designed for rugged excellence, the M12P‑5FA exemplifies ORing’s commitment to delivering durable, standards‑compliant connectivity solutions for mission‑critical environments.