Comprehensive Product Summary: M12P‑8FA – 8‑Pin M12 Female Assembled Plug, Soldering Type (A‑Coding)

---

### 1. Product Overview

Product Name: M12P‑8FA
Model Number: M12P‑8FA
Series: M12 Circular Connector Series
Article Number: M12P‑8FA
Manufacturer: ORing Industrial Networking Corp.
Product Type: 8‑pin M12 Female Assembled Plug, Soldering Type, A‑Coding

The M12P‑8FA is a precision‑engineered industrial circular connector designed for robust signal and power transmission in harsh environments. It belongs to ORing’s M‑Series connectivity solutions, which are widely used in industrial automation, transportation, and rugged networking applications. The connector provides a reliable interface for field‑assembled connections, ensuring secure mating, environmental sealing, and long‑term durability under mechanical and environmental stress.

---

### 2. Key Features

- 8‑Pin Female Connector: Supports up to eight signal or low‑power contacts, suitable for data, sensor, or control wiring.
- A‑Coding Standard: Ensures compatibility with standard A‑coded M12 male connectors used for sensors, actuators, and fieldbus systems.
- Soldering Type Termination: Designed for manual soldering of conductors, allowing flexible cable assembly and field customization.
- Rugged Construction: Built to withstand vibration, shock, and mechanical stress typical in industrial and transportation environments.
- IP‑Rated Design (when mated): Provides environmental sealing against dust and moisture ingress, ensuring reliable operation in outdoor or factory settings.
- Compact Circular Form Factor: Standard M12 interface (12 mm thread) allows dense installation in control cabinets or field devices.
- High Contact Reliability: Gold‑plated contacts ensure low contact resistance and long‑term electrical stability.
- Temperature and Chemical Resistance: Suitable for wide operating temperature ranges and resistant to oils, lubricants, and industrial contaminants.
- Field Assembly Capability: Enables on‑site cable termination without specialized crimping tools, ideal for maintenance and system integration.
- Compliance with IEC 61076‑2‑101: Ensures interoperability with other M12 connectors conforming to the same international standard.

---

### 3. Technical Specifications

| Parameter | Specification |
|----------------|------------------|
| Connector Type | Female circular connector |
| Interface Standard | M12, A‑coded |
| Number of Contacts | 8 pins |
| Termination Method | Soldering type |
| Contact Material | Copper alloy with gold plating |
| Insulator Material | High‑temperature thermoplastic |
| Shell Material | Nickel‑plated brass or stainless steel (depending on variant) |
| Coupling Mechanism | Threaded coupling, M12 × 1.0 thread |
| Contact Resistance | ≤ 10 mΩ |
| Insulation Resistance | ≥ 100 MΩ at 100 VDC |
| Rated Voltage | Typically 30 V AC/DC (A‑coded signal type) |
| Rated Current | Up to 2 A per contact (depending on wire gauge) |
| Wire Gauge Range | 26 – 20 AWG (0.14 – 0.5 mm²) |
| Cable Diameter Range | 4 – 6 mm typical |
| Ingress Protection (mated) | IP67 or higher |
| Operating Temperature | −40 °C to +85 °C |
| Vibration Resistance | IEC 60068‑2‑6 compliant |
| Shock Resistance | IEC 60068‑2‑27 compliant |
| Flammability Rating | UL 94 V‑0 (housing material) |
| Dimensions (approx.) | Outer diameter 12 mm; length ~45 mm (varies by assembly) |
| Weight | Approx. 15 – 25 g depending on configuration |

---

### 4. Functionality

The M12P‑8FA connector serves as a field‑assembled interface for connecting sensors, actuators, control modules, and communication devices in industrial networks. The A‑coding defines the pin arrangement and keying, preventing mismating with other coding types (e.g., B, C, D, or X).

How It Works:
Each of the eight contacts is soldered to individual conductors of a multi‑core cable. Once soldered, the cable is inserted into the connector housing, and the strain relief and sealing components are tightened to ensure mechanical stability and environmental protection. When mated with a corresponding M12 male plug, the threaded coupling ensures a secure, vibration‑resistant connection.

Typical Use Cases:
- Industrial automation systems (PLC I/O connections)
- Sensor and actuator wiring in manufacturing lines
- Fieldbus and serial communication interfaces
- Process control instrumentation
- Transportation and railway electronics
- Outdoor networking and surveillance equipment

Compatibility:
The M12P‑8FA is compatible with all standard A‑coded M12 male connectors and cables, including ORing’s M12C‑series cables (e.g., M12C‑4M4F‑1000, M12C‑5M5F‑3000). It can also be integrated with DIN‑rail power supplies, SFP modules, and RF accessories within ORing’s industrial networking ecosystem.

---

### 5. Components & Accessories

Included Components:
- M12 female connector body (A‑coded)
- Contact insert with 8 solder cups
- Cable gland and sealing grommet
- Strain relief clamp
- Coupling nut (nickel‑plated brass)
- Assembly instructions

Optional Accessories and Related Products:
ORing provides a comprehensive range of accessories compatible with the M12P‑8FA connector, enabling complete system integration:

- Cables with M‑Series Connectors:
- *M12C‑4M4M‑300 / M12C‑4M4F‑1000 / M12C‑5M5F‑3000* – IP67‑rated Ethernet and signal cables with A‑ or D‑coding, available in lengths from 3 m to 30 m.
- *M12C‑4MRJ‑300* – M12 to RJ45 Ethernet cable for field device connectivity.

- Power Accessories:
- *DR‑Series DIN‑Rail Power Supplies* (e.g., DR‑4512, DR‑75‑24, SDR‑480‑48) – provide regulated DC power for connected devices.
- *PA‑Series Power Adapters* (e.g., PAA‑121000, PAE‑482500) – universal AC/DC adapters for laboratory or field use.

- RF and Antenna Components:
- *RFB‑M2‑150 / RFB‑M2‑1000* – magnetic RF antenna bases with N‑female to SMA‑male connectors.
- *RFC‑Series RF Cables* – low‑loss coaxial cables with SMA or N‑type connectors, available in 1.5 m to 10 m lengths.
- *RFP‑NF‑NM‑WAG* – high‑power RF surge protector (0–6 GHz).
- *RFA‑Series WLAN Antennas* – omni‑directional and panel‑type antennas for 2.4 GHz and 5.8 GHz applications.

- Optical Modules:
- *SFP100‑Series* (Fast Ethernet) and *SFP1G‑Series* (Gigabit Ethernet) optical transceivers for fiber connectivity.
- *BIDI‑SFP Modules* for single‑fiber bidirectional communication.

These accessories allow the M12P‑8FA to be integrated into complete industrial communication networks, combining wired, optical, and wireless components.

---

### 6. Installation & Setup

Requirements:
- Standard soldering tools and materials (soldering iron, flux, tin‑lead or lead‑free solder).
- Wire stripping tools suitable for 26–20 AWG conductors.
- Torque wrench for tightening the coupling nut to manufacturer‑specified torque (typically 0.6 – 1.0 Nm).

Installation Steps:
1. Strip the cable jacket and individual conductors to the recommended length.
2. Slide the gland nut, sealing ring, and strain relief components onto the cable.
3. Solder each conductor to the corresponding solder cup on the connector insert according to the pin assignment.
4. Inspect solder joints for proper wetting and absence of shorts.
5. Insert the contact assembly into the connector housing.
6. Tighten the gland nut to compress the sealing ring and ensure IP67 protection.
7. Verify continuity and insulation resistance before deployment.

Mounting Options:
- Inline cable connection (standard).
- Panel‑mount variant available in the same series for bulkhead installation.
- Compatible with M12 receptacles on industrial devices, sensors, and network switches.

Configuration:
No software configuration is required; the connector provides a passive electrical interface. Pin assignments follow the A‑coding standard, typically:
1 = +V, 2 = 0 V, 3 = Signal 1, 4 = Signal 2, 5 = Signal 3, 6 = Signal 4, 7 = Signal 5, 8 = Signal 6 (depending on application).

---

### 7. Performance & Capabilities

Electrical Performance:
- Rated current up to 2 A per contact ensures reliable power and signal transmission for sensors and control devices.
- Low contact resistance (< 10 mΩ) minimizes voltage drop and heat generation.
- High insulation resistance (> 100 MΩ) prevents leakage currents and cross‑talk.

Mechanical Performance:
- Threaded coupling provides vibration‑proof connection; suitable for mobile or high‑vibration environments.
- Mating cycles: ≥ 100 cycles without degradation of contact quality.
- Cable strain relief prevents conductor fatigue and breakage.

Environmental Performance:
- IP67 sealing (when mated) protects against dust ingress and temporary immersion in water.
- Operating temperature range −40 °C to +85 °C supports outdoor and industrial use.
- Resistant to oils, coolants, and cleaning agents commonly found in factory environments.

Limitations:
- Not suitable for high‑voltage or high‑current power transmission beyond rated values.
- Soldering type requires manual assembly; not intended for automated crimping or overmolding processes.
- Must be properly sealed to maintain IP rating; improper assembly may reduce protection level.

---

### 8. Standards & Compliance

- IEC 61076‑2‑101: Defines mechanical and electrical interface for M12 connectors.
- IEC 60512: Test methods for electrical connectors (contact resistance, vibration, shock, etc.).
- IEC 60068‑2‑6 / 2‑27: Environmental testing for vibration and shock resistance.
- IP67 (IEC 60529): Dust‑tight and protected against temporary immersion.
- UL 94 V‑0: Flammability rating for insulating materials.
- RoHS Directive 2011/65/EU: Restriction of hazardous substances compliance.
- REACH Regulation (EC) No 1907/2006: Material safety compliance.

These certifications ensure that the M12P‑8FA meets international safety, environmental, and performance standards required for industrial and transportation applications.

---

### 9. Additional Information

Warranty:
Typically covered by ORing’s standard limited warranty (1–3 years depending on region and product line), covering manufacturing defects under normal operating conditions.

Technical Support:
ORing provides comprehensive technical documentation, including pinout diagrams, assembly instructions, and compatibility charts. Support is available through the company’s website and authorized distributors.

Maintenance:
- Periodic inspection recommended for mechanical wear and corrosion.
- Clean contacts with isopropyl alcohol if contamination occurs.
- Ensure sealing components remain intact to maintain IP rating.
- Replace connector if mechanical damage or thread wear is observed.

Updates and Product Lifecycle:
The M12P‑8FA is part of ORing’s ongoing M‑Series product family, which continues to evolve with new coding types (B, D, X) and higher‑speed variants for Ethernet and fieldbus applications. Backward compatibility with existing A‑coded systems ensures long‑term availability and integration flexibility.

Manufacturer Website: [www.oring-networking.com](https://www.oring-networking.com)

---

### Summary

The M12P‑8FA 8‑Pin M12 Female Assembled Plug (A‑Coding, Soldering Type) is a high‑reliability industrial connector engineered for demanding environments. It combines robust mechanical design, secure threaded coupling, and flexible solder termination to deliver dependable connectivity for sensors, actuators, and control systems. With compliance to IEC and IP67 standards, it ensures long‑term performance in harsh conditions.

When integrated with ORing’s extensive range of accessories—such as M12 cables, DIN‑rail power supplies, RF components, and SFP modules—the M12P‑8FA forms part of a complete, ruggedized networking and automation infrastructure. Its modularity, field‑assembly capability, and adherence to global standards make it an ideal choice for system integrators, OEMs, and maintenance engineers seeking durable and interoperable connectivity solutions.