Comprehensive Product Summary – ADLINK PCI-6208V-GL

---

### 1. Product Overview

Product Name: PCI-6208V-GL
Model: PCI-6208V-GL
Series: 6208/6216-GL Series – Multi-Channel Analog Output Cards
Article Number: PCI-6208V-GL
Manufacturer: ADLINK Technology Inc.

The ADLINK PCI-6208V-GL is an 8-channel, 16-bit analog output card designed for high-performance data acquisition and control applications. It belongs to ADLINK’s 6208/6216-GL Series, which includes PCI, PCI Express, and CompactPCI variants. The PCI-6208V-GL provides ±10 V bipolar voltage outputs with high accuracy and fast settling time, making it suitable for industrial process control, signal generation, and automation systems. It is fully compatible with the earlier PCI-6208V model, ensuring seamless integration into existing systems.

---

### 2. Key Features

- Bus Interface: 32-bit 3.3 V or 5 V PCI bus, Plug and Play compliant.
- Analog Outputs: 8 independent voltage output channels, each with a dedicated 16-bit DAC.
- Resolution: 16-bit D/A conversion with 15-bit guaranteed monotonicity.
- Output Range: Bipolar ±10 V voltage output range.
- Output Drive Capability: ±5 mA maximum per channel.
- Settling Time: 130 µs typical for a 20 V step.
- Slew Rate: 25–26 V/µs typical.
- Gain Error: ±0.2% maximum.
- Differential Nonlinearity (DNL): ±1 LSB typical.
- Digital I/O: 4 TTL-compatible digital inputs and 4 TTL-compatible digital outputs.
- Operating Systems Supported: Windows 7/8 (x86/x64) and Linux.
- Software Support: Drivers and SDKs for LabVIEW™, MATLAB®, C/C++, Visual Basic, and Visual Studio.NET.
- Form Factor: Standard PCI card, 175 mm x 107 mm PCB dimensions.
- Connector: One 37-pin D-sub female connector for analog and digital I/O.
- Power Supply: +5 VDC at 650 mA typical, +12 VDC at 170 mA typical.
- Compatibility: 100% backward compatible with PCI-6208V.
- Additional Features: Onboard DC/DC converter, plug-and-play configuration, and robust calibration support.

---

### 3. Technical Specifications

Analog Voltage Output
- Channels: 8 voltage outputs
- Resolution: 16 bits
- Monotonicity: 15 bits typical
- Output Range: ±10 V
- Slew Rate: 26 V/µs typical
- Settling Time: 130 µs typical (20 V step)
- Gain Error: ±0.2% max
- DNL: ±1 LSB typical
- Output Drive: ±5 mA max
- Output Initial Status: 0 V after reset or power-on
- Data Transfer: Programmed I/O

Digital I/O
- Channels: 4 digital inputs, 4 digital outputs
- Logic Level: 5 V TTL compatible
- Input Voltage: Low ≤ 0.8 V, High ≥ 2.0 V
- Output Voltage: Low ≤ 0.4 V, High ≥ 2.4 V
- Drive Capability: Sink 8 mA, Source 0.4 mA

General Specifications
- I/O Connector: 37-pin D-sub female
- Operating Temperature: 0°C to +50°C
- Storage Temperature: -20°C to +80°C
- Humidity: 5%–95% non-condensing
- Power Requirements:
- +5 VDC @ 650 mA typical
- +12 VDC @ 170 mA typical
- Dimensions: 175 mm (L) × 107 mm (H) (6.82” × 4.17”)
- Weight: Approx. 200 g (typical board weight)
- PCB Type: Multi-layer, industrial-grade

---

### 4. Functionality

The PCI-6208V-GL performs digital-to-analog conversion (DAC) across eight independent channels, each capable of generating precise voltage signals within a ±10 V range. Each channel has its own DAC, allowing simultaneous or independent updates. The card communicates with the host system via the PCI bus, using programmed I/O for data transfer.

Typical Use Cases:
- Industrial process control and automation systems
- Servo motor control and motion simulation
- Signal generation and waveform output
- Reference voltage generation for test systems
- Automated test equipment (ATE) and SCADA systems

Compatibility:
- Fully compatible with PCI-6208V and PCI-6216V hardware and software.
- Supported by ADLINK’s DAQPilot, DAQMaster, and legacy PCIS-DASK drivers.
- Integrates with third-party environments such as MATLAB®, LabVIEW™, and Agilent VEE™.

---

### 5. Components & Accessories

Included Items:
- PCI-6208V-GL analog output card
- ADLINK All-in-One Software CD (drivers, SDKs, utilities)
- User’s Manual

Optional Accessories:
- DIN-37D-01: Terminal board with one 37-pin D-sub connector and DIN-rail mounting.
- ACLD-9137-01: General-purpose terminal board with one 37-pin D-sub male connector.
- ACLD-9137F-01: General-purpose terminal board with one 37-pin D-sub female connector.
- ACL-10137-1MM: 37-pin D-sub male/male cable, 1 meter.
- ACL-10137-1MF: 37-pin D-sub male/female cable, 1 meter.

These accessories facilitate easy connection between the PCI-6208V-GL and external devices or signal conditioning modules.

---

### 6. Installation & Setup

Requirements:
- Available 32-bit PCI slot with bus-mastering capability.
- Compatible PC system running Windows or Linux.
- Anti-static workstation and grounding strap for handling.

Installation Steps:
1. Power off the computer and disconnect all peripherals.
2. Open the chassis and locate an available PCI slot.
3. Insert the PCI-6208V-GL card firmly into the slot.
4. Secure the bracket with a screw.
5. Reassemble the chassis and power on the system.
6. Install ADLINK DAQPilot or legacy PCIS-DASK drivers from the All-in-One CD.
7. Use DAQMaster to verify device recognition and configure channels.

Configuration:
- Plug and Play (PnP) PCI configuration automatically assigns base addresses and interrupts.
- No manual jumper or switch settings are required.
- Device resources are managed by the system BIOS.

---

### 7. Performance & Capabilities

Analog Output Performance:
- High-resolution 16-bit DACs ensure precise voltage generation.
- ±10 V bipolar range supports a wide variety of control and simulation tasks.
- Typical slew rate of 26 V/µs allows rapid signal transitions.
- Settling time of 130 µs ensures stable output for dynamic applications.
- Output drive capability of ±5 mA supports direct connection to moderate loads.

Digital I/O Performance:
- Four TTL-compatible input and output channels for control signaling.
- Fast response suitable for triggering, status monitoring, or synchronization.

Efficiency & Limitations:
- Optimized for low power consumption (less than 1 W typical).
- Limited to ±5 mA output current per channel; external buffering recommended for higher loads.
- Programmed I/O data transfer mode; DMA not supported.

---

### 8. Standards & Compliance

- PCI Bus Compliance: 32-bit, 3.3 V/5 V signaling, PCI Local Bus Specification 3.0.
- CompactPCI Compliance (for cPCI variants): PICMG 2.0 R2.1.
- Environmental Standards: Designed for industrial operating conditions (0°C–50°C).
- Safety: CE and FCC compliant (typical for ADLINK industrial cards).
- Software Standards: Compatible with major development environments and APIs (LabVIEW™, MATLAB®, Visual Studio).
- Calibration: Factory-calibrated with precision DMM; recommended annual recalibration.

---

### 9. Additional Information

Warranty:
Standard ADLINK limited warranty (typically one year) covering manufacturing defects and hardware failures under normal use.

Support & Maintenance:
- Technical support available through ADLINK’s global offices and authorized distributors.
- Software updates, drivers, and documentation available at [www.adlinktech.com](http://www.adlinktech.com).
- Recommended recalibration interval: 12 months.
- Maintenance involves periodic inspection, cleaning, and recalibration to ensure accuracy.

Software & Utilities:
- DAQPilot: Modern driver and SDK with graphical configuration tools.
- DAQMaster: Device management and configuration utility.
- PCIS-DASK: Legacy driver for older Windows systems.
- Linux DASK/X: Open-source driver for Linux environments.
- Third-Party Integration: MATLAB® DAQ Toolbox Adapter, LabVIEW™ VI Set, Agilent VEE™ Interface, and ActiveX Controls.

Calibration Utility:
- DOS-based 6208UTIL.EXE for function testing and calibration.
- Provides channel verification, output testing, and calibration adjustment.
- Calibration data stored in onboard flash memory for persistent accuracy.

Physical & Environmental Considerations:
- Compact PCI form factor suitable for industrial PCs and test benches.
- Requires adequate ventilation and protection from static discharge.
- Operates reliably in environments with 5–95% relative humidity (non-condensing).

Manufacturer Contact Information:
ADLINK Technology Inc.
9F, No.166 Jian Yi Road, Chungho City, Taipei County 235, Taiwan
Tel: +886-2-8226-5877 | Fax: +886-2-8226-5717
Email: service@adlinktech.com
Regional offices available in the USA, Europe, Japan, China, Korea, Singapore, and India.

---

### Summary

The ADLINK PCI-6208V-GL is a robust, high-precision 8-channel analog output card engineered for industrial and laboratory applications requiring accurate voltage generation and control. With 16-bit resolution, ±10 V output range, and integrated digital I/O, it provides a versatile platform for automation, testing, and signal simulation. Its compatibility with multiple software environments and operating systems ensures flexibility for developers and system integrators. The card’s plug-and-play PCI interface, comprehensive software support, and optional terminal accessories make it a reliable choice for both new installations and legacy system upgrades.