LOOKING FOR THE RIGHT
INDUSTRIAL SOLUTION?
Discover embedded, communication and automation solutions tailored to your application.
POW-DD10
Power Supply 10..30VDC in 5VDC out
210,00 EUR
including VAT 249.90 EUR
- Wide Input Range: Accepts 10 to 30 V DC, suitable for 12 V and 24 V industrial power systems.
- Stable 5 V DC Output: Provides a regulated 5 V DC ± 5 % output with a maximum current of 3 A, ensuring stable operation of connected F&eIT modules.
- DIN‑Rail Mountable: Compact housing with integrated 35 mm DIN‑rail clip for quick installation in control panels or equipment racks.
- High Reliability: Designed for continuous industrial operation with low noise, high isolation, and robust protection against line disturbances.
- Compact Form Factor: 52.4 (W) × 64.7 (D) × 94.0 (H) mm, enabling dense installation alongside other F&eIT components.
- Lightweight Construction: Approximately 150 g, minimizing mechanical load on DIN rails.
- Optimized for F&eIT Systems: Provides the standard 5 V DC bus voltage required by CONTEC’s modular controllers and device modules.
- Industrial‑Grade Environmental Tolerance: Operates from 0 to 50 °C and 10 to 90 % RH (non‑condensing).
- Noise Immunity: Meets IEC 1000‑4‑4 Level 3 / EN 61000‑4‑4 Level 3 standards (AC line 2 kV, signal line 1 kV).
- Safety Grounding: D‑type (former Class 3) ground terminal for stable reference and noise suppression.
- Stable 5 V DC Output: Provides a regulated 5 V DC ± 5 % output with a maximum current of 3 A, ensuring stable operation of connected F&eIT modules.
- DIN‑Rail Mountable: Compact housing with integrated 35 mm DIN‑rail clip for quick installation in control panels or equipment racks.
- High Reliability: Designed for continuous industrial operation with low noise, high isolation, and robust protection against line disturbances.
- Compact Form Factor: 52.4 (W) × 64.7 (D) × 94.0 (H) mm, enabling dense installation alongside other F&eIT components.
- Lightweight Construction: Approximately 150 g, minimizing mechanical load on DIN rails.
- Optimized for F&eIT Systems: Provides the standard 5 V DC bus voltage required by CONTEC’s modular controllers and device modules.
- Industrial‑Grade Environmental Tolerance: Operates from 0 to 50 °C and 10 to 90 % RH (non‑condensing).
- Noise Immunity: Meets IEC 1000‑4‑4 Level 3 / EN 61000‑4‑4 Level 3 standards (AC line 2 kV, signal line 1 kV).
- Safety Grounding: D‑type (former Class 3) ground terminal for stable reference and noise suppression.
1. Product Overview
Product Name: Power Supply 10–30 V DC in / 5 V DC out
Model: POW‑DD10
Series: F&eIT Power Supply Series
Article Number: POW‑DD10GY
Manufacturer: CONTEC Co., Ltd. (Japan)
The CONTEC POW‑DD10 is a compact, high‑efficiency DC‑DC power supply designed specifically for the F&eIT (Factory & Enterprise IT) distributed monitoring and control network. It converts a wide‑range 10 to 30 V DC input into a regulated 5 V DC output at up to 3 A. The unit is optimized for powering CONTEC’s DIN‑rail‑mounted microcontrollers, I/O controllers, assist servers, monitoring servers, and device modules used in industrial automation and embedded control systems.
2. Key Features
- Wide Input Range: Accepts 10 to 30 V DC, suitable for 12 V and 24 V industrial power systems.
- Stable 5 V DC Output: Provides a regulated 5 V DC ± 5 % output with a maximum current of 3 A, ensuring stable operation of connected F&eIT modules.
- DIN‑Rail Mountable: Compact housing with integrated 35 mm DIN‑rail clip for quick installation in control panels or equipment racks.
- High Reliability: Designed for continuous industrial operation with low noise, high isolation, and robust protection against line disturbances.
- Compact Form Factor: 52.4 (W) × 64.7 (D) × 94.0 (H) mm, enabling dense installation alongside other F&eIT components.
- Lightweight Construction: Approximately 150 g, minimizing mechanical load on DIN rails.
- Optimized for F&eIT Systems: Provides the standard 5 V DC bus voltage required by CONTEC’s modular controllers and device modules.
- Industrial‑Grade Environmental Tolerance: Operates from 0 to 50 °C and 10 to 90 % RH (non‑condensing).
- Noise Immunity: Meets IEC 1000‑4‑4 Level 3 / EN 61000‑4‑4 Level 3 standards (AC line 2 kV, signal line 1 kV).
- Safety Grounding: D‑type (former Class 3) ground terminal for stable reference and noise suppression.
3. Technical Specifications
| Parameter | Specification |
|----------------|------------------|
| Model | POW‑DD10GY |
| Input Voltage Range | 10 to 30 V DC |
| Output Voltage | 5 V DC ± 5 % |
| Maximum Output Current | 3.0 A |
| Rated Output Power | 15 W (max.) |
| Efficiency | Typically > 80 % (at 24 V input, full load) |
| Ripple & Noise | ≤ 50 mVp‑p (typical) |
| Load Regulation | ± 1 % (max.) |
| Line Regulation | ± 0.5 % (max.) |
| Operating Temperature | 0 to 50 °C |
| Storage Temperature | −10 to 60 °C |
| Operating Humidity | 10 to 90 % RH (non‑condensing) |
| Cooling Method | Natural convection (fanless) |
| Dimensions | 52.4 (W) × 64.7 (D) × 94.0 (H) mm (excluding protrusions) |
| Weight | 150 g (main unit only) |
| Mounting | 35 mm DIN rail |
| Ground Type | D‑type (former Class 3) |
| Noise Resistance | AC line 2 kV / signal line 1 kV (IEC 1000‑4‑4 Level 3) |
| Case Material | Industrial‑grade resin enclosure |
| Color | Gray (GY) |
| Certifications | CE marking / FCC Class A compliance |
| Warranty | 1 year from date of purchase |
4. Functionality
The POW‑DD10 functions as a regulated DC‑DC converter that supplies 5 V DC power to F&eIT system components. It receives a DC input from a 12 V or 24 V industrial source and delivers a stable 5 V output through its front‑mounted two‑piece removable connector. The output is distributed via the F&eIT bus or directly to connected modules such as:
- Micro Controllers (CPU‑SB10/20/21 series)
- I/O Controllers (CPU‑CA10/20 series)
- I/O Assist Servers (SVR‑IOA/IOA2 series)
- Monitoring & Control Servers (SVR‑MMF series)
- Security Servers (SVR‑SEC series)
- Media Converters and Network Devices
The unit ensures that the total current supplied to stacked device modules does not exceed 3 A, the maximum permissible current of the F&eIT stack connector. It is ideal for powering distributed I/O systems, embedded controllers, and Ethernet‑based automation nodes in factory or building automation networks.
5. Components & Accessories
Included Items
- POW‑DD10 main unit
- 2‑piece removable power input/output connector
- DIN‑rail mounting clip (integrated)
- User documentation
Optional Accessories
- FAN‑FIT (5 V DC cooling fan): increases allowable ambient temperature to 60 °C.
- POA‑AD22 AC adapter (90 – 264 V AC input, 5 V DC 2 A output) – for bench or non‑DC environments.
- POW‑DD43GY DC‑DC power supply (30 – 50 V DC input, 5 V 3 A output) – for higher‑voltage systems.
- POW‑AD13GY / AD22GY / AD25GY AC‑DC models – for direct AC mains applications.
Connectors
- Front‑mounted removable terminal block for DC input/output.
- FG (Functional Ground) terminal provided for chassis grounding.
6. Installation & Setup
- Mounting: Attach directly to a standard 35 mm DIN rail using the built‑in spring clip. Installation and removal can be performed with a flat‑head screwdriver.
- Orientation: Vertical mounting recommended for optimal convection cooling.
- Wiring:
- Input: 10 – 30 V DC from regulated source.
- Output: 5 V DC to F&eIT bus or connected modules.
- Ground: Connect FG terminal to protective earth for noise suppression.
- Configuration: No software setup required; the unit operates as a fixed‑output converter.
- Precautions:
- Ensure total load current ≤ 3 A.
- Avoid excessive dust, corrosive gas, or vibration.
- Maintain ambient temperature ≤ 50 °C (60 °C with FAN‑FIT).
7. Performance & Capabilities
- Output Capacity: 3 A continuous at 5 V DC (15 W max).
- Efficiency: Typically 80 % or higher at 24 V input and full load.
- Voltage Regulation: Maintains ± 5 % stability across input and load variations.
- Ripple Noise: ≤ 50 mVp‑p (typical).
- Transient Response: Recovers to within ± 1 % of nominal output within 2 ms for 50 % load change.
- Protection Features: Over‑current and short‑circuit protection with automatic recovery.
- Thermal Design: Fanless natural convection cooling for silent operation and high reliability.
- Environmental Endurance: Operates reliably in industrial environments with line noise up to 2 kV and signal noise up to 1 kV.
- Limitations: Not intended for direct AC mains input; requires a DC source within 10 – 30 V range.
8. Standards & Compliance
- Electrical Safety: Designed to meet CE requirements for low‑voltage and EMC directives.
- EMC Compliance: IEC 1000‑4‑4 Level 3 / EN 61000‑4‑4 Level 3 (EFT/Burst immunity).
- FCC Compliance: Class A for industrial environments.
- Grounding Standard: D‑type (former Class 3) industrial ground.
- RoHS Compliance: Lead‑free construction in accordance with CONTEC’s environmental policy.
- Quality Assurance: Manufactured under ISO 9001‑certified processes.
9. Additional Information
- Warranty: 1‑year limited warranty covering defects in materials and workmanship.
- Support & Maintenance: Technical support available through CONTEC offices in Japan, U.S.A., Europe, Korea, China, and Taiwan. Firmware and documentation updates are available at [www.contec.com](http://www.contec.com).
- Maintenance Guidelines: Periodic inspection of terminal tightness and ventilation recommended. No user‑serviceable internal parts.
- Service Life: Designed for long‑term continuous operation in industrial control panels.
- Replacement & Compatibility: Fully compatible with other F&eIT power supplies (POW‑DD43GY, POW‑AD22GY, etc.) and supports all F&eIT controllers and modules requiring 5 V DC input.
- Environmental Conditions: Avoid exposure to corrosive gas or excessive dust; install in a dry, ventilated enclosure.
- Safety Notice: Disconnect input power before wiring or maintenance. Ensure proper polarity to prevent damage to connected modules.
Summary
The CONTEC POW‑DD10 DC‑DC Power Supply is a purpose‑built 5 V 3 A converter engineered for the F&eIT Series of distributed industrial automation devices. Its wide 10 – 30 V DC input range, compact DIN‑rail form factor, and robust electrical design make it ideal for powering Ethernet‑based microcontrollers, I/O controllers, and monitoring servers in harsh industrial environments. With CE and FCC Class A compliance, high noise immunity, and reliable fanless operation, the POW‑DD10 provides a stable and efficient power foundation for modern distributed control networks.
Product Name: Power Supply 10–30 V DC in / 5 V DC out
Model: POW‑DD10
Series: F&eIT Power Supply Series
Article Number: POW‑DD10GY
Manufacturer: CONTEC Co., Ltd. (Japan)
The CONTEC POW‑DD10 is a compact, high‑efficiency DC‑DC power supply designed specifically for the F&eIT (Factory & Enterprise IT) distributed monitoring and control network. It converts a wide‑range 10 to 30 V DC input into a regulated 5 V DC output at up to 3 A. The unit is optimized for powering CONTEC’s DIN‑rail‑mounted microcontrollers, I/O controllers, assist servers, monitoring servers, and device modules used in industrial automation and embedded control systems.
2. Key Features
- Wide Input Range: Accepts 10 to 30 V DC, suitable for 12 V and 24 V industrial power systems.
- Stable 5 V DC Output: Provides a regulated 5 V DC ± 5 % output with a maximum current of 3 A, ensuring stable operation of connected F&eIT modules.
- DIN‑Rail Mountable: Compact housing with integrated 35 mm DIN‑rail clip for quick installation in control panels or equipment racks.
- High Reliability: Designed for continuous industrial operation with low noise, high isolation, and robust protection against line disturbances.
- Compact Form Factor: 52.4 (W) × 64.7 (D) × 94.0 (H) mm, enabling dense installation alongside other F&eIT components.
- Lightweight Construction: Approximately 150 g, minimizing mechanical load on DIN rails.
- Optimized for F&eIT Systems: Provides the standard 5 V DC bus voltage required by CONTEC’s modular controllers and device modules.
- Industrial‑Grade Environmental Tolerance: Operates from 0 to 50 °C and 10 to 90 % RH (non‑condensing).
- Noise Immunity: Meets IEC 1000‑4‑4 Level 3 / EN 61000‑4‑4 Level 3 standards (AC line 2 kV, signal line 1 kV).
- Safety Grounding: D‑type (former Class 3) ground terminal for stable reference and noise suppression.
3. Technical Specifications
| Parameter | Specification |
|----------------|------------------|
| Model | POW‑DD10GY |
| Input Voltage Range | 10 to 30 V DC |
| Output Voltage | 5 V DC ± 5 % |
| Maximum Output Current | 3.0 A |
| Rated Output Power | 15 W (max.) |
| Efficiency | Typically > 80 % (at 24 V input, full load) |
| Ripple & Noise | ≤ 50 mVp‑p (typical) |
| Load Regulation | ± 1 % (max.) |
| Line Regulation | ± 0.5 % (max.) |
| Operating Temperature | 0 to 50 °C |
| Storage Temperature | −10 to 60 °C |
| Operating Humidity | 10 to 90 % RH (non‑condensing) |
| Cooling Method | Natural convection (fanless) |
| Dimensions | 52.4 (W) × 64.7 (D) × 94.0 (H) mm (excluding protrusions) |
| Weight | 150 g (main unit only) |
| Mounting | 35 mm DIN rail |
| Ground Type | D‑type (former Class 3) |
| Noise Resistance | AC line 2 kV / signal line 1 kV (IEC 1000‑4‑4 Level 3) |
| Case Material | Industrial‑grade resin enclosure |
| Color | Gray (GY) |
| Certifications | CE marking / FCC Class A compliance |
| Warranty | 1 year from date of purchase |
4. Functionality
The POW‑DD10 functions as a regulated DC‑DC converter that supplies 5 V DC power to F&eIT system components. It receives a DC input from a 12 V or 24 V industrial source and delivers a stable 5 V output through its front‑mounted two‑piece removable connector. The output is distributed via the F&eIT bus or directly to connected modules such as:
- Micro Controllers (CPU‑SB10/20/21 series)
- I/O Controllers (CPU‑CA10/20 series)
- I/O Assist Servers (SVR‑IOA/IOA2 series)
- Monitoring & Control Servers (SVR‑MMF series)
- Security Servers (SVR‑SEC series)
- Media Converters and Network Devices
The unit ensures that the total current supplied to stacked device modules does not exceed 3 A, the maximum permissible current of the F&eIT stack connector. It is ideal for powering distributed I/O systems, embedded controllers, and Ethernet‑based automation nodes in factory or building automation networks.
5. Components & Accessories
Included Items
- POW‑DD10 main unit
- 2‑piece removable power input/output connector
- DIN‑rail mounting clip (integrated)
- User documentation
Optional Accessories
- FAN‑FIT (5 V DC cooling fan): increases allowable ambient temperature to 60 °C.
- POA‑AD22 AC adapter (90 – 264 V AC input, 5 V DC 2 A output) – for bench or non‑DC environments.
- POW‑DD43GY DC‑DC power supply (30 – 50 V DC input, 5 V 3 A output) – for higher‑voltage systems.
- POW‑AD13GY / AD22GY / AD25GY AC‑DC models – for direct AC mains applications.
Connectors
- Front‑mounted removable terminal block for DC input/output.
- FG (Functional Ground) terminal provided for chassis grounding.
6. Installation & Setup
- Mounting: Attach directly to a standard 35 mm DIN rail using the built‑in spring clip. Installation and removal can be performed with a flat‑head screwdriver.
- Orientation: Vertical mounting recommended for optimal convection cooling.
- Wiring:
- Input: 10 – 30 V DC from regulated source.
- Output: 5 V DC to F&eIT bus or connected modules.
- Ground: Connect FG terminal to protective earth for noise suppression.
- Configuration: No software setup required; the unit operates as a fixed‑output converter.
- Precautions:
- Ensure total load current ≤ 3 A.
- Avoid excessive dust, corrosive gas, or vibration.
- Maintain ambient temperature ≤ 50 °C (60 °C with FAN‑FIT).
7. Performance & Capabilities
- Output Capacity: 3 A continuous at 5 V DC (15 W max).
- Efficiency: Typically 80 % or higher at 24 V input and full load.
- Voltage Regulation: Maintains ± 5 % stability across input and load variations.
- Ripple Noise: ≤ 50 mVp‑p (typical).
- Transient Response: Recovers to within ± 1 % of nominal output within 2 ms for 50 % load change.
- Protection Features: Over‑current and short‑circuit protection with automatic recovery.
- Thermal Design: Fanless natural convection cooling for silent operation and high reliability.
- Environmental Endurance: Operates reliably in industrial environments with line noise up to 2 kV and signal noise up to 1 kV.
- Limitations: Not intended for direct AC mains input; requires a DC source within 10 – 30 V range.
8. Standards & Compliance
- Electrical Safety: Designed to meet CE requirements for low‑voltage and EMC directives.
- EMC Compliance: IEC 1000‑4‑4 Level 3 / EN 61000‑4‑4 Level 3 (EFT/Burst immunity).
- FCC Compliance: Class A for industrial environments.
- Grounding Standard: D‑type (former Class 3) industrial ground.
- RoHS Compliance: Lead‑free construction in accordance with CONTEC’s environmental policy.
- Quality Assurance: Manufactured under ISO 9001‑certified processes.
9. Additional Information
- Warranty: 1‑year limited warranty covering defects in materials and workmanship.
- Support & Maintenance: Technical support available through CONTEC offices in Japan, U.S.A., Europe, Korea, China, and Taiwan. Firmware and documentation updates are available at [www.contec.com](http://www.contec.com).
- Maintenance Guidelines: Periodic inspection of terminal tightness and ventilation recommended. No user‑serviceable internal parts.
- Service Life: Designed for long‑term continuous operation in industrial control panels.
- Replacement & Compatibility: Fully compatible with other F&eIT power supplies (POW‑DD43GY, POW‑AD22GY, etc.) and supports all F&eIT controllers and modules requiring 5 V DC input.
- Environmental Conditions: Avoid exposure to corrosive gas or excessive dust; install in a dry, ventilated enclosure.
- Safety Notice: Disconnect input power before wiring or maintenance. Ensure proper polarity to prevent damage to connected modules.
Summary
The CONTEC POW‑DD10 DC‑DC Power Supply is a purpose‑built 5 V 3 A converter engineered for the F&eIT Series of distributed industrial automation devices. Its wide 10 – 30 V DC input range, compact DIN‑rail form factor, and robust electrical design make it ideal for powering Ethernet‑based microcontrollers, I/O controllers, and monitoring servers in harsh industrial environments. With CE and FCC Class A compliance, high noise immunity, and reliable fanless operation, the POW‑DD10 provides a stable and efficient power foundation for modern distributed control networks.
No accessories available.