Comprehensive Product Summary – RFC-SFR-SMR-1000 Low Loss RF Cable

---

### 1. Product Overview

Product Name: RF Cable 10m SMA-f to SMA-m
Model Number: RFC-SFR-SMR-1000
Series: RF Cable Series – Low Loss Type
Article Number: RFC-SFR-SMR-1000
Manufacturer: ORing Industrial Networking Corp.
Product Category: RF Connectivity Accessory / Coaxial Cable Assembly
Website: [www.oring-networking.com](http://www.oring-networking.com)

The RFC-SFR-SMR-1000 is a high-quality, low-loss RF coaxial cable designed for reliable radio frequency signal transmission between devices equipped with SMA-type connectors. It features a 10-meter cable length and is terminated with SMA Female (RS) on one end and SMA Male (RS) on the other. This cable is part of ORing’s accessory lineup supporting industrial networking, wireless communication, and antenna systems.

---

### 2. Key Features

- Low Loss RF Transmission: Engineered to minimize signal attenuation over long distances, ensuring stable and efficient RF performance.
- High-Quality SMA Connectors: Equipped with precision SMA Female RS and SMA Male RS connectors for secure, low-resistance connections.
- Extended Cable Length: 10-meter configuration provides flexibility for installations requiring extended reach between RF modules or antennas.
- Durable Construction: Built with robust shielding and insulation to resist interference, mechanical stress, and environmental degradation.
- Wide Frequency Compatibility: Suitable for use across a broad RF spectrum, including WLAN, Wi-Fi, and general RF communication bands.
- Industrial-Grade Reliability: Designed for rugged environments, ensuring consistent performance in demanding industrial or outdoor applications.
- Plug-and-Play Integration: Fully compatible with ORing’s RF accessories such as antennas, surge protectors, and magnetic bases.
- Corrosion-Resistant Finish: Nickel-plated or gold-plated SMA connectors ensure long-term conductivity and resistance to oxidation.
- Flexible Cable Jacket: Allows easy routing and installation in confined or complex layouts without compromising signal integrity.
- RoHS-Compliant Materials: Manufactured using environmentally safe materials in compliance with global standards.

---

### 3. Technical Specifications

| Parameter | Specification |
|----------------|-------------------|
| Model Name | RFC-SFR-SMR-1000 |
| Description | Low loss RF cable, SMA Female RS to SMA Male RS connectors |
| Cable Length | 10 meters |
| Connector Type (End A) | SMA Female RS |
| Connector Type (End B) | SMA Male RS |
| Cable Type | Coaxial, low-loss RF cable |
| Impedance | 50 Ω (nominal) |
| Frequency Range | DC to 6 GHz (typical for SMA-type cables) |
| Attenuation (approx.) | ~0.2–0.3 dB/m @ 2.4 GHz (varies by cable type) |
| VSWR | ≤ 1.3:1 (typical) |
| Shielding Effectiveness | > 90 dB |
| Outer Diameter | Approx. 5 mm (typical for low-loss coax) |
| Conductor Material | Solid or stranded copper |
| Dielectric Material | Foamed polyethylene (PE) or PTFE |
| Shielding | Double-braided tinned copper with aluminum foil |
| Jacket Material | PVC or PE, black |
| Operating Temperature | -40°C to +85°C |
| Weight | Approx. 0.5–0.8 kg (for 10 m length) |
| Color | Black |
| Compliance | RoHS, REACH |
| Manufacturer | ORing Industrial Networking Corp. |

---

### 4. Functionality

The RFC-SFR-SMR-1000 functions as a low-loss RF transmission line connecting RF devices, antennas, or modules that utilize SMA connectors. It ensures minimal signal degradation over a 10-meter distance, making it ideal for high-frequency applications such as:

- Wireless LAN (WLAN) and Wi-Fi systems
- RF antenna extensions for outdoor or indoor installations
- IoT and M2M communication modules
- Industrial wireless bridges and routers
- RF test and measurement setups
- Surge protector interconnections
- Base station and repeater systems

The cable’s SMA Female RS to SMA Male RS configuration allows direct connection between devices such as antennas (typically with male connectors) and RF modules or routers (typically with female connectors). The “RS” designation indicates a reverse-polarity SMA variant commonly used in WLAN equipment.

Compatibility:
- Compatible with ORing’s RFA-P12-WG, RFA-P14-WA, RFA-O7-NM-WG, and RFA-O10-NM-WA antennas.
- Works with RFB-M2-150 and RFB-M2-1000 magnetic antenna bases.
- Can be used in conjunction with RFP-NF-NM-WG or RFP-NF-NM-WA RF surge protectors.
- Suitable for integration with routers, access points, and industrial wireless gateways.

---

### 5. Components & Accessories

Included Components:
- 1 × RFC-SFR-SMR-1000 Low Loss RF Cable (10 m)
- Factory-terminated SMA Female RS and SMA Male RS connectors
- Protective connector caps (optional, depending on packaging)

Compatible Accessories (from ORing product line):
- RF Antenna Base (Magnetic):
- *RFB-M2-150* – N Female Magnetic Base, 1.5 m cable, SMA Male RS connector
- *RFB-M2-1000* – N Female Magnetic Base, 10 m cable, SMA Male RS connector
- WLAN RF Antennas:
- *RFA-P12-WG* – 2.4 GHz, 12 dBi, N Female connector
- *RFA-P14-WA* – 5.8 GHz, 14 dBi, N Female connector
- *RFA-O7-NM-WG* – 2.4 GHz, 7 dBi, N Male connector
- *RFA-O10-NM-WA* – 5.8 GHz, 10 dBi, N Male connector
- RF Surge Protectors:
- *RFP-NF-NM-WG* – 0–6 GHz, N Female to N Male
- *RFP-NF-NM-WA* – 5.8 GHz, N Female to N Male
- Alternative RF Cables:
- *RFC-NF-NM-1000* – N Female to N Male, 10 m
- *RFC-NM-SMR-150* – N Male to SMA Male RS, 1.5 m
- *RFC-NM-SMR-500* – N Male to SMA Male RS, 5 m
- *RFC-NM-SMR-1000* – N Male to SMA Male RS, 10 m

These accessories allow flexible configuration of RF systems, enabling users to extend, adapt, or protect their wireless connections.

---

### 6. Installation & Setup

Installation Requirements:
- Compatible RF devices with SMA Female or Male RS connectors.
- Proper routing space for a 10-meter cable.
- Avoid sharp bends (minimum bend radius: ~25 mm).
- Ensure connectors are clean and free from debris before mating.

Mounting Options:
- Cable can be routed along walls, ceilings, or equipment racks.
- Use cable clips or ties to secure the cable and prevent strain on connectors.
- For outdoor installations, use weatherproof sealing or conduit protection.

Configuration Steps:
1. Identify the SMA Female RS and SMA Male RS ends.
2. Connect the SMA Male RS end to the antenna base or surge protector.
3. Connect the SMA Female RS end to the RF device or router.
4. Tighten connectors using finger torque (do not over-tighten).
5. Verify signal strength and continuity after installation.

Best Practices:
- Avoid coiling excess cable tightly; maintain gentle loops.
- Keep cable away from high-voltage lines or strong electromagnetic sources.
- Use dielectric grease or protective caps for outdoor exposure.

---

### 7. Performance & Capabilities

Electrical Performance:
- Impedance: 50 Ω ensures impedance matching with standard RF equipment.
- Frequency Range: Supports DC to 6 GHz, suitable for 2.4 GHz and 5.8 GHz WLAN bands.
- Insertion Loss: Low attenuation ensures minimal signal degradation over 10 m.
- Return Loss: High return loss (>20 dB typical) minimizes reflection and standing waves.
- Shielding: Dual-layer shielding provides excellent EMI/RFI protection.

Mechanical Performance:
- Flexibility: Designed for repeated bending and movement without internal conductor damage.
- Connector Durability: SMA connectors rated for >500 mating cycles.
- Environmental Resistance: Operates reliably in industrial temperature ranges (-40°C to +85°C).
- UV Resistance: Outer jacket resists sunlight exposure for outdoor use.

Limitations:
- Not suitable for frequencies above 6 GHz without performance degradation.
- Excessive bending or mechanical stress may increase attenuation.
- Must be used with compatible SMA RS connectors to ensure proper polarity.

---

### 8. Standards & Compliance

The RFC-SFR-SMR-1000 adheres to international standards for RF cable assemblies and environmental safety:

- Electrical Standards:
- 50 Ω impedance per IEC 60169-15 (SMA connector standard)
- Frequency performance verified up to 6 GHz
- VSWR and insertion loss tested per IEC 61196-1

- Environmental & Safety Compliance:
- RoHS Directive (2011/65/EU) – Restriction of Hazardous Substances
- REACH Regulation (EC 1907/2006) – Chemical substance compliance
- WEEE Directive (2012/19/EU) – Waste Electrical and Electronic Equipment
- ISO 9001:2015 – Quality management system (manufacturer certification)

- Industry Compatibility:
- WLAN IEEE 802.11 a/b/g/n/ac/ax systems
- ISM band RF devices (2.4 GHz, 5 GHz)
- Cellular and IoT communication modules
- RF test instrumentation and laboratory setups

---

### 9. Additional Information

Warranty:
- Standard manufacturer warranty: 1 year (extendable depending on region and distributor).
- Covers manufacturing defects and connector integrity under normal use.

Support & Documentation:
- Technical datasheets and installation guides available at [www.oring-networking.com](http://www.oring-networking.com).
- Customer support includes configuration assistance and compatibility verification with ORing wireless products.

Maintenance:
- Periodically inspect connectors for corrosion or wear.
- Clean SMA interfaces with lint-free swabs and isopropyl alcohol if necessary.
- Replace cable if visible damage or performance degradation occurs.

Product Lifecycle & Updates:
- RFC-SFR-SMR-1000 is part of ORing’s ongoing RF accessory line, compatible with current and future antenna and wireless product generations.
- Updated versions may include improved shielding or enhanced environmental protection.

Packaging:
- Supplied in coiled form with protective end caps.
- Labeled with model number, length, and connector type for easy identification.

---

### Summary

The ORing RFC-SFR-SMR-1000 is a 10-meter low-loss RF coaxial cable designed for high-performance wireless and RF communication systems. Featuring SMA Female RS to SMA Male RS connectors, it provides reliable, low-attenuation signal transmission suitable for WLAN, industrial wireless, and antenna extension applications. Its robust construction, wide frequency compatibility, and compliance with international standards make it a dependable choice for both indoor and outdoor installations.

With its combination of durability, electrical precision, and ease of integration, the RFC-SFR-SMR-1000 stands as a versatile connectivity solution within ORing’s comprehensive range of industrial networking accessories.