Comprehensive Product Summary – ORing RPM-130-AC-EU Industrial Power Supply (Approx. 3000 tokens)

---

### 1. Product Overview

Product Name: RPM-130-AC-EU
Model: RPM-130-AC-EU
Series: RPM-130 Series
Article Number: RPM-130-AC-EU
Manufacturer: ORing Industrial Networking Corp.
Version: 1.0
Product Type: 130W Rack-Mount 12VDC Power Supply Module (EU Type)
Product Category: Industrial Chassis Power Supply

The ORing RPM-130-AC-EU is a high-performance, rack-mountable industrial-grade power supply designed to deliver a stable 12VDC output at up to 10.8A. It supports a universal AC input range of 100–240VAC, making it suitable for global deployment in industrial automation, networking, and control systems. The unit is engineered for reliability, safety, and efficiency, incorporating multiple protection mechanisms and compliance with international standards.

---

### 2. Key Features

- Universal AC Input: Supports a wide input voltage range from 100 to 240VAC, 47–63Hz, enabling global compatibility.
- High Power Output: Provides a single 12VDC output rated at 130W maximum power (10.8A).
- High Efficiency: Typical conversion efficiency of 80%, reducing energy loss and heat generation.
- Comprehensive Protection:
- Over-voltage protection (OVP) at +14.5V / -2.5V thresholds.
- Over-current protection (OCP) between 10.8A and 21.6A.
- Over-temperature protection (OTP) at 130°C (typical).
- Continuous short-circuit protection.
- Active Power Factor Correction (PFC): Compliant with EN61000-3-2 Class A and D, ensuring reduced harmonic distortion and improved power quality.
- High Reliability: Mean Time Between Failures (MTBF) greater than 400,000 hours (MIL-HDBK-217F2, GB, GC, 25°C).
- Robust Mechanical Design: Rack-mountable chassis suitable for industrial environments.
- Environmental Resilience: Wide operating temperature range (-10°C to 70°C) and humidity tolerance (0–95% non-condensing).
- Regulatory Compliance: Meets international EMI/EMS and safety standards including UL60950-1, EN60950-1, and FCC Part 15 Class A.
- Cooling System: Integrated cooling fan for stable thermal performance under continuous load.
- EU Type Configuration: Supplied with EU-standard power cord and connectors.

---

### 3. Technical Specifications

Electrical Characteristics
- Input Voltage Range: 100–240VAC (universal input)
- Input Frequency: 47–63Hz
- Steady-State Current: 3.3 Arms maximum
- Inrush Current (Cold Start at 25°C): 80A maximum
- Leakage Current (DC-DC excluded): 3.5mA maximum

Output Characteristics
- Output Voltage: 12VDC nominal
- Maximum Output Current: 10.8A
- Maximum Output Power: 130W
- Ripple & Noise: 120mV peak-to-peak
- Line Regulation: ±1%
- Load Regulation: ±1%
- Hold-Up Time: 20ms typical
- Efficiency: 80% typical
- Temperature Coefficient: ±0.02% per °C typical

Protection Parameters
- Over-Voltage Protection: +14.5V / -2.5V
- Over-Current Protection: 10.8A to 21.6A
- Over-Temperature Protection: 130°C typical
- Short-Circuit Protection: Continuous, auto-recovery
- No-Load Operation: Supported

Environmental Conditions
- Operating Temperature: -10°C to +70°C (14°F to 158°F)
- Storage Temperature: -40°C to +85°C (-40°F to 185°F)
- Operating Humidity: 0%–95% RH, non-condensing
- Cooling Method: Forced air via integrated fan
- Airflow Direction: Front-to-rear (rack-mount orientation dependent)

Mechanical & Physical
- Form Factor: Rack-mount module
- Construction: Industrial-grade metal chassis
- Weight: (Not specified; typical for 130W rack module ~1.0–1.5 kg)
- Dimensions: (Not specified; standard 1U rack-mount footprint assumed)
- Mounting Type: Rack-mountable with front panel access

Vibration & Shock Resistance
- Operating Vibration: 1Grms, 5–500Hz, random vibration, 30 minutes along X, Y, Z axes
- Non-Operating Vibration: 2Grms, 5–500Hz, random vibration, 30 minutes along X, Y, Z axes
- Operating Shock: 10G maximum, ½ sine wave, 11ms duration, any axis
- Non-Operating Shock: 20G maximum, ½ sine wave, 11ms duration, any axis

---

### 4. Functionality

The RPM-130-AC-EU functions as a high-efficiency AC-to-DC conversion module designed for industrial rack systems. It converts standard AC mains input (100–240VAC) into a regulated 12VDC output suitable for powering networking equipment, controllers, communication devices, and other industrial electronics.

Operation Principle:
The unit employs an active PFC front-end to optimize input current waveform and reduce harmonic distortion. The internal switching regulator converts the rectified AC voltage into a stable DC output through high-frequency switching and feedback control. Integrated protection circuits continuously monitor voltage, current, and temperature to ensure safe operation under varying load conditions.

Use Cases & Applications:
- Industrial Ethernet switches and routers
- Automation controllers and PLCs
- Embedded computing systems
- Industrial communication gateways
- Rack-mounted instrumentation and monitoring systems
- Power distribution in control cabinets
- Redundant power configurations in network infrastructure

Compatibility:
- Designed for ORing chassis systems and compatible with standard 19-inch rack enclosures.
- EU power cord version ensures compliance with European electrical standards.
- Interoperable with other ORing RPM-130 series modules (e.g., RPM-130-AC-US for US regions).

---

### 5. Components & Accessories

Included Items:
- 1 × RPM-130-AC-EU Power Supply Module
- 1 × EU Power Cord
- 1 × Quick Installation Guide (QIG)

Optional Accessories:
- Rack-mount chassis (for multi-module configurations)
- Replacement power cords (region-specific)
- Cable management accessories
- Mounting brackets or screws (depending on rack configuration)

Connectors:
- Input Connector: Standard IEC AC inlet (EU type)
- Output Connector: DC terminal block or rear-panel connector (model dependent)
- Cooling Fan: Integrated, powered internally

---

### 6. Installation & Setup

Installation Requirements:
- Standard 19-inch rack or compatible chassis with adequate ventilation.
- Ambient temperature within -10°C to +70°C.
- Ensure airflow is not obstructed; maintain clearance for fan exhaust.
- Use only the supplied EU power cord or equivalent rated for 250VAC operation.

Mounting Options:
- Rack-mount installation using front panel screws.
- Can be installed as a single module or as part of a redundant power system.

Configuration Steps:
1. Verify input voltage compatibility (100–240VAC).
2. Mount the unit securely in the rack chassis.
3. Connect the AC input cord to the IEC inlet.
4. Connect the DC output terminals to the load, ensuring correct polarity.
5. Power on the unit and verify 12VDC output using a multimeter.
6. Monitor LED indicators (if present) for normal operation.

Safety Precautions:
- Disconnect power before installation or maintenance.
- Ensure proper grounding of the chassis.
- Avoid operating in high-humidity or corrosive environments.
- Do not block ventilation openings.

---

### 7. Performance & Capabilities

Power Output:
- Continuous 130W output at 12VDC, 10.8A maximum.
- Stable voltage regulation under varying load conditions (±1%).

Efficiency & Thermal Performance:
- 80% typical efficiency reduces heat generation.
- Integrated cooling fan maintains optimal internal temperature.
- Over-temperature protection activates at 130°C to prevent damage.

Dynamic Response:
- Fast transient response to load changes.
- Ripple and noise limited to 120mV, ensuring clean DC output for sensitive electronics.

Reliability:
- MTBF > 400,000 hours ensures long operational life.
- Designed for continuous 24/7 industrial operation.

Limitations:
- Maximum ambient operating temperature of 70°C; derating may apply above 50°C.
- Not intended for outdoor or hazardous environments without enclosure protection.
- Single output only (12VDC).

---

### 8. Standards & Compliance

Safety Certifications:
- UL60950-1 (Information Technology Equipment Safety)
- EN60950-1 (European Safety Standard)
- CUL: CAN/CSA C22.2 No. 60950-1 (Canadian Safety Standard)

Electrical Strength (Hi-Pot Tests):
- L, N to DC Output: 4242VDC, 1 minute, current limit 8mA
- L, N to FG (Frame Ground): 2121VDC, 1 minute, current limit 8mA
- Insulation Resistance: ≥50MΩ at room temperature, 500VDC test voltage

EMI/EMC Compliance:
- EMI: CISPR 22 Class A, EN55022 Class A, FCC Part 15 Class A
- EMS:
- EN61000-4-2 (Electrostatic Discharge)
- EN61000-4-3 (Radiated Susceptibility)
- EN61000-4-4 (Electrical Fast Transient/Burst)
- EN61000-4-5 (Surge Immunity)
- EN61000-4-6 (Conducted Susceptibility)
- EN61000-4-8 (Power Frequency Magnetic Field)
- EN61000-4-11 (Voltage Dips and Interruptions)
- Harmonic Current Compliance: IEC61000-3-2 Class A and Class D

Environmental & Reliability Standards:
- MIL-HDBK-217F2 for MTBF calculation
- Designed for industrial-grade environmental resilience

---

### 9. Additional Information

Warranty:
- 2-year limited manufacturer warranty covering defects in materials and workmanship under normal use.

Support & Maintenance:
- Technical support available via ORing Industrial Networking Corp.
- Contact:
- Telephone: +886-2-2218-1066
- Fax: +886-2-2218-1014
- Email: support@oring-networking.com
- Website: [www.oring-networking.com](http://www.oring-networking.com)

Maintenance Recommendations:
- Periodically inspect ventilation openings and clean dust buildup.
- Verify fan operation during routine maintenance.
- Check output voltage periodically to ensure regulation accuracy.
- Replace power cord if damaged or worn.

Product Lifecycle & Updates:
- Designed for long-term industrial deployment.
- Firmware updates not applicable (hardware-only device).
- Replacement models available in the RPM-130 series for regional variants (e.g., RPM-130-AC-US).

Environmental Considerations:
- RoHS-compliant manufacturing (implied by industrial standards).
- Printed documentation on recycled paper (as noted in QIG).

---

### Summary

The ORing RPM-130-AC-EU is a robust, high-efficiency 130W rack-mount power supply engineered for industrial networking and automation systems. With universal AC input (100–240VAC), regulated 12VDC output, and comprehensive protection features, it ensures reliable power delivery in demanding environments. Its compliance with international safety and EMC standards, combined with a long MTBF and integrated cooling, makes it an ideal choice for mission-critical applications requiring stable DC power in rack-mounted configurations.

The unit’s design emphasizes reliability, safety, and ease of integration, supporting both standalone and redundant power architectures. Backed by ORing’s two-year warranty and global support network, the RPM-130-AC-EU provides a dependable power solution for industrial and networking professionals seeking performance, compliance, and durability in a compact rack-mount form factor.