LOOKING FOR THE RIGHT
INDUSTRIAL SOLUTION?
Discover embedded, communication and automation solutions tailored to your application.
- Bi-Directional (BIDI) Transmission:
Utilizes a single optical fiber for both transmit (TX) and receive (RX) operations, reducing cabling costs and simplifying network infrastructure.
- Fast Ethernet Data Rate:
Supports 100 Mbps full-duplex data transmission compliant with IEEE 802.3u Fast Ethernet standards.
- Long-Distance Communication:
Provides stable optical communication up to 30 km over single-mode fiber (9/125 μm).
- Wavelength-Division Multiplexing (WDM):
Operates with TX at 1310 nm and RX at 1550 nm, enabling duplex communication over a single fiber strand.
- Compact SFP Form Factor:
Standard Small Form-factor Pluggable (SFP) design ensures compatibility with a wide range of network switches, routers, and media converters.
- Hot-Pluggable Interface:
Allows insertion and removal without powering down the host device, minimizing downtime during maintenance or upgrades.
- High Optical Sensitivity:
Receiver sensitivity rated at -32 dBm, ensuring reliable performance even under low optical power conditions.
- Wide Operating Temperature Range:
Standard model supports 0°C to 70°C; industrial-grade variant (SFP100B3-SS30-I) supports -40°C to 85°C for harsh environments.
- Low Power Consumption:
Designed for energy-efficient operation, suitable for embedded and industrial networking systems.
- Interoperability:
Fully compatible with complementary BIDI transceivers such as SFP100B5-SS30 (TX: 1550 nm / RX: 1310 nm).
Utilizes a single optical fiber for both transmit (TX) and receive (RX) operations, reducing cabling costs and simplifying network infrastructure.
- Fast Ethernet Data Rate:
Supports 100 Mbps full-duplex data transmission compliant with IEEE 802.3u Fast Ethernet standards.
- Long-Distance Communication:
Provides stable optical communication up to 30 km over single-mode fiber (9/125 μm).
- Wavelength-Division Multiplexing (WDM):
Operates with TX at 1310 nm and RX at 1550 nm, enabling duplex communication over a single fiber strand.
- Compact SFP Form Factor:
Standard Small Form-factor Pluggable (SFP) design ensures compatibility with a wide range of network switches, routers, and media converters.
- Hot-Pluggable Interface:
Allows insertion and removal without powering down the host device, minimizing downtime during maintenance or upgrades.
- High Optical Sensitivity:
Receiver sensitivity rated at -32 dBm, ensuring reliable performance even under low optical power conditions.
- Wide Operating Temperature Range:
Standard model supports 0°C to 70°C; industrial-grade variant (SFP100B3-SS30-I) supports -40°C to 85°C for harsh environments.
- Low Power Consumption:
Designed for energy-efficient operation, suitable for embedded and industrial networking systems.
- Interoperability:
Fully compatible with complementary BIDI transceivers such as SFP100B5-SS30 (TX: 1550 nm / RX: 1310 nm).
Comprehensive Product Summary – SFP100B3-SS30
### 1. Product Overview
Product Name: SFP100B3-SS30
Model Number: SFP100B3-SS30
Series: Fast Ethernet BIDI SFP Optical Transceiver Series
Article Number: SFP100B3-SS30
Manufacturer: ORing Industrial Networking Corp.
Product Type: 100 Mbps Single-Mode Bi-Directional (BIDI) SFP Optical Transceiver
Transmission Distance: 30 km
Transmission Wavelengths: TX: 1310 nm / RX: 1550 nm
Operating Temperature Range: 0°C to 70°C (standard model)
Industrial Grade Option: -40°C to 85°C (SFP100B3-SS30-I)
The ORing SFP100B3-SS30 is a compact, hot-pluggable optical transceiver module designed for Fast Ethernet applications over single-mode fiber (SMF). It supports bi-directional data transmission using a single optical fiber, significantly reducing fiber infrastructure requirements while maintaining high reliability and long-distance communication performance.
### 2. Key Features
- Bi-Directional (BIDI) Transmission:
Utilizes a single optical fiber for both transmit (TX) and receive (RX) operations, reducing cabling costs and simplifying network infrastructure.
- Fast Ethernet Data Rate:
Supports 100 Mbps full-duplex data transmission compliant with IEEE 802.3u Fast Ethernet standards.
- Long-Distance Communication:
Provides stable optical communication up to 30 km over single-mode fiber (9/125 μm).
- Wavelength-Division Multiplexing (WDM):
Operates with TX at 1310 nm and RX at 1550 nm, enabling duplex communication over a single fiber strand.
- Compact SFP Form Factor:
Standard Small Form-factor Pluggable (SFP) design ensures compatibility with a wide range of network switches, routers, and media converters.
- Hot-Pluggable Interface:
Allows insertion and removal without powering down the host device, minimizing downtime during maintenance or upgrades.
- High Optical Sensitivity:
Receiver sensitivity rated at -32 dBm, ensuring reliable performance even under low optical power conditions.
- Wide Operating Temperature Range:
Standard model supports 0°C to 70°C; industrial-grade variant (SFP100B3-SS30-I) supports -40°C to 85°C for harsh environments.
- Low Power Consumption:
Designed for energy-efficient operation, suitable for embedded and industrial networking systems.
- Interoperability:
Fully compatible with complementary BIDI transceivers such as SFP100B5-SS30 (TX: 1550 nm / RX: 1310 nm).
### 3. Technical Specifications
| Parameter | Specification |
|----------------|-------------------|
| Data Rate | 100 Mbps (Fast Ethernet) |
| Fiber Type | Single-mode fiber (SMF), 9/125 μm |
| Transmission Distance | Up to 30 km |
| Wavelengths | TX: 1310 nm / RX: 1550 nm |
| Optical Output Power (Max TX) | -8 dBm |
| Optical Output Power (Min TX) | -14 dBm |
| Receiver Sensitivity (Min Input Power) | -32 dBm |
| Receiver Saturation (Max Input Power) | 0 dBm |
| Link Budget | 18 dB (typical) |
| Loss of Signal (LOS) Asserted | -45 dBm |
| Connector Type | LC Simplex |
| Form Factor | SFP (Small Form-factor Pluggable) |
| Hot-Pluggable | Yes |
| Operating Temperature (Standard) | 0°C to 70°C |
| Operating Temperature (Industrial) | -40°C to 85°C |
| Storage Temperature | -40°C to 85°C |
| Humidity | 5% to 95% non-condensing |
| Power Supply Voltage | 3.3 V DC nominal |
| Power Consumption | <1 W typical |
| Dimensions (Approx.) | 13.4 mm (W) × 56.5 mm (L) × 8.5 mm (H) |
| Weight | Approx. 20 g |
| Compliance | SFP MSA, IEEE 802.3u 100BASE-FX, RoHS |
### 4. Functionality
The SFP100B3-SS30 operates as a bi-directional optical transceiver that transmits and receives Fast Ethernet signals over a single strand of single-mode fiber. It employs Wavelength Division Multiplexing (WDM) technology, where the transmitter emits light at 1310 nm and the receiver detects light at 1550 nm.
This configuration allows two SFP modules—one transmitting at 1310 nm and the other at 1550 nm—to form a full-duplex communication link using only one fiber. The SFP100B3-SS30 is typically paired with the SFP100B5-SS30 module for complementary wavelength operation.
Use Cases and Applications:
- Industrial Ethernet switches and routers
- Media converters and fiber extenders
- Remote monitoring and control systems
- Intelligent transportation systems (ITS)
- Power substation communication networks
- Security and surveillance backhaul links
- Long-distance point-to-point fiber connections
Compatibility:
- Compatible with standard SFP slots on ORing and third-party networking devices.
- Interoperable with other 100 Mbps BIDI SFP modules using complementary wavelengths (TX/RX pairing).
- Supports standard LC simplex fiber connectors.
### 5. Components & Accessories
Included Components:
- SFP100B3-SS30 transceiver module
- Protective dust cap for LC connector
- Product label with model and serial number
Optional Accessories:
- Fiber Patch Cords:
- *FPC-SCLC-SS3M*: SC/LC single-mode 9/125 μm, 3 m
- *FPC-LCLC-SS3M*: LC/LC single-mode 9/125 μm, 3 m
- Fiber Patch Adapters:
- *FCA-SC-SS*: SC/SC single-mode adapter, 9/125 μm
- DIN-Rail Power Supplies (for host devices):
- *DR-4512*: 45W, 12VDC/3.5A
- *DR-4524*: 45W, 24VDC/2A
- *DR-75-24*: 75W, 24VDC/3.2A
- Power Adapters:
- *PAA-121000*: 12VDC/1000mA, US plug
- *PAE-121000*: 12VDC/1000mA, EU plug
- RF Accessories (for integrated wireless systems):
- *RFA-P12-WG*: 2.4GHz panel antenna, 12 dBi
- *RFB-M2-150*: Magnetic antenna base, 1.5 m cable
These accessories ensure optimal connectivity, power stability, and integration flexibility for industrial and enterprise network deployments.
### 6. Installation & Setup
Installation Requirements:
- Compatible SFP slot on a switch, router, or media converter
- Single-mode fiber optic cable (9/125 μm) with LC simplex connector
- Complementary BIDI SFP module (e.g., SFP100B5-SS30) at the remote end
Installation Steps:
1. Power off the host device (optional for hot-pluggable systems).
2. Remove the protective cap from the SFP module and the LC connector.
3. Insert the SFP100B3-SS30 into the SFP port until it clicks into place.
4. Connect the single-mode fiber cable to the LC port.
5. Insert the complementary BIDI SFP module at the remote end.
6. Power on the device and verify link/activity LEDs.
Configuration:
- No software configuration required; the module is plug-and-play.
- Auto-negotiation and link detection are handled by the host device.
- For short-distance connections, use an optical attenuator if received power exceeds the receiver’s maximum input (0 dBm).
Mounting Options:
- Standard SFP cage integration in rack-mounted or DIN-rail network devices.
- Suitable for compact industrial enclosures and embedded systems.
### 7. Performance & Capabilities
Transmission Performance:
- Data Rate: 100 Mbps full-duplex
- Distance: Up to 30 km over single-mode fiber
- Optical Link Budget: 18 dB typical
- Receiver Sensitivity: -32 dBm ensures stable operation under low signal conditions
- Optical Saturation: 0 dBm maximum input power
Efficiency:
- Low power consumption (<1 W) minimizes heat generation and supports dense port configurations.
- High optical efficiency ensures minimal signal degradation over long distances.
Reliability:
- Designed for continuous 24/7 operation in industrial environments.
- Ruggedized construction and wide temperature tolerance ensure long-term stability.
Limitations:
- Not suitable for multi-mode fiber systems.
- Requires pairing with a complementary wavelength BIDI module (TX/RX inversion).
- Maximum distance limited to 30 km; for longer distances, use SFP100B3-SS40 or SFP100B3-SS60 models.
### 8. Standards & Compliance
Industry Standards:
- IEEE 802.3u 100BASE-FX Fast Ethernet
- SFP Multi-Source Agreement (MSA)
- ITU-T G.957 and G.958 optical interface standards
Regulatory Compliance:
- RoHS Compliant: Restriction of Hazardous Substances Directive
- CE Marking: Conforms to European safety and EMC requirements
- FCC Class A: Meets electromagnetic interference standards for industrial equipment
- Laser Safety: Class 1 laser product per IEC 60825-1
Environmental Compliance:
- Lead-free and halogen-free construction
- Designed for energy-efficient operation and reduced environmental impact
### 9. Additional Information
Warranty:
- Standard 3-year limited warranty from ORing Industrial Networking Corp.
- Covers defects in materials and workmanship under normal operating conditions.
Technical Support:
- Comprehensive online resources at [www.oring-networking.com](http://www.oring-networking.com)
- Access to datasheets, installation guides, and firmware updates
- Global technical support network for pre-sales and post-sales assistance
Maintenance:
- Periodic inspection of fiber connectors recommended to prevent dust contamination.
- Clean LC connectors using approved fiber cleaning tools.
- Replace protective caps when the module is not in use.
Firmware & Updates:
- No firmware required; hardware-based optical transceiver.
- Host device firmware may include diagnostic support for SFP monitoring (DDM/DOM not specified for this model).
Service Life:
- Typical MTBF (Mean Time Between Failures): >100,000 hours under standard conditions.
- Designed for long-term deployment in mission-critical industrial networks.
### Summary
The ORing SFP100B3-SS30 is a high-performance, single-mode, bi-directional SFP optical transceiver optimized for 100 Mbps Fast Ethernet applications over distances up to 30 km. Operating with TX at 1310 nm and RX at 1550 nm, it enables full-duplex communication over a single fiber strand, reducing infrastructure costs and simplifying deployment.
Engineered for reliability, the module supports wide temperature ranges, low power consumption, and hot-pluggable installation, making it ideal for industrial automation, transportation, and utility communication networks. Fully compliant with IEEE 802.3u and SFP MSA standards, the SFP100B3-SS30 ensures seamless interoperability with a wide range of networking equipment.
With its robust design, long-distance capability, and ease of integration, the SFP100B3-SS30 delivers a cost-effective and dependable optical connectivity solution for modern industrial and enterprise networks.
### 1. Product Overview
Product Name: SFP100B3-SS30
Model Number: SFP100B3-SS30
Series: Fast Ethernet BIDI SFP Optical Transceiver Series
Article Number: SFP100B3-SS30
Manufacturer: ORing Industrial Networking Corp.
Product Type: 100 Mbps Single-Mode Bi-Directional (BIDI) SFP Optical Transceiver
Transmission Distance: 30 km
Transmission Wavelengths: TX: 1310 nm / RX: 1550 nm
Operating Temperature Range: 0°C to 70°C (standard model)
Industrial Grade Option: -40°C to 85°C (SFP100B3-SS30-I)
The ORing SFP100B3-SS30 is a compact, hot-pluggable optical transceiver module designed for Fast Ethernet applications over single-mode fiber (SMF). It supports bi-directional data transmission using a single optical fiber, significantly reducing fiber infrastructure requirements while maintaining high reliability and long-distance communication performance.
### 2. Key Features
- Bi-Directional (BIDI) Transmission:
Utilizes a single optical fiber for both transmit (TX) and receive (RX) operations, reducing cabling costs and simplifying network infrastructure.
- Fast Ethernet Data Rate:
Supports 100 Mbps full-duplex data transmission compliant with IEEE 802.3u Fast Ethernet standards.
- Long-Distance Communication:
Provides stable optical communication up to 30 km over single-mode fiber (9/125 μm).
- Wavelength-Division Multiplexing (WDM):
Operates with TX at 1310 nm and RX at 1550 nm, enabling duplex communication over a single fiber strand.
- Compact SFP Form Factor:
Standard Small Form-factor Pluggable (SFP) design ensures compatibility with a wide range of network switches, routers, and media converters.
- Hot-Pluggable Interface:
Allows insertion and removal without powering down the host device, minimizing downtime during maintenance or upgrades.
- High Optical Sensitivity:
Receiver sensitivity rated at -32 dBm, ensuring reliable performance even under low optical power conditions.
- Wide Operating Temperature Range:
Standard model supports 0°C to 70°C; industrial-grade variant (SFP100B3-SS30-I) supports -40°C to 85°C for harsh environments.
- Low Power Consumption:
Designed for energy-efficient operation, suitable for embedded and industrial networking systems.
- Interoperability:
Fully compatible with complementary BIDI transceivers such as SFP100B5-SS30 (TX: 1550 nm / RX: 1310 nm).
### 3. Technical Specifications
| Parameter | Specification |
|----------------|-------------------|
| Data Rate | 100 Mbps (Fast Ethernet) |
| Fiber Type | Single-mode fiber (SMF), 9/125 μm |
| Transmission Distance | Up to 30 km |
| Wavelengths | TX: 1310 nm / RX: 1550 nm |
| Optical Output Power (Max TX) | -8 dBm |
| Optical Output Power (Min TX) | -14 dBm |
| Receiver Sensitivity (Min Input Power) | -32 dBm |
| Receiver Saturation (Max Input Power) | 0 dBm |
| Link Budget | 18 dB (typical) |
| Loss of Signal (LOS) Asserted | -45 dBm |
| Connector Type | LC Simplex |
| Form Factor | SFP (Small Form-factor Pluggable) |
| Hot-Pluggable | Yes |
| Operating Temperature (Standard) | 0°C to 70°C |
| Operating Temperature (Industrial) | -40°C to 85°C |
| Storage Temperature | -40°C to 85°C |
| Humidity | 5% to 95% non-condensing |
| Power Supply Voltage | 3.3 V DC nominal |
| Power Consumption | <1 W typical |
| Dimensions (Approx.) | 13.4 mm (W) × 56.5 mm (L) × 8.5 mm (H) |
| Weight | Approx. 20 g |
| Compliance | SFP MSA, IEEE 802.3u 100BASE-FX, RoHS |
### 4. Functionality
The SFP100B3-SS30 operates as a bi-directional optical transceiver that transmits and receives Fast Ethernet signals over a single strand of single-mode fiber. It employs Wavelength Division Multiplexing (WDM) technology, where the transmitter emits light at 1310 nm and the receiver detects light at 1550 nm.
This configuration allows two SFP modules—one transmitting at 1310 nm and the other at 1550 nm—to form a full-duplex communication link using only one fiber. The SFP100B3-SS30 is typically paired with the SFP100B5-SS30 module for complementary wavelength operation.
Use Cases and Applications:
- Industrial Ethernet switches and routers
- Media converters and fiber extenders
- Remote monitoring and control systems
- Intelligent transportation systems (ITS)
- Power substation communication networks
- Security and surveillance backhaul links
- Long-distance point-to-point fiber connections
Compatibility:
- Compatible with standard SFP slots on ORing and third-party networking devices.
- Interoperable with other 100 Mbps BIDI SFP modules using complementary wavelengths (TX/RX pairing).
- Supports standard LC simplex fiber connectors.
### 5. Components & Accessories
Included Components:
- SFP100B3-SS30 transceiver module
- Protective dust cap for LC connector
- Product label with model and serial number
Optional Accessories:
- Fiber Patch Cords:
- *FPC-SCLC-SS3M*: SC/LC single-mode 9/125 μm, 3 m
- *FPC-LCLC-SS3M*: LC/LC single-mode 9/125 μm, 3 m
- Fiber Patch Adapters:
- *FCA-SC-SS*: SC/SC single-mode adapter, 9/125 μm
- DIN-Rail Power Supplies (for host devices):
- *DR-4512*: 45W, 12VDC/3.5A
- *DR-4524*: 45W, 24VDC/2A
- *DR-75-24*: 75W, 24VDC/3.2A
- Power Adapters:
- *PAA-121000*: 12VDC/1000mA, US plug
- *PAE-121000*: 12VDC/1000mA, EU plug
- RF Accessories (for integrated wireless systems):
- *RFA-P12-WG*: 2.4GHz panel antenna, 12 dBi
- *RFB-M2-150*: Magnetic antenna base, 1.5 m cable
These accessories ensure optimal connectivity, power stability, and integration flexibility for industrial and enterprise network deployments.
### 6. Installation & Setup
Installation Requirements:
- Compatible SFP slot on a switch, router, or media converter
- Single-mode fiber optic cable (9/125 μm) with LC simplex connector
- Complementary BIDI SFP module (e.g., SFP100B5-SS30) at the remote end
Installation Steps:
1. Power off the host device (optional for hot-pluggable systems).
2. Remove the protective cap from the SFP module and the LC connector.
3. Insert the SFP100B3-SS30 into the SFP port until it clicks into place.
4. Connect the single-mode fiber cable to the LC port.
5. Insert the complementary BIDI SFP module at the remote end.
6. Power on the device and verify link/activity LEDs.
Configuration:
- No software configuration required; the module is plug-and-play.
- Auto-negotiation and link detection are handled by the host device.
- For short-distance connections, use an optical attenuator if received power exceeds the receiver’s maximum input (0 dBm).
Mounting Options:
- Standard SFP cage integration in rack-mounted or DIN-rail network devices.
- Suitable for compact industrial enclosures and embedded systems.
### 7. Performance & Capabilities
Transmission Performance:
- Data Rate: 100 Mbps full-duplex
- Distance: Up to 30 km over single-mode fiber
- Optical Link Budget: 18 dB typical
- Receiver Sensitivity: -32 dBm ensures stable operation under low signal conditions
- Optical Saturation: 0 dBm maximum input power
Efficiency:
- Low power consumption (<1 W) minimizes heat generation and supports dense port configurations.
- High optical efficiency ensures minimal signal degradation over long distances.
Reliability:
- Designed for continuous 24/7 operation in industrial environments.
- Ruggedized construction and wide temperature tolerance ensure long-term stability.
Limitations:
- Not suitable for multi-mode fiber systems.
- Requires pairing with a complementary wavelength BIDI module (TX/RX inversion).
- Maximum distance limited to 30 km; for longer distances, use SFP100B3-SS40 or SFP100B3-SS60 models.
### 8. Standards & Compliance
Industry Standards:
- IEEE 802.3u 100BASE-FX Fast Ethernet
- SFP Multi-Source Agreement (MSA)
- ITU-T G.957 and G.958 optical interface standards
Regulatory Compliance:
- RoHS Compliant: Restriction of Hazardous Substances Directive
- CE Marking: Conforms to European safety and EMC requirements
- FCC Class A: Meets electromagnetic interference standards for industrial equipment
- Laser Safety: Class 1 laser product per IEC 60825-1
Environmental Compliance:
- Lead-free and halogen-free construction
- Designed for energy-efficient operation and reduced environmental impact
### 9. Additional Information
Warranty:
- Standard 3-year limited warranty from ORing Industrial Networking Corp.
- Covers defects in materials and workmanship under normal operating conditions.
Technical Support:
- Comprehensive online resources at [www.oring-networking.com](http://www.oring-networking.com)
- Access to datasheets, installation guides, and firmware updates
- Global technical support network for pre-sales and post-sales assistance
Maintenance:
- Periodic inspection of fiber connectors recommended to prevent dust contamination.
- Clean LC connectors using approved fiber cleaning tools.
- Replace protective caps when the module is not in use.
Firmware & Updates:
- No firmware required; hardware-based optical transceiver.
- Host device firmware may include diagnostic support for SFP monitoring (DDM/DOM not specified for this model).
Service Life:
- Typical MTBF (Mean Time Between Failures): >100,000 hours under standard conditions.
- Designed for long-term deployment in mission-critical industrial networks.
### Summary
The ORing SFP100B3-SS30 is a high-performance, single-mode, bi-directional SFP optical transceiver optimized for 100 Mbps Fast Ethernet applications over distances up to 30 km. Operating with TX at 1310 nm and RX at 1550 nm, it enables full-duplex communication over a single fiber strand, reducing infrastructure costs and simplifying deployment.
Engineered for reliability, the module supports wide temperature ranges, low power consumption, and hot-pluggable installation, making it ideal for industrial automation, transportation, and utility communication networks. Fully compliant with IEEE 802.3u and SFP MSA standards, the SFP100B3-SS30 ensures seamless interoperability with a wide range of networking equipment.
With its robust design, long-distance capability, and ease of integration, the SFP100B3-SS30 delivers a cost-effective and dependable optical connectivity solution for modern industrial and enterprise networks.
-
Product_Selection_Guide_Accessories.pdf
PDF Catalog
-
Oring-Accessories.pdf
PDF Catalog
No accessories available.