Comprehensive Product Summary: ORing SFP10G-MM 10Gbps SFP+ Optical Transceiver

---

### 1. Product Overview

Product Name: SFP10G-MM
Model Number: SFP10G-MM
Series: 10G SFP+ Optical Transceiver Series
Article Number: SFP10G-MM
Manufacturer: ORing Industrial Networking Corp.
Product Type: 10 Gigabit Ethernet SFP+ Optical Transceiver (Multi-Mode)
Website: [www.oring-networking.com](http://www.oring-networking.com)

The ORing SFP10G-MM is a high-performance, hot-pluggable 10 Gigabit SFP+ optical transceiver module designed for short-range data communication and networking applications. It operates over multi-mode fiber (MMF) and supports data transmission distances up to 300 meters using an 850 nm wavelength. The transceiver is optimized for use in high-speed Ethernet switches, routers, and network interface cards that support the SFP+ standard. It is engineered for reliable operation in standard commercial environments with an operating temperature range of 0°C to 70°C.

---

### 2. Key Features

- 10 Gigabit Ethernet Performance: Supports data rates up to 10 Gbps, enabling high-speed backbone and aggregation network connections.
- Multi-Mode Fiber (MMF) Support: Designed for use with 50/125 μm or 62.5/125 μm multi-mode optical fiber.
- Transmission Distance: Capable of transmitting data up to 300 meters over OM3 multi-mode fiber.
- Wavelength: Operates at 850 nm, optimized for short-range optical communication.
- Hot-Pluggable SFP+ Form Factor: Allows easy installation and replacement without powering down the host device.
- Low Power Consumption: Energy-efficient design suitable for dense network environments.
- Digital Diagnostic Monitoring (DDM): Supports real-time monitoring of parameters such as optical output power, input power, temperature, and supply voltage (depending on host system support).
- Compatibility: Fully compliant with IEEE 802.3ae 10GBASE-SR standard and SFF-8431/SFF-8432 MSA specifications.
- Operating Temperature Range: 0°C to 70°C, suitable for standard commercial and enterprise environments.
- Compact and Rugged Design: Built for durability and consistent performance in demanding network infrastructures.
- Interoperability: Compatible with a wide range of ORing industrial switches, media converters, and third-party SFP+ ports adhering to MSA standards.

---

### 3. Technical Specifications

| Parameter | Specification |
|----------------|-------------------|
| Form Factor | SFP+ (Small Form-factor Pluggable Plus) |
| Data Rate | 10 Gbps nominal |
| Fiber Type | Multi-mode fiber (MMF) |
| Wavelength | 850 nm |
| Transmission Distance | Up to 300 meters (OM3 fiber) |
| Connector Type | LC Duplex |
| Optical Output Power (Typical) | -7.3 dBm to -1 dBm (typical for 10GBASE-SR) |
| Receiver Sensitivity | ≤ -11.1 dBm |
| Power Supply Voltage | +3.3 V DC |
| Power Consumption | < 1 W typical |
| Operating Temperature | 0°C to +70°C |
| Storage Temperature | -40°C to +85°C |
| Relative Humidity | 5% to 95% non-condensing |
| Dimensions (approx.) | 56.5 mm (L) × 13.7 mm (W) × 8.5 mm (H) |
| Weight | Approx. 20 g |
| Compliance Standards | IEEE 802.3ae 10GBASE-SR, SFF-8431, SFF-8432, RoHS compliant |

---

### 4. Functionality

The SFP10G-MM transceiver converts electrical signals from the host device into optical signals for transmission over multi-mode fiber and vice versa. It uses an 850 nm VCSEL (Vertical-Cavity Surface-Emitting Laser) transmitter and a PIN photodiode receiver. The module is designed for duplex communication, using two fibers—one for transmitting and one for receiving data.

Typical Use Cases:
- High-speed data center interconnects
- Enterprise LAN backbone links
- Aggregation switches and routers
- Storage Area Networks (SANs)
- Industrial Ethernet backbones
- Short-range server-to-switch connections

Compatibility:
- Compatible with ORing industrial Ethernet switches and media converters supporting SFP+ slots.
- Interoperable with other MSA-compliant 10GBASE-SR optical modules.
- Works with standard LC duplex connectors and OM3/OM4 multi-mode fiber cables.

---

### 5. Components & Accessories

Included Components:
- 1 × SFP10G-MM transceiver module
- Protective dust caps for LC connectors
- Product documentation and compliance label

Optional Accessories (from ORing product ecosystem):

Fiber Patch Cords (Multi-mode):
| Model | Connector Type | Fiber Type | Length |
|--------|----------------|-------------|---------|
| FPC-LCLC-MM3M | LC/LC | 62.5/125 μm | 3 m |
| FPC-SCLC-MM3M | SC/LC | 62.5/125 μm | 3 m |
| FPC-SCST-MM3M | SC/ST | 62.5/125 μm | 3 m |
| FPC-SCSC-MM3M | SC/SC | 62.5/125 μm | 3 m |

Fiber Patch Adapters:
| Model | Connector Type | Fiber Type |
|--------|----------------|-------------|
| FCA-SC-MM | SC/SC | 62.5/125 μm |

Power Accessories (for host devices):
- DIN-Rail Power Supplies: DR-4512, DR-4524, DR-75-12, DR-75-24, DR-120-12, DR-120-24, DR-120-48, SDR-240-48, SDR-480-48
- Power Adapters: PAA-121000 (US plug), PAE-121000 (EU plug), PAX-482500 (no cord)

RF and Networking Accessories (for integrated systems):
- RF antenna bases (RFB-M2 series)
- RF cables (RFC series)
- RF surge protectors (RFP series)
- WLAN antennas (RFA series)
- M12 and M23 industrial Ethernet cables (M12C/M23C series)

These accessories ensure seamless integration of the SFP10G-MM into ORing’s rugged industrial networking ecosystem.

---

### 6. Installation & Setup

Installation Requirements:
- Host device with an available SFP+ slot compliant with SFF-8431/SFF-8432 standards.
- Multi-mode fiber optic cable with LC duplex connectors.
- Clean optical connectors to ensure optimal signal transmission.

Installation Steps:
1. Power off or ensure the host device supports hot-plugging.
2. Remove the protective dust cap from the SFP+ port and the transceiver.
3. Insert the SFP10G-MM module into the SFP+ slot until it clicks securely.
4. Connect the LC duplex fiber cable—transmit (TX) to receive (RX) and vice versa.
5. Verify link status via the host device’s LED indicators or management interface.
6. If the link does not establish, check fiber polarity, cleanliness, and compatibility.

Configuration:
- The SFP10G-MM is plug-and-play; no manual configuration is required.
- Digital diagnostics can be accessed via the host system’s management software if supported.

Mounting Options:
- Direct insertion into SFP+ ports on switches, routers, or media converters.
- Compatible with ORing’s DIN-rail-mounted industrial switches for rugged environments.

---

### 7. Performance & Capabilities

Speed and Throughput:
- Supports full-duplex 10 Gbps data transmission, providing up to 20 Gbps aggregate bandwidth per link.

Transmission Distance:
- Up to 300 meters over OM3 multi-mode fiber (50/125 μm).
- Up to 82 meters over OM2 multi-mode fiber (62.5/125 μm).

Optical Characteristics:
- Transmitter: 850 nm VCSEL laser
- Receiver: PIN photodiode
- Optical Output Power: -7.3 dBm to -1 dBm
- Receiver Sensitivity: ≤ -11.1 dBm
- Link Budget: Approximately 3.5 dB typical

Electrical Characteristics:
- Supply Voltage: 3.3 V ± 5%
- Power Consumption: < 1 W typical
- Signal Interface: Electrical serial interface compliant with SFI (Serial Interface) standard.

Reliability and Efficiency:
- Designed for continuous operation in high-density network environments.
- Low power dissipation reduces heat generation and improves system longevity.
- High MTBF (Mean Time Between Failures) ensures dependable long-term performance.

Limitations:
- Restricted to short-range applications (≤ 300 m).
- Not suitable for single-mode fiber or long-haul transmission.
- Operating temperature limited to 0–70°C (not industrial-grade).

---

### 8. Standards & Compliance

Industry Standards:
- IEEE 802.3ae 10GBASE-SR
- SFF-8431 (SFP+ Electrical Interface)
- SFF-8432 (SFP+ Mechanical Specification)
- SFF-8472 (Digital Diagnostic Monitoring Interface)
- RoHS Directive 2011/65/EU compliant
- CE and FCC Class A compliant (when integrated into certified host systems)

Regulatory Compliance:
- Safety: Complies with IEC 60825-1 and IEC 60825-2 for laser safety.
- EMC: Meets FCC Part 15 Class A and EN55022 Class A emission standards.
- Environmental: RoHS and WEEE compliant, ensuring environmentally responsible manufacturing.

Interoperability:
- Fully compatible with ORing’s industrial Ethernet switches, media converters, and routers.
- Interoperable with third-party SFP+ modules adhering to MSA standards.

---

### 9. Additional Information

Warranty:
- Standard 3-year limited warranty from ORing Industrial Networking Corp.
- Covers defects in materials and workmanship under normal use conditions.

Support:
- Comprehensive technical support via ORing’s global service network.
- Online resources include datasheets, installation guides, and firmware updates.
- Email and phone support available for configuration and troubleshooting.

Maintenance:
- Periodic cleaning of LC connectors recommended to maintain optimal optical performance.
- Avoid exposure to dust and moisture when transceiver is not in use—always use protective caps.
- Monitor DDM parameters (if supported) to detect early signs of degradation.

Firmware & Updates:
- The SFP10G-MM itself does not require firmware updates; however, host devices may receive firmware enhancements to improve SFP+ compatibility and diagnostics.

Environmental Considerations:
- Designed for standard commercial environments (0–70°C).
- For extended temperature or industrial-grade applications, ORing offers alternative SFP models (e.g., SFP1G-SX-I, SFP100-SS30-I).

Product Lifecycle & Availability:
- Long-term availability guaranteed as part of ORing’s industrial networking product line.
- Backward compatibility with legacy 1G/100M SFP slots (at reduced performance, depending on host support).

---

### Summary

The ORing SFP10G-MM is a robust, high-speed optical transceiver module engineered for 10 Gigabit Ethernet applications over multi-mode fiber. Operating at 850 nm and supporting distances up to 300 meters, it provides a cost-effective and reliable solution for short-range data center, enterprise, and industrial network connections. Its compliance with IEEE and MSA standards ensures interoperability across a wide range of network equipment. With low power consumption, hot-pluggable design, and dependable performance, the SFP10G-MM is an ideal choice for organizations seeking to enhance network bandwidth and reliability in high-density environments.

---

Manufacturer Contact:
ORing Industrial Networking Corp.
Website: [www.oring-networking.com](http://www.oring-networking.com)
Email: info@oring-networking.com
Phone: +886-2-2218-1066

Tagline: *Designed for Rugged Excellence*