Comprehensive Product Summary – ORing SPL‑101GT Industrial PoE Splitter

---

### 1. Product Overview

Product Name: PoE Splitter 1‑Port 30 W 1.25 A @ 24 V IP30 Slim Case
Model: SPL‑101GT
Series: SPL‑101GT Series
Article Number: SPL‑101GT
Manufacturer: ORing Industrial Networking Corp.
Version: 1.1

The ORing SPL‑101GT is an industrial‑grade, high‑power Power over Ethernet (PoE) splitter designed to separate power and data from a single Ethernet cable. It supports IEEE 802.3at (PoE+) standards and provides a 24 V DC output at up to 1.125 A (27 W), enabling non‑PoE devices such as wireless access points, IP cameras, and VoIP phones to be powered through a PoE network infrastructure. The unit features a rugged IP30‑rated metal enclosure, compact slim‑case design, and DIN‑rail or wall‑mount installation options, making it suitable for industrial and commercial environments.

---

### 2. Key Features

- IEEE 802.3at Compliant: Fully compliant with the PoE+ standard, supporting up to 30 W input power.
- Gigabit Ethernet Support: Handles 10/100/1000 Base‑T(X) data rates for both PoE input and data output ports.
- High‑Power Output: Provides 24 V DC at 1.125 A (27 W) for SPL‑101GT or 12 V DC at 1.6 A (20 W) for SPL‑101GT‑12V variant.
- Power Isolation: 1500 V isolation protection between input and output circuits.
- Comprehensive Protection: Built‑in short‑circuit, overload, and over‑voltage protection mechanisms.
- Rugged Industrial Design: IP30‑rated metal housing ensures durability in harsh environments.
- Flexible Mounting: Supports DIN‑rail and wall‑mount installation.
- Wide Operating Temperature: Operates reliably from ‑40 °C to +70 °C.
- Compact Form Factor: Slim design (26.1 × 70 × 95 mm) for space‑constrained installations.
- LED Status Indicator: Power/Ready LED for quick operational status verification.
- Auto MDI/MDIX: Simplifies network cabling by automatically detecting cable type.
- Industrial Reliability: Designed for continuous operation in mission‑critical network environments.

---

### 3. Technical Specifications

| Parameter | Specification |
|----------------|-------------------|
| Model | SPL‑101GT |
| Input Voltage | 36 – 57 V DC via RJ‑45 PoE input |
| Output Voltage / Current | 24 V DC @ 1.125 A (max 27 W) |
| Alternative Model | SPL‑101GT‑12V: 12 V DC @ 1.6 A (max 20 W) |
| Ethernet Ports | 1 × 10/100/1000 Base‑T(X) PoE IN (Data + Power) + 1 × 10/100/1000 Base‑T(X) Data OUT |
| Connector Type | RJ‑45, Auto MDI/MDIX |
| Isolation Protection | 1500 V |
| Protection Features | Short‑circuit, overload, over‑voltage |
| Enclosure Rating | IP30, metal housing |
| Dimensions (W × D × H) | 26.1 × 70 × 95 mm (1.03 × 2.76 × 3.74 in.) |
| Weight | 250 g |
| LED Indicators | Power/Ready (Blue = Normal operation) |
| Operating Temperature | ‑40 °C to +70 °C (‑40 °F to +158 °F) |
| Storage Temperature | ‑40 °C to +85 °C (‑40 °F to +185 °F) |
| Operating Humidity | 5 % – 90 % RH, non‑condensing |
| Mounting Options | DIN‑rail or wall‑mount |
| Compliance Standards | IEEE 802.3at, IEEE 802.3 10/100/1000 Base‑T(X) |
| Certifications | FCC Part 15 Class A, EN 55022 Class A, EN 61000‑4‑2/3/4/5/6/8/11, EN 60950‑1 |
| Warranty | 5 years |

---

### 4. Functionality

The SPL‑101GT functions as a PoE splitter, enabling the separation of power and data transmitted over a single Ethernet cable. It receives combined data and power from a PoE‑enabled switch or injector through its PoE IN port, then outputs data‑only Ethernet through the Data OUT port and regulated DC power through a terminal block or output connector.

Operational Flow:
1. PoE Input: The splitter accepts 36–57 V DC power and Ethernet data via the RJ‑45 PoE IN port.
2. Power Conversion: Internal DC‑DC conversion circuitry regulates the PoE voltage down to 24 V DC (or 12 V DC for the alternate model).
3. Data Output: The Ethernet signal is passed through to the Data OUT port without power.
4. Power Output: The regulated DC output is available for powering non‑PoE devices.

Typical Applications:
- Supplying power to wireless access points that require 24 V DC input.
- Powering IP surveillance cameras in remote or outdoor installations.
- Supporting VoIP phones, industrial controllers, or embedded systems without native PoE support.
- Integrating into industrial automation, transportation, or building management networks where centralized PoE power distribution is used.

Compatibility:
- Compatible with IEEE 802.3at PoE+ PSE devices (switches, injectors).
- Supports 10/100/1000 Mbps Ethernet speeds.
- Works with both MDI and MDI‑X network interfaces.

---

### 5. Components & Accessories

Included Items:
1. SPL‑101GT PoE Splitter Unit
2. 4‑Pin Terminal Block – for DC power output connection.
3. Dust Cover (RJ‑45) – protects unused ports from dust ingress.
4. Wall‑Mount Kit – includes mounting brackets and screws.
5. 25 mm DIN‑Rail Kit – for industrial panel installation.
6. Quick Installation Guide (QIG) – printed on recycled paper.

Optional Accessories:
- RJ‑45 Ethernet Cables (straight‑through or cross‑over, depending on network topology).
- PoE Injector or PoE Switch compliant with IEEE 802.3at standard.

Connectors:
- RJ‑45 PoE IN Port: Receives data + power.
- RJ‑45 Data OUT Port: Outputs data only.
- 4‑Pin Terminal Block: Provides regulated DC output (12 V or 24 V).

---

### 6. Installation & Setup

Mounting Options:
- DIN‑Rail Installation:
1. Attach the DIN‑rail clip to the rear of the unit.
2. Hook the top of the clip onto the DIN‑rail and press the bottom until it clicks.
3. Ensure the unit is securely fastened and vertically aligned.

- Wall‑Mount Installation:
1. Use the provided wall‑mount brackets and M3 × 3 mm screws.
2. Align the unit on the wall surface and secure it using the screws.

Connection Procedure:
1. Connect the PoE IN port to a PoE‑enabled switch or injector using a Cat5e/6 Ethernet cable.
2. Connect the Data OUT port to the non‑PoE device’s Ethernet interface.
3. Wire the DC output terminal block to the device’s power input (observe polarity).
4. Verify the Power LED indicator is illuminated (Blue = normal operation).

Configuration:
- No software configuration required; the splitter operates automatically once connected.
- Ensure that the total power consumption of the connected device does not exceed the rated output (27 W for 24 V model).

Safety Notes:
- Do not short ‑Vdc pins (pins 7 & 8 or 3 & 6 depending on wiring scheme) to ground.
- Maintain proper ventilation and avoid installation in high‑humidity or corrosive environments.

---

### 7. Performance & Capabilities

Power Handling:
- Input power up to 30 W (PoE+ standard).
- Output power up to 27 W (24 V @ 1.125 A).
- High‑efficiency DC‑DC conversion minimizes power loss and heat generation.

Network Performance:
- Supports Gigabit Ethernet throughput with minimal latency.
- Transparent data pass‑through ensures no degradation of network performance.
- Auto‑negotiation and Auto MDI/MDIX simplify integration into existing networks.

Electrical Protection:
- Short‑Circuit Protection: Automatically limits current to prevent damage.
- Overload Protection: Shuts down output when load exceeds rated capacity.
- Over‑Voltage Protection: Prevents excessive input voltage from reaching the output.
- Isolation Protection: 1500 V isolation between input and output circuits enhances safety and noise immunity.

Environmental Performance:
- Designed for industrial temperature range (‑40 °C to +70 °C).
- Operates reliably in 5 % – 90 % non‑condensing humidity.
- IP30 enclosure provides protection against solid objects > 2.5 mm.

Limitations:
- Not suitable for devices requiring more than 27 W output.
- Does not provide PoE pass‑through (data‑only output).
- Requires a PoE+ (IEEE 802.3at) compliant power source for full performance.

---

### 8. Standards & Compliance

Industry Standards:
- IEEE 802.3 10/100/1000 Base‑T(X) – Ethernet communication.
- IEEE 802.3at (PoE+) – Power over Ethernet standard for up to 30 W.

Electromagnetic Compatibility (EMC):
- EMI: FCC Part 15 Class A, CISPR (EN 55022) Class A.
- EMS:
- EN 61000‑4‑2 (ESD) – Electrostatic discharge immunity.
- EN 61000‑4‑3 (RS) – Radiated susceptibility.
- EN 61000‑4‑4 (EFT) – Electrical fast transient immunity.
- EN 61000‑4‑5 (Surge) – Surge immunity.
- EN 61000‑4‑6 (CS) – Conducted susceptibility.
- EN 61000‑4‑8 – Power frequency magnetic field immunity.
- EN 61000‑4‑11 – Voltage dips and interruptions.

Safety Certification:
- EN 60950‑1 – Information technology equipment safety standard.

Environmental Compliance:
- IP30 enclosure rating ensures protection against dust and solid objects.
- Designed for industrial environments with extended temperature and humidity tolerance.

---

### 9. Additional Information

Warranty:
- 5‑year limited warranty covering manufacturing defects and performance reliability under normal operating conditions.

Support & Documentation:
- Quick Installation Guide (QIG) included in the package.
- Additional technical resources, datasheets, and firmware updates available from ORing Industrial Networking Corp. website or authorized distributors.

Maintenance:
- The SPL‑101GT requires minimal maintenance.
- Periodically inspect connectors and mounting hardware for secure attachment.
- Clean the exterior with a dry, lint‑free cloth; avoid solvents or liquids.

Firmware & Updates:
- The device operates as a hardware‑based splitter and does not require firmware updates.
- Any revisions to electrical or mechanical design are reflected in updated product versions (e.g., Version 1.1).

Service & Replacement:
- Units can be serviced or replaced under warranty through authorized ORing service centers.
- Replacement parts and accessories (terminal blocks, mounting kits) are available separately.

---

### Summary

The ORing SPL‑101GT is a compact, industrial‑grade Gigabit PoE splitter engineered for high‑reliability applications requiring separation of power and data from a PoE network. With IEEE 802.3at compliance, 27 W output capacity, and robust protection features, it enables seamless integration of non‑PoE devices into PoE infrastructures. Its rugged IP30 metal housing, wide temperature tolerance, and flexible mounting options make it ideal for deployment in industrial automation, transportation, and surveillance systems. Backed by a 5‑year warranty and comprehensive compliance with international standards, the SPL‑101GT delivers dependable performance and long‑term operational stability in demanding network environments.