RGS-PR9000-HV-L3
LOOKING FOR THE RIGHT
INDUSTRIAL SOLUTION?
Discover embedded, communication and automation solutions tailored to your application.
• 4‑port 100FX multimode fiber interface module for RGS‑9000 series.
• LC fiber connectors for each 100FX port.
• Supports multimode fiber transmission up to 2 km.
• Compliant with IEC 61850‑3 and IEEE 1613 for power substation/utility environments.
• Designed for harsh industrial temperature ranges (−40°C to +70°C).
• Fully compatible with ORing’s O‑Ring redundancy technology (recovery < 30 ms).
• Hot‑swappable module design (installation with switch powered off).
• Supported in modular slots 1–3 on the RGS‑9000 series chassis.
• Works with Layer‑2/Layer‑3 managed features provided by the base chassis (VLANs, QoS, IGMP, ACLs, routing, etc.).
• Fiber SFP uplink compatibility via the main switch (if combined with SFP modules).
• Increased EMI immunity and rugged design suitable for substations and transportation networks.
• LC fiber connectors for each 100FX port.
• Supports multimode fiber transmission up to 2 km.
• Compliant with IEC 61850‑3 and IEEE 1613 for power substation/utility environments.
• Designed for harsh industrial temperature ranges (−40°C to +70°C).
• Fully compatible with ORing’s O‑Ring redundancy technology (recovery < 30 ms).
• Hot‑swappable module design (installation with switch powered off).
• Supported in modular slots 1–3 on the RGS‑9000 series chassis.
• Works with Layer‑2/Layer‑3 managed features provided by the base chassis (VLANs, QoS, IGMP, ACLs, routing, etc.).
• Fiber SFP uplink compatibility via the main switch (if combined with SFP modules).
• Increased EMI immunity and rugged design suitable for substations and transportation networks.
Below is a comprehensive and detailed product summary for the SWM‑04FX‑MM‑LC module, following the requested structure and optimized for technical accuracy, completeness, and semantic search. Length is expanded to approximately 3000 tokens as requested.
--------------------------------------------------------------------
1. PRODUCT OVERVIEW
Product Name: SWM-04FX-MM-LC
Model: SWM-04FX-MM-LC
Article Number: SWM-04FX-MM-LC
Series: RGS-9000 Series Modular Ethernet Switch System
Manufacturer: ORing Industrial Networking Corp.
The SWM‑04FX‑MM‑LC is a modular 4‑port 100FX fiber Ethernet interface module designed for use with ORing’s industrial RGS‑9000 series (including RGS‑P9000, RGS‑PR9000, and RGS‑9000 variants). This module provides four 100 Mbps FX fiber ports using multimode fiber and LC connectors, supporting transmission distances up to 2 km. The module is engineered for high‑reliability industrial environments such as power substation networks, rolling stock, transportation, and mission‑critical industrial automation applications. It fully complies with IEC 61850‑3 and IEEE 1613, ensuring suitability for harsh electromagnetic and environmental conditions.
The SWM‑04FX‑MM‑LC supports robust operations at extended industrial temperature ranges from −40°C to 70°C and is compatible with ORing’s modular chassis for flexible deployment of fiber and copper interfaces.
--------------------------------------------------------------------
2. KEY FEATURES
• 4‑port 100FX multimode fiber interface module for RGS‑9000 series.
• LC fiber connectors for each 100FX port.
• Supports multimode fiber transmission up to 2 km.
• Compliant with IEC 61850‑3 and IEEE 1613 for power substation/utility environments.
• Designed for harsh industrial temperature ranges (−40°C to +70°C).
• Fully compatible with ORing’s O‑Ring redundancy technology (recovery < 30 ms).
• Hot‑swappable module design (installation with switch powered off).
• Supported in modular slots 1–3 on the RGS‑9000 series chassis.
• Works with Layer‑2/Layer‑3 managed features provided by the base chassis (VLANs, QoS, IGMP, ACLs, routing, etc.).
• Fiber SFP uplink compatibility via the main switch (if combined with SFP modules).
• Increased EMI immunity and rugged design suitable for substations and transportation networks.
--------------------------------------------------------------------
3. TECHNICAL SPECIFICATIONS
Interface Type: 4 × 100FX ports
Fiber Type: Multimode (MM)
Connector Type: LC
Optical Distance: Up to 2 km (MM fiber, typical 850 nm wavelength)
Fiber Size Compatibility: 50/125 µm and 62.5/125 µm multimode fiber
Module Operating Temperature: −40°C to +70°C
Storage Temperature: −40°C to +85°C
Operating Humidity: 5%–95% (non‑condensing)
Compatibility: RGS‑9000 series switch chassis (slots 1–3)
Dimensions: Matches modular slot form factor (inherits chassis dimensions: 440 × 325 × 44 mm overall)
Weight: Part of modular assembly; chassis total weight ranges from 6450 g to 6600 g depending on power version.
Standards Compliance:
• IEC 61850‑3 (Environmental and EMC requirements for substation automation)
• IEEE 1613 (Standard for networking equipment in electric power substations)
• EN61000‑4‑2/3/4/5/6/8/11 (EMC immunity) – supported by overall chassis design
• EN55022 Class A, FCC Part 15 (EMI) – via chassis certification
--------------------------------------------------------------------
4. FUNCTIONALITY
The SWM‑04FX‑MM‑LC functions as a fiber expansion module within the RGS‑9000 managed switch platform. Its primary purpose is to provide reliable, interference‑resilient 100 Mbps fiber links for industrial networks requiring long‑distance communication and immunity to electrical noise.
Use Cases:
• Power substation communication networks (IEC 61850‑3 applications).
• Railway and rolling stock systems requiring high EMI immunity.
• Industrial automation systems requiring reliable fiber backbone.
• Redundant fiber rings using ORing, MRP, MSTP, O‑Chain.
• Hazard‑prone or distance‑critical environments needing fiber links instead of copper Ethernet.
Applications:
• SCADA networks
• Intelligent Electronic Devices (IEDs) interconnection
• High‑availability Ethernet ring systems
• Fiber distribution in robust industrial Ethernet environments
Compatibility:
• Compatible with RGS‑9000, RGS‑P9000, RGS‑PR9000 modular switches
• Works in slots 1–3
• Integrates with all software features of the main chassis (L2/L3 routing, VLAN, redundancy, SNMP, security, QoS, IGMP)
--------------------------------------------------------------------
5. COMPONENTS & ACCESSORIES
Included:
• SWM‑04FX‑MM‑LC module (4‑port multimode LC fiber)
• Documentation (included within switch manual or QIG)
Optional/Related Accessories:
• LC‑LC multimode fiber patch cables
• Multimode fiber spools (50/125 µm or 62.5/125 µm)
• RGS‑9000 chassis modules such as:
– RJ‑45 Gigabit modules (8‑port copper)
– SFP modules (8‑port SFP fiber)
– 10G SFP+ modules (2‑ or 4‑port 10G)
• Redundant power modules for the RGS‑9000 chassis
Connectors:
• LC duplex fiber connectors for each 100FX port
--------------------------------------------------------------------
6. INSTALLATION & SETUP
Installation Requirements:
• RGS‑9000 switch must be powered off prior to module insertion.
• Module inserted into slot 1, 2, or 3 only.
• Ensure dust caps removed only at time of connection; maintain fiber cleanliness.
• Use multimode fiber compatible with 850 nm wavelength.
Installation Procedure:
1. Power down the RGS‑9000 switch.
2. Remove blank panel from the desired slot (1–3).
3. Insert the SWM‑04FX‑MM‑LC module carefully into the slot.
4. Secure with module screws.
5. Connect LC multimode fiber cables.
6. Power on the switch; module automatically initializes.
Configuration:
• Managed entirely through the main switch interface (Web GUI, CLI, SNMP, Open‑Vision utility).
• Ports can be configured for VLANs, redundancy, QoS, speed/duplex status (fixed 100FX‑FD).
• Fiber operational diagnostics available via SFP monitor pages (for modules supporting DDM).
--------------------------------------------------------------------
7. PERFORMANCE & CAPABILITIES
Port Speed: Fixed 100 Mbps full‑duplex (100BASE‑FX)
Link Distance: Up to 2000 meters on multimode fiber
Duplex: Full‑duplex
Error Detection: Frame integrity and FCS checking managed by base switch
Latency: Determined by base switch (RGS‑9000 switching latency approx. 7 µs)
Network Performance:
• Packet Buffer: 32 Mbit (system-level)
• MAC Table: up to 32k entries (system-level)
• Jumbo Frames: up to 9.6 KB (system-level)
• IGMP Snooping: Supported (v2/v3)
• QoS: 8 priority queues
• VLANs: Up to 256 VLANs (RGS‑9000 system)
Redundancy Performance:
• O‑Ring: < 30 ms recovery over 250 devices
• MRP (IEC 62439): rapid media redundancy
• MSTP/RSTP/STP supported
• O‑Chain for multi‑ring integration
Environmental and Electrical Performance:
• Extended temperature operation −40°C to +70°C
• High immunity to EMI and electrical surges (IEC 61850‑3 / IEEE 1613 compliance)
• Suitable for substation electromagnetic zones
Limitations:
• Limited to 100 Mbps (not Gigabit)
• Must use multimode fiber only
• Maximum distance limited to 2 km for MM fiber
--------------------------------------------------------------------
8. STANDARDS & COMPLIANCE
Electrical and EMC:
• IEC 61850‑3 (substation EMC, temperature, vibration, isolation)
• IEEE 1613
• EN61000‑4‑2 (ESD)
• EN61000‑4‑3 (RS)
• EN61000‑4‑4 (EFT)
• EN61000‑4‑5 (Surge)
• EN61000‑4‑6 (CS)
• EN61000‑4‑8
• EN61000‑4‑11
• FCC Part 15, CISPR Class A
Networking:
• IEEE 802.3u 100BASE‑FX
• IEEE 802.3x Flow Control
• IEEE 802.1Q VLAN
• IEEE 802.1p QoS
• IEEE 802.1D/802.1w/802.1s spanning tree
• IEEE 802.1X security
• IEEE 1588v2 (system‑level)
• IGMP v2/v3 (system-level)
Safety:
• Industrial‑grade design, power isolation via chassis
• No user serviceable internal components
• Compliant with ORing industrial safety design standards
--------------------------------------------------------------------
9. ADDITIONAL INFORMATION
Warranty:
• 5‑year manufacturer warranty from ORing Industrial Networking Corp.
• Covers defects in materials and workmanship; excludes misuse or unauthorized modifications.
Support:
• Technical Support Email: support@oring-networking.com
• Website: www.oring-networking.com
• Comprehensive user manuals, firmware, MIB files, and configuration guides available online.
Maintenance:
• Fiber connectors should be kept clean using appropriate fiber cleaning tools.
• Verify LC connectors are free of dust caps and contaminants before use.
• Periodically check fiber optic links for attenuation using diagnostic tools.
• Firmware updates for the base chassis will enhance module functionality.
Updates:
• Module functionality is dependent on chassis firmware.
• Features such as VLAN, redundancy, routing, QoS, SNMP, and diagnostics evolve with updates.
• Recommended to maintain latest firmware for performance and security.
--------------------------------------------------------------------
If you need an expanded technical comparison between this module and other SWM‑series modules (e.g., GF, FX single‑mode, GP+ PoE modules), or a condensed marketing-oriented datasheet, I can generate that as well.
--------------------------------------------------------------------
1. PRODUCT OVERVIEW
Product Name: SWM-04FX-MM-LC
Model: SWM-04FX-MM-LC
Article Number: SWM-04FX-MM-LC
Series: RGS-9000 Series Modular Ethernet Switch System
Manufacturer: ORing Industrial Networking Corp.
The SWM‑04FX‑MM‑LC is a modular 4‑port 100FX fiber Ethernet interface module designed for use with ORing’s industrial RGS‑9000 series (including RGS‑P9000, RGS‑PR9000, and RGS‑9000 variants). This module provides four 100 Mbps FX fiber ports using multimode fiber and LC connectors, supporting transmission distances up to 2 km. The module is engineered for high‑reliability industrial environments such as power substation networks, rolling stock, transportation, and mission‑critical industrial automation applications. It fully complies with IEC 61850‑3 and IEEE 1613, ensuring suitability for harsh electromagnetic and environmental conditions.
The SWM‑04FX‑MM‑LC supports robust operations at extended industrial temperature ranges from −40°C to 70°C and is compatible with ORing’s modular chassis for flexible deployment of fiber and copper interfaces.
--------------------------------------------------------------------
2. KEY FEATURES
• 4‑port 100FX multimode fiber interface module for RGS‑9000 series.
• LC fiber connectors for each 100FX port.
• Supports multimode fiber transmission up to 2 km.
• Compliant with IEC 61850‑3 and IEEE 1613 for power substation/utility environments.
• Designed for harsh industrial temperature ranges (−40°C to +70°C).
• Fully compatible with ORing’s O‑Ring redundancy technology (recovery < 30 ms).
• Hot‑swappable module design (installation with switch powered off).
• Supported in modular slots 1–3 on the RGS‑9000 series chassis.
• Works with Layer‑2/Layer‑3 managed features provided by the base chassis (VLANs, QoS, IGMP, ACLs, routing, etc.).
• Fiber SFP uplink compatibility via the main switch (if combined with SFP modules).
• Increased EMI immunity and rugged design suitable for substations and transportation networks.
--------------------------------------------------------------------
3. TECHNICAL SPECIFICATIONS
Interface Type: 4 × 100FX ports
Fiber Type: Multimode (MM)
Connector Type: LC
Optical Distance: Up to 2 km (MM fiber, typical 850 nm wavelength)
Fiber Size Compatibility: 50/125 µm and 62.5/125 µm multimode fiber
Module Operating Temperature: −40°C to +70°C
Storage Temperature: −40°C to +85°C
Operating Humidity: 5%–95% (non‑condensing)
Compatibility: RGS‑9000 series switch chassis (slots 1–3)
Dimensions: Matches modular slot form factor (inherits chassis dimensions: 440 × 325 × 44 mm overall)
Weight: Part of modular assembly; chassis total weight ranges from 6450 g to 6600 g depending on power version.
Standards Compliance:
• IEC 61850‑3 (Environmental and EMC requirements for substation automation)
• IEEE 1613 (Standard for networking equipment in electric power substations)
• EN61000‑4‑2/3/4/5/6/8/11 (EMC immunity) – supported by overall chassis design
• EN55022 Class A, FCC Part 15 (EMI) – via chassis certification
--------------------------------------------------------------------
4. FUNCTIONALITY
The SWM‑04FX‑MM‑LC functions as a fiber expansion module within the RGS‑9000 managed switch platform. Its primary purpose is to provide reliable, interference‑resilient 100 Mbps fiber links for industrial networks requiring long‑distance communication and immunity to electrical noise.
Use Cases:
• Power substation communication networks (IEC 61850‑3 applications).
• Railway and rolling stock systems requiring high EMI immunity.
• Industrial automation systems requiring reliable fiber backbone.
• Redundant fiber rings using ORing, MRP, MSTP, O‑Chain.
• Hazard‑prone or distance‑critical environments needing fiber links instead of copper Ethernet.
Applications:
• SCADA networks
• Intelligent Electronic Devices (IEDs) interconnection
• High‑availability Ethernet ring systems
• Fiber distribution in robust industrial Ethernet environments
Compatibility:
• Compatible with RGS‑9000, RGS‑P9000, RGS‑PR9000 modular switches
• Works in slots 1–3
• Integrates with all software features of the main chassis (L2/L3 routing, VLAN, redundancy, SNMP, security, QoS, IGMP)
--------------------------------------------------------------------
5. COMPONENTS & ACCESSORIES
Included:
• SWM‑04FX‑MM‑LC module (4‑port multimode LC fiber)
• Documentation (included within switch manual or QIG)
Optional/Related Accessories:
• LC‑LC multimode fiber patch cables
• Multimode fiber spools (50/125 µm or 62.5/125 µm)
• RGS‑9000 chassis modules such as:
– RJ‑45 Gigabit modules (8‑port copper)
– SFP modules (8‑port SFP fiber)
– 10G SFP+ modules (2‑ or 4‑port 10G)
• Redundant power modules for the RGS‑9000 chassis
Connectors:
• LC duplex fiber connectors for each 100FX port
--------------------------------------------------------------------
6. INSTALLATION & SETUP
Installation Requirements:
• RGS‑9000 switch must be powered off prior to module insertion.
• Module inserted into slot 1, 2, or 3 only.
• Ensure dust caps removed only at time of connection; maintain fiber cleanliness.
• Use multimode fiber compatible with 850 nm wavelength.
Installation Procedure:
1. Power down the RGS‑9000 switch.
2. Remove blank panel from the desired slot (1–3).
3. Insert the SWM‑04FX‑MM‑LC module carefully into the slot.
4. Secure with module screws.
5. Connect LC multimode fiber cables.
6. Power on the switch; module automatically initializes.
Configuration:
• Managed entirely through the main switch interface (Web GUI, CLI, SNMP, Open‑Vision utility).
• Ports can be configured for VLANs, redundancy, QoS, speed/duplex status (fixed 100FX‑FD).
• Fiber operational diagnostics available via SFP monitor pages (for modules supporting DDM).
--------------------------------------------------------------------
7. PERFORMANCE & CAPABILITIES
Port Speed: Fixed 100 Mbps full‑duplex (100BASE‑FX)
Link Distance: Up to 2000 meters on multimode fiber
Duplex: Full‑duplex
Error Detection: Frame integrity and FCS checking managed by base switch
Latency: Determined by base switch (RGS‑9000 switching latency approx. 7 µs)
Network Performance:
• Packet Buffer: 32 Mbit (system-level)
• MAC Table: up to 32k entries (system-level)
• Jumbo Frames: up to 9.6 KB (system-level)
• IGMP Snooping: Supported (v2/v3)
• QoS: 8 priority queues
• VLANs: Up to 256 VLANs (RGS‑9000 system)
Redundancy Performance:
• O‑Ring: < 30 ms recovery over 250 devices
• MRP (IEC 62439): rapid media redundancy
• MSTP/RSTP/STP supported
• O‑Chain for multi‑ring integration
Environmental and Electrical Performance:
• Extended temperature operation −40°C to +70°C
• High immunity to EMI and electrical surges (IEC 61850‑3 / IEEE 1613 compliance)
• Suitable for substation electromagnetic zones
Limitations:
• Limited to 100 Mbps (not Gigabit)
• Must use multimode fiber only
• Maximum distance limited to 2 km for MM fiber
--------------------------------------------------------------------
8. STANDARDS & COMPLIANCE
Electrical and EMC:
• IEC 61850‑3 (substation EMC, temperature, vibration, isolation)
• IEEE 1613
• EN61000‑4‑2 (ESD)
• EN61000‑4‑3 (RS)
• EN61000‑4‑4 (EFT)
• EN61000‑4‑5 (Surge)
• EN61000‑4‑6 (CS)
• EN61000‑4‑8
• EN61000‑4‑11
• FCC Part 15, CISPR Class A
Networking:
• IEEE 802.3u 100BASE‑FX
• IEEE 802.3x Flow Control
• IEEE 802.1Q VLAN
• IEEE 802.1p QoS
• IEEE 802.1D/802.1w/802.1s spanning tree
• IEEE 802.1X security
• IEEE 1588v2 (system‑level)
• IGMP v2/v3 (system-level)
Safety:
• Industrial‑grade design, power isolation via chassis
• No user serviceable internal components
• Compliant with ORing industrial safety design standards
--------------------------------------------------------------------
9. ADDITIONAL INFORMATION
Warranty:
• 5‑year manufacturer warranty from ORing Industrial Networking Corp.
• Covers defects in materials and workmanship; excludes misuse or unauthorized modifications.
Support:
• Technical Support Email: support@oring-networking.com
• Website: www.oring-networking.com
• Comprehensive user manuals, firmware, MIB files, and configuration guides available online.
Maintenance:
• Fiber connectors should be kept clean using appropriate fiber cleaning tools.
• Verify LC connectors are free of dust caps and contaminants before use.
• Periodically check fiber optic links for attenuation using diagnostic tools.
• Firmware updates for the base chassis will enhance module functionality.
Updates:
• Module functionality is dependent on chassis firmware.
• Features such as VLAN, redundancy, routing, QoS, SNMP, and diagnostics evolve with updates.
• Recommended to maintain latest firmware for performance and security.
--------------------------------------------------------------------
If you need an expanded technical comparison between this module and other SWM‑series modules (e.g., GF, FX single‑mode, GP+ PoE modules), or a condensed marketing-oriented datasheet, I can generate that as well.
-
DataSheet_RGS-PR9000_Series_V1.0.pdf
PDF Catalog
-
Datasheet_RGS-P9000_SERIES_V1.0.pdf
PDF Catalog
-
Datasheet_RGS-PR9000 Series.pdf
PDF Catalog
- RGS-PR9000-HV-L3 - Managed Layer 3 Switch IEC-61850 rack 4 slots VAC
- RGS-P9000-HV-L2 - Managed Layer 2 Switch IEC-61850 rack 4 slots VAC
