Comprehensive Product Summary – SWM‑04FX‑SS‑ST Fiber SFP Module for RGS‑9000 Series

---

### 1. Product Overview

Product Name: SWM‑04FX‑SS‑ST
Article Number: SWM‑04FX‑SS‑ST
Model Description: 4×100FX SS single‑mode ST connector, 30 km Fiber SFP module, IEC 61850‑3 compliant
Series: RGS‑9000 Series Industrial Managed Ethernet Switch Modules
Manufacturer: ORing Industrial Networking Corp.
Website: [www.oring‑networking.com](http://www.oring-networking.com)
Contact: support@oring‑networking.com | sales@oring‑networking.com
Headquarters: 4F., No. 3, Lane 235, Baociao Rd., Sindian City, Taipei County 23145, Taiwan, R.O.C.

The SWM‑04FX‑SS‑ST is a modular fiber interface card designed for the RGS‑9000 Series industrial managed Ethernet switches. It provides four 100 Mbps fiber ports using single‑mode optical transceivers with ST connectors, supporting transmission distances up to 30 km. The module is fully compliant with IEC 61850‑3 and IEEE 1613 standards for substation and railway applications, ensuring high reliability under harsh environmental conditions. It operates over an extended temperature range of –40 °C to +70 °C, making it suitable for mission‑critical industrial networks.

---

### 2. Key Features

- Four 100 Mbps Fiber Ports: Each port supports 100BASE‑FX single‑mode fiber connections via ST connectors.
- Long‑Distance Transmission: Up to 30 km reach per port using standard single‑mode fiber (1310 nm).
- Industrial‑Grade Design: Compliant with IEC 61850‑3 and IEEE 1613 for power substation and railway environments.
- Extended Temperature Operation: –40 °C to +70 °C continuous operation for outdoor or cabinet‑mounted systems.
- Hot‑Swappable Module: Designed for easy insertion into RGS‑9000 modular slots without system downtime.
- Full Integration with RGS‑9000 Management: Supports all Layer 2/3 managed switch functions, redundancy protocols, and diagnostics.
- Redundant Network Support: Compatible with O‑Ring, O‑Chain, MRP, and MSTP redundancy mechanisms (< 30 ms recovery).
- High Immunity to EMI/EMC: Meets EN61000‑4‑2/3/4/5/6/8/11 for electromagnetic compatibility.
- Rugged Construction: Industrial‑grade components and metal shielding for vibration and shock resistance.
- Plug‑and‑Play Compatibility: Recognized automatically by the RGS‑9000 chassis; no firmware modification required.

---

### 3. Technical Specifications

| Parameter | Specification |
|----------------|------------------|
| Interface Type | 4 × 100BASE‑FX single‑mode fiber ports |
| Connector Type | ST (bayonet‑style) |
| Optical Wavelength | 1310 nm |
| Transmission Distance | Up to 30 km over 9/125 µm single‑mode fiber |
| Optical Power Budget | Typical 14 dB (Tx – 15 dBm max, Rx – 30 dBm min) |
| Fiber Type | Single‑mode (SMF) |
| Slot Compatibility | RGS‑9000 Series modular slots 1–3 |
| Operating Temperature | –40 °C to +70 °C |
| Storage Temperature | –40 °C to +85 °C |
| Relative Humidity | 5 % – 95 %, non‑condensing |
| Power Consumption | < 5 W per module (typical) |
| Dimensions (Module) | Approx. 110 mm × 80 mm × 25 mm (fits standard RGS‑9000 slot) |
| Weight | ~ 0.25 kg |
| Material | Aluminum alloy housing with EMI shielding |
| Compliance | IEC 61850‑3, IEEE 1613, EN61000‑4‑x, FCC Part 15 Class A |
| Cooling | Passive convection via chassis airflow |
| Hot‑Swap Support | Yes, with automatic detection and initialization |

---

### 4. Functionality

The SWM‑04FX‑SS‑ST module expands the RGS‑9000 switch with four fiber interfaces for long‑distance or EMI‑sensitive network segments. Each port operates at 100 Mbps full‑duplex and supports standard Ethernet frame sizes up to 9.6 KB (jumbo frames). The module integrates seamlessly with the switch’s managed features, including VLANs, QoS, redundancy, and security.

Typical Use Cases:
- Power substation automation networks (IEC 61850 process bus).
- Railway and rolling‑stock communication systems.
- Industrial plant backbone interconnections.
- Long‑haul fiber links between control rooms and field devices.
- Redundant ring or chain topologies requiring fiber isolation.

Compatibility:
- Fully compatible with RGS‑9000, RGS‑P9000, and RGS‑PR9000 chassis.
- Supports interoperability with other ORing fiber modules (e.g., SWM‑04GF‑MM, SWM‑04FX‑MM).
- Works with standard single‑mode fiber SFP transceivers and ST‑terminated cables.

---

### 5. Components & Accessories

Included Items:
- One SWM‑04FX‑SS‑ST module (factory‑tested).
- Protective dust caps for all ST connectors.
- Installation guide and safety instructions.

Optional Accessories:
- Single‑mode fiber patch cords (ST/ST or ST/SC).
- Fiber cleaning kit.
- Spare SFP optical transceivers (if applicable).
- RGS‑9000 rack‑mount chassis and power modules.

Connectors:
- Four ST optical connectors (Tx/Rx pairs).
- Internal edge connector for RGS‑9000 backplane interface.

---

### 6. Installation & Setup

Requirements:
- RGS‑9000 Series chassis with available module slot (1–3).
- Power off the switch before module insertion.
- Observe ESD precautions and fiber‑handling safety.

Installation Steps:
1. Power down the RGS‑9000 switch.
2. Remove the blank panel from the desired slot.
3. Align the SWM‑04FX‑SS‑ST module with the guide rails and insert firmly until seated.
4. Secure with retaining screws.
5. Connect single‑mode fiber cables to each ST port (Tx ↔ Rx cross‑connection).
6. Power on the switch; the module is automatically detected.
7. Verify link LEDs and configure ports via Web, CLI, or Open‑Vision utility.

Configuration:
- Access the switch management interface (default IP 192.168.10.1).
- Navigate to Port Settings → SFP Module to view link status.
- Assign VLANs, redundancy roles, or QoS parameters as required.

Mounting Options:
- The module is internally mounted; the chassis supports 19‑inch rack installation (440 × 325 × 44 mm).

---

### 7. Performance & Capabilities

- Data Rate: 100 Mbps full‑duplex per port.
- Aggregate Bandwidth: 400 Mbps per module.
- Switching Latency: < 7 µs (store‑and‑forward).
- Jumbo Frame Support: Up to 9.6 KB.
- Redundancy Recovery: < 30 ms over 250 nodes (O‑Ring).
- QoS: IEEE 802.1p priority queuing (8 queues).
- VLAN Support: IEEE 802.1Q, up to 256 VLANs.
- Security: 802.1x authentication, MAC filtering, ACLs, DoS/DDoS prevention.
- Diagnostics: SFP monitoring (DDM), cable diagnostics, port statistics, and fault alarms.
- Reliability: MTBF > 200,000 hours under industrial conditions.

Limitations:
- Operates at 100 Mbps only (not 1 Gbps).
- Requires single‑mode fiber; not compatible with multimode cabling.
- Must be used within RGS‑9000 chassis; not a standalone device.

---

### 8. Standards & Compliance

Electrical and Environmental Standards:
- IEC 61850‑3: Communication networks and systems for power utility automation.
- IEEE 1613: Environmental and testing requirements for communications networking devices in electric power substations.
- EN61000‑4‑2/3/4/5/6/8/11: EMC immunity standards (ESD, RS, EFT, Surge, CS, magnetic field, voltage dips).
- EN55022 Class A / FCC Part 15 Class A: EMI emission compliance.
- EN50155 / EN50121‑3‑2 / EN50121‑4: Railway and rolling‑stock electromagnetic compatibility.
- RoHS 2.0 / WEEE: Environmentally compliant manufacturing.

Network Protocol Standards Supported via RGS‑9000 Integration:
- IEEE 802.3 (10/100/1000 Ethernet)
- IEEE 802.1Q (VLAN)
- IEEE 802.1p (QoS)
- IEEE 802.1w/s (RSTP/MSTP)
- IEEE 802.1x (Authentication)
- IEEE 802.3ad (LACP)
- IEEE 1588v2 (PTP time synchronization)
- IEC 62439‑2 (MRP redundancy)
- Modbus TCP, SNMP v1/v2c/v3, HTTPS, SSH

---

### 9. Additional Information

Warranty:
- 5‑year limited warranty covering defects in materials and workmanship from the invoice date.
- Excludes damage due to misuse, improper installation, or unauthorized modification.

Support & Maintenance:
- Firmware updates available via ORing’s web portal.
- Technical support through email or authorized distributors.
- Configuration backup and restore supported via Web or CLI.

Maintenance Recommendations:
- Periodically inspect fiber connectors for dust or contamination.
- Use proper cleaning tools before reconnection.
- Keep unused ports capped to prevent optical degradation.
- Verify firmware compatibility when upgrading RGS‑9000 chassis.

Software Integration:
- Managed through Open‑Vision centralized management suite.
- Supports Web GUI, Telnet, SSH, and RS‑232 console configuration.
- SNMP v3 and RMON for remote monitoring and event logging.

Safety & Handling:
- Observe laser safety (Class 1 LED source).
- Avoid direct eye exposure to fiber transmitters.
- Maintain proper grounding and ESD protection during installation.

---

### Summary

The SWM‑04FX‑SS‑ST is a robust, industrial‑grade fiber expansion module engineered for ORing’s RGS‑9000 Series modular managed switches. It delivers four independent 100BASE‑FX single‑mode fiber interfaces with ST connectors, enabling secure, long‑distance Ethernet connectivity up to 30 km. Designed for IEC 61850‑3 and IEEE 1613 compliance, it withstands extreme temperatures, vibration, and electromagnetic interference typical of power substations and railway systems.

When integrated into an RGS‑9000 chassis, the module inherits the platform’s advanced Layer 2/3 management, redundancy, and security capabilities, including O‑Ring fast recovery, VLAN segmentation, QoS prioritization, and SNMP‑based monitoring. Its hot‑swappable design simplifies maintenance and scalability, while the extended –40 °C to +70 °C operating range ensures continuous service in demanding industrial environments.

With a 5‑year warranty, comprehensive standards compliance, and full interoperability within the ORing ecosystem, the SWM‑04FX‑SS‑ST provides a reliable, high‑performance fiber networking solution for mission‑critical automation and transportation infrastructures.