Comprehensive Product Summary – ORing SWM‑04GF‑SS‑SC 4‑Port 1000FX Single‑Mode Fiber Module

---

### 1. Product Overview

Product Name: 4‑Port 1000FX Fiber Module (Single Mode)
Model Number: SWM‑04GF‑SS‑SC
Article Number: SWM‑04GF‑SS‑SC
Series: RGS‑9000 Series – Industrial Managed Ethernet Switch Platform
Manufacturer: ORing Industrial Networking Corp.
Website: [www.oring‑networking.com](http://www.oring-networking.com)
Support Contact: support@oring‑networking.com
Sales Contact: sales@oring‑networking.com

The SWM‑04GF‑SS‑SC is a modular 4‑port Gigabit fiber expansion module designed for integration with ORing’s RGS‑9000 Series industrial managed Ethernet switches. It provides four 1000Base‑FX single‑mode fiber interfaces using SC connectors, enabling long‑distance, high‑reliability optical communication in harsh industrial environments such as power substations, transportation systems, and railway networks.

---

### 2. Key Features

- High‑Performance Fiber Connectivity:
Four independent 1000Base‑FX single‑mode fiber ports supporting full‑duplex Gigabit Ethernet transmission over long distances.

- Industrial‑Grade Design:
Engineered for use in IEC 61850‑3 and IEEE 1613 compliant environments, ensuring electromagnetic immunity and reliability in power automation and railway applications.

- Modular Integration:
Designed as a plug‑in module for the RGS‑9000 Series chassis, allowing flexible configuration of up to three Gigabit modules and one 10 G SFP+ module per switch.

- SC Optical Interface:
Equipped with four SC‑type connectors for single‑mode fiber, simplifying field installation and maintenance.

- Redundant Network Support:
Fully compatible with ORing’s proprietary O‑Ring and O‑Chain redundancy technologies, providing recovery times under 30 ms across up to 250 nodes.

- Wide Temperature Operation:
Supports extended industrial temperature ranges from –40 °C to +85 °C (when no 10 G module is installed) or –20 °C to +60 °C (with 10 G module).

- Seamless Management Integration:
Managed through the RGS‑9000’s web interface, CLI, SNMP, or ORing’s Open‑Vision centralized management software.

- High Reliability and Long‑Distance Transmission:
Single‑mode optical design supports transmission distances up to 10 km or more, depending on fiber type and transceiver characteristics.

---

### 3. Technical Specifications

| Parameter | Specification |
|----------------|------------------|
| Module Type | 4‑Port Gigabit Fiber Expansion Module |
| Model | SWM‑04GF‑SS‑SC |
| Interface Type | 4 × 1000Base‑FX (Single‑Mode) |
| Connector Type | SC |
| Optical Wavelength | 1310 nm (typical for single‑mode) |
| Transmission Distance | Up to 10 km (depending on fiber and transceiver) |
| Supported Fiber | 9/125 µm single‑mode optical fiber |
| Port Speed | 1 Gbps full‑duplex per port |
| Module Slots Supported | Fits RGS‑9000 Series modular slots 1–3 |
| Dimensions (module) | Matches RGS‑9000 slot form factor (approx. 110 × 25 × 90 mm) |
| Weight | Approx. 0.3 kg (module only) |
| Material | Industrial‑grade metal enclosure, EMI‑shielded |
| Operating Temperature | –40 °C to +85 °C (without 10 G module) / –20 °C to +60 °C (with 10 G module) |
| Storage Temperature | –40 °C to +85 °C |
| Humidity | 5 % – 95 % RH, non‑condensing |
| Compliance | IEC 61850‑3, IEEE 1613, EN50155, EN61000‑4‑2/3/4/5/6/8/11 |
| Warranty | 5 years (standard ORing industrial warranty) |

---

### 4. Functionality

The SWM‑04GF‑SS‑SC module functions as a Gigabit fiber interface expansion for the RGS‑9000 Series managed switches. When installed, it provides four dedicated single‑mode optical uplinks or inter‑switch connections. Each port operates independently at 1 Gbps full‑duplex, supporting Ethernet frames up to 9.6 KB jumbo size.

Typical Use Cases:
- Backbone fiber links between substations or control centers.
- Long‑distance connections in railway signaling networks.
- Redundant ring or chain topologies using ORing’s O‑Ring/O‑Chain protocols.
- Integration with SC‑terminated single‑mode fiber infrastructure.
- High‑EMI environments requiring optical isolation.

Compatibility:
- Fully compatible with RGS‑9000, RGS‑P9000, and RGS‑PR9000 chassis.
- Works with other ORing modules such as RJ‑45 copper modules, SFP modules, and 10 G SFP+ modules.
- Managed through the same software and firmware environment as the host switch.

---

### 5. Components & Accessories

Included Items:
- SWM‑04GF‑SS‑SC module unit
- Protective dust caps for SC connectors
- Mounting screws for slot installation
- Quick installation guide (included with RGS‑9000 package)

Optional Accessories:
- Single‑mode fiber patch cords (SC‑SC or SC‑LC)
- Fiber management trays or patch panels
- ORing Open‑Vision network management software
- Redundant power modules for RGS‑9000 chassis

Connectors:
- 4 × SC optical connectors (single‑mode)
- Internal backplane connector for data and power interface to RGS‑9000 mainboard

---

### 6. Installation & Setup

Installation Requirements:
- Compatible RGS‑9000 Series chassis with available slot 1–3.
- Power off the switch before inserting or removing modules.
- Observe ESD protection when handling optical components.

Installation Steps:
1. Power down the RGS‑9000 switch.
2. Remove the blank panel from the desired slot (1–3).
3. Align the SWM‑04GF‑SS‑SC module with the slot guide rails.
4. Insert firmly until the backplane connector seats completely.
5. Secure the module with the provided screws.
6. Power on the switch; the system automatically detects the module.
7. Verify port status via front‑panel LEDs or web interface.

Configuration:
- Access the switch via web browser (default IP 192.168.10.1, user admin/admin).
- Navigate to Port Settings → Fiber Ports to configure speed, duplex, VLAN, and redundancy parameters.
- Integrate ports into O‑Ring, MRP, or MSTP topologies as required.
- Use Open‑Vision or SNMP for centralized monitoring.

---

### 7. Performance & Capabilities

- Bandwidth: 1 Gbps per port, 4 Gbps aggregate full‑duplex throughput.
- Switching Fabric (with RGS‑9000): 128 Gbps total.
- Latency: < 7 µs store‑and‑forward switching.
- Jumbo Frame Support: up to 9.6 KB.
- MAC Table Capacity (system): up to 32 K entries.
- Packet Buffer: 32 Mbit shared memory.
- QoS: IEEE 802.1p priority queues (8 levels).
- Redundancy: O‑Ring (< 30 ms recovery), O‑Chain, MRP (IEC 62439‑2), MSTP/RSTP/STP.
- Security: 802.1x, RADIUS/TACACS+, ACL, device binding, DoS/DDoS prevention.
- Management: Web GUI, Telnet/CLI, SNMP v1/v2c/v3, Modbus TCP, HTTPS/SSH.
- Diagnostics: SFP/DDM monitoring, cable diagnostics, port statistics, system log, temperature monitoring.

Limitations:
- Operates only within RGS‑9000 modular chassis; not a standalone device.
- Fixed SC single‑mode interface (no multi‑mode support).
- Requires power and management from host switch.

---

### 8. Standards & Compliance

The SWM‑04GF‑SS‑SC module and its host RGS‑9000 system comply with a wide range of industrial and communication standards:

Ethernet Standards:
- IEEE 802.3 (10Base‑T)
- IEEE 802.3u (100Base‑TX/FX)
- IEEE 802.3ab (1000Base‑T)
- IEEE 802.3z (1000Base‑X)
- IEEE 802.3x (Flow Control)
- IEEE 802.3ad (Link Aggregation)
- IEEE 802.1p (Class of Service)
- IEEE 802.1Q (VLAN Tagging)
- IEEE 802.1w/s (RSTP/MSTP)
- IEEE 802.1x (Network Access Control)
- IEEE 802.1AB (LLDP)
- IEEE 1588v2 (Precision Time Protocol)

Industrial & Environmental Compliance:
- IEC 61850‑3 – Power Substation Communication Networks
- IEEE 1613 – Environmental and Testing Requirements for Networking Equipment in Electric Power Substations
- EN50155 / EN50121‑3‑2 / EN50121‑4 – Railway and Rolling Stock EMC
- EN61000‑4‑2/3/4/5/6/8/11 – EMC Immunity (ESD, RS, EFT, Surge, CS, Magnetic Field, Voltage Dips)
- FCC Part 15 Class A / CISPR 22 Class A – EMI Emission Standards
- EN60950‑1 – Safety of Information Technology Equipment

Environmental Ratings:
- Operating temperature: –40 °C to +85 °C
- Humidity: 5 % – 95 % RH non‑condensing
- Shock: IEC 60068‑2‑27
- Vibration: IEC 60068‑2‑6
- Free Fall: IEC 60068‑2‑32

---

### 9. Additional Information

Warranty:
Standard 5‑year limited warranty covering defects in materials and workmanship. Warranty excludes damage from misuse, improper installation, or unauthorized modification.

Maintenance:
- Periodically inspect fiber connectors and clean with appropriate optical cleaning tools.
- Keep dust caps on unused ports.
- Ensure adequate ventilation in rack installations.
- Firmware updates available via web interface or CLI (TFTP/HTTP upload).

Support & Updates:
- Technical documentation, firmware, and management utilities are available at [www.oring‑networking.com](http://www.oring-networking.com).
- Technical support via email: support@oring‑networking.com.
- Product registration recommended for warranty validation and update notifications.

Safety & Handling:
- Disconnect power before module installation or removal.
- Observe ESD precautions when handling optical components.
- Avoid looking directly into fiber connectors when the port is active.

---

### Summary

The ORing SWM‑04GF‑SS‑SC is a robust, high‑performance 4‑port Gigabit single‑mode fiber module purpose‑built for the RGS‑9000 Series industrial managed Ethernet switches. It extends the switch’s optical networking capabilities, enabling long‑distance, interference‑immune communication in mission‑critical environments such as power substations, transportation systems, and industrial automation networks.

With compliance to IEC 61850‑3 and IEEE 1613, redundant ring support, and wide‑temperature operation, the module ensures continuous, reliable service under extreme conditions. Its SC single‑mode interfaces deliver stable Gigabit throughput over extended distances, while integration with ORing’s advanced management and redundancy frameworks provides a comprehensive, scalable solution for modern industrial Ethernet infrastructures.