LOOKING FOR THE RIGHT
INDUSTRIAL SOLUTION?
Discover embedded, communication and automation solutions tailored to your application.
W-M1B113
6*RTD Pt100 AD RS485 Modbus module
210,00 EUR
including VAT 249.90 EUR
- Multi‑Sensor RTD Support: Compatible with Pt100 (IEC 0.00385 / JIS 0.00392), Pt1000, Cu100, Cu1000, Cu50, Ni100, Ni120, Ni507.5, Ni604, and BALCO 500 sensors.
- Six Independent Channels: Each channel uses a discrete A/D converter for improved accuracy and channel‑to‑channel isolation.
- High Electrical Isolation: 3 kV DC isolation between power, communication, and I/O circuits.
- Overvoltage Protection: ±55 V input protection and 240 V channel‑to‑channel dielectric protection.
- Disconnection Detection: Automatic sensor break/failure detection for safety‑critical applications.
- Hot‑Swap and Auto‑Configuration: Modules can be replaced without rewiring; configuration is restored via removable EEPROM.
- Programmable Power‑On and Safety Values: Ensures safe system states during startup or communication loss.
- Wide Power Input Range: Operates from +10 V DC to +60 V DC (ripple ≤ 5 V p‑p).
- Compact, Space‑Saving Design: 47.2 mm slim vertical housing for dense DIN‑rail installations.
- Easy Node Addressing: Two rotary switches for Modbus node address (1–247).
- LED Diagnostics: Three front‑panel LEDs indicate power, communication, and system status.
- Industrial‑Grade Reliability: Built‑in hardware and system watchdogs for self‑recovery from communication or host failures.
- Wide Operating Temperature: −25 °C to +70 °C operation, −30 °C to +75 °C storage.
- Modbus/RTU Communication: Baud rates from 1200 bps to 115.2 kbps; maximum cable length 1.2 km.
- Low Power Consumption: 1.6 W @ 24 V DC typical.
- 5‑Year Warranty: Long‑term reliability assurance for industrial deployments.
- Six Independent Channels: Each channel uses a discrete A/D converter for improved accuracy and channel‑to‑channel isolation.
- High Electrical Isolation: 3 kV DC isolation between power, communication, and I/O circuits.
- Overvoltage Protection: ±55 V input protection and 240 V channel‑to‑channel dielectric protection.
- Disconnection Detection: Automatic sensor break/failure detection for safety‑critical applications.
- Hot‑Swap and Auto‑Configuration: Modules can be replaced without rewiring; configuration is restored via removable EEPROM.
- Programmable Power‑On and Safety Values: Ensures safe system states during startup or communication loss.
- Wide Power Input Range: Operates from +10 V DC to +60 V DC (ripple ≤ 5 V p‑p).
- Compact, Space‑Saving Design: 47.2 mm slim vertical housing for dense DIN‑rail installations.
- Easy Node Addressing: Two rotary switches for Modbus node address (1–247).
- LED Diagnostics: Three front‑panel LEDs indicate power, communication, and system status.
- Industrial‑Grade Reliability: Built‑in hardware and system watchdogs for self‑recovery from communication or host failures.
- Wide Operating Temperature: −25 °C to +70 °C operation, −30 °C to +75 °C storage.
- Modbus/RTU Communication: Baud rates from 1200 bps to 115.2 kbps; maximum cable length 1.2 km.
- Low Power Consumption: 1.6 W @ 24 V DC typical.
- 5‑Year Warranty: Long‑term reliability assurance for industrial deployments.
Comprehensive Product Summary – Advanio W‑M1B113 6‑Channel RTD Pt100 AD RS‑485 Modbus Module
### 1. Product Overview
Product Name: 6×RTD Pt100 AD RS‑485 Modbus Module
Model Number: W‑M1B113
Series: Wolf Series RS‑485 Remote I/O Modules
Article Number: W‑M1B113
Manufacturer: Advanio Technology Co., Ltd.
The W‑M1B113 is a high‑precision, six‑channel resistance temperature detector (RTD) analog input module designed for industrial automation and remote data acquisition. It belongs to Advanio’s Wolf Series of RS‑485 remote I/O modules, which are engineered for rugged industrial environments and optimized for Modbus/RTU communication. The module supports multiple RTD sensor types, provides 16‑bit resolution, and features 3 kV isolation, hot‑swap capability, and EEPROM‑based configuration backup.
Advanio Technology Co., Ltd., founded by a team of IoT and automation experts, specializes in advanced I/O and data acquisition technologies for Industry 4.0 and smart factory applications. The Wolf Series represents Advanio’s modular, space‑saving, and field‑serviceable approach to distributed I/O systems.
### 2. Key Features
- Multi‑Sensor RTD Support: Compatible with Pt100 (IEC 0.00385 / JIS 0.00392), Pt1000, Cu100, Cu1000, Cu50, Ni100, Ni120, Ni507.5, Ni604, and BALCO 500 sensors.
- Six Independent Channels: Each channel uses a discrete A/D converter for improved accuracy and channel‑to‑channel isolation.
- High Electrical Isolation: 3 kV DC isolation between power, communication, and I/O circuits.
- Overvoltage Protection: ±55 V input protection and 240 V channel‑to‑channel dielectric protection.
- Disconnection Detection: Automatic sensor break/failure detection for safety‑critical applications.
- Hot‑Swap and Auto‑Configuration: Modules can be replaced without rewiring; configuration is restored via removable EEPROM.
- Programmable Power‑On and Safety Values: Ensures safe system states during startup or communication loss.
- Wide Power Input Range: Operates from +10 V DC to +60 V DC (ripple ≤ 5 V p‑p).
- Compact, Space‑Saving Design: 47.2 mm slim vertical housing for dense DIN‑rail installations.
- Easy Node Addressing: Two rotary switches for Modbus node address (1–247).
- LED Diagnostics: Three front‑panel LEDs indicate power, communication, and system status.
- Industrial‑Grade Reliability: Built‑in hardware and system watchdogs for self‑recovery from communication or host failures.
- Wide Operating Temperature: −25 °C to +70 °C operation, −30 °C to +75 °C storage.
- Modbus/RTU Communication: Baud rates from 1200 bps to 115.2 kbps; maximum cable length 1.2 km.
- Low Power Consumption: 1.6 W @ 24 V DC typical.
- 5‑Year Warranty: Long‑term reliability assurance for industrial deployments.
### 3. Technical Specifications
General Parameters
- Power Input: +10 V DC to +60 V DC (reverse polarity protected)
- Power Consumption: 1.6 W @ 24 V DC
- Isolation Protection: 3000 V DC between power, communication, and I/O
- Watchdog Timers:
- Module watchdog (hardware, 1.6 s fixed)
- System watchdog (software, programmable timeout)
- Connector Type: Plug‑in terminal block, 16–30 AWG wire
- Operating Temperature: −25 °C to +70 °C
- Storage Temperature: −30 °C to +75 °C
- Humidity: 5 % to 95 % RH (non‑condensing)
- Interface: RS‑485, 2‑wire half‑duplex
- Protocol: Modbus/RTU
- Communication Speed: 1200 bps – 115.2 kbps
- Communication Distance: Up to 1.2 km (4000 ft)
- Dimensions: 47.2 mm (W) × 115.2 mm (H) × 130.2 mm (D)
- Weight: Approx. 126.7 g (typical module)
- Housing Material: Industrial‑grade flame‑retardant plastic
Analog Input Section
- Channels: 6 independent RTD input channels
- Sensor Types and Ranges:
- Pt100 (IEC 0.00385): −200 °C to +600 °C
- Pt100 (JIS 0.00392): −200 °C to +600 °C
- Pt1000 (IEC 0.00385): −200 °C to +600 °C
- Cu100 (α = 0.00421): −20 °C to +150 °C
- Cu1000 (α = 0.00421): −20 °C to +150 °C
- Cu50: 0 °C to +200 °C
- Ni100 (α = 0.00618): −60 °C to +180 °C
- Ni120 (α = 0.00672): −80 °C to +260 °C
- Ni507.5 (α = 0.00520): −80 °C to +260 °C
- Ni604 (α = 0.00518): −200 °C to +200 °C
- BALCO 500: −40 °C to +150 °C
- Sampling Rate: 12 samples per second (total)
- Resolution: 16 bits
- Accuracy: ± 0.1 % FSR
- Span Drift: ± 25 ppm / °C
- Zero Drift: ± 6 µV / °C
- Overvoltage Protection: ± 55 V
- Channel Configuration: Independent per channel
- Disconnection Detection: Supported on all channels
### 4. Functionality
The W‑M1B113 functions as a remote analog input module for temperature measurement using RTD sensors. Each of its six channels converts resistance values into digital temperature data via dedicated 16‑bit A/D converters. The module communicates with a host controller (PLC, PAC, or PC) over an RS‑485 network using the Modbus/RTU protocol.
Typical Use Cases and Applications
- Industrial process temperature monitoring and control
- Energy management and environmental monitoring
- Building automation and HVAC systems
- Laboratory instrumentation and test benches
- Supervisory control and data acquisition (SCADA) systems
- Smart factory and Industry 4.0 data acquisition nodes
Compatibility
- Works with Modbus‑compliant controllers, PLCs, and SCADA software
- Integrates with Advanio’s Wolf Series digital and analog I/O modules
- Compatible with Advanio RS‑232/RS‑485 and USB/RS‑485 converters
### 5. Components & Accessories
Included Items
- W‑M1B113 module
- Plug‑in terminal block (signal connector)
- Detachable DIN‑rail mounting base
- Plastic grounding tab and buckle
- Quick start guide
Optional Accessories
- RS‑232 ↔ RS‑485 isolated converter (G‑M1E001)
- USB ↔ RS‑485 converter (G‑M1A001)
- RS‑485 ↔ RS‑485 repeater (G‑M1F001)
- Replacement EEPROM for configuration backup
Connectors
- Front‑mounted terminal blocks for easy wiring and maintenance
- RS‑485 communication port (D+, D−)
- Power input terminals (+VS, GND, FG)
### 6. Installation & Setup
Mounting Options
- DIN‑Rail Mounting: Standard 35 mm DIN‑rail with detachable base; modules can be docked side‑by‑side using 14‑pin connector arrays for power and communication bus continuity.
- Wall Mounting: Fixed seat can be screwed directly to a panel or wall.
- Grounding: Frame ground via aluminum DIN‑rail or dedicated grounding terminal; plastic isolation tabs available for noisy environments.
Power Supply
- DC 10 – 60 V input; ripple ≤ 5 V p‑p
- Parallel power distribution through DIN‑rail bus (max 10 modules / 30 W per rail)
Communication Setup
- RS‑485 2‑wire half‑duplex network
- Modbus node address set via two rotary switches (1–247)
- Default communication: 9600 bps, N, 8, 1
- Baud rate configurable (1200 – 115.2 kbps)
- Max 32 modules per segment; repeaters extend up to 247 nodes
Indicators
- Power LED: Power and system ready
- System LED: Module status and watchdog indication
- Communication LED: Data exchange and timeout status
Configuration
- Parameters stored in removable EEPROM; transferable between identical modules
- Factory reset via INIT button (press ≥ 3 s)
- Configuration utility available for Windows via RS‑485 connection
### 7. Performance & Capabilities
- Measurement Precision: ± 0.1 % FSR with 16‑bit resolution
- Sampling Throughput: 12 samples per second (total across 6 channels)
- Input Protection: ± 55 V overvoltage; 240 V channel‑to‑channel isolation
- Electrical Isolation: 3 kV DC between I/O, power, and communication
- Noise Immunity: EMI/EMS‑tested for industrial environments
- Reliability: Hardware and software watchdogs ensure automatic recovery from transient faults
- Hot‑Swap Capability: Modules can be replaced live without system shutdown
- EEPROM Backup: Non‑volatile storage of configuration and calibration data
- Safety Behavior: Programmable power‑on and safe‑state outputs prevent unintended actuator operation
Limitations
- Total sampling rate shared across channels (12 samples/s)
- Designed for RTD sensors only (no thermocouple or voltage input)
- Requires proper grounding and shielding for optimal noise immunity
### 8. Standards & Compliance
- Communication Standard: RS‑485 (Modbus/RTU)
- Isolation Standard: 3000 V DC isolation barrier
- EMC Compliance: Tested for EMI and EMS per industrial EMC standards
- Regulatory Compliance:
- CE (EMC Directive compliant when installed in CE‑certified chassis)
- FCC Part 15 Class A device (industrial use)
- Environmental Compliance: RoHS‑compliant materials
- Safety: Designed for continuous operation in harsh industrial environments
### 9. Additional Information
Warranty & Service
- Warranty Period: 5 years from date of purchase
- Coverage: Free repair or replacement for manufacturing defects; excludes misuse, improper installation, or unauthorized modification
- RMA Procedure: Contact dealer for RMA number; include proof of purchase and fault description
- Out‑of‑Warranty Service: Repair or replacement at nominal cost
Maintenance
- Periodic inspection of wiring and grounding recommended
- Firmware and configuration updates via Advanio utility software
- EEPROM replacement possible without recalibration
Technical Support
- Email: service@advanio.com.tw
- Website: [www.advanio.com.tw](http://www.advanio.com.tw)
- Support Response: Within 2 working days
- Information Required: Model number, serial number, firmware version, host configuration, and error details
Manufacturer
Advanio Technology Co., Ltd.
Specialists in industrial I/O, embedded systems, and IoT connectivity solutions for smart manufacturing and automation.
### Summary
The Advanio W‑M1B113 is a compact, high‑accuracy, six‑channel RTD input module engineered for industrial temperature measurement and remote data acquisition. It supports a wide range of RTD sensor types, provides 16‑bit resolution, and communicates via RS‑485 (Modbus/RTU). With 3 kV isolation, ±55 V input protection, and a wide 10–60 V DC power range, it is ideal for harsh industrial environments. The module’s hot‑swap design, EEPROM‑based configuration backup, and programmable safety states simplify maintenance and ensure operational reliability. Certified for EMC and FCC Part 15 compliance, the W‑M1B113 delivers robust performance for Industry 4.0 applications requiring precise, distributed temperature monitoring.
### 1. Product Overview
Product Name: 6×RTD Pt100 AD RS‑485 Modbus Module
Model Number: W‑M1B113
Series: Wolf Series RS‑485 Remote I/O Modules
Article Number: W‑M1B113
Manufacturer: Advanio Technology Co., Ltd.
The W‑M1B113 is a high‑precision, six‑channel resistance temperature detector (RTD) analog input module designed for industrial automation and remote data acquisition. It belongs to Advanio’s Wolf Series of RS‑485 remote I/O modules, which are engineered for rugged industrial environments and optimized for Modbus/RTU communication. The module supports multiple RTD sensor types, provides 16‑bit resolution, and features 3 kV isolation, hot‑swap capability, and EEPROM‑based configuration backup.
Advanio Technology Co., Ltd., founded by a team of IoT and automation experts, specializes in advanced I/O and data acquisition technologies for Industry 4.0 and smart factory applications. The Wolf Series represents Advanio’s modular, space‑saving, and field‑serviceable approach to distributed I/O systems.
### 2. Key Features
- Multi‑Sensor RTD Support: Compatible with Pt100 (IEC 0.00385 / JIS 0.00392), Pt1000, Cu100, Cu1000, Cu50, Ni100, Ni120, Ni507.5, Ni604, and BALCO 500 sensors.
- Six Independent Channels: Each channel uses a discrete A/D converter for improved accuracy and channel‑to‑channel isolation.
- High Electrical Isolation: 3 kV DC isolation between power, communication, and I/O circuits.
- Overvoltage Protection: ±55 V input protection and 240 V channel‑to‑channel dielectric protection.
- Disconnection Detection: Automatic sensor break/failure detection for safety‑critical applications.
- Hot‑Swap and Auto‑Configuration: Modules can be replaced without rewiring; configuration is restored via removable EEPROM.
- Programmable Power‑On and Safety Values: Ensures safe system states during startup or communication loss.
- Wide Power Input Range: Operates from +10 V DC to +60 V DC (ripple ≤ 5 V p‑p).
- Compact, Space‑Saving Design: 47.2 mm slim vertical housing for dense DIN‑rail installations.
- Easy Node Addressing: Two rotary switches for Modbus node address (1–247).
- LED Diagnostics: Three front‑panel LEDs indicate power, communication, and system status.
- Industrial‑Grade Reliability: Built‑in hardware and system watchdogs for self‑recovery from communication or host failures.
- Wide Operating Temperature: −25 °C to +70 °C operation, −30 °C to +75 °C storage.
- Modbus/RTU Communication: Baud rates from 1200 bps to 115.2 kbps; maximum cable length 1.2 km.
- Low Power Consumption: 1.6 W @ 24 V DC typical.
- 5‑Year Warranty: Long‑term reliability assurance for industrial deployments.
### 3. Technical Specifications
General Parameters
- Power Input: +10 V DC to +60 V DC (reverse polarity protected)
- Power Consumption: 1.6 W @ 24 V DC
- Isolation Protection: 3000 V DC between power, communication, and I/O
- Watchdog Timers:
- Module watchdog (hardware, 1.6 s fixed)
- System watchdog (software, programmable timeout)
- Connector Type: Plug‑in terminal block, 16–30 AWG wire
- Operating Temperature: −25 °C to +70 °C
- Storage Temperature: −30 °C to +75 °C
- Humidity: 5 % to 95 % RH (non‑condensing)
- Interface: RS‑485, 2‑wire half‑duplex
- Protocol: Modbus/RTU
- Communication Speed: 1200 bps – 115.2 kbps
- Communication Distance: Up to 1.2 km (4000 ft)
- Dimensions: 47.2 mm (W) × 115.2 mm (H) × 130.2 mm (D)
- Weight: Approx. 126.7 g (typical module)
- Housing Material: Industrial‑grade flame‑retardant plastic
Analog Input Section
- Channels: 6 independent RTD input channels
- Sensor Types and Ranges:
- Pt100 (IEC 0.00385): −200 °C to +600 °C
- Pt100 (JIS 0.00392): −200 °C to +600 °C
- Pt1000 (IEC 0.00385): −200 °C to +600 °C
- Cu100 (α = 0.00421): −20 °C to +150 °C
- Cu1000 (α = 0.00421): −20 °C to +150 °C
- Cu50: 0 °C to +200 °C
- Ni100 (α = 0.00618): −60 °C to +180 °C
- Ni120 (α = 0.00672): −80 °C to +260 °C
- Ni507.5 (α = 0.00520): −80 °C to +260 °C
- Ni604 (α = 0.00518): −200 °C to +200 °C
- BALCO 500: −40 °C to +150 °C
- Sampling Rate: 12 samples per second (total)
- Resolution: 16 bits
- Accuracy: ± 0.1 % FSR
- Span Drift: ± 25 ppm / °C
- Zero Drift: ± 6 µV / °C
- Overvoltage Protection: ± 55 V
- Channel Configuration: Independent per channel
- Disconnection Detection: Supported on all channels
### 4. Functionality
The W‑M1B113 functions as a remote analog input module for temperature measurement using RTD sensors. Each of its six channels converts resistance values into digital temperature data via dedicated 16‑bit A/D converters. The module communicates with a host controller (PLC, PAC, or PC) over an RS‑485 network using the Modbus/RTU protocol.
Typical Use Cases and Applications
- Industrial process temperature monitoring and control
- Energy management and environmental monitoring
- Building automation and HVAC systems
- Laboratory instrumentation and test benches
- Supervisory control and data acquisition (SCADA) systems
- Smart factory and Industry 4.0 data acquisition nodes
Compatibility
- Works with Modbus‑compliant controllers, PLCs, and SCADA software
- Integrates with Advanio’s Wolf Series digital and analog I/O modules
- Compatible with Advanio RS‑232/RS‑485 and USB/RS‑485 converters
### 5. Components & Accessories
Included Items
- W‑M1B113 module
- Plug‑in terminal block (signal connector)
- Detachable DIN‑rail mounting base
- Plastic grounding tab and buckle
- Quick start guide
Optional Accessories
- RS‑232 ↔ RS‑485 isolated converter (G‑M1E001)
- USB ↔ RS‑485 converter (G‑M1A001)
- RS‑485 ↔ RS‑485 repeater (G‑M1F001)
- Replacement EEPROM for configuration backup
Connectors
- Front‑mounted terminal blocks for easy wiring and maintenance
- RS‑485 communication port (D+, D−)
- Power input terminals (+VS, GND, FG)
### 6. Installation & Setup
Mounting Options
- DIN‑Rail Mounting: Standard 35 mm DIN‑rail with detachable base; modules can be docked side‑by‑side using 14‑pin connector arrays for power and communication bus continuity.
- Wall Mounting: Fixed seat can be screwed directly to a panel or wall.
- Grounding: Frame ground via aluminum DIN‑rail or dedicated grounding terminal; plastic isolation tabs available for noisy environments.
Power Supply
- DC 10 – 60 V input; ripple ≤ 5 V p‑p
- Parallel power distribution through DIN‑rail bus (max 10 modules / 30 W per rail)
Communication Setup
- RS‑485 2‑wire half‑duplex network
- Modbus node address set via two rotary switches (1–247)
- Default communication: 9600 bps, N, 8, 1
- Baud rate configurable (1200 – 115.2 kbps)
- Max 32 modules per segment; repeaters extend up to 247 nodes
Indicators
- Power LED: Power and system ready
- System LED: Module status and watchdog indication
- Communication LED: Data exchange and timeout status
Configuration
- Parameters stored in removable EEPROM; transferable between identical modules
- Factory reset via INIT button (press ≥ 3 s)
- Configuration utility available for Windows via RS‑485 connection
### 7. Performance & Capabilities
- Measurement Precision: ± 0.1 % FSR with 16‑bit resolution
- Sampling Throughput: 12 samples per second (total across 6 channels)
- Input Protection: ± 55 V overvoltage; 240 V channel‑to‑channel isolation
- Electrical Isolation: 3 kV DC between I/O, power, and communication
- Noise Immunity: EMI/EMS‑tested for industrial environments
- Reliability: Hardware and software watchdogs ensure automatic recovery from transient faults
- Hot‑Swap Capability: Modules can be replaced live without system shutdown
- EEPROM Backup: Non‑volatile storage of configuration and calibration data
- Safety Behavior: Programmable power‑on and safe‑state outputs prevent unintended actuator operation
Limitations
- Total sampling rate shared across channels (12 samples/s)
- Designed for RTD sensors only (no thermocouple or voltage input)
- Requires proper grounding and shielding for optimal noise immunity
### 8. Standards & Compliance
- Communication Standard: RS‑485 (Modbus/RTU)
- Isolation Standard: 3000 V DC isolation barrier
- EMC Compliance: Tested for EMI and EMS per industrial EMC standards
- Regulatory Compliance:
- CE (EMC Directive compliant when installed in CE‑certified chassis)
- FCC Part 15 Class A device (industrial use)
- Environmental Compliance: RoHS‑compliant materials
- Safety: Designed for continuous operation in harsh industrial environments
### 9. Additional Information
Warranty & Service
- Warranty Period: 5 years from date of purchase
- Coverage: Free repair or replacement for manufacturing defects; excludes misuse, improper installation, or unauthorized modification
- RMA Procedure: Contact dealer for RMA number; include proof of purchase and fault description
- Out‑of‑Warranty Service: Repair or replacement at nominal cost
Maintenance
- Periodic inspection of wiring and grounding recommended
- Firmware and configuration updates via Advanio utility software
- EEPROM replacement possible without recalibration
Technical Support
- Email: service@advanio.com.tw
- Website: [www.advanio.com.tw](http://www.advanio.com.tw)
- Support Response: Within 2 working days
- Information Required: Model number, serial number, firmware version, host configuration, and error details
Manufacturer
Advanio Technology Co., Ltd.
Specialists in industrial I/O, embedded systems, and IoT connectivity solutions for smart manufacturing and automation.
### Summary
The Advanio W‑M1B113 is a compact, high‑accuracy, six‑channel RTD input module engineered for industrial temperature measurement and remote data acquisition. It supports a wide range of RTD sensor types, provides 16‑bit resolution, and communicates via RS‑485 (Modbus/RTU). With 3 kV isolation, ±55 V input protection, and a wide 10–60 V DC power range, it is ideal for harsh industrial environments. The module’s hot‑swap design, EEPROM‑based configuration backup, and programmable safety states simplify maintenance and ensure operational reliability. Certified for EMC and FCC Part 15 compliance, the W‑M1B113 delivers robust performance for Industry 4.0 applications requiring precise, distributed temperature monitoring.
-
Datasheeet_Advanio_Wolf_W-M1B113.pdf
PDF Catalog
-
Advanio_Catalog_Wolf_Series_General.pdf
PDF Catalog
No accessories available.
