LOOKING FOR THE RIGHT
INDUSTRIAL SOLUTION?
Discover embedded, communication and automation solutions tailored to your application.
W-M1B302
32*DI Dry/Wet RS485 Modbus module
161,00 EUR
including VAT 191.59 EUR
- 32 Isolated Digital Inputs: Supports both dry and wet contact configurations for maximum flexibility.
- Dry/Wet Input Modes:
- *Dry contact:* Logic 0 = open, Logic 1 = closed to GND.
- *Wet contact:* Logic 0 = ≤ 3 V DC, Logic 1 = 10 – 50 V DC.
- DI Latch Function: Captures transient signals ≥ 5 ms to prevent missed pulses during polling.
- DI Counter Function: 16‑bit hardware counter per channel, up to 100 Hz input frequency.
- Normal/Inverted Logic: Each channel can be configured as normal or inverted for compatibility with existing control logic.
- Hot‑Swap & Auto‑Configuration: Modules can be replaced without rewiring; configuration stored in removable EEPROM.
- Rotary Switch Addressing: Two hexadecimal rotary switches allow quick Modbus node address setup (1 – 247).
- Wide Power Input Range: +10 V DC to +60 V DC with reverse‑polarity protection; ripple ≤ 5 V p‑p.
- High Isolation: 2.5 kV DC isolation between I/O, power, and communication circuits.
- Compact Form Factor: 47.2 mm slim vertical housing for space‑constrained control panels.
- LED Diagnostics: Three front LEDs indicate power, communication, and system status for easy on‑site troubleshooting.
- Watchdog Protection: Hardware and software watchdogs ensure automatic recovery from communication or system faults.
- Programmable Safety Values: User‑defined safe states on power‑up or communication failure.
- Industrial‑Grade Design: EMC‑tested for EMI/EMS immunity; operating temperature –25 °C to +70 °C.
- Modbus/RTU Protocol: Standard RS‑485 communication up to 115.2 kbps, 1.2 km bus length.
- 5‑Year Warranty: Long‑term reliability backed by Advanio’s extended warranty program.
- Dry/Wet Input Modes:
- *Dry contact:* Logic 0 = open, Logic 1 = closed to GND.
- *Wet contact:* Logic 0 = ≤ 3 V DC, Logic 1 = 10 – 50 V DC.
- DI Latch Function: Captures transient signals ≥ 5 ms to prevent missed pulses during polling.
- DI Counter Function: 16‑bit hardware counter per channel, up to 100 Hz input frequency.
- Normal/Inverted Logic: Each channel can be configured as normal or inverted for compatibility with existing control logic.
- Hot‑Swap & Auto‑Configuration: Modules can be replaced without rewiring; configuration stored in removable EEPROM.
- Rotary Switch Addressing: Two hexadecimal rotary switches allow quick Modbus node address setup (1 – 247).
- Wide Power Input Range: +10 V DC to +60 V DC with reverse‑polarity protection; ripple ≤ 5 V p‑p.
- High Isolation: 2.5 kV DC isolation between I/O, power, and communication circuits.
- Compact Form Factor: 47.2 mm slim vertical housing for space‑constrained control panels.
- LED Diagnostics: Three front LEDs indicate power, communication, and system status for easy on‑site troubleshooting.
- Watchdog Protection: Hardware and software watchdogs ensure automatic recovery from communication or system faults.
- Programmable Safety Values: User‑defined safe states on power‑up or communication failure.
- Industrial‑Grade Design: EMC‑tested for EMI/EMS immunity; operating temperature –25 °C to +70 °C.
- Modbus/RTU Protocol: Standard RS‑485 communication up to 115.2 kbps, 1.2 km bus length.
- 5‑Year Warranty: Long‑term reliability backed by Advanio’s extended warranty program.
Comprehensive Product Summary – Advanio W‑M1B302 32‑Channel Digital Input RS‑485 Modbus Module
### 1. Product Overview
Product Name: 32×DI Dry/Wet RS‑485 Modbus Module
Model Number: W‑M1B302
Series: Wolf Series RS‑485 Remote I/O Modules
Article Number: W‑M1B302
Manufacturer: Advanio Technology Co., Ltd.
The Advanio W‑M1B302 is a high‑density, isolated 32‑channel digital input (DI) module designed for industrial automation and remote I/O applications. It belongs to the Wolf Series, a family of modular RS‑485 remote I/O devices supporting Modbus/RTU communication. The module provides flexible dry or wet contact input modes, latch and counter functions, and robust isolation for reliable operation in harsh industrial environments.
Advanio Technology, founded by a team of IoT and automation experts with over two decades of field experience, specializes in advanced I/O and data acquisition technologies for Industry 4.0 and smart factory applications. The Wolf Series embodies Advanio’s design philosophy of ruggedness, modularity, and ease of maintenance.
### 2. Key Features
- 32 Isolated Digital Inputs: Supports both dry and wet contact configurations for maximum flexibility.
- Dry/Wet Input Modes:
- *Dry contact:* Logic 0 = open, Logic 1 = closed to GND.
- *Wet contact:* Logic 0 = ≤ 3 V DC, Logic 1 = 10 – 50 V DC.
- DI Latch Function: Captures transient signals ≥ 5 ms to prevent missed pulses during polling.
- DI Counter Function: 16‑bit hardware counter per channel, up to 100 Hz input frequency.
- Normal/Inverted Logic: Each channel can be configured as normal or inverted for compatibility with existing control logic.
- Hot‑Swap & Auto‑Configuration: Modules can be replaced without rewiring; configuration stored in removable EEPROM.
- Rotary Switch Addressing: Two hexadecimal rotary switches allow quick Modbus node address setup (1 – 247).
- Wide Power Input Range: +10 V DC to +60 V DC with reverse‑polarity protection; ripple ≤ 5 V p‑p.
- High Isolation: 2.5 kV DC isolation between I/O, power, and communication circuits.
- Compact Form Factor: 47.2 mm slim vertical housing for space‑constrained control panels.
- LED Diagnostics: Three front LEDs indicate power, communication, and system status for easy on‑site troubleshooting.
- Watchdog Protection: Hardware and software watchdogs ensure automatic recovery from communication or system faults.
- Programmable Safety Values: User‑defined safe states on power‑up or communication failure.
- Industrial‑Grade Design: EMC‑tested for EMI/EMS immunity; operating temperature –25 °C to +70 °C.
- Modbus/RTU Protocol: Standard RS‑485 communication up to 115.2 kbps, 1.2 km bus length.
- 5‑Year Warranty: Long‑term reliability backed by Advanio’s extended warranty program.
### 3. Technical Specifications
| Parameter | Specification |
|----------------|------------------|
| Digital Input Channels | 32 isolated channels |
| Input Type | Dry or Wet contact selectable |
| Logic Levels (Dry) | Logic 0 = open; Logic 1 = closed to GND |
| Logic Levels (Wet) | Logic 0 ≤ 3 V DC; Logic 1 = 10 – 50 V DC |
| Input Resistance | 10 kΩ |
| Isolation Voltage | 2.5 kV DC (channel‑to‑system) |
| Over‑Voltage Protection | 70 V DC |
| Counter Frequency | ≤ 100 Hz (16‑bit) |
| Latch Function | Signal capture ≥ 5 ms |
| Power Supply | +10 V DC to +60 V DC (reverse‑polarity protected) |
| Power Consumption | 2.0 W @ 24 V DC |
| Communication Interface | RS‑485, Modbus/RTU |
| Baud Rate | 1200 – 115.2 kbps |
| Communication Distance | Up to 1.2 km (4000 ft) |
| Isolation Protection | 3000 V DC (system) |
| Operating Temperature | –25 °C to +70 °C |
| Storage Temperature | –30 °C to +75 °C |
| Humidity | 5 – 95 % RH (non‑condensing) |
| Dimensions | Width 47.2 mm (slim vertical housing) |
| Mounting | DIN‑rail 35 mm or wall‑mount |
| Weight | Approx. < 300 g (module only) |
| Material | Industrial‑grade ABS/PC enclosure |
| Ingress Protection | IP20 (panel‑mount environment) |
### 4. Functionality
The W‑M1B302 operates as a remote digital input acquisition module on an RS‑485 Modbus/RTU network. A host controller (PLC, PAC, or PC) polls the module to read input states or counter values. Each input channel can detect either dry contact closures or voltage‑driven wet signals, making it suitable for interfacing with switches, sensors, relays, and logic outputs.
Use Cases & Applications:
- Industrial process monitoring and control
- Remote data acquisition systems
- Energy management and power distribution monitoring
- Building and facility automation
- Security and alarm systems
- Laboratory and test automation
- Supervisory control and data acquisition (SCADA)
- Direct digital control (DDC) systems
Compatibility:
Fully compatible with standard Modbus/RTU masters and SCADA software. Can be integrated with Advanio’s Wolf Series analog and relay modules for mixed‑signal systems.
### 5. Components & Accessories
Included in Package:
- W‑M1B302 module
- Detachable 14‑pin terminal block connectors
- DIN‑rail mounting base (fixed seat)
- Plastic isolation tab and grounding accessories
- Quick Start Guide
Optional Accessories:
- RS‑232 ↔ RS‑485 isolated converter (Advanio G‑M1E001)
- USB ↔ RS‑485 converter (Advanio G‑M1A001)
- RS‑485 repeater (Advanio G‑M1F001, for long‑distance or > 32 nodes)
- Replacement EEPROM module for configuration backup
Connectors:
- Plug‑in terminal blocks for I/O (AWG 16 – 30)
- RS‑485 port (D+, D–)
- Power input (+VS, GND, FG)
### 6. Installation & Setup
Mounting Options:
- DIN‑Rail (35 mm): Standard installation using detachable base; modules can be docked side‑by‑side via pin arrays for power and communication bus sharing.
- Wall Mount: Fixed seat can be screwed directly to a panel or wall.
Grounding:
Frame grounding via aluminum DIN rail or dedicated FG terminal. Plastic isolation tabs are available to decouple noisy grounds.
Power Wiring:
Connect +VS (10 – 60 V DC) and GND to the power connector. Ripple must not exceed 5 V p‑p. Only one power source per module chain (max 10 modules per rail, ≈ 30 W total).
RS‑485 Communication:
- Daisy‑chain topology recommended.
- Connect D+ to D+, D– to D– across modules.
- Terminate the last node with 120 Ω resistor if required.
- Up to 32 modules per segment; use repeaters for larger networks.
Address Configuration:
Two rotary switches (SW1 = ones, SW2 = tens) set Modbus node address (1 – 247). Power cycle required after change.
Baud Rate & Format:
Default = 9600 bps, N, 8, 1. Configurable via Modbus register 44107 (0x100A) or Advanio Utility software.
Factory Reset:
Press INIT button ≥ 3 s → LEDs flash 3 times → module resets to defaults (address 01, 9600 bps N,8,1).
Indicators:
- Power LED: ON = power good; flashes 3× on initialization.
- System LED: Flash = normal; solid = fault.
- Communication LED: Flash = active communication; solid = timeout.
### 7. Performance & Capabilities
- Input Response: Detects signals ≥ 5 ms via latch; ensures short pulse capture.
- Counting Function: 16‑bit counter per channel, up to 100 Hz; rising/falling edge selectable.
- Polling Interval: Determined by host; module supports high‑speed Modbus queries.
- Isolation & Noise Immunity: 2.5 kV DC isolation and internal filtering resistors protect against industrial noise.
- Power Efficiency: 2 W @ 24 V DC typical; low heat dissipation.
- Reliability: Hardware watchdog (1.6 s fixed) and programmable system watchdog ensure automatic recovery from faults.
- Hot‑Swap Capability: Modules can be replaced live; configuration restored via EEPROM transfer.
- Scalability: Up to 247 nodes with repeaters; supports daisy‑chain, star, or hybrid topologies.
- Environmental Robustness: Operates continuously in –25 °C to +70 °C, 5 – 95 % RH.
Limitations:
- Counter frequency limited to 100 Hz.
- Input voltage limited to 50 V DC (wet mode).
- Not designed for AC signal detection without external conditioning.
### 8. Standards & Compliance
- Communication Protocol: Modbus/RTU over RS‑485 (EIA‑485 compliant)
- Isolation Protection: 3000 V DC (power, communication, I/O)
- EMC Compliance:
- EMI/EMS tested for industrial environments
- CE‑ready when installed in certified industrial chassis
- FCC Compliance:
- Complies with FCC Part 15, Class A
- Operation subject to standard interference conditions
- Environmental: RoHS‑compliant materials
- Safety: Reverse‑polarity and over‑voltage protection on power input
### 9. Additional Information
Warranty:
5‑year limited warranty from date of purchase. Covers manufacturing defects and normal operation failures. Excludes damage from improper installation, misuse, or unauthorized modification.
Support & Service:
- Technical support via service@advanio.com.tw
- Website: [www.advanio.com.tw](http://www.advanio.com.tw)
- RMA procedure available for defective units (requires serial number and proof of purchase).
Maintenance:
- Periodic inspection of wiring and grounding recommended.
- Firmware and configuration updates via Advanio Utility software.
- EEPROM can be replaced to transfer configuration between modules.
Software Tools:
- Advanio Utility (Windows): Configuration, diagnostics, and firmware management via RS‑485.
- Mobile Access: Advanio Cloud App (Android/iOS) for remote monitoring and product information.
Manufacturer Background:
Advanio Technology Co., Ltd. develops advanced I/O and embedded systems for industrial automation, emphasizing reliability, modularity, and ease of integration. The Wolf Series represents its flagship RS‑485 remote I/O line, engineered for Industry 4.0 connectivity and smart manufacturing.
### Summary
The Advanio W‑M1B302 is a compact, high‑density 32‑channel digital input module engineered for robust industrial data acquisition over RS‑485 Modbus/RTU networks. It combines flexible dry/wet input modes, latch and counter functions, and strong electrical isolation within a slim, modular housing. With hot‑swap capability, EEPROM‑based configuration backup, and intuitive rotary addressing, it simplifies installation and maintenance in distributed control systems. Its wide power range, watchdog protection, and EMC‑certified design ensure dependable operation in demanding environments, making it an ideal choice for smart factories, process control, and building automation systems.
### 1. Product Overview
Product Name: 32×DI Dry/Wet RS‑485 Modbus Module
Model Number: W‑M1B302
Series: Wolf Series RS‑485 Remote I/O Modules
Article Number: W‑M1B302
Manufacturer: Advanio Technology Co., Ltd.
The Advanio W‑M1B302 is a high‑density, isolated 32‑channel digital input (DI) module designed for industrial automation and remote I/O applications. It belongs to the Wolf Series, a family of modular RS‑485 remote I/O devices supporting Modbus/RTU communication. The module provides flexible dry or wet contact input modes, latch and counter functions, and robust isolation for reliable operation in harsh industrial environments.
Advanio Technology, founded by a team of IoT and automation experts with over two decades of field experience, specializes in advanced I/O and data acquisition technologies for Industry 4.0 and smart factory applications. The Wolf Series embodies Advanio’s design philosophy of ruggedness, modularity, and ease of maintenance.
### 2. Key Features
- 32 Isolated Digital Inputs: Supports both dry and wet contact configurations for maximum flexibility.
- Dry/Wet Input Modes:
- *Dry contact:* Logic 0 = open, Logic 1 = closed to GND.
- *Wet contact:* Logic 0 = ≤ 3 V DC, Logic 1 = 10 – 50 V DC.
- DI Latch Function: Captures transient signals ≥ 5 ms to prevent missed pulses during polling.
- DI Counter Function: 16‑bit hardware counter per channel, up to 100 Hz input frequency.
- Normal/Inverted Logic: Each channel can be configured as normal or inverted for compatibility with existing control logic.
- Hot‑Swap & Auto‑Configuration: Modules can be replaced without rewiring; configuration stored in removable EEPROM.
- Rotary Switch Addressing: Two hexadecimal rotary switches allow quick Modbus node address setup (1 – 247).
- Wide Power Input Range: +10 V DC to +60 V DC with reverse‑polarity protection; ripple ≤ 5 V p‑p.
- High Isolation: 2.5 kV DC isolation between I/O, power, and communication circuits.
- Compact Form Factor: 47.2 mm slim vertical housing for space‑constrained control panels.
- LED Diagnostics: Three front LEDs indicate power, communication, and system status for easy on‑site troubleshooting.
- Watchdog Protection: Hardware and software watchdogs ensure automatic recovery from communication or system faults.
- Programmable Safety Values: User‑defined safe states on power‑up or communication failure.
- Industrial‑Grade Design: EMC‑tested for EMI/EMS immunity; operating temperature –25 °C to +70 °C.
- Modbus/RTU Protocol: Standard RS‑485 communication up to 115.2 kbps, 1.2 km bus length.
- 5‑Year Warranty: Long‑term reliability backed by Advanio’s extended warranty program.
### 3. Technical Specifications
| Parameter | Specification |
|----------------|------------------|
| Digital Input Channels | 32 isolated channels |
| Input Type | Dry or Wet contact selectable |
| Logic Levels (Dry) | Logic 0 = open; Logic 1 = closed to GND |
| Logic Levels (Wet) | Logic 0 ≤ 3 V DC; Logic 1 = 10 – 50 V DC |
| Input Resistance | 10 kΩ |
| Isolation Voltage | 2.5 kV DC (channel‑to‑system) |
| Over‑Voltage Protection | 70 V DC |
| Counter Frequency | ≤ 100 Hz (16‑bit) |
| Latch Function | Signal capture ≥ 5 ms |
| Power Supply | +10 V DC to +60 V DC (reverse‑polarity protected) |
| Power Consumption | 2.0 W @ 24 V DC |
| Communication Interface | RS‑485, Modbus/RTU |
| Baud Rate | 1200 – 115.2 kbps |
| Communication Distance | Up to 1.2 km (4000 ft) |
| Isolation Protection | 3000 V DC (system) |
| Operating Temperature | –25 °C to +70 °C |
| Storage Temperature | –30 °C to +75 °C |
| Humidity | 5 – 95 % RH (non‑condensing) |
| Dimensions | Width 47.2 mm (slim vertical housing) |
| Mounting | DIN‑rail 35 mm or wall‑mount |
| Weight | Approx. < 300 g (module only) |
| Material | Industrial‑grade ABS/PC enclosure |
| Ingress Protection | IP20 (panel‑mount environment) |
### 4. Functionality
The W‑M1B302 operates as a remote digital input acquisition module on an RS‑485 Modbus/RTU network. A host controller (PLC, PAC, or PC) polls the module to read input states or counter values. Each input channel can detect either dry contact closures or voltage‑driven wet signals, making it suitable for interfacing with switches, sensors, relays, and logic outputs.
Use Cases & Applications:
- Industrial process monitoring and control
- Remote data acquisition systems
- Energy management and power distribution monitoring
- Building and facility automation
- Security and alarm systems
- Laboratory and test automation
- Supervisory control and data acquisition (SCADA)
- Direct digital control (DDC) systems
Compatibility:
Fully compatible with standard Modbus/RTU masters and SCADA software. Can be integrated with Advanio’s Wolf Series analog and relay modules for mixed‑signal systems.
### 5. Components & Accessories
Included in Package:
- W‑M1B302 module
- Detachable 14‑pin terminal block connectors
- DIN‑rail mounting base (fixed seat)
- Plastic isolation tab and grounding accessories
- Quick Start Guide
Optional Accessories:
- RS‑232 ↔ RS‑485 isolated converter (Advanio G‑M1E001)
- USB ↔ RS‑485 converter (Advanio G‑M1A001)
- RS‑485 repeater (Advanio G‑M1F001, for long‑distance or > 32 nodes)
- Replacement EEPROM module for configuration backup
Connectors:
- Plug‑in terminal blocks for I/O (AWG 16 – 30)
- RS‑485 port (D+, D–)
- Power input (+VS, GND, FG)
### 6. Installation & Setup
Mounting Options:
- DIN‑Rail (35 mm): Standard installation using detachable base; modules can be docked side‑by‑side via pin arrays for power and communication bus sharing.
- Wall Mount: Fixed seat can be screwed directly to a panel or wall.
Grounding:
Frame grounding via aluminum DIN rail or dedicated FG terminal. Plastic isolation tabs are available to decouple noisy grounds.
Power Wiring:
Connect +VS (10 – 60 V DC) and GND to the power connector. Ripple must not exceed 5 V p‑p. Only one power source per module chain (max 10 modules per rail, ≈ 30 W total).
RS‑485 Communication:
- Daisy‑chain topology recommended.
- Connect D+ to D+, D– to D– across modules.
- Terminate the last node with 120 Ω resistor if required.
- Up to 32 modules per segment; use repeaters for larger networks.
Address Configuration:
Two rotary switches (SW1 = ones, SW2 = tens) set Modbus node address (1 – 247). Power cycle required after change.
Baud Rate & Format:
Default = 9600 bps, N, 8, 1. Configurable via Modbus register 44107 (0x100A) or Advanio Utility software.
Factory Reset:
Press INIT button ≥ 3 s → LEDs flash 3 times → module resets to defaults (address 01, 9600 bps N,8,1).
Indicators:
- Power LED: ON = power good; flashes 3× on initialization.
- System LED: Flash = normal; solid = fault.
- Communication LED: Flash = active communication; solid = timeout.
### 7. Performance & Capabilities
- Input Response: Detects signals ≥ 5 ms via latch; ensures short pulse capture.
- Counting Function: 16‑bit counter per channel, up to 100 Hz; rising/falling edge selectable.
- Polling Interval: Determined by host; module supports high‑speed Modbus queries.
- Isolation & Noise Immunity: 2.5 kV DC isolation and internal filtering resistors protect against industrial noise.
- Power Efficiency: 2 W @ 24 V DC typical; low heat dissipation.
- Reliability: Hardware watchdog (1.6 s fixed) and programmable system watchdog ensure automatic recovery from faults.
- Hot‑Swap Capability: Modules can be replaced live; configuration restored via EEPROM transfer.
- Scalability: Up to 247 nodes with repeaters; supports daisy‑chain, star, or hybrid topologies.
- Environmental Robustness: Operates continuously in –25 °C to +70 °C, 5 – 95 % RH.
Limitations:
- Counter frequency limited to 100 Hz.
- Input voltage limited to 50 V DC (wet mode).
- Not designed for AC signal detection without external conditioning.
### 8. Standards & Compliance
- Communication Protocol: Modbus/RTU over RS‑485 (EIA‑485 compliant)
- Isolation Protection: 3000 V DC (power, communication, I/O)
- EMC Compliance:
- EMI/EMS tested for industrial environments
- CE‑ready when installed in certified industrial chassis
- FCC Compliance:
- Complies with FCC Part 15, Class A
- Operation subject to standard interference conditions
- Environmental: RoHS‑compliant materials
- Safety: Reverse‑polarity and over‑voltage protection on power input
### 9. Additional Information
Warranty:
5‑year limited warranty from date of purchase. Covers manufacturing defects and normal operation failures. Excludes damage from improper installation, misuse, or unauthorized modification.
Support & Service:
- Technical support via service@advanio.com.tw
- Website: [www.advanio.com.tw](http://www.advanio.com.tw)
- RMA procedure available for defective units (requires serial number and proof of purchase).
Maintenance:
- Periodic inspection of wiring and grounding recommended.
- Firmware and configuration updates via Advanio Utility software.
- EEPROM can be replaced to transfer configuration between modules.
Software Tools:
- Advanio Utility (Windows): Configuration, diagnostics, and firmware management via RS‑485.
- Mobile Access: Advanio Cloud App (Android/iOS) for remote monitoring and product information.
Manufacturer Background:
Advanio Technology Co., Ltd. develops advanced I/O and embedded systems for industrial automation, emphasizing reliability, modularity, and ease of integration. The Wolf Series represents its flagship RS‑485 remote I/O line, engineered for Industry 4.0 connectivity and smart manufacturing.
### Summary
The Advanio W‑M1B302 is a compact, high‑density 32‑channel digital input module engineered for robust industrial data acquisition over RS‑485 Modbus/RTU networks. It combines flexible dry/wet input modes, latch and counter functions, and strong electrical isolation within a slim, modular housing. With hot‑swap capability, EEPROM‑based configuration backup, and intuitive rotary addressing, it simplifies installation and maintenance in distributed control systems. Its wide power range, watchdog protection, and EMC‑certified design ensure dependable operation in demanding environments, making it an ideal choice for smart factories, process control, and building automation systems.
-
Datasheeet_Advanio_Wolf_W-M1B301_W-M1B302.pdf
PDF Catalog
-
Advanio_Catalog_Wolf_Series_General.pdf
PDF Catalog
No accessories available.
