LOOKING FOR THE RIGHT
INDUSTRIAL SOLUTION?
Discover embedded, communication and automation solutions tailored to your application.
WiFio-403
8*Relay WiFi LAN Modbus-TCP/RTU module
250,00 EUR
including VAT 297.50 EUR
- 8 Relay Output Channels:
Four Form A and four Form C relays, each rated at 5 A @ 250 VAC or 30 VDC, supporting both normally open and change‑over configurations.
- Dual Communication Interfaces:
Integrated Wi‑Fi and Ethernet (LAN) connectivity with Modbus‑TCP and Modbus‑RTU protocol support for flexible integration with PLCs, PACs, SCADA, and industrial PCs.
- Wide Power Input Range:
Operates from +10 VDC to +60 VDC, accommodating 12 V, 24 V, 36 V, 48 V industrial supplies. Ripple peak must not exceed 5 V.
- High Isolation Protection:
Channel‑to‑system isolation up to 2.5 kV DC, protecting internal logic from electrical noise and surges.
- Configurable Digital Output Logic:
Each relay output can be set to normal or inverted logic, simplifying replacement in existing systems with differing logic conventions.
- Industrial‑Grade Design:
Operating temperature range –25 °C to +70 °C, humidity 5–95 % RH, and EMC‑tested for EMI/EMS immunity.
- LED Status Indicators:
Dedicated System, Config, and WLAN LEDs for power, communication, and configuration status monitoring.
- Compact, Space‑Saving Form Factor:
Vertical housing (120.1 × 94.4 × 121.1 mm) weighing approximately 360 g; optimized for DIN‑rail or wall mounting.
- Hot‑Swap and Auto‑Configuration:
Detachable EEPROM retains configuration; parameters can be transferred to a replacement module without reprogramming.
- Programmable Power‑On and Safety Values:
Ensures controlled startup and safe‑state behavior during communication loss or watchdog timeout.
- Long‑Term Reliability:
Integrated hardware and software watchdogs, reverse‑polarity protection, and 5‑year manufacturer warranty.
Four Form A and four Form C relays, each rated at 5 A @ 250 VAC or 30 VDC, supporting both normally open and change‑over configurations.
- Dual Communication Interfaces:
Integrated Wi‑Fi and Ethernet (LAN) connectivity with Modbus‑TCP and Modbus‑RTU protocol support for flexible integration with PLCs, PACs, SCADA, and industrial PCs.
- Wide Power Input Range:
Operates from +10 VDC to +60 VDC, accommodating 12 V, 24 V, 36 V, 48 V industrial supplies. Ripple peak must not exceed 5 V.
- High Isolation Protection:
Channel‑to‑system isolation up to 2.5 kV DC, protecting internal logic from electrical noise and surges.
- Configurable Digital Output Logic:
Each relay output can be set to normal or inverted logic, simplifying replacement in existing systems with differing logic conventions.
- Industrial‑Grade Design:
Operating temperature range –25 °C to +70 °C, humidity 5–95 % RH, and EMC‑tested for EMI/EMS immunity.
- LED Status Indicators:
Dedicated System, Config, and WLAN LEDs for power, communication, and configuration status monitoring.
- Compact, Space‑Saving Form Factor:
Vertical housing (120.1 × 94.4 × 121.1 mm) weighing approximately 360 g; optimized for DIN‑rail or wall mounting.
- Hot‑Swap and Auto‑Configuration:
Detachable EEPROM retains configuration; parameters can be transferred to a replacement module without reprogramming.
- Programmable Power‑On and Safety Values:
Ensures controlled startup and safe‑state behavior during communication loss or watchdog timeout.
- Long‑Term Reliability:
Integrated hardware and software watchdogs, reverse‑polarity protection, and 5‑year manufacturer warranty.
Comprehensive Product Summary – Advanio WiFio‑403 (Wolf Series 8‑Relay WiFi/LAN Modbus‑TCP/RTU Module)
### 1. Product Overview
Product Name: WiFio‑403
Model: WiFio‑403
Series: Wolf Series Remote I/O Modules
Article Number: WiFio‑403
Manufacturer: Advanio Technology Co., Ltd.
The WiFio‑403 is an industrial‑grade 8‑channel relay output module designed for remote control and data acquisition over Wi‑Fi, LAN, and Modbus‑TCP/RTU networks. It belongs to Advanio’s Wolf Series of modular I/O devices, engineered for Industry 4.0 and IoT‑based automation systems. The module integrates eight isolated relay outputs (four Form A and four Form C) with high‑voltage isolation, wide‑range DC power input, and robust communication interfaces suitable for harsh industrial environments.
Advanio Technology Co., Ltd., founded by a team of IoT and automation experts with over 20 years of field experience, specializes in advanced I/O and embedded communication technologies. The company’s Wolf Series modules are designed for reliability, modular scalability, and ease of maintenance in smart factory and process‑control applications.
### 2. Key Features
- 8 Relay Output Channels:
Four Form A and four Form C relays, each rated at 5 A @ 250 VAC or 30 VDC, supporting both normally open and change‑over configurations.
- Dual Communication Interfaces:
Integrated Wi‑Fi and Ethernet (LAN) connectivity with Modbus‑TCP and Modbus‑RTU protocol support for flexible integration with PLCs, PACs, SCADA, and industrial PCs.
- Wide Power Input Range:
Operates from +10 VDC to +60 VDC, accommodating 12 V, 24 V, 36 V, 48 V industrial supplies. Ripple peak must not exceed 5 V.
- High Isolation Protection:
Channel‑to‑system isolation up to 2.5 kV DC, protecting internal logic from electrical noise and surges.
- Configurable Digital Output Logic:
Each relay output can be set to normal or inverted logic, simplifying replacement in existing systems with differing logic conventions.
- Industrial‑Grade Design:
Operating temperature range –25 °C to +70 °C, humidity 5–95 % RH, and EMC‑tested for EMI/EMS immunity.
- LED Status Indicators:
Dedicated System, Config, and WLAN LEDs for power, communication, and configuration status monitoring.
- Compact, Space‑Saving Form Factor:
Vertical housing (120.1 × 94.4 × 121.1 mm) weighing approximately 360 g; optimized for DIN‑rail or wall mounting.
- Hot‑Swap and Auto‑Configuration:
Detachable EEPROM retains configuration; parameters can be transferred to a replacement module without reprogramming.
- Programmable Power‑On and Safety Values:
Ensures controlled startup and safe‑state behavior during communication loss or watchdog timeout.
- Long‑Term Reliability:
Integrated hardware and software watchdogs, reverse‑polarity protection, and 5‑year manufacturer warranty.
### 3. Technical Specifications
| Parameter | Specification |
|----------------|------------------|
| Relay Outputs | 8 channels (4 Form A + 4 Form C) |
| Contact Rating | 5 A @ 250 VAC / 30 VDC |
| Dielectric Strength | 3 kV between coil and contacts |
| Operate / Release Time | 10 ms max / 5 ms max |
| Electrical Endurance | 1 × 10⁵ operations @ 3 A 250 VAC / 30 VDC |
| Isolation Protection | 2.5 kV DC (I/O to logic) |
| Power Supply | +10 VDC to +60 VDC (ripple ≤ 5 V p‑p) |
| Power Consumption | Approx. 200 mA @ 24 VDC |
| Communication Interfaces | Wi‑Fi (IEEE 802.11 b/g/n), LAN (Ethernet 10/100 Mbps), RS‑485 (Modbus‑RTU) |
| Protocols Supported | Modbus‑TCP, Modbus‑RTU |
| Baud Rate (RS‑485) | 1200 – 115.2 kbps |
| Operating Temperature | –25 °C to +70 °C |
| Storage Temperature | –30 °C to +75 °C |
| Humidity | 5 – 95 % RH (non‑condensing) |
| Dimensions (W × H × D) | 120.1 mm × 94.4 mm × 121.1 mm |
| Weight | ~ 360 g |
| Enclosure Material | Industrial‑grade ABS/PC plastic |
| Mounting | DIN‑rail (35 mm) or wall‑mount |
| Indicators | Power/System, Config, WLAN LEDs |
| Isolation Voltage (Wolf Series) | up to 3000 VDC between power, communication, and I/O |
| Compliance | CE EMC (EMI/EMS), FCC Part 15 Class A |
### 4. Functionality
The WiFio‑403 functions as a remote relay output controller within distributed automation networks. It receives Modbus commands from a host controller (PLC, SCADA, or PC) via Wi‑Fi, LAN, or RS‑485. Each relay channel can be switched individually or in groups, enabling control of actuators, solenoids, contactors, or alarms.
Use Cases and Applications
- Industrial process control and machine automation
- Building and HVAC automation
- Energy management and load switching
- Security and access‑control systems
- Laboratory and test automation
- Supervisory control and data acquisition (SCADA)
- Remote equipment monitoring and digital control
Compatibility
- Fully compatible with Modbus‑TCP/RTU masters
- Integrates with Advanio’s Wolf Series analog/digital I/O modules
- Works with standard industrial controllers (Siemens, Schneider, Omron, Beckhoff, etc.)
- Supported by Advanio configuration utilities for Windows and mobile (Android/iOS)
### 5. Components & Accessories
Included Items
- WiFio‑403 module
- Detachable DIN‑rail mounting base
- 14‑pin signal connector block
- Plastic grounding tab and mounting clips
- Quick‑start guide and documentation
Optional Accessories
- RS‑232 ↔ RS‑485 isolated converter (G‑M1A001)
- USB ↔ RS‑485 converter (G‑M1E001)
- RS‑485 repeater (G‑M1F001)
- External antenna (for Wi‑Fi models)
- Replacement EEPROM configuration chip
Connectors
- Plug‑in terminal blocks (#16 – 30 AWG) for I/O and power
- RJ‑45 Ethernet port
- RS‑485 terminal pair (D+, D–)
- Wi‑Fi antenna interface (internal / external depending on model)
### 6. Installation & Setup
Requirements
- DC power supply 10 – 60 VDC
- Host PC or controller with Ethernet, Wi‑Fi, or RS‑485 port
- Modbus‑compatible software or SCADA system
Mounting Options
- DIN‑Rail Mounting: Attach the detachable base to a standard DIN‑35 rail; modules can be docked side‑by‑side using pin arrays for power and communication bus sharing.
- Wall Mounting: Secure the base with screws through pre‑formed holes; insert the module vertically into the base.
Grounding
- Recommended frame ground (F.G.) connection via aluminum DIN rail or power connector.
- Use plastic grounding tabs to isolate frame ground if noise is present.
Power Connection
- Connect +VS and GND to the power supply (10–60 VDC).
- Keep cable length short to minimize voltage drop.
- Only one power source per DIN‑rail chain (max 10 modules ≈ 30 W total).
Communication Setup
- Default RS‑485 settings: 9600 bps, N, 8, 1, address 01.
- Node address set via two rotary switches (1–247).
- Baud rate and parity configurable through Advanio Utility software or Modbus registers.
- Wi‑Fi and LAN parameters configured via web interface or utility tool.
Indicators
- Power LED: On = power OK; flashes during initialization.
- System LED: Flashing = normal operation; steady = fault.
- WLAN LED: Indicates wireless link status.
Factory Reset
- Press INIT button for ≥ 3 s to restore defaults (9600 bps, N, 8, 1, address 01).
Hot‑Swap Procedure
- Remove module from base without disconnecting wiring.
- Transfer EEPROM to new module to restore configuration.
### 7. Performance & Capabilities
- Switching Capacity: 5 A @ 250 VAC / 30 VDC per channel
- Response Time: Relay operate ≤ 10 ms; release ≤ 5 ms
- Isolation: 2.5 kV DC between I/O and logic
- Communication Speed: RS‑485 up to 115.2 kbps; Ethernet 10/100 Mbps; Wi‑Fi up to 150 Mbps (802.11 n)
- Network Distance: RS‑485 up to 1.2 km per segment (extendable with repeaters)
- System Watchdog: Programmable timeout (0–25.5 s in 0.1 s steps)
- Module Watchdog: Hardware reset after 1.6 s of no response
- Power‑On and Safe States: User‑defined relay positions to prevent unintended actuation
- Reliability: Continuous operation in harsh industrial environments with EMI/EMS protection
Limitations
- Mechanical relay contacts subject to wear after > 10⁵ operations at rated load.
- Not intended for high‑frequency switching or AC motor control without snubber circuits.
### 8. Standards & Compliance
- Electrical Safety: Isolation tested to 2.5 kV DC
- EMC Compliance: Designed and tested per CE EMC (EMI / EMS) standards
- FCC Compliance: Part 15 Class A device – operation subject to non‑interference conditions
- Environmental Testing: –25 °C to +70 °C operation, 5–95 % RH non‑condensing
- Quality Assurance: Manufactured under rigorous validation and verification procedures for industrial reliability
### 9. Additional Information
Warranty: 5 years from date of purchase. Covers manufacturing defects and component failures under normal use. Excludes damage from improper installation, modification, or misuse.
Support & Service:
- Technical support via email (service@advanio.com.tw) and official website ([www.advanio.com.tw](http://www.advanio.com.tw))
- RMA procedure available for defective units (requires model number, serial number, and purchase proof)
- Typical response within 2 business days
Maintenance:
- No periodic calibration required for relay modules.
- Inspect terminal tightness and clean contacts periodically in dusty environments.
- Replace relay module if contact resistance increases or switching fails.
Firmware & Software Updates:
- Configuration and firmware updates available through Advanio Utility software (Windows) or mobile apps (Android/iOS).
- Supports EEPROM backup and restore for rapid deployment.
Manufacturer Profile:
Advanio Technology Co., Ltd. develops industrial I/O and communication solutions for smart manufacturing and IoT applications. Its Wolf Series modules cover analog, digital, relay, and mixed I/O types with RS‑485, Ethernet, Wi‑Fi, CAN, EtherCAT, and PROFINET interfaces. All products are engineered for rugged environments and long‑term operation in automation, energy, and building control systems.
### Summary
The Advanio WiFio‑403 is a compact, high‑reliability 8‑relay Wi‑Fi/LAN Modbus‑TCP/RTU module optimized for distributed control and monitoring in industrial and building automation. With its wide power range, robust isolation, and flexible communication options, it bridges traditional RS‑485 networks and modern Ethernet/Wi‑Fi infrastructures. Its hot‑swappable design, EEPROM configuration retention, and programmable safe states make it ideal for mission‑critical applications requiring minimal downtime and maximum safety.
Key Advantages:
- Multi‑protocol (Modbus‑TCP/RTU) connectivity over Wi‑Fi and LAN
- 8 isolated relay outputs with 5 A contact rating
- Wide 10–60 VDC power input and 2.5 kV isolation
- Compact DIN‑rail mount design for space‑constrained panels
- 5‑year warranty and industrial‑grade reliability
Typical Applications: process automation, energy management, remote equipment control, building automation, and IoT‑based monitoring systems.
### 1. Product Overview
Product Name: WiFio‑403
Model: WiFio‑403
Series: Wolf Series Remote I/O Modules
Article Number: WiFio‑403
Manufacturer: Advanio Technology Co., Ltd.
The WiFio‑403 is an industrial‑grade 8‑channel relay output module designed for remote control and data acquisition over Wi‑Fi, LAN, and Modbus‑TCP/RTU networks. It belongs to Advanio’s Wolf Series of modular I/O devices, engineered for Industry 4.0 and IoT‑based automation systems. The module integrates eight isolated relay outputs (four Form A and four Form C) with high‑voltage isolation, wide‑range DC power input, and robust communication interfaces suitable for harsh industrial environments.
Advanio Technology Co., Ltd., founded by a team of IoT and automation experts with over 20 years of field experience, specializes in advanced I/O and embedded communication technologies. The company’s Wolf Series modules are designed for reliability, modular scalability, and ease of maintenance in smart factory and process‑control applications.
### 2. Key Features
- 8 Relay Output Channels:
Four Form A and four Form C relays, each rated at 5 A @ 250 VAC or 30 VDC, supporting both normally open and change‑over configurations.
- Dual Communication Interfaces:
Integrated Wi‑Fi and Ethernet (LAN) connectivity with Modbus‑TCP and Modbus‑RTU protocol support for flexible integration with PLCs, PACs, SCADA, and industrial PCs.
- Wide Power Input Range:
Operates from +10 VDC to +60 VDC, accommodating 12 V, 24 V, 36 V, 48 V industrial supplies. Ripple peak must not exceed 5 V.
- High Isolation Protection:
Channel‑to‑system isolation up to 2.5 kV DC, protecting internal logic from electrical noise and surges.
- Configurable Digital Output Logic:
Each relay output can be set to normal or inverted logic, simplifying replacement in existing systems with differing logic conventions.
- Industrial‑Grade Design:
Operating temperature range –25 °C to +70 °C, humidity 5–95 % RH, and EMC‑tested for EMI/EMS immunity.
- LED Status Indicators:
Dedicated System, Config, and WLAN LEDs for power, communication, and configuration status monitoring.
- Compact, Space‑Saving Form Factor:
Vertical housing (120.1 × 94.4 × 121.1 mm) weighing approximately 360 g; optimized for DIN‑rail or wall mounting.
- Hot‑Swap and Auto‑Configuration:
Detachable EEPROM retains configuration; parameters can be transferred to a replacement module without reprogramming.
- Programmable Power‑On and Safety Values:
Ensures controlled startup and safe‑state behavior during communication loss or watchdog timeout.
- Long‑Term Reliability:
Integrated hardware and software watchdogs, reverse‑polarity protection, and 5‑year manufacturer warranty.
### 3. Technical Specifications
| Parameter | Specification |
|----------------|------------------|
| Relay Outputs | 8 channels (4 Form A + 4 Form C) |
| Contact Rating | 5 A @ 250 VAC / 30 VDC |
| Dielectric Strength | 3 kV between coil and contacts |
| Operate / Release Time | 10 ms max / 5 ms max |
| Electrical Endurance | 1 × 10⁵ operations @ 3 A 250 VAC / 30 VDC |
| Isolation Protection | 2.5 kV DC (I/O to logic) |
| Power Supply | +10 VDC to +60 VDC (ripple ≤ 5 V p‑p) |
| Power Consumption | Approx. 200 mA @ 24 VDC |
| Communication Interfaces | Wi‑Fi (IEEE 802.11 b/g/n), LAN (Ethernet 10/100 Mbps), RS‑485 (Modbus‑RTU) |
| Protocols Supported | Modbus‑TCP, Modbus‑RTU |
| Baud Rate (RS‑485) | 1200 – 115.2 kbps |
| Operating Temperature | –25 °C to +70 °C |
| Storage Temperature | –30 °C to +75 °C |
| Humidity | 5 – 95 % RH (non‑condensing) |
| Dimensions (W × H × D) | 120.1 mm × 94.4 mm × 121.1 mm |
| Weight | ~ 360 g |
| Enclosure Material | Industrial‑grade ABS/PC plastic |
| Mounting | DIN‑rail (35 mm) or wall‑mount |
| Indicators | Power/System, Config, WLAN LEDs |
| Isolation Voltage (Wolf Series) | up to 3000 VDC between power, communication, and I/O |
| Compliance | CE EMC (EMI/EMS), FCC Part 15 Class A |
### 4. Functionality
The WiFio‑403 functions as a remote relay output controller within distributed automation networks. It receives Modbus commands from a host controller (PLC, SCADA, or PC) via Wi‑Fi, LAN, or RS‑485. Each relay channel can be switched individually or in groups, enabling control of actuators, solenoids, contactors, or alarms.
Use Cases and Applications
- Industrial process control and machine automation
- Building and HVAC automation
- Energy management and load switching
- Security and access‑control systems
- Laboratory and test automation
- Supervisory control and data acquisition (SCADA)
- Remote equipment monitoring and digital control
Compatibility
- Fully compatible with Modbus‑TCP/RTU masters
- Integrates with Advanio’s Wolf Series analog/digital I/O modules
- Works with standard industrial controllers (Siemens, Schneider, Omron, Beckhoff, etc.)
- Supported by Advanio configuration utilities for Windows and mobile (Android/iOS)
### 5. Components & Accessories
Included Items
- WiFio‑403 module
- Detachable DIN‑rail mounting base
- 14‑pin signal connector block
- Plastic grounding tab and mounting clips
- Quick‑start guide and documentation
Optional Accessories
- RS‑232 ↔ RS‑485 isolated converter (G‑M1A001)
- USB ↔ RS‑485 converter (G‑M1E001)
- RS‑485 repeater (G‑M1F001)
- External antenna (for Wi‑Fi models)
- Replacement EEPROM configuration chip
Connectors
- Plug‑in terminal blocks (#16 – 30 AWG) for I/O and power
- RJ‑45 Ethernet port
- RS‑485 terminal pair (D+, D–)
- Wi‑Fi antenna interface (internal / external depending on model)
### 6. Installation & Setup
Requirements
- DC power supply 10 – 60 VDC
- Host PC or controller with Ethernet, Wi‑Fi, or RS‑485 port
- Modbus‑compatible software or SCADA system
Mounting Options
- DIN‑Rail Mounting: Attach the detachable base to a standard DIN‑35 rail; modules can be docked side‑by‑side using pin arrays for power and communication bus sharing.
- Wall Mounting: Secure the base with screws through pre‑formed holes; insert the module vertically into the base.
Grounding
- Recommended frame ground (F.G.) connection via aluminum DIN rail or power connector.
- Use plastic grounding tabs to isolate frame ground if noise is present.
Power Connection
- Connect +VS and GND to the power supply (10–60 VDC).
- Keep cable length short to minimize voltage drop.
- Only one power source per DIN‑rail chain (max 10 modules ≈ 30 W total).
Communication Setup
- Default RS‑485 settings: 9600 bps, N, 8, 1, address 01.
- Node address set via two rotary switches (1–247).
- Baud rate and parity configurable through Advanio Utility software or Modbus registers.
- Wi‑Fi and LAN parameters configured via web interface or utility tool.
Indicators
- Power LED: On = power OK; flashes during initialization.
- System LED: Flashing = normal operation; steady = fault.
- WLAN LED: Indicates wireless link status.
Factory Reset
- Press INIT button for ≥ 3 s to restore defaults (9600 bps, N, 8, 1, address 01).
Hot‑Swap Procedure
- Remove module from base without disconnecting wiring.
- Transfer EEPROM to new module to restore configuration.
### 7. Performance & Capabilities
- Switching Capacity: 5 A @ 250 VAC / 30 VDC per channel
- Response Time: Relay operate ≤ 10 ms; release ≤ 5 ms
- Isolation: 2.5 kV DC between I/O and logic
- Communication Speed: RS‑485 up to 115.2 kbps; Ethernet 10/100 Mbps; Wi‑Fi up to 150 Mbps (802.11 n)
- Network Distance: RS‑485 up to 1.2 km per segment (extendable with repeaters)
- System Watchdog: Programmable timeout (0–25.5 s in 0.1 s steps)
- Module Watchdog: Hardware reset after 1.6 s of no response
- Power‑On and Safe States: User‑defined relay positions to prevent unintended actuation
- Reliability: Continuous operation in harsh industrial environments with EMI/EMS protection
Limitations
- Mechanical relay contacts subject to wear after > 10⁵ operations at rated load.
- Not intended for high‑frequency switching or AC motor control without snubber circuits.
### 8. Standards & Compliance
- Electrical Safety: Isolation tested to 2.5 kV DC
- EMC Compliance: Designed and tested per CE EMC (EMI / EMS) standards
- FCC Compliance: Part 15 Class A device – operation subject to non‑interference conditions
- Environmental Testing: –25 °C to +70 °C operation, 5–95 % RH non‑condensing
- Quality Assurance: Manufactured under rigorous validation and verification procedures for industrial reliability
### 9. Additional Information
Warranty: 5 years from date of purchase. Covers manufacturing defects and component failures under normal use. Excludes damage from improper installation, modification, or misuse.
Support & Service:
- Technical support via email (service@advanio.com.tw) and official website ([www.advanio.com.tw](http://www.advanio.com.tw))
- RMA procedure available for defective units (requires model number, serial number, and purchase proof)
- Typical response within 2 business days
Maintenance:
- No periodic calibration required for relay modules.
- Inspect terminal tightness and clean contacts periodically in dusty environments.
- Replace relay module if contact resistance increases or switching fails.
Firmware & Software Updates:
- Configuration and firmware updates available through Advanio Utility software (Windows) or mobile apps (Android/iOS).
- Supports EEPROM backup and restore for rapid deployment.
Manufacturer Profile:
Advanio Technology Co., Ltd. develops industrial I/O and communication solutions for smart manufacturing and IoT applications. Its Wolf Series modules cover analog, digital, relay, and mixed I/O types with RS‑485, Ethernet, Wi‑Fi, CAN, EtherCAT, and PROFINET interfaces. All products are engineered for rugged environments and long‑term operation in automation, energy, and building control systems.
### Summary
The Advanio WiFio‑403 is a compact, high‑reliability 8‑relay Wi‑Fi/LAN Modbus‑TCP/RTU module optimized for distributed control and monitoring in industrial and building automation. With its wide power range, robust isolation, and flexible communication options, it bridges traditional RS‑485 networks and modern Ethernet/Wi‑Fi infrastructures. Its hot‑swappable design, EEPROM configuration retention, and programmable safe states make it ideal for mission‑critical applications requiring minimal downtime and maximum safety.
Key Advantages:
- Multi‑protocol (Modbus‑TCP/RTU) connectivity over Wi‑Fi and LAN
- 8 isolated relay outputs with 5 A contact rating
- Wide 10–60 VDC power input and 2.5 kV isolation
- Compact DIN‑rail mount design for space‑constrained panels
- 5‑year warranty and industrial‑grade reliability
Typical Applications: process automation, energy management, remote equipment control, building automation, and IoT‑based monitoring systems.
-
Advanio WiFio Datasheet-403.pdf
PDF Catalog
-
Advanio_Catalog_Wolf_Series_General.pdf
PDF Catalog
No accessories available.
