- **Processor:** Intel Pentium III 600 MHz CPU, offering balanced performance and power efficiency for embedded and industrial applications. - **Chipset:** Intel 440BX chipset, ensuring stable system operation and compatibility with legacy and contemporary peripheral devices. - **Graphics:** Integrated SMI-721 VGA controller with 4 MB video memory, supporting standard display resolutions for control interfaces and monitoring systems. - **Networking:** Onboard Intel 82559 Ethernet controller providing 10/100 Mbps Fast Ethernet connectivity for reliable network communication. - **Memory Support:** One 144-pin SODIMM socket (notebook standard) supporting SDRAM modules, allowing flexible memory expansion. - **Storage Options:** - Integrated 4.8 GB hard disk drive (HDD) for local data storage. - 3.5" floppy disk drive (FDD) for legacy data transfer and boot operations. - Disk-On-Chip (DOC) socket for solid-state storage or embedded firmware applications. - **I/O Interfaces:** Two USB ports for peripheral connectivity, rear I/O module for extended connectivity options. - **Form Factor:** 6U CompactPCI form factor, compliant with PICMG 2.x standards, suitable for modular system integration. - **Pre-installed Memory:** 64 MB RAM included, ensuring immediate operational readiness. - **Rear I/O Support:** Rear transition module included for additional connectivity and system integration flexibility.

Manufacturer: Adlink Technology Inc.

Category: cPCI CPU Card 6U

- **Processor:** Intel Pentium III 700 MHz CPU, optimized for embedded and industrial computing. - **Chipset:** Intel 440BX chipset providing stable performance and compatibility with legacy and modern peripherals. - **Graphics:** Integrated SMI-721 VGA controller with 4 MB video memory, supporting standard display resolutions for industrial HMI and control interfaces. - **Memory:** One 144-pin SODIMM socket (notebook standard) supporting SDRAM modules; includes 128 MB RAM pre-installed. - **Networking:** Onboard Intel 82559 Ethernet controller offering 10/100 Mbps Fast Ethernet connectivity for reliable network communication. - **Storage Interfaces:** - Disk-On-Chip (DOC) socket for solid-state storage integration. - Support for HDD and FDD connections for traditional storage devices. - **USB Connectivity:** Two USB ports for peripheral expansion and device connectivity. - **Rear I/O Module:** Provides extended connectivity and system integration flexibility through the CompactPCI backplane. - **Form Factor:** 6U CompactPCI (cPCI) standard, ensuring compatibility with a wide range of industrial chassis and backplanes. - **Manufacturer Quality:** Designed and manufactured by ADLINK, known for robust industrial computing solutions with extended lifecycle support.

Manufacturer: Adlink Technology Inc.

Category: cPCI CPU Card 6U

- **Processor:** Intel Pentium III 850 MHz CPU for stable and efficient computing performance. - **Chipset:** Intel 440BX chipset providing robust system architecture and compatibility with legacy and industrial systems. - **Graphics:** Integrated SMI-721 VGA controller with 4 MB video memory, supporting standard display resolutions for industrial HMI and control applications. - **Networking:** Onboard Intel 82559 Ethernet controller offering 10/100 Mbps Ethernet connectivity for reliable network communication. - **Memory Support:** One 144-pin SODIMM socket (notebook standard) supporting SDRAM modules; includes 256 MB RAM pre-installed. - **Storage Options:** Disk-On-Chip (DOC) socket for solid-state storage; supports HDD and FDD interfaces for traditional storage devices. - **I/O Interfaces:** Dual USB ports, VGA output, Ethernet port, and rear I/O module for extended connectivity. - **Form Factor:** 6U CompactPCI (cPCI) compliant board, suitable for standard cPCI chassis and backplanes. - **Rear I/O Support:** Rear I/O module included for enhanced system integration and cable management. - **Industrial Design:** Ruggedized for embedded and industrial environments, ensuring durability and long-term operation. - **Manufacturer:** ADLINK Technology, a leading provider of industrial computing solutions.

Manufacturer: Adlink Technology Inc.

Category: cPCI CPU Card 6U

- **CompactPCI Compliance:** Fully compliant with PICMG 2.0 R2.1 CompactPCI standard. - **Bus Architecture:** 32‑bit PCI bus on P1 connector; optional P2 connector for rear I/O (R‑version). - **Slot Configuration:** 8 total slots — 1 system slot and 7 peripheral slots. - **Rear I/O Support:** Optional rear I/O capability on models cBP‑3208R, cBP‑3206R, and cBP‑3204R. - **Power Interface:** Dual ATX‑style DC power connectors (CN1, CN2) and screw terminal block for flexible power input. - **Selectable I/O Voltage:** V(I/O) selectable between +3.3 V and +5 V (factory default +5 V). - **High‑Density PCB:** 10‑layer printed circuit board for precise impedance control and signal integrity. - **Mechanical Design:** Standard 3U CompactPCI form factor, 9‑slot width (36HP), system slot positioned on the right. - **Power Management Signals:** Integrated connectors for power fail (FAL#), derating (DEG#), inhibit (INH#), and reset (RST#). - **Compatibility:** Designed for use with ADLINK cPCIS‑1000/2000 chassis and compatible CompactPCI CPU and I/O boards. - **Construction:** Industrial‑grade materials ensuring mechanical rigidity and EMI/EMC compliance.

Manufacturer: Adlink Technology Inc.

Category: cPCI Backplanes

- **8-Slot CompactPCI Backplane:** Supports up to eight 3U CompactPCI boards, enabling flexible system expansion and modular configuration. - **32-Bit PCI Bus Architecture:** Compliant with the CompactPCI 32-bit parallel bus standard, ensuring compatibility with a wide range of CompactPCI CPU and peripheral boards. - **Rear I/O Support:** Provides rear I/O connectivity for enhanced system integration and cable management, ideal for applications requiring front-panel space optimization. - **High-Quality 10-Layer PCB:** Multi-layer printed circuit board design ensures excellent signal integrity, reduced crosstalk, and stable power distribution across all slots. - **DIN-41612 31-Pin Power Connector:** Standardized power interface for reliable and secure power delivery to all slots, supporting industrial-grade power requirements. - **3U Form Factor:** Compact and standardized height suitable for rack-mounted or chassis-based CompactPCI systems. - **Industrial-Grade Design:** Built for continuous operation in demanding environments, with robust mechanical and electrical characteristics. - **Scalable System Integration:** Supports a variety of CompactPCI CPU, I/O, and peripheral modules, allowing flexible system customization. - **Optimized Signal Routing:** Controlled impedance traces and ground planes minimize signal degradation and EMI, ensuring stable high-speed communication. - **ADLINK Reliability:** Designed and manufactured by ADLINK, a recognized leader in industrial computing solutions, ensuring long-term availability and support.

Manufacturer: Adlink Technology Inc.

Category: cPCI Backplanes

- **CompactPCI PICMG 2.0 R2.1 Compliant:** Ensures full interoperability with standard CompactPCI boards and modules. - **32‑bit Bus Architecture:** Supports 32‑bit CompactPCI signaling on the P1 connector for system and peripheral slots. - **Rear I/O Capability:** Equipped with P2 connectors on all peripheral slots for rear I/O applications (R‑version). - **8‑Slot Configuration:** One system slot (right‑hand side) and seven peripheral slots for I/O or expansion cards. - **High‑Quality PCB Design:** 10‑layer PCB construction for precise impedance control and minimized crosstalk. - **Flexible Power Input:** Dual ATX‑style connectors and screw terminals for DC input; supports both +3.3 V and +5 V V(I/O) selection. - **Rear I/O Option:** P2 connectors installed for rear signal routing, enabling advanced I/O expansion. - **Compact 3U Form Factor:** Ideal for integration into 3U CompactPCI chassis such as ADLINK’s cPCIS‑1000 and cPCIS‑2000 series. - **System Slot Orientation:** Right‑hand system slot configuration for compatibility with ADLINK CompactPCI chassis layouts. - **Industrial‑Grade Reliability:** Designed for continuous operation in embedded and industrial environments. - **Compatibility:** Works seamlessly with ADLINK CompactPCI power supplies (cPS‑150R, cPS‑175 series) and ATX PSUs via cPCI‑PSF frame.

Manufacturer: Adlink Technology Inc.

Category: cPCI Backplanes

- **8-Slot CompactPCI Configuration:** Supports up to eight CompactPCI peripheral boards, including one system slot and seven peripheral slots, allowing flexible system expansion and modular design. - **64-Bit Data Bus:** Provides a full 64-bit PCI bus interface for high-bandwidth data transfer, ensuring compatibility with 32-bit and 64-bit CompactPCI cards. - **10-Layer PCB Design:** Multi-layer printed circuit board enhances signal integrity, reduces crosstalk, and ensures stable power and ground distribution across all slots. - **High-Speed PCI Signaling:** Compliant with PCI specifications for 33 MHz and 66 MHz operation, supporting high-performance data communication between system and peripheral boards. - **Industrial-Grade Reliability:** Designed for continuous operation in industrial and embedded environments, with robust mechanical construction and high-quality connectors. - **Scalable System Architecture:** Enables flexible system configurations for control, data acquisition, and communication applications. - **Optimized Power Distribution:** Integrated power planes and decoupling capacitors ensure stable voltage delivery to all slots, minimizing noise and voltage drops. - **Backplane Management Support:** Provides system management signals and clock distribution for synchronized operation of all connected modules. - **Compatibility:** Fully compliant with PICMG 2.0 CompactPCI specifications, ensuring interoperability with a wide range of CompactPCI boards and chassis.

Manufacturer: Adlink Technology Inc.

Category: cPCI Backplanes

- **8-Slot CompactPCI Configuration:** Supports up to eight cPCI slots, enabling flexible system expansion and modular design. - **64-Bit Bus Architecture:** Provides high data throughput and compatibility with 64-bit CompactPCI cards, ensuring optimal performance for data-intensive applications. - **3U Form Factor:** Compact 3U height suitable for space-constrained industrial and embedded systems. - **Rear I/O Support:** Designed with rear I/O capability for improved cable management and system integration flexibility. - **DIN 41612 31-Pin Power Socket:** Standardized power interface ensuring reliable power delivery and compatibility with industrial-grade power supplies. - **10-Layer PCB Design:** Multi-layer printed circuit board enhances signal integrity, reduces crosstalk, and supports high-speed data transmission. - **High Reliability and Durability:** Engineered for continuous operation in industrial environments with extended temperature and vibration tolerance. - **Scalable System Integration:** Supports a range of CompactPCI CPU and peripheral boards, allowing system designers to tailor configurations for specific applications. - **Optimized Signal Routing:** Controlled impedance traces and ground planes ensure stable signal performance across all slots. - **Compliance with CompactPCI Standards:** Fully compliant with PICMG 2.0 specifications for interoperability and long-term support.

Manufacturer: Adlink Technology Inc.

Category: cPCI Backplanes

- **Intelligent Serial Controller:** Built‑in Intel i960KA 32‑bit RISC processor (20 MHz) for offloading host CPU tasks. - **CompactPCI Compliance:** Fully compliant with PCI Specification Rev. 2.1; 32‑bit CompactPCI form factor. - **Plug‑and‑Play Configuration:** Automatic IRQ and I/O address assignment via PCI BIOS; no manual configuration required. - **High Scalability:** Modular design supports 8 to 64 ports per controller and up to two controllers per system (maximum 128 ports). - **Flexible Interface Options:** Supports RS‑232, RS‑422, and RS‑485 communication standards through expansion modules. - **Rear I/O Connectivity:** All serial ports are routed through rear I/O connectors for clean front‑panel integration. - **Operating System Support:** Compatible with Windows NT, SCO UNIX, XENIX, AT&T UNIX System V, and other UNIX variants. - **LED Diagnostics:** Front‑panel LEDs for Power, Reset, Fail, and Active status indication. - **High Reliability:** Industrial‑grade design with wide operating temperature range and robust electrical isolation (for cPCI‑6968). - **Ease of Expansion:** Additional 8‑port modules can be added in seconds without system reconfiguration.

Manufacturer: Adlink Technology Inc.

Category: cPCI Serial 4/8-Port

- **Eight Independent Serial Ports:** Provides 8 fully independent RS-232C compatible communication channels. - **CompactPCI 32-bit Interface:** Fully compliant with CompactPCI Specification Rev. 2.1, ensuring compatibility with standard cPCI backplanes. - **Plug-and-Play Configuration:** Automatic IRQ and I/O address assignment by PCI BIOS; no manual configuration required. - **High-Speed Communication:** Supports baud rates from 50 bps up to 115,200 bps per port. - **Optional Isolation and Multi-Protocol Support:** Expandable to isolated RS-232/422/485 interfaces using the optional C588XB external box. - **Intelligent Buffering:** Each port includes FIFO buffering to reduce CPU interrupt frequency and improve system throughput. - **Surge Protection:** Built-in surge protection on all communication lines for enhanced reliability in industrial environments. - **Operating System Support:** Compatible with DOS, Windows 3.1, Windows 95/98, Windows NT, Linux, and SCO OpenServer. - **Scalable System Integration:** Supports up to two cards per system, providing a maximum of 16 serial ports. - **Rear I/O Support:** Optional R-3538 rear I/O transition board for backplane connectivity. - **Compact Form Factor:** 3U Eurocard size (160 mm × 100 mm), suitable for embedded and industrial systems.

Manufacturer: Adlink Technology Inc.

Category: cPCI Serial 4/8-Port

- **CompactPCI 32-bit Form Factor:** Designed for industrial-grade CompactPCI systems, ensuring mechanical robustness and electrical compatibility. - **Plug-and-Play PCI Rev. 2.1 Compliance:** Automatic IRQ and I/O address assignment by the system BIOS eliminates manual configuration. - **Eight Independent Serial Ports:** Provides eight RS-232C compatible communication channels for simultaneous multi-device connectivity. - **High-Speed Communication:** Supports baud rates from 50 bps up to 115,200 bps per port. - **Optional Isolation and Multi-Protocol Support:** Expandable to isolated RS-232/422/485 interfaces using the external C588XB isolation box. - **Intelligent Buffering:** Each port includes FIFO buffering to reduce CPU interrupt frequency and improve system throughput. - **Multi-Card Support:** Up to two cPCI-3538 cards can be installed in a single system, providing a total of 16 serial ports. - **Operating System Compatibility:** Supports DOS, Windows 3.1, Windows 95/98, and Windows NT. - **Surge Protection:** Integrated surge protection circuitry ensures reliable operation in industrial environments. - **Rear I/O Support:** Compatible with the R-3538 rear I/O transition board for backplane connectivity. - **Applications:** Ideal for modems, data acquisition, process control, telecommunications, and industrial automation systems.

Manufacturer: Adlink Technology Inc.

Category: cPCI Serial 4/8-Port

- **CompactPCI 32‑bit Form Factor:** Fully compliant with the CompactPCI specification, offering robust mechanical and electrical integration into industrial systems. - **Plug‑and‑Play PCI Rev. 2.1 Compliance:** Automatic IRQ and I/O address assignment via PCI BIOS eliminates manual configuration. - **Eight Independent Communication Ports:** Each port supports RS‑232C signaling, with optional isolation and RS‑422/RS‑485 capability through external expansion modules. - **Rear I/O Support:** The “R” variant (cPCI‑3538R) provides rear I/O connectivity via the R‑3538 transition board, enabling cable management and front‑panel space optimization. - **High‑Speed Serial Communication:** Supports baud rates from 50 bps up to 115,200 bps per port. - **Intelligent Buffering:** Each port includes transmit and receive buffers to minimize CPU interrupts and improve throughput. - **Optional Isolation and Mixed Interface Support:** Compatible with the C888XB or C588XB isolation boxes for mixed RS‑232/422/485 configurations. - **Operating System Compatibility:** Supports DOS, Windows 3.1, Windows 95/98, Windows NT, and Linux/SCO OpenServer environments. - **Scalable System Integration:** Up to two cards per system, providing a maximum of 16 serial ports. - **Surge Protection:** Built‑in surge protection on all communication lines for enhanced reliability in industrial environments. - **Compact Design:** 3U Eurocard size (160 mm × 100 mm) suitable for embedded and rack‑mounted cPCI systems.

Manufacturer: Adlink Technology Inc.

Category: cPCI Serial 4/8-Port

- **CompactPCI 3U Eurocard Form Factor:** Fully compliant with PICMG 2.0 R2.1 standards. - **High-Resolution Analog Input:** 12-bit A/D resolution with up to 110 kS/s sampling rate. - **Flexible Input Configuration:** 16 single-ended or 8 differential analog input channels. - **Programmable Input Ranges:** Bipolar (±0.625 V to ±10 V) and unipolar (0–1.25 V to 0–10 V). - **Programmable Gain Control:** x0.5, x1, x2, x4, x8 for signal scaling and precision adjustment. - **Automatic Channel Scanning:** Hardware-based auto-scan for multi-channel acquisition. - **Bus-Mastering DMA:** High-speed data transfer without CPU overhead. - **Dual 12-bit Analog Outputs:** Two multiplying DAC channels with 0–5 V or 0–10 V ranges. - **Digital I/O:** 16 TTL-compatible digital inputs and 16 TTL-compatible digital outputs. - **Timer/Counter:** One 16-bit general-purpose counter/timer (8254 compatible) with 2 MHz base clock. - **Rear I/O Option:** cPCI-9112R supports rear I/O connectivity via J2/P2 backplane interface. - **Software & OS Support:** Drivers for Windows (XP/7/10), Linux, and Windows CE; compatible with LabVIEW™, MATLAB®, and DAQBench™. - **Rugged Industrial Design:** 100-pin SCSI-II type connector, 100 × 160 mm PCB, and extended temperature range operation.

Manufacturer: Adlink Technology Inc.

Category: A/D Intelligent PXI/PXIe/cPCI

- **High-Resolution Analog Input:** 16-bit A/D conversion with up to 250 kS/s sampling rate. - **Flexible Channel Configuration:** 64 single-ended or 32 differential analog input channels, software-selectable per channel. - **Programmable Gain and Range:** Four programmable gains (×1, ×2, ×4, ×8) with bipolar and unipolar ranges. - **Onboard FIFO Buffer:** 1 k-sample A/D FIFO for efficient data buffering and high-speed acquisition. - **Channel-Gain Queue:** 512-entry channel-gain queue for mixed input configurations and sequential scanning. - **Multiple Trigger Modes:** Software, pre-trigger, post-trigger, middle-trigger, delay-trigger, and re-trigger modes. - **Bus-Mastering DMA:** High-speed data transfer via PCI bus-mastering DMA, minimizing CPU load. - **Digital I/O:** 8 TTL-compatible digital input and 8 digital output channels. - **Timer/Counter:** One 16-bit general-purpose up/down timer/counter with 24 MHz base clock. - **Rear I/O Option:** cPCI-9116R variant supports rear I/O connectivity through the CompactPCI backplane. - **Software Support:** Compatible with Windows and Linux; drivers for LabVIEW®, MATLAB®, and DAQPilot. - **CompactPCI Compliance:** Fully compliant with PICMG 2.0 R2.1 standard for 3U Eurocard form factor. - **Rugged Connectivity:** 100-pin SCSI-II type connector for secure and high-density signal interfacing.

Manufacturer: Adlink Technology Inc.

Category: A/D Intelligent PXI/PXIe/cPCI

- **High-Resolution Analog Input:** 12-bit A/D conversion with up to 110 kS/s sampling rate. - **Flexible Input Configuration:** 16 single-ended or 8 differential analog input channels. - **Programmable Input Ranges:** Bipolar ±0.625V to ±10V and unipolar 0–1.25V to 0–10V. - **Analog Output:** Two 12-bit D/A channels with 0–5V or 0–10V output range, ±5 mA drive, and 30 µs settling time. - **Digital I/O:** 16 TTL-compatible digital inputs and 16 TTL-compatible digital outputs. - **Programmable Counter/Timer:** Three 16-bit down counters (Intel 8254 compatible) with 2 MHz base clock. - **FIFO Buffer:** 2K-word onboard FIFO for high-speed A/D data buffering (1K FIFO for 6U version). - **Triggering Modes:** Software, internal timer pacer, and external trigger support. - **Data Transfer Modes:** Bus mastering DMA, interrupt-driven, or program-controlled transfer. - **Auto-Scan Function:** Hardware-based automatic channel scanning for multi-channel acquisition. - **Rugged Connectivity:** 100-pin SCSI-II type front connector for CompactPCI; optional rear I/O via transition board (DB-100RU). - **CompactPCI Compliance:** Fully compliant with CompactPCI 6U mechanical and electrical standards. - **Software Support:** Comprehensive driver and library support for Windows and DOS, including LabVIEW®, HP-VEE™, DASYLab™, and OPC. - **Integrated DC-DC Converter:** Provides stable analog power isolation from digital noise. - **Plug-and-Play Configuration:** Automatic resource allocation via PCI BIOS. - **Industrial Durability:** Designed for 0°C–60°C operation and 5–95% non-condensing humidity.

Manufacturer: Adlink Technology Inc.

Category: A/D Intelligent PXI/PXIe/cPCI

- **High-Resolution Analog Input:** 16-bit A/D resolution with a maximum sampling rate of 250 kS/s. - **Channel Density:** 64 single-ended (SE) or 32 differential (DI) analog input channels, software-selectable per channel. - **Programmable Input Ranges:** Bipolar: ±0.625 V, ±1.25 V, ±2.5 V, ±5 V Unipolar: 0–1.25 V, 0–2.5 V, 0–5 V, 0–10 V - **Programmable Gain:** x1, x2, x4, x8 gain settings, software-configurable. - **FIFO Buffer:** 1 k-sample onboard A/D FIFO for efficient data buffering. - **Channel-Gain Queue:** 512-entry configuration queue for channel, gain, and mode sequencing. - **Triggering Modes:** Software, pre-trigger, post-trigger, middle-trigger, delay-trigger, and repeated trigger. - **Data Transfer Modes:** Polling, interrupt-driven, and bus-mastering DMA for high-speed data throughput. - **Digital I/O:** 8 TTL-compatible digital inputs and 8 TTL-compatible digital outputs. - **Timer/Counter:** One 16-bit general-purpose up/down timer/counter with 24 MHz base clock. - **Rear I/O Option:** Available on cPCI-9116R variant for backplane routing via J2/P2 connector. - **Software Support:** Compatible with Windows (7/Vista/XP/2000/2003), Linux, and Windows CE (on request). - **Driver & API Support:** DAQPilot, PCIS-DASK, PCIS-DASK/X, DAQBench, LabVIEW™, MATLAB®, and .NET libraries. - **Rugged Connectivity:** 100-pin SCSI-II type connector for reliable industrial interfacing. - **Plug-and-Play PCI Configuration:** Automatic IRQ and address assignment, no jumpers required.

Manufacturer: Adlink Technology Inc.

Category: A/D Intelligent PXI/PXIe/cPCI

- **High-Resolution Analog Input:** 12-bit A/D resolution with up to 110 kS/s sampling rate. - **Flexible Input Configuration:** 16 single-ended or 8 differential analog input channels with programmable gain and selectable bipolar/unipolar ranges. - **Programmable Gain Control:** Software-selectable gains of x0.5, x1, x2, x4, and x8 for precise signal scaling. - **Analog Output Capability:** Two 12-bit multiplying D/A channels with software-programmable output ranges (0–5 V, 0–10 V, or external reference). - **Digital I/O:** 16 TTL-compatible digital inputs and 16 TTL-compatible digital outputs. - **Timer/Counter:** One 16-bit general-purpose timer/counter (Intel 8254 compatible) with 2 MHz base clock and external clock input up to 10 MHz. - **Rear I/O Connectivity:** All I/O signals are routed through the CompactPCI J2/P2 connector for rear transition module access (DB-100RU). - **Bus-Mastering DMA:** High-speed data transfer via bus-mastering DMA for analog input operations. - **Automatic Channel Scanning:** Hardware-based auto-scan for sequential analog input sampling. - **FIFO Buffer:** 2K-word FIFO for analog input data buffering (expanded from 8 words on PCI-9112). - **Software & OS Support:** Compatible with Windows 7/Vista/XP/2000/2003 Server, Linux, and Windows CE (on request). Supported by ADLINK DAQPilot, PCIS-DASK, and DAQBench software suites. - **CompactPCI Compliance:** Fully compliant with PICMG 2.0 R2.1 CompactPCI specifications. - **Rugged Design:** 3U Eurocard (100 mm x 160 mm) with 100-pin SCSI-II type rear I/O connector.

Manufacturer: Adlink Technology Inc.

Category: A/D Intelligent PXI/PXIe/cPCI

- **High-Resolution Analog Input:** 16-bit A/D conversion with up to 250 kS/s sampling rate for precise signal measurement. - **Flexible Channel Configuration:** 64 single-ended or 32 differential analog input channels, software-selectable per channel. - **Programmable Input Ranges:** Bipolar: ±0.625 V, ±1.25 V, ±2.5 V, ±5 V Unipolar: 0–1.25 V, 0–2.5 V, 0–5 V, 0–10 V - **Programmable Gain:** x1, x2, x4, x8 gain settings per channel. - **Onboard FIFO Buffer:** 1 k-sample A/D FIFO for efficient data buffering and reduced CPU load. - **Channel-Gain Queue:** 512-entry configuration queue allowing mixed channel, gain, and input type sequences. - **Triggering Flexibility:** Supports software, pre-trigger, post-trigger, middle-trigger, delay-trigger, and re-trigger modes. - **Data Transfer Modes:** Polling, interrupt-driven, and bus-mastering DMA for high-speed data throughput. - **Digital I/O:** 8 TTL-compatible digital inputs and 8 TTL-compatible digital outputs. - **Timer/Counter:** One 16-bit general-purpose up/down timer/counter with 24 MHz base clock. - **Rear I/O Connectivity:** The cPCI-9116R routes all I/O signals through the CompactPCI J2/P2 connector for rear transition modules. - **Software & OS Support:** Compatible with Windows 7/Vista/XP/2000/2003, Linux, and Windows CE (on request). Supported APIs: DAQPilot, PCIS-DASK, LabVIEW™, MATLAB®, DAQBench ActiveX. - **Plug-and-Play PCI Configuration:** Fully compliant with PCI bus auto-configuration for IRQ and memory mapping. - **Rugged Industrial Design:** 3U Eurocard form factor with 100-pin SCSI-II type connector.

Manufacturer: Adlink Technology Inc.

Category: A/D Intelligent PXI/PXIe/cPCI

- **CompactPCI Compliance:** Fully compliant with PICMG 2.0 R2.1 and PICMG 2.1 Hot Swap R1.0 specifications. - **Processor:** Socket‑7 PPGA Low‑Power Pentium‑MMX CPU up to 266 MHz. - **Chipset:** Intel 430TX (82439TX MTXC + 82371EB PIIX4E). - **Memory:** One 144‑pin SO‑DIMM socket supporting up to 256 MB SDRAM (3.3 V unbuffered). - **Storage:** - 32 MB onboard flash disk (Disk‑On‑Chip socket supports up to 144 MB). - Two 44‑pin EIDE connectors supporting up to four IDE devices (PIO Mode 3/4, Ultra DMA/33). - Built‑in housing for 2.5″ low‑profile HDD. - Separable slim‑type 3.5″ FDD module. - **Networking:** Integrated Intel 82559 10/100 Mb Ethernet controller with PXE remote boot support. - **I/O Interfaces:** - Two USB 1.1 ports (front panel). - Two serial ports (COM1 RS‑232, COM2 RS‑232/422/485). - One parallel port (SPP/EPP/ECP). - PS/2 keyboard and mouse connectors. - **System Management:** Dual watchdog timers, hardware monitoring (Winbond W83781D), and BIOS power management. - **Indicators & Controls:** Power LED, IDE activity LED, Ethernet link/speed LEDs, and reset switch. - **Form Factor:** 3U CompactPCI (100 × 160 mm), 3‑slot (12 TE/HP) width with FDD module. - **Environmental Robustness:** Designed for industrial applications with extended temperature and vibration tolerance. - **Software Support:** Drivers for Windows 95/98/NT/2000, Linux, Novell, SCO Unix, VxWorks, and DOS.

Manufacturer: Adlink Technology Inc.

Category: cPCI CPU LPP-266

- **CompactPCI Compliance:** Fully compliant with PICMG 2.0 R2.1 and PICMG 2.1 Hot Swap R1.0 specifications. - **Processor:** Socket‑7 PPGA Low‑Power Pentium‑MMX CPU up to 266 MHz. - **Chipset:** Intel 430TX (82439TX + 82371EB PIIX4E). - **Memory:** One 144‑pin SO‑DIMM socket supporting up to 256 MB unbuffered SDRAM. - **Storage:** - Integrated 2.5″ HDD bay (≥ 5 GB ATA HDD standard). - Slim‑type 3.5″ FDD module (separable). - Two 44‑pin EIDE connectors supporting up to four IDE devices. - DiskOnChip socket supporting up to 144 MB flash storage. - **Networking:** Onboard Intel 82559 10/100 Mb Ethernet controller with PXE remote boot support. - **I/O Interfaces:** - Two USB 1.1 ports (front panel). - Two serial ports (COM1 RS‑232, COM2 RS‑232/422/485 selectable). - One parallel port (Mini D‑Sub 26‑pin). - PS/2 keyboard and mouse connectors. - **System Monitoring:** Winbond W83781D hardware monitor for CPU/system temperature, fan speed, and voltage. - **Watchdog Timers:** Two independent programmable watchdog timers (WDT1 and WDT2). - **Form Factor:** 3U CompactPCI, available in 3‑slot (12 TE/HP) or 2‑slot (8 TE/HP) configurations. - **Indicators & Controls:** Power and IDE LEDs, Ethernet link/activity LEDs, and front‑panel reset switch. - **Environmental Robustness:** Designed for industrial temperature, vibration, and shock conditions. - **Software Support:** Drivers for Windows 95/98/NT/2000, Linux, SCO Unix, VxWorks, and Novell NetWare. - **Utility Support:** Hardware Doctor monitoring utility and PXE boot environment tools.

Manufacturer: Adlink Technology Inc.

Category: cPCI CPU LPP-266

- **CompactPCI Compliance:** Fully compliant with **PICMG 2.0 R2.1** and **PICMG 2.1 Hot Swap R1.0**, ensuring compatibility with standard CompactPCI backplanes and peripheral modules. - **Processor Options:** Supports **Intel Low Power BGA2 Pentium-III** and **Celeron** processors. The cPCI-3720A/C42 specifically integrates a **Celeron 400 MHz** CPU with **128 KB on-die L2 cache**. - **Memory Support:** One **144-pin SO-DIMM socket** supporting up to **256 MB unbuffered SDRAM** (notebook standard). - **Dual Ethernet Connectivity:** Two **Intel 82559ER** controllers providing **10/100Base-TX** Ethernet ports with **IEEE 802.3**, **802.3u**, and **802.3x** compliance. - **Storage Interfaces:** Integrated **44-pin EIDE interface** supporting two IDE devices and a **CompactFlash socket** (8 MB to 512 MB). - **USB and Serial I/O:** Two **USB 1.1** ports (front and rear I/O), two **COM ports** (one RJ-45 on front, one on rear), and one **parallel port** on rear I/O. - **Peripheral Support:** Integrated **PS/2 keyboard and mouse connector**, **floppy drive interface**, and **watchdog timer**. - **Hardware Monitoring:** Onboard **Winbond W83782D** monitors CPU temperature, system temperature, and DC voltages. - **Hot-Swap Capability:** Supports **hot-swappable I/O** and single-board hot-swap operation in standalone environments. - **Environmental Robustness:** Designed for industrial conditions with operating temperature from **0°C to 55°C**, and vibration/shock resistance per industrial standards. - **Indicators and Controls:** Front panel includes **Active (Green)**, **HDD (Red)**, **WDT (Amber)**, and **General Purpose (Blue)** LEDs, plus a **reset switch**.

Manufacturer: Adlink Technology Inc.

Category: cPCI CPU P-III Level

- **PICMG Compliance:** Fully compliant with PICMG 2.0 CompactPCI Specification Revision 2.1 and PICMG 2.1 Hot Swap Specification Revision 1.0. - **Processor Options:** Supports Intel Low Power BGA2 Pentium III (up to 1 GHz) and Celeron CPUs (up to 700 MHz). The cPCI-3720B/C42 model is equipped with a Celeron 400 MHz processor featuring 128 KB on-die L2 cache. - **Memory Support:** One 144-pin SO-DIMM socket supporting up to 256 MB unbuffered SDRAM. - **Dual Ethernet Connectivity:** Two 10/100 Mbps Ethernet ports powered by Intel 82559ER controllers, supporting IEEE 802.3, 802.3u, and 802.3x standards. - **Integrated I/O:** Includes USB, serial, parallel, PS/2 keyboard/mouse, IDE, and CompactFlash interfaces. - **Storage Options:** Internal CompactFlash IDE interface and support for 2.5" ATA HDD in the 2-slot configuration. - **Hot-Swap Capability:** Supports hot-swappable operation under single SBC environments. - **Hardware Monitoring:** Onboard Winbond W83782D chip monitors CPU temperature, system temperature, and DC voltages. - **Watchdog Timer:** Programmable watchdog timer with selectable NMI or system reset output. - **CompactPCI Bus Mastering:** Supports up to seven PCI bus-master devices on the CompactPCI backplane. - **Environmental Robustness:** Designed for industrial environments with extended temperature, vibration, and shock tolerance. - **Front Panel Indicators:** LEDs for system activity, HDD access, watchdog status, and general-purpose signaling.

Manufacturer: Adlink Technology Inc.

Category: cPCI CPU P-III Level

- **Processor Support:** Intel Celeron 300–533 MHz (Socket 370), optional Pentium III‑500E/550E. - **Chipset:** Intel 440BX AGPset with integrated PCI EIDE controller and real‑time clock. - **Memory:** One 144‑pin SO‑DIMM socket supporting up to 128 MB SDRAM with ECC. - **Graphics:** C&T 69000 VGA chipset with 2 MB embedded SDRAM; supports simultaneous CRT and LCD output up to 1280 × 1024 @ 8 bpp. - **Storage Interfaces:** - One internal EIDE interface (Ultra DMA/33) with default 2.1 GB HDD. - One 3.5″ FDD (360 KB–1.44 MB) on standard version. - DiskOnChip socket supporting 2 MB–144 MB flash storage and boot capability. - **I/O Interfaces:** - Two RS‑232 serial ports (COM1 front, COM2 rear). - One high‑speed parallel port (SPP/ECP/EPP). - Two USB 1.0 connectors. - PS/2 keyboard and mouse connectors. - IrDA interface header. - **Watchdog Timer:** 16‑level programmable timer (0–30 s) for system recovery. - **Hardware Monitoring:** Onboard sensors for CPU temperature, voltage, and fan speed with alarm function. - **Power Management:** BIOS‑controlled green function with keyboard/mouse wake‑up. - **Form Factor:** 3U CompactPCI (100 × 160 mm PCB). - **Operating Environment:** 0 °C – 60 °C, 5 % – 95 % RH. - **BIOS:** Award Plug‑and‑Play BIOS with Flash EEPROM (256 KB) for updates, DMI support, and Year 2000 compliance.

Manufacturer: Adlink Technology Inc.

Category: cPCI CPU P-III Level

- **Processor Support:** Intel Pentium MMX (P54C/P55C), AMD K5/K6, and Cyrix M1/M2 CPUs up to 233 MHz. - **Chipset:** Intel 430HX (Triton II) system chipset for stable and efficient performance. - **Memory:** Supports up to 256 MB of 3.3V FPM/EDO DRAM via two 144-pin SO-DIMM sockets (notebook standard). - **Cache:** 512 KB second-level pipeline burst cache for enhanced data throughput. - **Storage Options:** - Onboard **DiskOnChip socket** (M-Systems) supporting 2 MB to 72 MB flash storage. - Dual **IDE interfaces** supporting up to two PCI Mode 4 Enhanced IDE hard drives. - Dual **floppy drive interfaces** supporting 3.5" and/or 5.25" drives. - **I/O Interfaces:** - Two serial ports (one RS-232, one configurable RS-232/RS-422/RS-485). - One parallel port (EPP/ECP bi-directional). - Two USB ports. - PS/2 keyboard and mouse connectors. - **Watchdog Timer:** Programmable 0–64 second interval with system reset capability. - **CompactPCI Bus Interface:** Fully compliant with **PICMG 3U CompactPCI** standard. - **Front Panel Design:** Aluminum Eurocard front plate with ejector handle for easy installation/removal. - **Operating Temperature:** 0°C to 60°C (32°F to 140°F). - **Power Requirements:** +5V DC at 4.0A. The cPCI-8586 is engineered for rugged industrial environments, offering reliable operation, modular expandability, and long-term availability for embedded system integrators.

Manufacturer: Adlink Technology Inc.

Category: cPCI CPU LPP-266

- **CompactPCI Compliance:** Fully compliant with PICMG 2.0 R2.1 and PICMG 2.1 Hot Swap R1.0 specifications. - **Low‑Power CPU:** Socket‑7 PPGA Low‑Power Pentium‑MMX processor up to 266 MHz with 512 KB L2 cache. - **Intel 430TX Chipset:** Incorporates Intel 82439TX (MTXC) and 82371EB (PIIX4E) for stable, legacy‑compatible performance. - **Memory Support:** One 144‑pin SO‑DIMM socket supporting up to 256 MB unbuffered SDRAM. - **Integrated Networking:** Onboard Intel 82559 10/100 Mb Ethernet controller with PXE remote‑boot support. - **Storage Options:** Two 44‑pin EIDE connectors supporting up to four IDE devices; one DiskOnChip socket supporting up to 144 MB DOC flash; onboard 32 MB flash disk. - **Peripheral Interfaces:** Two USB 1.1 ports, two serial ports (RS‑232 and RS‑232/422/485), one parallel port, PS/2 keyboard and mouse ports. - **Watchdog Timers:** Dual programmable watchdog timers (WDT1 and WDT2) for system reliability. - **Hardware Monitoring:** Winbond W83781D chip monitors CPU temperature, fan speed, voltages. - **Hot Swap Support:** Compliant with CompactPCI Hot Swap specification for modular maintenance. - **Environmental Ruggedness:** Designed for industrial operation (0 – 60 °C operating range, shock and vibration tested). - **Form Factor Flexibility:** Available in 2‑slot (8TE/HP) and 3‑slot (12TE/HP) widths for different system requirements. - **BIOS Features:** Award PnP BIOS with 2 Mb Flash ROM, DMI support, power management, and custom OEM boot screen. - **PXE Network Boot:** Supports Intel Preboot Execution Environment for remote boot and network installation.

Manufacturer: Adlink Technology Inc.

Category: cPCI CPU LPP-266