- **Dual 4×1 RF Multiplexer Configuration:** Two independent 4-to-1 multiplexers on a single 3U PXI card, enabling flexible routing of multiple RF signal paths. - **High Bandwidth Performance:** Supports up to **1.5 GHz (-3 dB)** bandwidth, ensuring minimal signal degradation and accurate high-frequency switching. - **75 Ω Characteristic Impedance:** Optimized for video, broadcast, and RF measurement systems requiring precise impedance matching. - **Programmable Delay Function:** Allows fine-tuning of signal timing for synchronization and calibration in complex test setups. - **PXI / CompactPCI 3U Form Factor:** Standardized 3U module (100 mm × 160 mm) compatible with PXI and CompactPCI backplanes. - **Hot-Swappable Design:** Compliant with **PICMG 2.1 R1.0**, enabling safe insertion and removal without powering down the chassis. - **Plug and Play Operation:** Automatic resource detection and configuration within PXI systems for simplified setup. - **SMB Connectors:** High-quality SMB coaxial connectors ensure secure, low-loss RF connections. - **Robust Construction:** Industrial-grade design for long-term reliability in laboratory and production environments. - **Software Integration:** Compatible with PXI system controllers and standard test software frameworks for automated control.

Hersteller: Adlink Technology Inc.

Kategorie: DIO Non-Isolated PXI/PXIe/cPCI

- **Digital I/O Capability:** - 32 TTL digital input channels. - 32 TTL digital output channels. - TTL/DTL compatible logic levels. - High output drive and low input loading. - **Counter/Timer System:** - Six independent 16‑bit programmable counters (Intel/NEC 8254 architecture). - Three independent programmable 16‑bit down counters. - One 32‑bit timer (two 16‑bit counters cascaded). - One 16‑bit counter with 4 MHz time base. - On‑board crystal‑based frequency sources (10 kHz, 100 kHz, 1 MHz). - Frequency scaling via jumpers (×2, ×½, ×¼). - Supports timer pacer and event counting interrupts. - **Bus Interface:** - PC‑AT (ISA) bus compatible. - Fully hardware and software compatible with Advantech PCL‑720. - **Interrupt Support:** - Selectable IRQ levels (IRQ3–IRQ15). - Configurable interrupt trigger sources: timer pacer, event, or external. - **Connectivity:** - Four 20‑pin IDC connectors for digital I/O (CN1–CN4). - One 20‑pin connector (CN5) for counter/timer signals. - Breadboard area for custom circuitry. - **Software Support:** - DOS library and utilities included. - Optional Windows support via ACLS‑DLL1 (for VB, VC++, Delphi). - Optional LabVIEW integration via ACLS‑LVIEW. - **Environmental & Reliability:** - Operating temperature: 0 °C – 60 °C. - Humidity: 0 – 90 % non‑condensing.

Hersteller: Adlink Technology Inc.

Kategorie: DIO Non-Isolated ISA

- **Digital I/O Channels:** - 32 TTL digital input channels - 32 TTL digital output channels - TTL/DTL compatible logic levels - High output drive capability and low input loading - **Counter/Timer Capabilities:** - Six independent 16‑bit programmable counters (Intel/NEC 8254 architecture) - One 32‑bit timer (two cascaded 16‑bit counters) with a 4 MHz time base - One additional 16‑bit counter with a 4 MHz time base - On‑board crystal‑based frequency sources: 10 kHz, 100 kHz, and 1 MHz - Frequency scaling via jumpers: ×2, ÷2, ÷4 - Supports six programmable counter modes (Mode 0–5) - **Interrupt and Event Handling:** - Supports IRQ3–IRQ15 (AT bus interrupt levels) - Selectable interrupt trigger sources: Timer Pacer, Event Counter, or External Source - Event counting and periodic interrupt generation supported - **Hardware Compatibility:** - Register‑level compatibility with Advantech PCL‑720 - Breadboard area for user‑defined circuitry and prototyping - Five 20‑pin IDC connectors for I/O and counter interfacing - **Software Support:** - DOS library and utilities included - Optional Windows libraries: **ACLS‑DLL1** (for VB, VC/C++, Delphi) and **ACLS‑LVIEW** (for LabVIEW integration) - Supports programming in BASIC, C, Pascal, and Assembly - **Environmental and Mechanical:** - Operating temperature: 0 °C – 60 °C - Humidity: 0 – 90 % non‑condensing - Compact AT‑bus form factor

Hersteller: Adlink Technology Inc.

Kategorie: DIO Non-Isolated ISA

- **High‑Density I/O:** 144 TTL/DTL‑compatible digital input/output lines organized as six 24‑channel groups. - **8255 Mode 0 Emulation:** Fully emulates six industry‑standard 8255 PPIs, each providing three 8‑bit ports (PA, PB, PC). - **Buffered Circuit Design:** Ensures higher current driving capability and signal integrity. - **OPTO‑22 Compatibility:** Directly interfaces with OPTO‑22 compatible I/O modules and terminal boards. - **Programmable Interrupt Sources:** Supports multiple interrupt levels (IRQ3–15) with jumper‑selectable configuration. - **Output Status Read‑Back:** Allows software to verify output states. - **Hardware/Software Compatibility:** Fully compatible with Advantech PCL‑722. - **Compact Form Factor:** Suitable for installation in standard or compact ISA chassis. - **Software Support:** Compatible with DOS, Windows 95/98/NT, and LabVIEW environments via ADLINK’s ACLS‑DLL1 and ACLS‑LVIEW libraries. - **Flexible Address Mapping:** Selectable 96‑bit or 144‑bit operation modes to avoid I/O address conflicts. - **Tri‑State Interrupt Lines:** Enables multiple ACL‑7122 boards to share the same IRQ line. - **Industrial‑Grade Reliability:** Designed for continuous operation in industrial environments (0°C–55°C).

Hersteller: Adlink Technology Inc.

Kategorie: DIO Non-Isolated ISA

- **24‑Channel Digital I/O:** Provides 24 TTL/DTL‑compatible digital input/output lines organized as three 8‑bit ports (Port A, Port B, Port C). - **8255 Mode 0 Emulation:** Fully emulates one Intel 8255 Programmable Peripheral Interface (PPI) in Mode 0, offering flexible digital I/O control. - **Buffered Circuit Design:** Incorporates buffering for higher current drive capability and improved signal integrity. - **Interrupt Support:** Programmable interrupt handling via PC0 and PC4 lines of Port C, with selectable IRQ levels (IRQ2–IRQ7) and edge‑trigger configuration (rising/falling). - **Output Status Readback:** Allows reading back the output latch status for verification and diagnostics. - **OPTO‑22 Compatibility:** Directly interfaces with OPTO‑22 compatible I/O modules and racks (8, 16, or 24 channels). - **Software Compatibility:** Supports simple 8‑bit I/O port programming (inport/outport) and ADLINK’s ACLS‑DLL1 driver for high‑level C or Windows applications. - **Hardware Compatibility:** Drop‑in replacement for Advantech PCL‑724, ensuring seamless integration in legacy systems. - **Compact Form Factor:** 108 mm × 107 mm PCB suitable for standard ISA slots. - **Industrial Reliability:** Designed for industrial monitoring, control, and data acquisition applications.

Hersteller: Adlink Technology Inc.

Kategorie: DIO Non-Isolated ISA

- **High-Speed 16-Bit Digital I/O:** Provides 16-bit parallel digital input/output capability, enabling simultaneous handling of multiple digital signals with high precision and speed. - **Maximum Data Rate:** Supports up to 250 kBytes/s (equivalent to 125 kWords/s), allowing for rapid data transfer between the card and host system. - **Compatibility:** Fully compatible with the Metrabyte PDMA-16 interface standard, ensuring seamless integration with legacy and modern systems that utilize this protocol. - **Interrupt Support:** Configurable interrupt request (IRQ) lines from IRQ2 through IRQ7, allowing flexible system-level interrupt management and efficient CPU utilization. - **Connector Type:** Equipped with a standard 37-pin D-type connector for robust and reliable signal interfacing with external devices, sensors, and control systems. - **Compact Form Factor:** Compact PCB dimensions of 110 mm × 102 mm, suitable for installation in space-constrained environments or embedded systems. - **Bidirectional Digital Channels:** Each of the 16 channels can be configured as input or output, providing flexible digital interfacing for a wide range of applications. - **Industrial-Grade Design:** Built with high-quality components to ensure stable operation under demanding industrial conditions. - **Plug-and-Play Integration:** Designed for easy installation and configuration in compatible systems, minimizing setup time and complexity.

Hersteller: Axiom

Kategorie: DIO Non-Isolated ISA

- **48 Digital I/O Channels:** Provides 48 individually programmable digital input/output lines for versatile control and monitoring applications. - **8255 Mode 0 Emulation:** Fully emulates the Intel 8255 PPI in Mode 0, ensuring compatibility with existing software and hardware systems that rely on this standard interface. - **ISA Bus Interface:** Designed for the AT ISA bus architecture, making it suitable for legacy industrial PCs and embedded systems requiring stable and deterministic I/O performance. - **TTL-Level I/O:** Supports standard **Transistor-Transistor Logic (TTL)** voltage levels for direct interfacing with sensors, switches, relays, and other digital devices. - **Interrupt Support (IRQ2–IRQ7):** Provides interrupt-driven operation with selectable interrupt request lines (IRQ2 through IRQ7) for responsive event handling and efficient CPU utilization. - **Dual 50-Pin Connectors:** Equipped with **two 50-pin headers** for easy connection to external devices, terminal boards, or ribbon cables, simplifying wiring and integration. - **Compact Form Factor:** Measures **258 mm × 99 mm**, optimized for installation in standard ISA slots without obstructing adjacent components. - **Cross-Platform Driver Support:** Compatible with both **Windows** and **Unix** operating systems, with dedicated drivers and software libraries available for seamless integration. - **Industrial-Grade Reliability:** Built with high-quality components and PCB design standards to ensure long-term stability in demanding industrial environments.

Hersteller: Axiom

Kategorie: DIO Non-Isolated ISA

- **96 Digital I/O Channels:** Provides a total of 96 TTL-level digital input/output lines, allowing for extensive signal interfacing and control. - **8255 Mode 0 Emulation:** Fully emulates the Intel 8255 PPI in Mode 0, ensuring compatibility with existing hardware and software designed around this standard. - **Interrupt Support (IRQ2–IRQ7):** Supports interrupt-on-change functionality across IRQ2 through IRQ7, enabling responsive event-driven control and monitoring. - **Four 50-Pin Connectors:** Equipped with four standard 50-pin headers for easy connection to external devices, terminal boards, or ribbon cables. - **Cross-Platform Driver Support:** Includes driver packages for both Windows and Unix operating systems, simplifying integration into diverse computing environments. - **Compact Form Factor:** Designed with a board dimension of 335 mm × 99 mm, suitable for installation in standard industrial PC chassis or custom enclosures. - **TTL Logic Compatibility:** Operates with standard TTL voltage levels, ensuring reliable interfacing with a wide range of digital sensors, actuators, and control circuits. - **Flexible Configuration:** Each channel can be configured as input or output, providing maximum flexibility for various control and monitoring tasks. - **Industrial Reliability:** Built with high-quality components and PCB design standards to ensure long-term stability and consistent performance in demanding environments.

Hersteller: Axiom

Kategorie: DIO Non-Isolated ISA

- **96 Digital I/O Channels:** Provides a total of 96 TTL-level digital input/output lines for high-density signal interfacing. - **8255 Mode 0 Emulation:** Fully emulates the Intel 8255 PPI in Mode 0, ensuring compatibility with existing control software and hardware designed for 8255-based systems. - **ISA Bus Interface:** Designed for the AT ISA bus, allowing integration into legacy and industrial PC platforms that still utilize ISA expansion slots. - **Interrupt Support:** Supports IRQ2–IRQ15 for change-of-state interrupt generation, enabling event-driven digital input monitoring. - **Four 50-pin Connectors:** Equipped with four standard 50-pin headers for easy connection to external devices, terminal boards, or signal conditioning modules. - **Half-Size Form Factor:** Compact design suitable for systems with limited expansion space. - **Cross-Platform Driver Support:** Includes driver support for both Windows and Unix operating systems, facilitating deployment in diverse software environments. - **TTL-Level I/O:** Compatible with standard Transistor-Transistor Logic (TTL) voltage levels, ensuring reliable interfacing with a wide range of digital devices and sensors. - **Flexible Configuration:** Each group of I/O lines can be configured as input or output, allowing versatile control and monitoring setups. - **Industrial Reliability:** Designed for continuous operation in industrial automation, data acquisition, and process control applications.

Hersteller: Axiom

Kategorie: DIO Non-Isolated ISA

- **High-Density I/O:** Provides 144 digital input/output channels, enabling extensive signal interfacing within a single card footprint. - **8255 Mode 0 Emulation:** Fully emulates the Intel 8255 PPI in Mode 0, ensuring compatibility with existing systems and software designed for 8255-based I/O operations. - **TTL-Level I/O:** All channels support standard TTL logic levels, making the card suitable for direct interfacing with a wide range of digital devices, sensors, and actuators. - **Interrupt Support:** Supports IRQ2–IRQ7 for change-of-state detection, allowing the system to respond to input transitions efficiently without continuous polling. - **Multiple Connectors:** Equipped with six 50-pin connectors, facilitating organized and scalable wiring to external devices or terminal boards. - **Cross-Platform Driver Support:** Compatible with both Windows and Unix operating systems, with dedicated driver packages available for easy integration. - **Compact and Modular Design:** The 339 mm × 122 mm form factor allows installation in standard industrial enclosures or PC-based control systems. - **Industrial Reliability:** Designed for continuous operation in industrial environments, with robust electrical design and stable signal handling.

Hersteller: Axiom

Kategorie: DIO Non-Isolated ISA

- **High-Density Digital I/O:** Provides 144 digital input/output channels, enabling large-scale signal interfacing within a single ISA slot. - **8255 Mode 0 Emulation:** Fully emulates the Intel 8255 PPI in Mode 0, ensuring compatibility with existing software and hardware designed for 8255-based systems. - **TTL-Level I/O:** All channels operate at standard TTL voltage levels, suitable for direct interfacing with logic circuits, sensors, and actuators. - **Interrupt Support:** Supports IRQ2–IRQ15 for change-of-state detection, allowing event-driven input monitoring and efficient CPU utilization. - **Multiple Connectors:** Equipped with six 50-pin headers for convenient signal distribution and easy integration with external wiring harnesses or terminal boards. - **Driver Support:** Compatible with both Windows and Unix operating systems, with available driver packages and software libraries for rapid deployment. - **Industrial-Grade Design:** Built for reliability in industrial environments, with durable PCB construction and stable electrical performance. - **Legacy System Compatibility:** Designed for AT ISA bus architecture, making it ideal for upgrading or maintaining legacy control systems.

Hersteller: Axiom

Kategorie: DIO Non-Isolated ISA

- **32 Independent TTL-Level Input Channels:** Supports 32 discrete digital input points for TTL (Transistor-Transistor Logic) signals, ideal for interfacing with low-voltage logic devices and sensors. - **High-Speed Response:** Typical throughput time of 1 microsecond (1 µs), enabling rapid signal acquisition suitable for high-frequency digital systems. - **Interrupt Functionality:** Two interrupt request (IRQ) lines selectable from IRQ 2–7 or IRQ 9, allowing flexible integration with host system interrupt management. - **Standard 37-Pin D-Sub Connector:** Equipped with a 37-pin female D-type connector for robust and standardized external wiring. - **Compact Form Factor:** Board dimensions of approximately 143 mm × 107 mm, suitable for compact PC-based control systems. - **TTL-Level Input Compatibility:** Designed for 5VDC TTL logic levels, ensuring compatibility with standard digital logic circuits. - **PCI/PC Card Bus Compliance:** Fully compliant with PCI or PCMCIA bus standards, ensuring broad compatibility with industrial PCs and embedded systems. - **High Reliability and Noise Immunity:** Engineered for stable operation in industrial environments with minimal signal degradation. - **Software Support:** Compatible with CONTEC’s API-TOOL driver suite for Windows and Linux, and VI-DAQ library for LabVIEW integration. - **Industrial-Grade Design:** Built for continuous operation in automation, testing, and data acquisition systems.

Hersteller: Contec

Kategorie: DIO Non-Isolated ISA

- **64 Independent TTL-Level Input Channels:** Supports 64 discrete digital input points for TTL (Transistor-Transistor Logic) signals, ideal for interfacing with logic circuits and low-voltage digital devices. - **Standard PC Bus Compatibility:** Designed for PC/AT-compatible systems, compliant with ISA bus architecture. - **Multiple Interrupt Lines:** Supports up to four interrupt lines selectable from IRQ 3–7, 9–12, 14, and 15, allowing flexible interrupt-driven input monitoring. - **Low Power Consumption:** Operates at 5VDC with a maximum current draw of only 250mA, minimizing system power load. - **High-Density Connector:** Equipped with a 96-pin D-type female connector for compact, high-channel-count wiring. - **Compact Form Factor:** Board dimensions of 160mm × 122mm (6.3" × 4.8") allow installation in standard PC chassis. - **TTL-Level Input Compatibility:** Accepts standard 5VDC TTL logic signals, enabling direct connection to digital logic circuits without additional level conversion. - **Stable and Reliable Operation:** Designed for industrial environments with robust electrical characteristics and stable signal handling. - **Software Support:** Compatible with CONTEC’s API-TOOL driver suite for Windows and Linux, and VI-DAQ library for LabVIEW integration. - **Flexible Integration:** Can be used in conjunction with other CONTEC digital I/O boards for scalable system expansion.

Hersteller: Contec

Kategorie: DIO Non-Isolated ISA

- **High-Density I/O:** Provides 120 channels of TTL-level bi-directional digital I/O, enabling compact integration of multiple digital signals on a single PCI interface card. - **Bi-Directional Operation:** Each channel can be configured as input or output, allowing flexible adaptation to various control and monitoring applications. - **TTL Signal Compatibility:** Supports standard 5V TTL logic levels, ensuring compatibility with a wide range of digital devices and circuits. - **Interrupt Capability:** Equipped with 10 interrupt request (IRQ) lines (IRQ 2–7, 9–12, 14, 15), allowing event-driven control and efficient CPU utilization. - **Multiple Connectors:** Features five 50-pin connectors for external signal interfacing, simplifying wiring and expansion. - **Large Form Factor:** Board dimensions of 338 mm × 122 mm provide sufficient space for high channel density and stable signal routing. - **PCI Bus Interface:** Designed for standard PCI bus systems, ensuring broad compatibility with industrial PCs and embedded controllers. - **Software Support:** Compatible with CONTEC’s API-TOOL driver suite for Windows and Linux, and supports LabVIEW integration via VI-DAQ libraries. - **Industrial Reliability:** Built for continuous operation in industrial environments, with robust PCB design and high-quality connectors. - **Flexible Integration:** Ideal for applications requiring simultaneous monitoring and control of multiple digital signals, such as automation, testing, and data acquisition systems.

Hersteller: Contec

Kategorie: DIO Non-Isolated ISA

- **High-Density I/O:** Provides 144 channels of TTL-level bi-directional digital input/output, enabling large-scale signal interfacing within a single expansion slot. - **Bus Compatibility:** Designed for PC bus systems, compliant with standard PC/AT architecture. - **Interrupt Support:** Supports up to six interrupt request lines (IRQ 3–7, 9), allowing flexible event-driven control. - **Connector Configuration:** Equipped with six 50-pin connectors for external signal interfacing, supporting a wide range of cable and terminal block accessories. - **Compact Form Factor:** Board dimensions of 160 mm × 122 mm, suitable for standard PC chassis installation. - **High-Speed TTL Logic:** Operates at 5V TTL logic levels, providing fast response and compatibility with standard digital logic circuits. - **Bi-Directional Channels:** Each channel can be configured as input or output under software control, allowing dynamic reconfiguration. - **Software Support:** Compatible with CONTEC’s API-TOOL driver suite for Windows and Linux, and VI-DAQ library for LabVIEW integration. - **Industrial Reliability:** Designed for continuous operation in industrial environments, with robust PCB design and stable signal characteristics. - **Flexible Expansion:** Can be combined with other CONTEC digital I/O boards for expanded channel count or mixed signal configurations.

Hersteller: Contec

Kategorie: DIO Non-Isolated ISA

- **16 TTL-Level Inputs and 16 TTL-Level Outputs:** Provides a total of 32 digital I/O points for direct connection to TTL-compatible devices. - **Non-Isolated High-Speed I/O:** Designed for applications requiring fast response times and minimal propagation delay. - **Interrupt Capability:** All input channels can be configured as interrupt sources, allowing event-driven control. - **TTL Logic Compatibility:** Operates at standard 5VDC TTL logic levels (negative logic). - **Open Collector Outputs:** Each output channel supports up to 40mA sink current at 30VDC maximum. - **Compact Form Factor:** Standard PC expansion card dimensions of approximately 140 × 107 mm. - **Standard 37-pin D-Sub Connector:** Ensures compatibility with a wide range of industrial cables and terminal blocks. - **Software Support:** Includes license-free API-TOOL drivers for Windows and Linux, and VI-DAQ library for LabVIEW integration. - **Flexible Interrupt Assignment:** Supports two IRQ lines selectable from IRQ 3–7 or 9. - **High-Speed Response:** Input response time of approximately 200 nanoseconds and output response within 1 microsecond. - **Wide Software Ecosystem:** Compatible with CONTEC’s API-PAC(W32) and VI-DAQ for LabVIEW, simplifying integration into automation and test systems.

Hersteller: Contec

Kategorie: DIO Non-Isolated ISA

- **64‑point Digital I/O:** 32 input and 32 output channels on a single board. - **TTL‑Level Logic:** Inputs and outputs operate at standard 5 VDC TTL levels (negative logic). - **High‑Speed Response:** Input response time of 200 ns (typical), output response within 1 µs. - **Open‑Collector Outputs:** Each output can sink up to 40 mA at 30 VDC, suitable for driving LEDs, relays, or logic circuits. - **Interrupt Functionality:** All input signals can be configured as interrupt sources; four interrupt lines (IRQ 3–7, 9–12, 14, 15) are supported. - **Digital Filtering:** Software‑selectable digital filter and edge‑trigger configuration to suppress noise and chattering. - **Compact Form Factor:** 96‑pin half‑pitch connector for high‑density wiring in limited space. - **Low Power Consumption:** Operates from the PC bus 5 V supply, consuming only 250 mA (typical). - **Software Support:** Fully supported by CONTEC’s API‑TOOL driver suite for Windows and Linux, and VI‑DAQ library for LabVIEW integration. - **Compatibility:** Connector pin assignment compatible with PIO‑32/32T(PC)H and other CONTEC TTL‑level boards, simplifying system upgrades or replacements. - **Industrial Reliability:** Designed for continuous operation in industrial environments with robust PCB design and high‑quality components.

Hersteller: Contec

Kategorie: DIO Non-Isolated ISA

- **48 Bi-Directional TTL Channels:** Provides 48 programmable digital I/O channels configurable as input or output, supporting TTL-level logic (5VDC). - **Integrated Counter Functionality:** Equipped with three independent 16-bit counters (8254-2 compatible), enabling event counting, frequency measurement, and timing control. - **Interrupt Support:** Supports up to four interrupt request lines (IRQ 2–7), allowing flexible interrupt-driven control and event handling. - **High-Speed Response:** TTL-level non-isolated I/O ensures fast response times suitable for real-time control and data acquisition. - **Standard Connectors:** Features both a 30-pin and a 37-pin D-sub female connector for external signal interfacing. - **Compact Design:** Board dimensions of 187 mm × 107 mm allow easy installation in standard PC/AT expansion slots. - **Software Compatibility:** Supported by CONTEC’s API-TOOL driver suite for Windows and Linux, and compatible with LabVIEW via VI-DAQ library. - **Flexible I/O Addressing:** Occupies a 32-byte I/O address boundary, configurable via software or jumper settings. - **Industrial Reliability:** Designed for continuous operation in industrial environments, with robust PCB design and stable signal integrity. - **Comprehensive Accessory Support:** Compatible with CONTEC’s range of cables, terminal blocks, and connector sets for simplified wiring and integration.

Hersteller: Contec

Kategorie: DIO Non-Isolated ISA

- **48 Bi-Directional TTL Channels:** Provides 48 channels configurable as digital inputs or outputs, supporting flexible I/O mapping for various control and monitoring tasks. - **8255 Mode 0 Compatibility:** Fully compatible with the Intel 8255 PPI Mode 0 interface, ensuring straightforward integration with legacy and modern control systems. - **High-Speed TTL-Level Operation:** Non-isolated TTL-level I/O enables rapid signal response suitable for time-critical digital control applications. - **Interrupt Support:** Supports up to four interrupt request lines (IRQ 3–7, 9–12, 14, 15), allowing event-driven processing and efficient CPU utilization. - **Dual 50-Pin Connectors:** Equipped with two 50-pin headers for external signal interfacing, compatible with CONTEC’s standard cable and terminal block accessories. - **Compact ISA Form Factor:** Designed for standard ISA slots, with a board size of 160 mm × 122 mm, suitable for industrial PCs and embedded systems. - **Flexible I/O Drive Capability:** Output circuits support both source and sink current modes, enabling direct interfacing with a wide range of TTL-compatible devices. - **Software Support:** Compatible with CONTEC’s API-PAC(W32) driver library for Windows and Linux, providing easy integration into custom applications and third-party environments such as LabVIEW.

Hersteller: Contec

Kategorie: DIO Non-Isolated ISA

- **48 Bi-directional TTL Channels:** Provides 48 channels of digital I/O that can be configured as input or output, allowing flexible signal control and monitoring. - **TTL Logic Compatibility:** Supports standard TTL voltage levels, ensuring compatibility with a wide range of digital devices, sensors, and controllers. - **Interrupt Support:** Offers 4 interrupt request lines (IRQ 3–7/9), enabling event-driven control and efficient CPU utilization. - **Dual Connector Interface:** Equipped with both a 30-pin and a 37-pin D-type female connector for versatile wiring and system integration. - **Compact Form Factor:** Dimensions of 187 mm × 107 mm allow installation in standard PC expansion slots without occupying excessive space. - **High Reliability:** Designed for stable operation in industrial environments, with robust electrical characteristics and durable connectors. - **PC Bus Compatibility:** Fully compatible with standard PC bus architectures, ensuring easy integration into existing systems. - **Flexible I/O Configuration:** Each channel can be individually programmed for input or output, supporting dynamic reconfiguration for complex control tasks. - **Interrupt-driven Operation:** Enables real-time response to external signals, suitable for automation, testing, and process control applications. - **Industrial-grade Design:** Built to meet industrial standards for signal integrity, noise immunity, and long-term reliability.

Hersteller: Contec

Kategorie: DIO Non-Isolated ISA

- **96-Channel TTL-Level Bi-Directional I/O:** Provides 96 digital I/O points configurable as input or output, supporting TTL logic levels (5VDC). - **High-Speed Response:** Typical response time in the sub-microsecond range, suitable for high-speed digital control and monitoring. - **PCI Bus Interface:** Fully compliant with the PCI bus standard (32-bit, 33MHz, 5V or 3.3V signaling). - **Compact Form Factor:** Board dimensions approximately 340mm × 107mm, optimized for standard PC chassis installation. - **Four 30-Pin Connectors:** External I/O connections are provided via four 30-pin connectors, enabling easy integration with external devices and terminal blocks. - **Interrupt Support:** Supports IRQ levels 2–7, allowing event-driven control and efficient CPU utilization. - **Software Support:** Compatible with CONTEC’s API-TOOL driver suite for Windows and Linux, and VI-DAQ for LabVIEW integration. - **Flexible Configuration:** Each channel can be individually configured as input or output through software control. - **Industrial Reliability:** Designed for continuous operation in industrial environments, with robust PCB design and high signal integrity. - **Compatibility:** Works with CONTEC’s accessory cables and terminal blocks (e.g., PCB96W, PCB96WS) for simplified wiring and system expansion.

Hersteller: Contec

Kategorie: DIO Non-Isolated ISA

- **32 Independent Digital Output Channels:** Provides 32 discrete TTL-level output lines for controlling external devices, actuators, or logic circuits. - **High-Speed Output Performance:** Achieves a **throughput time of 200 ns**, enabling rapid signal switching and precise timing control suitable for high-speed automation and test systems. - **TTL-Level Output:** Outputs conform to **Transistor-Transistor Logic (TTL)** voltage levels, ensuring compatibility with standard digital logic circuits and devices. - **Standard 37-Pin D-Type Female Connector:** Facilitates easy connection to external equipment, terminal blocks, or custom wiring harnesses. - **Compact PCB Design:** With dimensions of **140 mm × 107 mm**, the card fits efficiently into standard PC expansion slots or embedded enclosures. - **Reliable Industrial Design:** Manufactured by Contec, known for robust, high-quality industrial I/O solutions, ensuring long-term reliability and stable operation. - **PC-Compatible Interface:** Designed for integration into PC-based control systems, supporting a wide range of industrial automation and data acquisition applications. - **Low-Latency Digital Output:** Optimized for applications requiring deterministic timing and minimal signal delay. - **Flexible Integration:** Suitable for use in custom control panels, test benches, or embedded systems requiring multiple digital outputs.

Hersteller: Contec

Kategorie: DIO Non-Isolated ISA

- **64-Channel TTL Digital Output:** Provides 64 discrete output lines for digital control, each operating at standard TTL logic levels (0–5 V). - **TTL-Level Output Compatibility:** Outputs conform to **Transistor-Transistor Logic (TTL)** voltage levels, ensuring compatibility with a wide range of digital devices, sensors, and actuators. - **Low Power Output Capability:** Each output channel supports a maximum current of **250 mA at 5 VDC**, suitable for driving LEDs, relays (through driver circuits), and logic-level control inputs. - **High-Density Connector Interface:** Equipped with a **96-pin D-type female connector**, allowing compact and organized wiring for all 64 channels. - **Compact PCB Design:** The card measures **160 mm × 122 mm**, enabling easy installation in standard PC or industrial chassis. - **PC-Compatible Interface:** Designed for integration with PC-based control systems, supporting direct digital output control from host software. - **Industrial-Grade Reliability:** Manufactured by Contec, known for robust, high-quality industrial I/O solutions with stable performance and long operational life. - **Flexible Integration:** Suitable for use in custom control panels, automation racks, or embedded systems requiring multiple digital outputs.

Hersteller: Contec

Kategorie: DIO Non-Isolated ISA