The FTC‑6011 provides long‑distance serial‑to‑fiber conversion with advanced protection features and automatic interface optimization. Key capabilities include: • Multi‑protocol serial support: RS‑232, RS‑422, and RS‑485 (2‑wire and 4‑wire) • Auto‑Detect & Switch for RS‑422/485 interfaces • SUNIX AHDC/CS™ Auto Hardware Direction Control / Carrier Sense for RS‑485 signaling • Auto baud rate detection supporting dynamic environments and device changes • Fiber communication range up to 80 km depending on fiber type • Surge protection: 600 W power surge protection • 15 kV embedded ESD protection • 2.5 kV optical isolation • Redundant dual‑input power system with reverse polarity protection • Aluminum IP30 industrial enclosure designed for vibration, shock, and extreme temperature resistance • DIN rail and wall‑mount installation options • Wide operating temperature range (-20 to 75°C, extended -40 to 80°C per series specifications)

Hersteller: Sunix

Kategorie: Industrial Media Converter

• Converts RS‑485 serial communication to fiber optic transmission • Compatible with standard industrial multi‑mode (2 km) and single‑mode (30 km or up to 80 km extended) fiber • Auto baud rate detection supporting speeds up to 460.8 kbps for RS‑485 communication • Automatic RTS Direction Control via SUNIX AHDC/CS technology for 2‑wire RS‑485 • Embedded 15 kV ESD protection and 600 W surge protection for improved durability • 2.5 kV optical isolation safeguarding connected systems from ground loops and electrical noise • Redundant power input system supporting 12–48 V DC with reverse polarity protection • Rugged, shock‑proof alloy/ABS casing with IP30 protection level • Designed for extreme environments: operational temperature −20°C to 75°C • DIN rail and wall‑mount compatibility for flexible installation • Low power consumption below 2.4 W (approx. 200 mA @ 12 V)

Hersteller: Sunix

Kategorie: Industrial Media Converter

• Converts 10/100/1000Base‑T(X) copper Ethernet to 1000Base‑SX/LX fiber • Supports multimode (50/125 μm, up to 2 km) and single‑mode fiber (9/125 μm, up to 30 km) • Rugged industrial design, IP30 aluminum enclosure • Supports redundant dual power inputs (12–48 VDC) with reverse power protection • Integrated alarm relay output for fault signaling • Surge protection, optical isolation (system‑level), high immunity to ESD and voltage disturbances • DIN‑rail and wall‑mount installation options • Supports extended operating temperatures from −40 °C to 80 °C • Implements SUNIX AHDC/CS™ technologies within associated converter families (direction control features for serial products; general platform robustness and auto‑sense logic) • High EMI/ESD resilience, meeting industrial EMC standards • Compact industrial form factor (30 × 68.5 × 105 mm)

Hersteller: Sunix

Kategorie: Industrial Media Converter

The FTL‑1218H‑MMC integrates multiple industrial‑grade features, including: • 10/100Base‑TX to 100Base‑FX optical conversion using SC multi‑mode fiber. • Multi‑mode fiber support for 50/125 µm cable with standard transmission distances up to 2 km. • Rugged metal IP30‑rated enclosure suitable for harsh industrial environments. • Dual power inputs supporting 12–48 VDC via terminal block and a 12 VDC jack, ensuring redundancy and operational reliability. • Built‑in reverse power protection to prevent damage from incorrect wiring. • Configurable alarm relay output for event signaling and remote monitoring. • DIN‑rail and wall‑mounting support for flexible industrial installation. • Extended industrial protections including ESD protection, surge resistance, optical isolation characteristics, and mechanical shock and vibration resistance according to IEC standards. • Operating temperature range of 0°C to +60°C, supporting standard industrial temperature environments. • Compact design optimized for dense cabinet installations.

Hersteller: Sunix

Kategorie: Industrial Media Converter

• Converts 10/100Base‑TX Ethernet to 100Base‑FX fiber. • Multimode fiber support using 50/125 µm cable. • Standard SC fiber port for 100Base‑FX links. • Designed for industrial applications requiring high immunity and long‑distance communication. • Extended operating temperature range from ‑40°C to +85°C. • DIN rail mountable metal IP30 enclosure for harsh environments. • Dual redundant power inputs (12–48 VDC terminal block and 12 VDC DC jack). • Configurable relay alarm output for fault monitoring. • Integrated surge protection, optical isolation protection, and reverse power protection. • Link Fault Signaling enables systems to react to line loss or interruptions. • Auto negotiation and compatibility with 10/100 Mbps copper Ethernet. • High immunity against EMI/RFI disruptions common in industrial areas. • Compact industrial form factor suited for panels, cabinets, and field deployments.

Hersteller: Sunix

Kategorie: Industrial Media Converter

• Converts 10/100Base‑TX Ethernet to 100Base‑FX fiber • Single‑mode fiber 9/125 μm with SC connector • Transmission distance up to 40 km • Industrial‑grade aluminum enclosure with IP30 protection • Dual redundant power input: 12–48 VDC on terminal block and 12 VDC DC jack • Low power consumption: 1 A @ 12 VDC • Operating temperature: 0°C to +60°C (standard industrial rating) • Integrated alarm relay output (configurable) • DIN‑rail and wall‑mount options • RJ45 Ethernet port and fiber SC port • High EMI/ESD protection levels • Reverse power protection • Surge protection, optical isolation, and enhanced electrical immunity • Supports Link Fault Signaling for network event detection • Compact form factor: 30 × 68.5 × 105 mm • Rugged metal chassis designed for continuous industrial operation • Sunix AHDC/CS Technology (Auto Hardware Direction Control/Carrier Sense) applicable across the product line • Designed for long‑distance, high‑integrity fiber communication in harsh environments

Hersteller: Sunix

Kategorie: Industrial Media Converter

• Converts 10/100Base‑TX (copper) to 100Base‑FX (fiber) • Single‑mode fiber operation using 9/125 µm fiber with SC connector • Fiber distance support up to 40 km (product description) or typical SUNIX standard single‑mode specification up to 30 km depending on installation • Industrial extended‑temperature range: -40°C to +85°C • Designed for harsh industrial environments with shock‑proof, corrosion‑resistant IP30 aluminum housing • Surge protection, optical isolation protection, reverse power protection • Dual redundant power input: 12–48 VDC via terminal block and 12 VDC jack • Current consumption 1A @ 12 VDC • Automatically detects serial baud rates (relevant to SUNIX media converter technology family) • Configurable alarm relay output for fault notification • Link Fault Signaling support enabling network applications to react to fiber or copper link failures • DIN rail and wall mount options • High immunity against electromagnetic interference and ground potential differences • Auto-detection and switching technologies derived from SUNIX RS-422/485 mechanisms integrated into product family design • Rigid mechanical construction for high vibration, impact, and extreme temperature operational reliability • Packet length supported: 64 to 1522 bytes • Benefits of fiber optics: longer distance extension, higher bandwidth, immunity, enhanced data integrity • EMI/ESD protection integrated into communication circuitry • Designed for continuous 24/7 industrial operation

Hersteller: Sunix

Kategorie: Industrial Media Converter

Industrial grade RS-232 to Fiber SC/ST media converter, auto baud rate detection, up to 460,8kbps, 15kV embedded ESD surge protection, 12..48V DC

Hersteller: Sunix

Kategorie: Industrial Media Converter

Optical bypass switch with 4*FX duplex MM LC connector, networks ports and monitor ports, dual 12..48VDC in, ~2,7W, 26,1*94,9*144,3mm, ~0,405kg, Oring

Hersteller: Oring

Kategorie: Industrial Media Converter

- **Optical Bypass Functionality:** Supports automatic optical bypass switching for 2-port duplex or 4-port simplex fiber connections, ensuring uninterrupted network operation during power loss or device failure. - **High-Speed Compatibility:** Compatible with 100 Mbps, 1 Gbps, and 10 Gbps fiber Ethernet networks, making it suitable for a wide range of industrial and enterprise applications. - **Single-Mode Fiber Support:** Equipped with 4×LC duplex single-mode connectors (9/125 µm fiber), supporting wavelengths from 1260 nm to 1570 nm. - **Fast Switching Time:** Bypass switching time is less than 10 milliseconds, minimizing network downtime during transitions between normal and bypass modes. - **Low Insertion Loss:** Typical insertion loss of 1.2 dB (maximum 1.6 dB), ensuring minimal signal degradation and maintaining high data throughput. - **Dual Power Inputs:** Redundant 12–48 VDC power inputs via both DC jack and 4-pin terminal block, providing power reliability and flexibility in industrial installations. - **Relay Output for Power Failure Warning:** Integrated relay output (1A @ 24VDC) for external alarm or monitoring systems to indicate power failure conditions. - **Rugged Industrial Design:** IP-30-rated metal housing for protection against dust and mechanical impact, suitable for DIN-rail or wall-mounted installation. - **Wide Operating Temperature Range:** Designed for operation in extreme environments, with a temperature range from -20°C to +70°C. - **Comprehensive LED Indicators:** Includes Power (P1, P2), Normal Mode, and Fault LEDs for clear visual status monitoring. - **Compact and Lightweight:** Slim form factor (26.1 × 94.9 × 144.3 mm) and lightweight (405 g) design for easy integration into control cabinets or network racks.

Hersteller: Oring

Kategorie: Industrial Media Converter

- **Gigabit Ethernet Conversion:** Converts 10/100/1000Base-T(X) copper Ethernet to 1000Base-X fiber Ethernet. - **Multi-Mode Fiber Support:** Equipped with a 1000Base-SX multi-mode fiber port (850 nm wavelength, SC connector) supporting transmission distances up to 550 meters. - **Auto-Negotiation and Auto-MDI/MDI-X:** Automatically detects link speed and cable type for simplified installation. - **Dual Power Inputs:** Redundant 12–48 VDC power inputs via a 6-pin terminal block ensure continuous operation even if one power source fails. - **Relay Output Alarm:** Configurable relay output (1A at 24 VDC) for power failure or fault condition notification. - **Rugged Industrial Design:** IP-30 rated metal enclosure for protection against dust and mechanical impact. - **Wide Operating Temperature Range:** Designed for extreme environments, operating from -40°C to +70°C. - **DIN-Rail and Wall Mounting:** Flexible installation options for industrial control cabinets or panels. - **Low Power Consumption:** Typical power usage of only 3.5 W for energy-efficient operation. - **Comprehensive LED Indicators:** Provides clear visual status for power, link/activity, and fault conditions. - **High Reliability:** Designed for continuous operation in mission-critical industrial networks. - **Standards Compliance:** Fully compliant with IEEE 802.3 Ethernet standards and international EMC and safety regulations. - **5-Year Warranty:** Long-term reliability backed by ORing’s extended warranty coverage.

Hersteller: Oring

Kategorie: Industrial Media Converter

Gigabit 10/100/1000Base TX Ethernet to 1000Base FX Fiber SC media converter, Single Mode 9/125µm up to 40km, serial port RJ45, Alarm Relay out configurable, 12..48VDC in, dual power input, DIN rail mountable, extended operating temperature -40°..+70°C, 33*144,5*95mm, ~400gr, ~3,5W, Oring

Hersteller: Oring

Kategorie: Industrial Media Converter

- Provides media conversion between 10/100/1000Base‑T(X) copper and 1000Base‑X fiber (via SFP module). - Auto‑negotiation and auto‑MDI/MDI‑X for the copper Ethernet port. - Supports multi‑mode or single‑mode fiber through compatible SFP transceivers. - Wide input power range: dual redundant 12–48 VDC via 6‑pin terminal block. - Power alarm relay output rated 1 A at 24 VDC, with DIP‑switch‑selectable alarm behavior. - Rugged IP‑30 metal enclosure designed for industrial environments. - Slim‑type model with compact form factor for dense cabinet installations. - Extended operating temperature specification: – Standard series spec: −10 to 60 °C – Extended series spec: −40 to 70 °C (per updated datasheet). - DIN‑rail and wall‑mount installation supported. - Low power consumption (~3.5 W). - Supports jumbo frames up to 10240 bytes (per full specs). - FCC Class A, EN55022 Class A EMI compliance; EN61000‑4‑2/3/4/5/6/8/11 EMC immunity certification. - Reverse polarity protection and overload current protection included.

Hersteller: Oring

Kategorie: Industrial Media Converter

• One 10/100/1000Base‑T(X) auto‑negotiation RJ‑45 copper port with auto‑MDI/MDI‑X • One 100/1000Base‑X SFP fiber port supporting a wide range of ORing SFP transceivers • Supports multimode fiber (50/125 µm) up to 2 km and single‑mode fiber (9/125 µm) up to 120 km (dependent on SFP module) • Jumbo frame support up to 9K bytes (Gigabit mode only) • LFP (Link Fault Pass‑through) with DIP‑switch enable/disable for enhanced link management • Configurable alarm relay output (1A at 24 VDC capacity) for fault signaling • DIP‑switch configuration for: LFP enable/disable, FX mode selection, relay trigger settings, power input monitoring • Dual redundant 12–48 VDC power inputs with reverse‑polarity and overload protection • Industrial hardened design with wide operating temperature −40°C to +75°C • IP‑30 metal enclosure, DIN‑rail or wall‑mount installation • Low power consumption (~4 W) • Compact slim housing: 40 × 70 × 95 mm • MTBF over 1.1 million hours • 5‑year warranty • Designed for rugged environments, industrial automation, transportation, and outdoor applications

Hersteller: Oring

Kategorie: Industrial Media Converter

• Converts 100/1000Base‑T(X) RJ45 Ethernet to 100/1000Base‑X SFP fiber • Auto‑negotiation and auto‑MDI/MDIX detection on the copper Ethernet port • Supports both Fast Ethernet (100 Mbps) and Gigabit Ethernet (1000 Mbps) speeds • SFP port speed selectable through dual DIP‑switch configuration (100 Mbps / 1000 Mbps) • Wide operational temperature range from −40°C to +70°C for extreme industrial environments • Wide dual DC input range from 12 to 48 VDC with reverse polarity and overload protection • IP‑30 metal enclosure for enhanced robustness and EMI resistance • DIN‑rail and wall‑mount installation options included • LED indicators for power status, link/activity, and speed • Supports multimode fiber (50/125 µm) distances up to 2 km and single‑mode (9/125 µm) distances up to 120 km (depending on SFP module) • Low power consumption (~3.5–3.6 W typical) • Industrial certifications for EMI, EMS, shock, vibration, and free‑fall compliance • 5‑year manufacturer warranty

Hersteller: Oring

Kategorie: Industrial Media Converter

The IGPMC‑111GP incorporates numerous high‑availability and industrial‑performance functions: • One 10/100/1000Base‑T(X) copper Ethernet port with auto‑negotiation and auto‑MDI/MDI‑X capability. • One 100/1000Base‑X fiber SFP port compatible with both 100 Mbps and 1 Gbps SFP transceivers. • IEEE 802.3at PoE P.S.E. compliant, supporting up to 30 W output per port for powering remote PD devices. • Jumbo Frame support up to 9K bytes in Gigabit mode. • Full LFP (Link Fault Pass‑Through) functionality to improve fault detection and system responsiveness. • DIP‑switch configurable options for power failure detection, LFP control, fiber speed mode selection, and PoE shutdown behavior. • Relay output alarm for system warnings, supporting 1A at 24 VDC. • Wide dual power input 50–57 VDC for redundancy. • Rugged IP‑30 metal enclosure suitable for industrial environments. • Operating temperature range ‑40°C to 75°C, suitable for extreme climates. • DIN‑rail and wall‑mount mechanical installation options. • High mean time between failures (MTBF) of 1,116,093 hours. • Five‑year manufacturer warranty.

Hersteller: Oring

Kategorie: Industrial Media Converter

• Converts 2×10/100Base‑T(X) copper Ethernet ports to 1×100Base‑FX multimode fiber port via SC connector • Multimode fiber operation at 1310 nm wavelength with transmission distance up to 2 km • Supports auto-negotiation and auto‑MDI/MDI‑X on 10/100Base‑T(X) ports • Two RJ45 copper ports provided to optimize port usage in industrial networks • Rugged IP‑30 metal housing suitable for harsh environments • Extended operating temperature range: standard models −10°C to +60°C; T‑models −40°C to +70°C • Alarm relay output (configurable) supporting system fault notification • Dual DC power input providing redundancy, 9–30 VDC • Low power consumption (~4.5 W typical) • Designed for DIN‑rail mounting for simplified industrial deployment • 5‑year warranty reflecting long‑term reliability • Industrial‑grade stability meeting the requirements of factory automation, transportation, utilities, and remote communication systems

Hersteller: Oring

Kategorie: Industrial Media Converter

2*10/100Base TX Ethernet to 100Base FX Fiber SC media converter, Multi Mode 2km 1310nm, SC connector, Alarm Relay out configurable, 9..30VDC in, dual power input, DIN rail mountable, extended operating temperature -40°..+75°C, 88*102*24mm, ~300gr, ~4,5W, Oring

Hersteller: Oring

Kategorie: Industrial Media Converter

• Copper‑to‑fiber media conversion between 10/100Base‑T(X) and 100Base‑FX • Two 10/100Base‑T(X) RJ45 ports, allowing reduced copper port usage • Single‑mode 100Base‑FX fiber interface (SC connector, 1550 nm) • Supports long‑distance fiber communication up to 30 km • Auto‑negotiation support on all RJ45 copper ports • Auto‑MDI/MDI‑X support for simplified installation • Industrial IP‑30 hardened metal housing • Dual power input (9–30 VDC) with redundant power support • Configurable alarm relay output for system or link failure notifications • DIN‑rail mountable compact housing • Extended operating temperature for harsh environments • Low power consumption (~4.5 W) • Reliable non‑managed operation for mission‑critical industrial networks

Hersteller: Oring

Kategorie: Industrial Media Converter

• Converts **2× 10/100Base‑T(X)** Ethernet ports to **1× 100Base‑FX** fiber port • Supports **single‑mode** fiber with **SC connector**, **1550 nm** wavelength, up to **30 km** transmission distance • **Auto‑negotiation** and **auto‑MDI/MDI‑X** on all copper ports • Extended temperature rating: **–40°C to +75°C** • **IP‑30** rugged metal housing for industrial reliability • **Alarm relay output** (configurable) for event notifications • **Dual redundant DC power input** (9–30 VDC) for high availability • **Low power consumption** (~4.5 W) and lightweight (~300 g) • **DIN‑rail mountable** industrial form factor • Designed for high‑reliability deployment in demanding environments such as transportation, factory automation, utility networks, and critical infrastructure

Hersteller: Oring

Kategorie: Industrial Media Converter

, etc.) even though they technically count as formatting? Please choose one: 1. Plain-text summary with no formatting at all (just line breaks, bullet lists allowed) 2. Structured summary with the exact numbered headings you requested

Hersteller: Oring

Kategorie: Industrial Media Converter

1*10/100Base TX Ethernet to 100Base FX SC Fiber converter, Alarm Relay out configurable, 9..30VDC in, dual power input, DIN rail mountable, extended operating temperature -40°..+75°C, ~300gr, ~4,5W, Oring

Hersteller: Oring

Kategorie: Industrial Media Converter

1*10/100Base TX Ethernet to SFP100 converter, Alarm Relay out configurable, 9..30VDC in, dual power input, DIN rail mountable, extended operating temperature -40°..+75°C, ~300gr, ~4,5W, Oring

Hersteller: Oring

Kategorie: Industrial Media Converter

• Two 10/100Base‑T(X) RJ45 ports with auto‑negotiation and auto‑MDI/MDI‑X for flexible copper connectivity. • One 100Base‑FX multimode fiber port (2 km, 1310 nm, SC connector) enabling long‑distance fiber extensions. • Slim, mini‑type industrial form factor optimized for compact control cabinets and DIN‑rail installations. • Rugged IP‑30 metal enclosure that protects against environmental contamination, EMI exposure, and mechanical stress. • Extended operating temperature capability from ‑40°C to +75°C (variant specification) for deployment in outdoor or unconditioned spaces. • Dual redundant DC power inputs with 9–30 VDC (or 12–48 VDC by model spec) supporting uninterrupted operation and failover redundancy. • Built‑in alarm relay output for alerting on power status events. • Low power consumption around 4.5 W for energy‑efficient operation. • High reliability with overload current protection and reverse polarity protection. • Wall‑mount and DIN‑rail mounting supported. • Long-term industrial warranty (5 years).

Hersteller: Oring

Kategorie: Industrial Media Converter

2*10/100Base TX Ethernet to 100Base FX Fiber SC media converter, Single Mode 30km 1550nm, SC connector, Alarm Relay out configurable, 9..30VDC in, dual power input, DIN rail mountable, extended operating temperature -40°..+75°C, ~300gr, ~4,5W, Oring

Hersteller: Oring

Kategorie: Industrial Media Converter