- **Dedicated for DMS/Strain-Gage Full Bridge Sensors:** Designed to interface directly with full-bridge strain-gage transducers, load cells, and pressure sensors. - **Excitation Supply:** Provides a stable **+10 V excitation voltage** to power the connected bridge circuit, ensuring consistent sensor performance and linearity. - **Input Sensitivity:** Optimized for sensors with **3 mV/V** nominal output sensitivity, allowing accurate measurement of mechanical strain, load, or pressure. - **Bridge Resistance Range:** Compatible with bridge impedances from **300 Ω to 10 kΩ**, covering a wide range of industrial and laboratory-grade transducers. - **High Bandwidth:** Operates with a signal bandwidth up to **10 kHz**, enabling dynamic measurement of rapidly changing mechanical signals. - **Isolated Output:** Provides a **±5 V analog output** that is galvanically isolated from the input and system ground, minimizing ground loops and electrical interference. - **Compact 5B Form Factor:** Conforms to the 5B module standard, allowing plug-in installation into 5B backplanes or carriers. - **High Common-Mode Rejection:** Ensures accurate signal measurement even in electrically noisy environments. - **Rugged and Reliable:** Designed for industrial environments with robust electrical isolation and long-term stability. - **Ease of Integration:** Compatible with standard 5B backplanes, data acquisition systems, and signal conditioning racks.

Hersteller: Keine Kategorie

Kategorie: Signalkonditionierung 5B Module

- **Dedicated for DMS / Strain Gauge Half-Bridge Sensors:** Optimized for half-bridge configurations with 3 mV/V sensitivity. - **Integrated Excitation Supply:** Provides a regulated **+10 V excitation voltage** to the connected bridge sensor, ensuring stable and accurate measurement. - **Wide Bridge Resistance Range:** Compatible with bridge resistances between **300 Ω and 10 kΩ**, accommodating a broad range of strain gauge types. - **High Bandwidth:** Operates with a **10 kHz bandwidth**, enabling accurate dynamic measurements and fast response to changing loads or strains. - **Standardized Output Signal:** Delivers a **±5 V analog output**, directly compatible with most analog input modules, DAQ systems, and control interfaces. - **Electrical Isolation:** Typical of 5B modules, providing galvanic isolation between input, output, and power supply to prevent ground loops and improve measurement integrity. - **Compact Modular Design:** Fits standard 5B backplanes and carriers, allowing easy integration into modular signal conditioning systems. - **High Accuracy and Stability:** Designed for precision measurement applications requiring low noise, low drift, and high linearity. - **Plug-and-Play Compatibility:** Fully compatible with the 5B series ecosystem, including backplanes, mounting racks, and data acquisition interfaces.

Hersteller: Keine Kategorie

Kategorie: Signalkonditionierung 5B Module

- **Dedicated for Full-Bridge Strain Gauge Sensors:** Optimized for DMS (strain gauge) full-bridge configurations with a nominal sensitivity of **2 mV/V**. - **Integrated Excitation Supply:** Provides a stable **+10 V excitation voltage** to power the strain gauge bridge, ensuring consistent and accurate measurement performance. - **Wide Bridge Resistance Compatibility:** Supports bridge resistances from **300 Ω to 10 kΩ**, accommodating a broad range of strain gauge types and applications. - **High Bandwidth:** Operates with a **10 kHz bandwidth**, enabling accurate dynamic measurements and fast response for transient or vibration monitoring. - **Standardized Output Signal:** Delivers a **±5 V analog output**, compatible with most analog input channels, data acquisition systems, and control interfaces. - **Electrical Isolation:** Provides galvanic isolation between input, output, and power supply, protecting downstream electronics from ground loops and electrical noise. - **Compact Modular Design:** Fits into standard 5B backplanes or carriers, allowing easy installation, replacement, and system expansion. - **High Accuracy and Stability:** Designed for precision measurement applications requiring low noise, high linearity, and long-term stability. - **Industrial-Grade Reliability:** Built for continuous operation in demanding environments, with robust construction and high immunity to interference.

Hersteller: Keine Kategorie

Kategorie: Signalkonditionierung 5B Module

- **Voltage-to-Current Conversion:** Converts a 0–5 V analog input signal into a proportional 4–20 mA current output, suitable for standard process control loops. - **High Accuracy and Linearity:** Ensures precise signal representation with minimal nonlinearity and drift over temperature and time. - **Galvanic Isolation:** Provides 1500 V rms isolation between input, output, and power, protecting connected equipment from ground loops and electrical interference. - **Compact Modular Design:** Fits into standard 5B Series backplanes, allowing flexible configuration and easy maintenance. - **Wide Operating Range:** Designed for industrial environments with extended temperature tolerance and robust electrical performance. - **Plug-and-Play Integration:** Compatible with 5B Series mounting racks and backplanes, simplifying installation and system expansion. - **Low Power Consumption:** Optimized for efficient operation in multi-channel systems. - **High Common-Mode Rejection:** Reduces noise and interference in electrically noisy environments. - **Factory-Calibrated:** Each module is pre-calibrated for its specified input/output range, minimizing setup time. - **DIN Rail and Panel Mount Options:** Supports multiple installation configurations for flexible deployment.

Hersteller: Keine Kategorie

Kategorie: Signalkonditionierung 5B Module

- **Voltage-to-Current Conversion:** Converts a ±5 V analog input signal into a proportional 4–20 mA output current. - **High Accuracy and Linearity:** Ensures precise signal representation with minimal nonlinearity and drift. - **3000 V RMS Isolation:** Provides galvanic isolation between input and output, protecting downstream equipment and ensuring signal integrity in noisy environments. - **Wide Operating Temperature Range:** Designed for industrial environments, typically operating from –40 °C to +85 °C. - **Compact Plug-In Module:** Fits into standard 5B Series backplanes or mounting racks, simplifying installation and maintenance. - **Low Power Consumption:** Optimized for efficient operation in multi-channel systems. - **Overrange Protection:** Protects input circuitry from accidental overvoltage conditions. - **Factory-Calibrated:** Each module is pre-calibrated for its specified input/output range, minimizing setup time. - **Compatibility:** Fully compatible with other 5B Series modules and backplanes, enabling mixed-signal configurations. - **High Common-Mode Rejection Ratio (CMRR):** Ensures accurate signal conversion even in the presence of common-mode noise.

Hersteller: Keine Kategorie

Kategorie: Signalkonditionierung 5B Module

- **Signal Conversion:** Converts a 0–5 V analog input signal into a 0–20 mA current output. - **High Accuracy:** Designed for precise signal conditioning with minimal linearity error and low drift. - **Galvanic Isolation:** Provides 1500 V rms (typical) isolation between input, output, and power, protecting connected equipment from ground loops and electrical noise. - **Compact Modular Design:** Standard 5B form factor for easy integration into backplanes or DIN-rail carriers. - **Wide Operating Range:** Supports industrial temperature ranges and stable operation under varying environmental conditions. - **Plug-and-Play Compatibility:** Fully compatible with 5B backplanes, carriers, and data acquisition systems. - **Low Power Consumption:** Efficient design suitable for multi-channel installations. - **High Common-Mode Rejection:** Ensures accurate signal transmission even in electrically noisy environments. - **Factory-Calibrated:** Pre-calibrated for specified input/output ranges, minimizing setup time. - **Rugged Construction:** Encapsulated module for protection against vibration, humidity, and dust.

Hersteller: Keine Kategorie

Kategorie: Signalkonditionierung 5B Module

- **Voltage-to-Current Conversion:** Converts a ±5 V analog input signal into a proportional 0–20 mA current output. - **High Accuracy and Linearity:** Designed for precise signal conditioning with minimal nonlinearity and drift. - **Electrical Isolation:** Provides 1500 V rms isolation between input, output, and power, protecting downstream equipment and ensuring signal integrity. - **Compact Modular Design:** Standard 5B Series form factor for easy installation in backplanes or DIN-rail-mounted carriers. - **Wide Compatibility:** Interfaces seamlessly with data acquisition systems, PLCs, and distributed control systems (DCS). - **Low Noise and High Stability:** Incorporates advanced filtering and shielding to minimize noise pickup and maintain stable operation in electrically noisy environments. - **Factory-Calibrated:** Each module is factory-calibrated for its specified input and output ranges, reducing setup time and ensuring consistent performance. - **Plug-and-Play Integration:** Designed for use with 5B Series backplanes, allowing quick module replacement and system expansion. - **Rugged Industrial Construction:** Built to operate reliably in demanding industrial environments with wide temperature tolerance and robust mechanical design.

Hersteller: Keine Kategorie

Kategorie: Signalkonditionierung 5B Module

- **Wide Bandwidth Design:** Optimized for high-frequency signal conditioning, enabling accurate transmission of dynamic or rapidly changing analog signals. - **Input Range:** ±10 mV differential input range, ideal for low-level sensor or transducer signals. - **Output Range:** ±5 V analog output, compatible with standard data acquisition (DAQ) systems and analog input modules. - **High Accuracy and Linearity:** Provides precise signal amplification with minimal distortion or drift. - **Galvanic Isolation:** Input-to-output and power isolation to eliminate ground loops and protect downstream equipment. - **Compact Modular Form Factor:** Standard 5B Series plug-in module design for easy installation and replacement. - **Low Noise Performance:** Engineered for low input noise and high signal-to-noise ratio (SNR). - **Rugged Industrial Design:** Operates reliably in harsh environments with wide temperature tolerance and robust mechanical construction. - **Compatibility:** Fully compatible with 5B Series backplanes, carriers, and mounting systems. - **Ease of Integration:** Standardized pinout and mechanical interface for seamless integration into existing 5B-based systems.

Hersteller: Keine Kategorie

Kategorie: Signalkonditionierung 5B Module

- **Wide Bandwidth Performance:** Designed for high-frequency analog signals, the 5B41 offers wide-band operation suitable for dynamic signal measurement and conditioning. - **Input/Output Range:** Accepts a **±1 V input** and provides a **±5 V output**, enabling signal amplification by a factor of 5. - **High Linearity and Accuracy:** Ensures precise signal reproduction with minimal distortion and low nonlinearity across the full input range. - **Electrical Isolation:** Provides **1500 V rms isolation** between input, output, and power, protecting downstream equipment and reducing ground loop interference. - **Compact Plug-In Module:** Fits into standard 5B Series backplanes and carriers, allowing modular configuration and easy replacement. - **High Common-Mode Rejection:** Excellent CMRR performance ensures accurate measurement even in noisy industrial environments. - **Low Noise Design:** Optimized internal circuitry minimizes noise contribution, preserving signal integrity. - **Wide Operating Temperature Range:** Suitable for harsh environments, typically operating from **–40°C to +85°C**. - **Compatibility:** Fully compatible with 5B Series backplanes, mounting racks, and data acquisition systems. - **Factory Calibrated:** Each module is factory calibrated for its specified input/output range, ensuring out-of-the-box accuracy.

Hersteller: Keine Kategorie

Kategorie: Signalkonditionierung 5B Module

- **Thermocouple Type:** Type E (Chromel-Constantan) - **Input Range:** 0°C to +1000°C - **Output Range:** 0 to +5 V DC (linearized) - **Linearization:** Internal cold-junction compensation and linearization for Type E thermocouples - **High Accuracy:** Factory-calibrated for precise temperature-to-voltage conversion - **Electrical Isolation:** 1500 V RMS isolation between input, output, and power - **Low Noise:** Designed for low drift and high signal integrity in noisy industrial environments - **Compact Form Factor:** Standard 5B module size for plug-in installation - **Plug-and-Play Compatibility:** Fits standard 5B backplanes and carriers - **Wide Operating Temperature Range:** Suitable for industrial temperature conditions - **Rugged Construction:** Encapsulated design for protection against vibration, humidity, and contaminants - **Ease of Integration:** Standardized pinout and output scaling for direct connection to analog input channels of data acquisition systems

Hersteller: Keine Kategorie

Kategorie: Signalkonditionierung 5B Module

- **Thermocouple Type:** Type J (Iron–Constantan) - **Input Range:** 0°C to +760°C - **Output Range:** 0 to +5 V DC - **Linearization:** Internal cold-junction compensation and linearization for Type J thermocouple characteristics - **High Accuracy:** Factory-calibrated for precise temperature-to-voltage conversion - **Galvanic Isolation:** Provides 1500 V RMS isolation between input, output, and power to eliminate ground loops and enhance measurement integrity - **Signal Conditioning:** Includes amplification, filtering, and linearization in a single compact module - **Plug-in Module Design:** Compatible with 5B Series backplanes and mounting racks for easy installation and replacement - **Low Noise and Drift:** Designed for stable operation in industrial environments with minimal thermal drift and noise interference - **Wide Operating Temperature Range:** Suitable for use in demanding environments - **Compact Form Factor:** Optimized for high-density signal conditioning applications

Hersteller: Keine Kategorie

Kategorie: Signalkonditionierung 5B Module

- **Thermocouple Type J Input:** Designed specifically for iron–constantan (Type J) thermocouples, ensuring accurate temperature measurement across a defined range. - **Input Range:** –100°C to +300°C, covering a broad span suitable for industrial and laboratory temperature monitoring. - **Output Range:** 0 to 5 V DC, providing a standardized analog signal compatible with most data acquisition and control systems. - **Linearized Output:** Internal circuitry compensates for the nonlinear characteristics of thermocouple response, delivering a linear voltage output proportional to temperature. - **High Accuracy and Stability:** Precision amplification and cold-junction compensation ensure reliable and repeatable measurements. - **Galvanic Isolation:** Input, output, and power are isolated to prevent ground loops and protect connected equipment from electrical interference. - **Compact Modular Design:** Standard 5B form factor allows easy installation into backplanes or mounting racks. - **Plug-and-Play Compatibility:** Designed for use with 5B series backplanes and carriers, simplifying integration into existing systems. - **Cold Junction Compensation (CJC):** Built-in compensation for ambient temperature variations at the thermocouple connection point. - **Rugged Industrial Construction:** Designed for harsh environments with robust electrical isolation and noise immunity.

Hersteller: Keine Kategorie

Kategorie: Signalkonditionierung 5B Module

- **Thermocouple Input Type:** Type J (Iron–Constantan) - **Input Temperature Range:** 0°C to +500°C - **Output Signal:** 0 to +5 V DC, linearized with respect to temperature - **Linearization:** Internal cold-junction compensation and linearization circuitry ensure accurate temperature-to-voltage conversion. - **Isolation:** High galvanic isolation between input, output, and power (typically 1500 V rms or higher), protecting downstream electronics from ground loops and electrical noise. - **Accuracy:** Factory-calibrated for precise temperature measurement and output scaling. - **Low Drift:** Stable operation over time and temperature variations due to precision components and internal compensation. - **Compact Form Factor:** Standard 5B module size for easy integration into existing 5B backplanes. - **Plug-and-Play Compatibility:** Designed for use with 5B series backplanes, carriers, and mounting racks. - **Rugged Industrial Design:** Suitable for harsh environments, with robust input protection and reliable performance. - **Ease of Integration:** Directly interfaces with analog input channels of DAQ systems, controllers, and monitoring equipment. - **Cold Junction Compensation (CJC):** Built-in CJC sensor ensures accurate thermocouple measurement without external compensation. - **Signal Conditioning:** Provides amplification, filtering, and isolation in a single module.

Hersteller: Keine Kategorie

Kategorie: Signalkonditionierung 5B Module

- **Thermocouple Input Type:** Type K (Chromel–Alumel) - **Input Range:** 0°C to +1000°C - **Output Range:** 0 to +5 V DC, linearized with respect to temperature - **Linearization:** Internal cold-junction compensation and linearization circuitry for accurate temperature-to-voltage conversion - **Galvanic Isolation:** Provides 1500 V RMS isolation between input, output, and power, ensuring signal integrity and protection from ground loops - **High Accuracy:** Factory-calibrated for precise temperature measurement and voltage output scaling - **Low Drift:** Stable operation over wide temperature ranges, minimizing measurement error due to ambient variations - **Compact Form Factor:** Standard 5B module size for use in 5B backplanes and mounting racks - **Plug-and-Play Integration:** Compatible with 5B Series backplanes, data acquisition systems, and analog input modules - **High Common-Mode Rejection:** Designed to reject electrical noise and interference in industrial environments - **Cold Junction Compensation (CJC):** Built-in sensor compensates for reference junction temperature variations - **Overvoltage Protection:** Input protection against transient voltages and wiring errors - **Wide Power Supply Range:** Operates from standard 5B system power (±5 V or ±15 V depending on configuration)

Hersteller: Keine Kategorie

Kategorie: Signalkonditionierung 5B Module

- **Thermocouple Type K Input:** Designed specifically for Type K thermocouples, covering a temperature range of 0°C to +500°C. - **Linearized Output:** Provides a linear 0–5 V output corresponding directly to the input temperature range, simplifying downstream signal processing. - **High Accuracy and Stability:** Factory-calibrated for precise temperature-to-voltage conversion with minimal drift over time and temperature. - **Electrical Isolation:** Incorporates galvanic isolation between input, output, and power supply, typically rated at 1500 V rms, ensuring protection against ground loops and electrical noise. - **Compact 5B Form Factor:** Standardized plug-in module compatible with 5B backplanes and mounting systems. - **Cold Junction Compensation (CJC):** Integrated cold-junction compensation ensures accurate thermocouple measurement without external compensation circuitry. - **Low Noise and High Common-Mode Rejection:** Optimized for industrial environments with high electrical noise, providing reliable and stable readings. - **Plug-and-Play Integration:** Designed for use with 5B series backplanes, simplifying installation and replacement. - **Wide Operating Temperature Range:** Suitable for harsh industrial conditions, typically operating from -40°C to +85°C ambient. - **Rugged and Reliable:** Encapsulated design for mechanical durability and long-term reliability in demanding applications.

Hersteller: Keine Kategorie

Kategorie: Signalkonditionierung 5B Module

- **Thermocouple Type R Input:** Accepts standard Type R thermocouple signals (Platinum/Platinum-Rhodium). - **Wide Temperature Range:** Measures from **0°C to +1750°C**, suitable for high-temperature industrial processes such as furnaces, kilns, and metallurgical applications. - **Linearized Output:** Provides a **0–5 V analog output** proportional to the input temperature, simplifying integration with analog input channels of data acquisition systems. - **High Accuracy and Stability:** Factory-calibrated for precise linearization and minimal drift over time and temperature. - **Galvanic Isolation:** Provides **1500 V rms isolation** between input, output, and power, protecting downstream equipment from ground loops and electrical noise. - **Cold-Junction Compensation (CJC):** Built-in CJC ensures accurate thermocouple readings without external compensation circuitry. - **Plug-in Module Format:** Designed for use with 5B Series backplanes and carriers, allowing easy installation, replacement, and system expansion. - **Low Power Consumption:** Optimized for low power operation, suitable for multi-channel systems. - **Rugged Industrial Design:** Encapsulated construction for protection against vibration, humidity, and electrical interference. - **Compatibility:** Fully compatible with 5B Series backplanes, mounting racks, and data acquisition systems from Analog Devices and Measurement Computing.

Hersteller: Keine Kategorie

Kategorie: Signalkonditionierung 5B Module

- **Thermocouple Input Type:** Type S (Platinum-Rhodium / Platinum) - **Input Range:** 0°C to +1750°C (linearized measurement range) - **Nominal Operating Range:** 0°C to +1000°C (as specified for the S10 variant) - **Output Range:** 0 to +5 V DC (standardized analog output) - **Linearization:** Internal linearization for Type S thermocouple response curve - **Cold Junction Compensation (CJC):** Built-in, ensuring accurate temperature readings independent of ambient conditions - **High Accuracy:** Factory-calibrated for precise thermocouple signal conditioning - **Galvanic Isolation:** Input-to-output and channel-to-channel isolation to prevent ground loops and electrical interference - **Compact Form Factor:** Standard 5B module size for use with 5B backplanes and mounting racks - **Plug-and-Play Integration:** Compatible with 5B Series backplanes, data acquisition systems, and signal conditioning racks - **High Common-Mode Rejection:** Ensures stable operation in noisy industrial environments - **Rugged Design:** Designed for industrial temperature ranges and long-term reliability - **Low Power Consumption:** Optimized for multi-channel systems and embedded DAQ applications

Hersteller: Keine Kategorie

Kategorie: Signalkonditionierung 5B Module

- **Thermocouple Input Type:** Type S (Platinum-Rhodium / Platinum) - **Input Range:** 0°C to +1800°C - **Output Range:** 0 V to +5 V (linearized) - **Linearization:** Internal cold-junction compensation and linearization for Type S thermocouple characteristics - **High Accuracy:** Factory-calibrated for precise temperature-to-voltage conversion - **Electrical Isolation:** 1500 V RMS isolation between input, output, and power to protect against ground loops and electrical noise - **Compact Form Factor:** Standard 5B module size for plug-in installation into 5B backplanes or carriers - **Low Drift and High Stability:** Designed for long-term accuracy and minimal temperature drift - **Plug-and-Play Compatibility:** Fully compatible with 5B Series backplanes, data acquisition systems, and signal conditioning racks - **Rugged Industrial Design:** Suitable for harsh environments, with robust construction and reliable performance - **Ease of Integration:** Standardized pinout and mechanical interface for quick installation and replacement Unique selling points include its **factory-calibrated linearization for Type S thermocouples**, **high isolation voltage**, and **standardized 0–5 V output**, making it ideal for integration with analog input channels of PLCs, DAQs, and control systems.

Hersteller: Keine Kategorie

Kategorie: Signalkonditionierung 5B Module

- **Thermocouple Type T Input:** Designed for copper-constantan thermocouples, offering high accuracy and stability over the specified temperature range. - **Input Range:** -100°C to +400°C, covering a broad span suitable for low- to medium-temperature industrial and laboratory processes. - **Output Signal:** 0–5 V DC linearized output, compatible with most analog input systems. - **Linearization:** Internal cold-junction compensation and linearization circuitry ensure accurate temperature-to-voltage conversion across the entire range. - **Galvanic Isolation:** Provides 1500 V RMS isolation between input, output, and power, protecting downstream equipment from ground loops and electrical noise. - **High Accuracy and Stability:** Typical accuracy better than ±0.1% of full scale, with low drift over time and temperature. - **Compact Modular Design:** Standard 5B form factor for use in backplanes or DIN-rail carriers, enabling flexible system configuration. - **Plug-and-Play Compatibility:** Fully compatible with 5B Series backplanes and data acquisition systems. - **Low Power Consumption:** Designed for efficient operation in multi-channel systems. - **Rugged Industrial Construction:** Encapsulated module for protection against vibration, humidity, and electrical interference.

Hersteller: Keine Kategorie

Kategorie: Signalkonditionierung 5B Module

- **Thermocouple Input (Type T):** Accepts direct connection from Type T thermocouples (Copper-Constantan). - **Input Range:** 0°C to +200°C, optimized for low-temperature measurement applications. - **Output Signal:** Linearized 0–5 V DC analog output, directly proportional to the measured temperature. - **Linearization:** Internal cold-junction compensation and linearization circuitry ensure accurate temperature-to-voltage conversion. - **Galvanic Isolation:** Provides high-level isolation between input, output, and power supply, typically rated at 1500 V rms or higher, protecting downstream equipment and reducing ground loop interference. - **High Accuracy and Stability:** Designed for precision measurement with low drift and high common-mode rejection ratio (CMRR). - **Compact 5B Form Factor:** Standardized plug-in module compatible with 5B backplanes and carriers. - **Ease of Integration:** Standard 0–5 V output allows direct interface with analog input channels of data acquisition systems, PLCs, and control systems. - **Rugged Industrial Design:** Suitable for harsh environments, with robust construction and reliable performance over extended temperature ranges. - **Low Power Consumption:** Optimized for multi-channel systems with minimal heat generation. - **Plug-and-Play Compatibility:** Works with standard 5B backplanes, simplifying installation and replacement.

Hersteller: Keine Kategorie

Kategorie: Signalkonditionierung 5B Module

- **Modular Design:** Supports up to **16 plug-in 5B modules**, allowing flexible configuration for various signal types (voltage, current, thermocouple, RTD, strain gauge, etc.). - **High Channel Density:** Enables connection of up to **128 channels** on one AD card, optimizing space and cost efficiency in multi-channel measurement systems. - **Compatibility:** Fully **connection-compatible with AX5210, AX5411**, and other related analog input systems, ensuring seamless integration into existing setups. - **Compact Form Factor:** With dimensions of **402 × 101 × 81 mm**, the board provides a high-density layout suitable for rack or panel mounting in industrial environments. - **Robust Construction:** Designed for stable operation in demanding industrial and laboratory conditions, ensuring reliable signal transmission and minimal interference. - **Ease of Integration:** Standardized connectors and pin assignments simplify wiring and reduce installation time. - **Scalability:** Modular expansion capability allows users to start with fewer modules and expand up to the full 16-module capacity as system requirements grow. - **Signal Integrity:** Optimized PCB layout minimizes crosstalk and noise, ensuring accurate signal conditioning and measurement. - **Versatile Application Range:** Suitable for analog signal acquisition, process control, automation systems, and laboratory instrumentation.

Hersteller: Axiom

Kategorie: Signalkonditionierung 5B Module

- **Standard 19-inch Rack Format:** Fully compliant with the 19" rack standard (IEC 60297), ensuring compatibility with standard rack cabinets and instrumentation setups. - **4U Height (4HE):** The enclosure has a height of **177 mm**, corresponding to 4 rack units (4U), allowing integration into multi-unit rack systems. - **Modular Design:** Supports up to **two carrier boards** for 5B modules, enabling flexible configuration and expansion. - **Compatibility with Multiple Module Types:** Designed to host a wide range of 5B-compatible modules, including analog input/output, communication, and interface modules (AX740–AX758, AX851, AX1416, AX2324D). - **High-Density Integration:** Accommodates up to **four 5B modules**, allowing compact installation of multiple signal conditioning channels in a single rack space. - **Robust Construction:** Built from durable materials suitable for industrial and laboratory environments, ensuring mechanical stability and long service life. - **Optimized for Signal Conditioning Systems:** Provides mechanical and electrical infrastructure for 5B signal conditioning modules, ensuring proper alignment, grounding, and shielding. - **Ease of Maintenance:** Modular carrier board design allows quick replacement or reconfiguration of modules without disassembling the entire rack. - **Efficient Cable Management:** Front and rear access for connectors and wiring simplifies integration into complex systems.

Hersteller: Axiom

Kategorie: Signalkonditionierung 5B Module

- **Standard 19" Rack Format:** Fully compliant with IEC 60297 and EIA-310-D standards for 19-inch rackmount equipment, ensuring compatibility with standard rack cabinets and enclosures. - **3HE (3U) Height:** Occupies three rack units (3U), providing a compact yet spacious enclosure for up to nine MT5BB4 modules. - **Capacity for 9 Modules:** Designed specifically to house and interface with nine MT5BB4 modules, offering a scalable and organized system configuration. - **Integrated Power Supply:** Includes a built-in power supply unit (PSU) optimized for the electrical requirements of the MT5BB4 modules, ensuring stable and reliable operation. - **Backplane Integration:** Equipped with a pre-installed backplane that provides power and signal connectivity between the modules and the system interface, minimizing cabling complexity. - **Mounting Hardware Included:** Supplied with all necessary mechanical holders, brackets, and fasteners for secure installation within a 19-inch rack frame. - **Robust Construction:** Industrial-grade materials and mechanical design ensure durability, vibration resistance, and long-term reliability in demanding environments. - **Plug-and-Play Module Installation:** Simplified module insertion and removal through guided slots and backplane connectors, supporting quick maintenance and system reconfiguration. - **Optimized Thermal Management:** Ventilation openings and optional fan integration points support effective heat dissipation for continuous operation. - **High System Integration:** Designed for seamless integration into modular control systems, data acquisition setups, or signal processing frameworks.

Hersteller: Keine Kategorie

Kategorie: Signalkonditionierung 5B Module

- **Euroformat Compatibility:** Designed specifically for Eurocard systems with a width of **9TE (45 mm)**, conforming to IEC 60297 standards for 19-inch subrack systems. - **Precision Machined Construction:** Manufactured from high-quality aluminum or anodized metal for durability, rigidity, and corrosion resistance. - **Standardized Mounting Interface:** Pre-drilled holes and alignment slots for secure attachment to subrack guide rails, handles, or PCB retainers. - **Professional Appearance:** Provides a clean, uniform front surface for labeling, connectors, and control elements, enhancing the visual and functional quality of electronic modules. - **Customizable Surface:** Can be machined, printed, or engraved for specific connector cutouts, logos, or identification markings. - **Electromagnetic Shielding (optional):** Depending on configuration, may include conductive coatings or gaskets to improve EMC performance. - **Lightweight and Rigid:** Optimized for mechanical stability while minimizing overall module weight. - **Universal Application:** Suitable for industrial automation, measurement technology, telecommunications, and embedded control systems.

Hersteller: Keine Kategorie

Kategorie: Signalkonditionierung 5B Module

- **Modular Baseboard Design:** Supports installation of **1–2 signal conditioning modules** from the MT5B or 5B series. - **Eurocard Format:** Conforms to the **Europaformat (Eurocard)** standard, ensuring compatibility with standard 19-inch rack systems and subracks. - **Galvanic Isolation:** Designed for use with modules that provide **potential separation** between input, output, and power supply circuits, enhancing measurement safety and signal integrity. - **Internal Power Distribution:** The board includes **integrated internal power supply routing**, eliminating the need for external wiring between modules and the baseboard. - **Flexible Module Combination:** Modules from the MT5B and 5B series can be **mixed freely**, allowing customized configurations for different measurement and control tasks. - **Output Interface to AD Cards:** Provides a **dedicated output connection** to analog-to-digital converter cards, enabling direct integration into data acquisition systems. - **VG32 Measurement Connector:** Equipped with a **VG32-type connector (Messerleiste)** for standardized signal interfacing and reliable electrical contact. - **Compact and Service-Friendly:** The Eurocard layout allows easy insertion and removal of modules, simplifying maintenance and system reconfiguration. - **High Signal Integrity:** Short signal paths and shielded design minimize noise and interference, ensuring accurate analog signal transmission.

Hersteller: Keine Kategorie

Kategorie: Signalkonditionierung 5B Module