Comprehensive Product Summary – INJ-101GT++-60W Industrial PoE Injector

---

### 1. Product Overview

Product Name: INJ-101GT++-60W
Model: INJ-101GT++-60W
Series: INJ-101GT++ Industrial PoE Injector Series
Article Number: INJ-101GT++-60W
Manufacturer: ORing Industrial Networking Corp.
Version: 1.0

The INJ-101GT++-60W is a high-performance, industrial-grade Power over Ethernet (PoE++) injector designed to deliver both data and power to network devices over a single Ethernet cable. It supports Gigabit Ethernet speeds and provides up to 60 watts of output power per port, making it suitable for powering high-demand PoE devices such as PTZ cameras, wireless access points, and industrial controllers. The unit is housed in a rugged IP30-rated metal enclosure, optimized for harsh industrial environments, and supports DIN-rail and wall-mount installations.

---

### 2. Key Features

- High Power PoE++ Output: Provides up to 60W of power output per port, supporting IEEE 802.3af/at compliant Powered Devices (PDs).
- Gigabit Ethernet Support: One 10/100/1000Base-T(X) data input port and one 10/100/1000Base-T(X) PoE output port ensure full Gigabit throughput.
- IEEE Compliance: Fully compliant with IEEE 802.3af (PoE) and IEEE 802.3at (PoE+) standards.
- Intelligent Power Detection: Automatically detects PoE signatures and supplies power only to compliant devices, preventing damage to non-PoE equipment.
- DIP Switch Configurator: Allows selection between Sync mode (default, for standard PoE af/at devices) and Async mode (for dual PD high-power applications such as 60W PTZ cameras).
- Rugged Industrial Design: Constructed with a metal IP30-rated enclosure for durability in industrial environments.
- Wide Operating Temperature Range: Operates reliably from -40°C to +75°C, suitable for extreme conditions.
- Flexible Mounting Options: Supports both DIN-rail and wall-mount installations.
- Comprehensive Protection: Built-in short circuit and overload protection mechanisms safeguard both the injector and connected devices.
- High Reliability: Mean Time Between Failures (MTBF) of 3,923,869 hours, ensuring long-term operational stability.
- Low Power Consumption: Consumes only 1W (excluding PD load).
- Industrial EMC and Safety Compliance: Meets multiple international standards for electromagnetic compatibility, safety, and environmental resilience.

---

### 3. Technical Specifications

Physical Characteristics:
- Enclosure: Rugged IP30-rated metal housing
- Dimensions (W x D x H): 26.1 × 70 × 95 mm (1.03 × 2.76 × 3.74 in)
- Weight: 188 g
- Mounting Options: DIN-rail and wall-mount compatible

Power Characteristics:
- Input Voltage: 50–57 VDC via 4-pin terminal block
- Power Consumption: 1 W (excluding PD load)
- PoE Power Budget: 60 W maximum
- PoE Output Standard: IEEE 802.3af/at compliant
- PoE Output Voltage: 50–57 VDC

Environmental Conditions:
- Operating Temperature: -40°C to +75°C (-40°F to +167°F)
- Storage Temperature: -40°C to +85°C (-40°F to +185°F)
- Operating Humidity: 5%–95% (non-condensing)

Reliability:
- MTBF: 3,923,869 hours
- Warranty: 5 years

Protection Features:
- Short circuit protection
- Overload protection
- Over-voltage input protection

---

### 4. Functionality

The INJ-101GT++-60W functions as a Power Sourcing Equipment (PSE) that injects power into an Ethernet cable while maintaining full data throughput. It features one RJ-45 data input port (data only) and one RJ-45 PoE output port (data + power). The injector automatically detects whether the connected device is PoE-capable before supplying power, ensuring safe operation.

Operating Modes:
- Sync Mode (Default): Supports standard IEEE 802.3af/at PDs.
- Async Mode: Enables dual PD operation for high-power devices (e.g., 60W PTZ cameras). Activated via DIP switch configuration.

Use Cases and Applications:
- Industrial automation systems
- IP surveillance (PTZ cameras, outdoor cameras)
- Wireless access points and bridges
- VoIP phones and network terminals
- Remote sensors and controllers in harsh environments

Compatibility:
- Compatible with all IEEE 802.3af/at compliant PDs
- Supports CAT5, CAT5e, and CAT6 UTP cables up to 100 meters (328 ft)
- Works with standard Ethernet switches, routers, and network devices

---

### 5. Components & Accessories

Package Contents:
- 1 × INJ-101GT++-60W PoE Injector
- 1 × DIN-rail mounting kit
- 1 × Wall-mount kit (two plates, eight screws)
- 1 × Quick Installation Guide (QIG)

Connectors:
- RJ-45 Ethernet Ports:
- 1 × Data Input (10/100/1000Base-T)
- 1 × Data + Power Output (10/100/1000Base-T PoE)
- Power Input: 4-pin terminal block for 50–57 VDC input

Optional Accessories:
- Industrial-grade power supply (50–57 VDC output)
- Additional DIN-rail or wall-mount brackets (if required for specific installations)

---

### 6. Installation & Setup

Installation Requirements:
- Power source: 50–57 VDC regulated supply
- Ethernet cables: CAT5 or higher, up to 100 m
- Mounting surface: DIN-rail or wall surface capable of supporting 188 g

DIN-Rail Installation:
1. Attach the DIN-rail kit to the back of the device using the provided screws.
2. Slide the device onto the DIN-rail until it clicks securely into place.

Wall-Mount Installation:
1. Attach the wall-mount plates to the top and bottom of the device using eight screws.
2. Mark the wall for screw placement using the device as a template.
3. Insert screws into the wall and hang the device by aligning the keyhole slots.
4. Tighten screws for stability.

Configuration:
- DIP Switch Settings:
- ON (default): Sync mode (standard PoE af/at)
- OFF: Async mode (dual PD, high-power 60W mode)
- LED Indicators:
- Power (Green): On when power is supplied
- PoE (Blue):
- On: PoE device detected and powered
- Off: No PoE device detected
- Blinking: Overload condition

Network Connection:
- Connect the Data IN port to a network switch or router using a standard Ethernet cable.
- Connect the PoE OUT port to the powered device (PD).
- Ensure total cable length does not exceed 100 meters.

---

### 7. Performance & Capabilities

Speed and Throughput:
- Supports full-duplex Gigabit Ethernet (1000 Mbps) operation.
- Maintains full data throughput while injecting power.

Power Delivery:
- Maximum PoE output: 60W per port
- Supports both IEEE 802.3af (15.4W) and IEEE 802.3at (30W) devices
- Extended power mode for 60W high-power PDs (via Async mode)

Efficiency:
- Low internal power consumption (1W) ensures minimal energy loss.
- Intelligent power management prevents overloading and overheating.

Limitations:
- Async mode cannot power standard IEEE 802.3af/at PDs simultaneously.
- Requires external DC power supply (not included).
- Maximum cable length limited to 100 meters per Ethernet standard.

---

### 8. Standards & Compliance

IEEE Standards:
- IEEE 802.3 10Base-T
- IEEE 802.3u 100Base-TX
- IEEE 802.3ab 1000Base-T
- IEEE 802.3af / IEEE 802.3at PoE standards

EMC and EMI Compliance:
- EN 55032, EN 55024 (CE EMC)
- FCC Part 15 Class A
- EN 61000-3-2, EN 61000-3-3
- CISPR 32

EMS (Electromagnetic Susceptibility):
- EN 61000-4-2 (ESD)
- EN 61000-4-3 (RS)
- EN 61000-4-4 (EFT)
- EN 61000-4-5 (Surge)
- EN 61000-4-6 (CS)
- EN 61000-4-8 (Power Frequency Magnetic Field)
- EN 61000-4-11 (Voltage Dips and Interruptions)

Environmental and Mechanical Standards:
- Shock: IEC 60068-2-27
- Free Fall: IEC 60068-2-31
- Vibration: IEC 60068-2-6

Safety Certification:
- EN 60950-1 (Information Technology Equipment Safety)

Ingress Protection:
- IP30-rated enclosure for protection against solid objects >2.5 mm

---

### 9. Additional Information

Warranty & Support:
- Warranty Period: 5 years limited warranty
- Technical Support: Provided by ORing Industrial Networking Corp.
- Documentation: Quick Installation Guide (QIG) included; additional manuals available online.

Maintenance:
- No internal serviceable parts; maintenance limited to external cleaning and inspection.
- Ensure adequate ventilation and avoid dust accumulation.
- Periodically check terminal block connections for secure fit.

Firmware & Updates:
- The INJ-101GT++-60W operates as a hardware-based injector with no firmware dependency.
- Updates are not required; configuration is hardware-based via DIP switches.

Safety Considerations:
- Ensure proper grounding and circuit protection.
- Avoid overloading the power supply circuit.
- Maintain adequate airflow around the device to prevent overheating.
- Verify ambient temperature does not exceed rated limits when installed in enclosed spaces.

Environmental Responsibility:
- Device and packaging are recyclable.
- Printed documentation uses recycled paper.

---

### Summary

The ORing INJ-101GT++-60W is a robust, industrial-grade Gigabit PoE++ injector engineered for high-power network applications. Delivering up to 60 watts of power output, it supports both standard and high-power PoE devices, ensuring flexibility across a wide range of industrial and commercial deployments. Its rugged IP30 metal housing, wide temperature tolerance, and DIN-rail/wall-mount versatility make it ideal for demanding environments such as manufacturing plants, transportation systems, and outdoor surveillance networks.

With comprehensive EMC, EMI, and safety certifications, intelligent power management, and a five-year warranty, the INJ-101GT++-60W provides a reliable, long-term solution for powering and connecting critical network infrastructure.