SUCHEN SIE DIE PASSENDE
INDUSTRIELLE LÖSUNG?
Entdecken Sie Embedded-, Kommunikations- und Automatisierungslösungen für Ihre Anwendung.
- Processor Support:
Supports Intel Pentium MMX, Low Power Pentium, AMD K6-2, K6-3, and Cyrix MII CPUs operating from 166 MHz to 400 MHz.
Socket 7 interface with 66 MHz front-side bus.
- Chipset:
Intel 82430TX PCIset with 82371EB southbridge for robust PCI/ISA bus integration.
- Memory:
Two 168-pin DIMM sockets supporting up to 256 MB SDRAM.
- Display Subsystem:
Integrated C&T 69000 VGA/LCD controller with 2 MB embedded SDRAM display memory.
Supports simultaneous CRT and LCD output, resolutions up to 1280×1024×8bpp, and DSTN/TFT panels (12/18/24-bit).
- Networking:
Onboard Intel 82559 10/100 Mbps Ethernet controller with Wake-on-LAN and Alert-on-LAN II support.
- I/O Interfaces:
- Two serial ports (COM1 RS-232, COM2 configurable RS-232/422/485)
- One parallel port (SPP/ECP/EPP)
- Two USB 1.0 ports
- Two IDE channels (Ultra DMA/33)
- Floppy disk interface (up to 2.88 MB)
- PS/2 keyboard and mouse connectors
- IrDA interface header
- Storage Options:
DiskOnChip socket supporting 2 MB to 72 MB flash storage.
- System Management:
Winbond W83781D hardware monitoring for voltage, temperature, and fan speed.
Programmable watchdog timer (0–255 seconds/minutes).
Case-open detection and system health monitoring.
- Power Management:
BIOS-controlled power-saving modes, Wake-on-LAN, modem ring-on, and Windows 98 software power-off support.
- Form Factor:
PICMG 1.0 compliant full-size CPU card (338 mm × 122 mm).
Supports Intel Pentium MMX, Low Power Pentium, AMD K6-2, K6-3, and Cyrix MII CPUs operating from 166 MHz to 400 MHz.
Socket 7 interface with 66 MHz front-side bus.
- Chipset:
Intel 82430TX PCIset with 82371EB southbridge for robust PCI/ISA bus integration.
- Memory:
Two 168-pin DIMM sockets supporting up to 256 MB SDRAM.
- Display Subsystem:
Integrated C&T 69000 VGA/LCD controller with 2 MB embedded SDRAM display memory.
Supports simultaneous CRT and LCD output, resolutions up to 1280×1024×8bpp, and DSTN/TFT panels (12/18/24-bit).
- Networking:
Onboard Intel 82559 10/100 Mbps Ethernet controller with Wake-on-LAN and Alert-on-LAN II support.
- I/O Interfaces:
- Two serial ports (COM1 RS-232, COM2 configurable RS-232/422/485)
- One parallel port (SPP/ECP/EPP)
- Two USB 1.0 ports
- Two IDE channels (Ultra DMA/33)
- Floppy disk interface (up to 2.88 MB)
- PS/2 keyboard and mouse connectors
- IrDA interface header
- Storage Options:
DiskOnChip socket supporting 2 MB to 72 MB flash storage.
- System Management:
Winbond W83781D hardware monitoring for voltage, temperature, and fan speed.
Programmable watchdog timer (0–255 seconds/minutes).
Case-open detection and system health monitoring.
- Power Management:
BIOS-controlled power-saving modes, Wake-on-LAN, modem ring-on, and Windows 98 software power-off support.
- Form Factor:
PICMG 1.0 compliant full-size CPU card (338 mm × 122 mm).
Comprehensive Product Summary: ADLINK NuPRO-591 PICMG Slot CPU Board
### 1. Product Overview
Product Name: NuPRO-591
Model: NuPRO-591
Series: NuPRO-590 Series (Industrial PICMG Slot CPU Boards)
Article Number: NuPRO-591
Manufacturer: ADLINK Technology Inc.
Product Type: Socket 7 PICMG™ Low Power Pentium Single Board Computer (SBC) with integrated VGA/LCD and Ethernet interfaces
Revision: Manual Rev. 1.10 (May 3, 2000)
The ADLINK NuPRO-591 is an industrial-grade PICMG slot CPU board designed for embedded and industrial computing applications. It is part of the NuPRO-590 series, which includes models NuPRO-590, NuPRO-591, and NuPRO-592. The NuPRO-591 integrates a Socket 7 CPU interface supporting Intel Pentium, AMD K6-2/K6-3, and Cyrix MII processors, and features onboard VGA/LCD display, Ethernet networking, and comprehensive I/O connectivity.
### 2. Key Features
- Processor Support:
Supports Intel Pentium MMX, Low Power Pentium, AMD K6-2, K6-3, and Cyrix MII CPUs operating from 166 MHz to 400 MHz.
Socket 7 interface with 66 MHz front-side bus.
- Chipset:
Intel 82430TX PCIset with 82371EB southbridge for robust PCI/ISA bus integration.
- Memory:
Two 168-pin DIMM sockets supporting up to 256 MB SDRAM.
- Display Subsystem:
Integrated C&T 69000 VGA/LCD controller with 2 MB embedded SDRAM display memory.
Supports simultaneous CRT and LCD output, resolutions up to 1280×1024×8bpp, and DSTN/TFT panels (12/18/24-bit).
- Networking:
Onboard Intel 82559 10/100 Mbps Ethernet controller with Wake-on-LAN and Alert-on-LAN II support.
- I/O Interfaces:
- Two serial ports (COM1 RS-232, COM2 configurable RS-232/422/485)
- One parallel port (SPP/ECP/EPP)
- Two USB 1.0 ports
- Two IDE channels (Ultra DMA/33)
- Floppy disk interface (up to 2.88 MB)
- PS/2 keyboard and mouse connectors
- IrDA interface header
- Storage Options:
DiskOnChip socket supporting 2 MB to 72 MB flash storage.
- System Management:
Winbond W83781D hardware monitoring for voltage, temperature, and fan speed.
Programmable watchdog timer (0–255 seconds/minutes).
Case-open detection and system health monitoring.
- Power Management:
BIOS-controlled power-saving modes, Wake-on-LAN, modem ring-on, and Windows 98 software power-off support.
- Form Factor:
PICMG 1.0 compliant full-size CPU card (338 mm × 122 mm).
### 3. Technical Specifications
Processor:
- Socket 7 CPU interface
- Supported CPUs: Intel Pentium MMX, AMD K6-2/K6-3, Cyrix MII
- Frequency range: 166–400 MHz
- Bus speed: 66 MHz
Chipset:
- Northbridge: Intel 82430TX
- Southbridge: Intel 82371EB
Cache:
- 512 KB L2 cache
Memory:
- 2 × 168-pin DIMM sockets
- Maximum capacity: 256 MB SDRAM
- Memory type: 3.3V unbuffered SDRAM
Display:
- Controller: C&T 69000 VGA/LCD
- Display memory: 2 MB SDRAM
- CRT resolution: up to 1280×1024×8bpp
- LCD support: DSTN/TFT panels, 12/18/24-bit color depth
- Simultaneous CRT/LCD display capability
Ethernet:
- Controller: Intel 82559
- Interface: 10/100Base-TX, RJ-45 connector
- Standards: IEEE 802.3, 802.3u, 802.3x
- Features: Auto-negotiation, full/half duplex, Wake-on-LAN
I/O Ports:
- Serial: 2 × 16550 UART (COM1 RS-232, COM2 RS-232/422/485 selectable)
- Parallel: 1 × SPP/ECP/EPP port
- USB: 2 × USB 1.0 headers
- IDE: 2 × 40-pin EIDE connectors (PIO Mode 3/4, Ultra DMA/33)
- Floppy: 1 × 34-pin FDD connector
- Keyboard/Mouse: PS/2 mini-DIN connectors
- VGA: 15-pin D-Sub connector
- LCD: 50-pin flat panel header
- IrDA: 5-pin header
- LAN: RJ-45 connector
- Fan: 3-pin CPU fan header
Expansion:
- PICMG 1.0 compliant edge connector
- No PC/104 interface
Power Requirements:
- AT/ATX power supply supported
- +5V @ 17.5A (max), +12V @ 50 mA
Environmental:
- Operating temperature: 0°C to 70°C
- Humidity: 5%–95% non-condensing
Physical:
- Dimensions: 338 mm × 122 mm
- Weight: Approx. 0.8 kg (board only)
### 4. Functionality
The NuPRO-591 operates as a full-size PICMG single board computer designed for industrial backplane systems. It integrates CPU, memory, display, and networking functions on a single board, interfacing with peripheral slots through the PICMG connector.
Use Cases & Applications:
- Industrial automation and control systems
- Embedded computing platforms
- Machine vision and HMI systems
- Networked data acquisition and monitoring
- Legacy system upgrades requiring Socket 7 compatibility
Compatibility:
- PICMG 1.0 compliant passive backplanes
- Operating systems: DOS, Windows 95/98/NT/2000, Linux, and other x86-compatible OSs
- Supports standard VGA monitors and LCD panels
### 5. Components & Accessories
Included Items:
- NuPRO-591 CPU board
- User’s manual
- IDE ribbon cable
- Floppy ribbon cable
- Serial and parallel port ribbon cables with mounting brackets
- Driver CD containing:
- Intel PCI IDE driver
- C&T 69000 VGA driver
- Intel 82559 LAN driver
- Flash memory utility
- Hardware Doctor utility
Optional Accessories:
- DiskOnChip flash modules (2–72 MB)
- External IrDA module
- LCD panel cables
- Thermal sensors and case-open sensors
Connectors:
- CN1/CN7: Primary/Secondary IDE
- CN2: Floppy drive
- CN3: Parallel port
- CN4: LCD panel
- CN5/CN6: Serial ports
- CN8: IrDA
- CN9: USB headers
- CN10: External keyboard
- CN11: VGA CRT
- CN12: Miscellaneous (power LED, reset, speaker, ATX control)
- CN13: Case open sensor
- CN14: RJ-45 LAN
- CN15: System temperature sensor
- CN16/CN18: PS/2 mouse/keyboard
- FN1: CPU fan power
### 6. Installation & Setup
CPU Installation:
- Lift the Socket 7 lever, align CPU notches, insert, and lock.
- Configure jumpers for CPU type and frequency (S1 switch).
Memory Installation:
- Supports 2 × 168-pin SDRAM DIMMs (16–128 MB each).
- Insert modules firmly into DIMM sockets.
Jumper Configuration:
- S1: CPU multiplier (2×–6×)
- JP2: LCD power (3.3V/5V)
- JP3/JP4: CPU I/O voltage (2.5V/3.3V)
- JP5/S3: CPU core voltage (1.9V–2.8V)
- JP6: Clear CMOS
- JP7: DiskOnChip BIOS address
- JP8/JP9: PCI slot master/slave selection
- JP1801–1803: COM2 mode (RS-232/422/485)
Watchdog Timer Setup:
- Programmable via I/O ports 3F0h/3F1h
- Timeout range: 0–255 seconds or minutes
BIOS Configuration:
- Award BIOS with PnP, DMI, and power management support
- Accessible via <Del> key during POST
- Supports IDE auto-detection, password protection, and hardware monitoring
### 7. Performance & Capabilities
Processing:
- Up to 400 MHz CPU frequency
- 66 MHz system bus
- 512 KB L2 cache for enhanced throughput
Memory Performance:
- 256 MB SDRAM maximum
- 66 MHz memory bus
Graphics:
- C&T 69000 VGA controller with 2 MB SDRAM
- 1280×1024 resolution at 8-bit color depth
- Dual display (CRT + LCD) capability
Networking:
- Intel 82559 10/100 Mbps Ethernet
- Full-duplex operation
- Wake-on-LAN and Alert-on-LAN II
Storage:
- Dual IDE channels supporting up to four devices
- Ultra DMA/33 transfer mode
- DiskOnChip flash boot support
Reliability Features:
- Watchdog timer for system recovery
- Hardware monitoring for voltage, temperature, and fan speed
- Case-open detection for security
Limitations:
- No PC/104 expansion
- USB 1.0 (limited to legacy peripherals)
- SDRAM capacity limited to 256 MB
### 8. Standards & Compliance
- PICMG 1.0 compliant full-size CPU card
- IEEE 802.3/802.3u/802.3x Ethernet standards
- USB 1.0 specification compliant
- ISA Plug and Play (PnP) BIOS support
- DMI (Desktop Management Interface) compliant
- Y2K compliant BIOS
- Award BIOS with ACPI and APM support
- CE and FCC industrial computing standards (implied by design)
### 9. Additional Information
Warranty:
- 1-year limited warranty from date of purchase
- Covers defects in materials and workmanship
- Excludes damage from misuse, modification, or operation beyond specifications
Support & Service:
- Technical support via ADLINK regional offices and email:
- NuPRO support: nupro@adlink.com.tw
- Website: [www.adlink.com.tw](http://www.adlink.com.tw)
- Tel: +886-2-82265877 | Fax: +886-2-82265717
- Address: 9F, No. 166, Jian Yi Road, Chungho City, Taipei 235, Taiwan, R.O.C.
Maintenance:
- Regularly monitor system health via Hardware Doctor utility
- Ensure adequate cooling and clean airflow
- Update BIOS and drivers as provided by ADLINK
Software Utilities:
- Hardware Doctor: Monitors voltage, temperature, and fan speed
- Intel PIIX Bus Master IDE Driver: Optimizes IDE performance under Windows 95/98
- C&T 69000 VGA Driver: Supports Windows 95/98/NT 4.0
- Intel 82559 LAN Driver: Supports Windows, DOS, NetWare, Linux
- Flash Utility: For BIOS updates
Driver Installation Support:
- Windows 95/98/NT 4.0 VGA and LAN driver installation procedures included
- Diagnostic utilities for Ethernet and hardware monitoring provided on CD
### Summary
The ADLINK NuPRO-591 is a robust, full-size PICMG industrial CPU board engineered for embedded and automation environments requiring stable Socket 7 performance, integrated VGA/LCD display, and Ethernet networking. With its Intel 430TX chipset, C&T 69000 graphics controller, and Intel 82559 Ethernet interface, it delivers reliable computing and communication capabilities for industrial control, HMI, and legacy system integration. Its comprehensive BIOS, watchdog timer, and hardware monitoring features ensure system stability and uptime in demanding applications.
The NuPRO-591 exemplifies ADLINK’s commitment to industrial reliability, offering a balanced combination of performance, expandability, and long-term support for embedded computing solutions.
### 1. Product Overview
Product Name: NuPRO-591
Model: NuPRO-591
Series: NuPRO-590 Series (Industrial PICMG Slot CPU Boards)
Article Number: NuPRO-591
Manufacturer: ADLINK Technology Inc.
Product Type: Socket 7 PICMG™ Low Power Pentium Single Board Computer (SBC) with integrated VGA/LCD and Ethernet interfaces
Revision: Manual Rev. 1.10 (May 3, 2000)
The ADLINK NuPRO-591 is an industrial-grade PICMG slot CPU board designed for embedded and industrial computing applications. It is part of the NuPRO-590 series, which includes models NuPRO-590, NuPRO-591, and NuPRO-592. The NuPRO-591 integrates a Socket 7 CPU interface supporting Intel Pentium, AMD K6-2/K6-3, and Cyrix MII processors, and features onboard VGA/LCD display, Ethernet networking, and comprehensive I/O connectivity.
### 2. Key Features
- Processor Support:
Supports Intel Pentium MMX, Low Power Pentium, AMD K6-2, K6-3, and Cyrix MII CPUs operating from 166 MHz to 400 MHz.
Socket 7 interface with 66 MHz front-side bus.
- Chipset:
Intel 82430TX PCIset with 82371EB southbridge for robust PCI/ISA bus integration.
- Memory:
Two 168-pin DIMM sockets supporting up to 256 MB SDRAM.
- Display Subsystem:
Integrated C&T 69000 VGA/LCD controller with 2 MB embedded SDRAM display memory.
Supports simultaneous CRT and LCD output, resolutions up to 1280×1024×8bpp, and DSTN/TFT panels (12/18/24-bit).
- Networking:
Onboard Intel 82559 10/100 Mbps Ethernet controller with Wake-on-LAN and Alert-on-LAN II support.
- I/O Interfaces:
- Two serial ports (COM1 RS-232, COM2 configurable RS-232/422/485)
- One parallel port (SPP/ECP/EPP)
- Two USB 1.0 ports
- Two IDE channels (Ultra DMA/33)
- Floppy disk interface (up to 2.88 MB)
- PS/2 keyboard and mouse connectors
- IrDA interface header
- Storage Options:
DiskOnChip socket supporting 2 MB to 72 MB flash storage.
- System Management:
Winbond W83781D hardware monitoring for voltage, temperature, and fan speed.
Programmable watchdog timer (0–255 seconds/minutes).
Case-open detection and system health monitoring.
- Power Management:
BIOS-controlled power-saving modes, Wake-on-LAN, modem ring-on, and Windows 98 software power-off support.
- Form Factor:
PICMG 1.0 compliant full-size CPU card (338 mm × 122 mm).
### 3. Technical Specifications
Processor:
- Socket 7 CPU interface
- Supported CPUs: Intel Pentium MMX, AMD K6-2/K6-3, Cyrix MII
- Frequency range: 166–400 MHz
- Bus speed: 66 MHz
Chipset:
- Northbridge: Intel 82430TX
- Southbridge: Intel 82371EB
Cache:
- 512 KB L2 cache
Memory:
- 2 × 168-pin DIMM sockets
- Maximum capacity: 256 MB SDRAM
- Memory type: 3.3V unbuffered SDRAM
Display:
- Controller: C&T 69000 VGA/LCD
- Display memory: 2 MB SDRAM
- CRT resolution: up to 1280×1024×8bpp
- LCD support: DSTN/TFT panels, 12/18/24-bit color depth
- Simultaneous CRT/LCD display capability
Ethernet:
- Controller: Intel 82559
- Interface: 10/100Base-TX, RJ-45 connector
- Standards: IEEE 802.3, 802.3u, 802.3x
- Features: Auto-negotiation, full/half duplex, Wake-on-LAN
I/O Ports:
- Serial: 2 × 16550 UART (COM1 RS-232, COM2 RS-232/422/485 selectable)
- Parallel: 1 × SPP/ECP/EPP port
- USB: 2 × USB 1.0 headers
- IDE: 2 × 40-pin EIDE connectors (PIO Mode 3/4, Ultra DMA/33)
- Floppy: 1 × 34-pin FDD connector
- Keyboard/Mouse: PS/2 mini-DIN connectors
- VGA: 15-pin D-Sub connector
- LCD: 50-pin flat panel header
- IrDA: 5-pin header
- LAN: RJ-45 connector
- Fan: 3-pin CPU fan header
Expansion:
- PICMG 1.0 compliant edge connector
- No PC/104 interface
Power Requirements:
- AT/ATX power supply supported
- +5V @ 17.5A (max), +12V @ 50 mA
Environmental:
- Operating temperature: 0°C to 70°C
- Humidity: 5%–95% non-condensing
Physical:
- Dimensions: 338 mm × 122 mm
- Weight: Approx. 0.8 kg (board only)
### 4. Functionality
The NuPRO-591 operates as a full-size PICMG single board computer designed for industrial backplane systems. It integrates CPU, memory, display, and networking functions on a single board, interfacing with peripheral slots through the PICMG connector.
Use Cases & Applications:
- Industrial automation and control systems
- Embedded computing platforms
- Machine vision and HMI systems
- Networked data acquisition and monitoring
- Legacy system upgrades requiring Socket 7 compatibility
Compatibility:
- PICMG 1.0 compliant passive backplanes
- Operating systems: DOS, Windows 95/98/NT/2000, Linux, and other x86-compatible OSs
- Supports standard VGA monitors and LCD panels
### 5. Components & Accessories
Included Items:
- NuPRO-591 CPU board
- User’s manual
- IDE ribbon cable
- Floppy ribbon cable
- Serial and parallel port ribbon cables with mounting brackets
- Driver CD containing:
- Intel PCI IDE driver
- C&T 69000 VGA driver
- Intel 82559 LAN driver
- Flash memory utility
- Hardware Doctor utility
Optional Accessories:
- DiskOnChip flash modules (2–72 MB)
- External IrDA module
- LCD panel cables
- Thermal sensors and case-open sensors
Connectors:
- CN1/CN7: Primary/Secondary IDE
- CN2: Floppy drive
- CN3: Parallel port
- CN4: LCD panel
- CN5/CN6: Serial ports
- CN8: IrDA
- CN9: USB headers
- CN10: External keyboard
- CN11: VGA CRT
- CN12: Miscellaneous (power LED, reset, speaker, ATX control)
- CN13: Case open sensor
- CN14: RJ-45 LAN
- CN15: System temperature sensor
- CN16/CN18: PS/2 mouse/keyboard
- FN1: CPU fan power
### 6. Installation & Setup
CPU Installation:
- Lift the Socket 7 lever, align CPU notches, insert, and lock.
- Configure jumpers for CPU type and frequency (S1 switch).
Memory Installation:
- Supports 2 × 168-pin SDRAM DIMMs (16–128 MB each).
- Insert modules firmly into DIMM sockets.
Jumper Configuration:
- S1: CPU multiplier (2×–6×)
- JP2: LCD power (3.3V/5V)
- JP3/JP4: CPU I/O voltage (2.5V/3.3V)
- JP5/S3: CPU core voltage (1.9V–2.8V)
- JP6: Clear CMOS
- JP7: DiskOnChip BIOS address
- JP8/JP9: PCI slot master/slave selection
- JP1801–1803: COM2 mode (RS-232/422/485)
Watchdog Timer Setup:
- Programmable via I/O ports 3F0h/3F1h
- Timeout range: 0–255 seconds or minutes
BIOS Configuration:
- Award BIOS with PnP, DMI, and power management support
- Accessible via <Del> key during POST
- Supports IDE auto-detection, password protection, and hardware monitoring
### 7. Performance & Capabilities
Processing:
- Up to 400 MHz CPU frequency
- 66 MHz system bus
- 512 KB L2 cache for enhanced throughput
Memory Performance:
- 256 MB SDRAM maximum
- 66 MHz memory bus
Graphics:
- C&T 69000 VGA controller with 2 MB SDRAM
- 1280×1024 resolution at 8-bit color depth
- Dual display (CRT + LCD) capability
Networking:
- Intel 82559 10/100 Mbps Ethernet
- Full-duplex operation
- Wake-on-LAN and Alert-on-LAN II
Storage:
- Dual IDE channels supporting up to four devices
- Ultra DMA/33 transfer mode
- DiskOnChip flash boot support
Reliability Features:
- Watchdog timer for system recovery
- Hardware monitoring for voltage, temperature, and fan speed
- Case-open detection for security
Limitations:
- No PC/104 expansion
- USB 1.0 (limited to legacy peripherals)
- SDRAM capacity limited to 256 MB
### 8. Standards & Compliance
- PICMG 1.0 compliant full-size CPU card
- IEEE 802.3/802.3u/802.3x Ethernet standards
- USB 1.0 specification compliant
- ISA Plug and Play (PnP) BIOS support
- DMI (Desktop Management Interface) compliant
- Y2K compliant BIOS
- Award BIOS with ACPI and APM support
- CE and FCC industrial computing standards (implied by design)
### 9. Additional Information
Warranty:
- 1-year limited warranty from date of purchase
- Covers defects in materials and workmanship
- Excludes damage from misuse, modification, or operation beyond specifications
Support & Service:
- Technical support via ADLINK regional offices and email:
- NuPRO support: nupro@adlink.com.tw
- Website: [www.adlink.com.tw](http://www.adlink.com.tw)
- Tel: +886-2-82265877 | Fax: +886-2-82265717
- Address: 9F, No. 166, Jian Yi Road, Chungho City, Taipei 235, Taiwan, R.O.C.
Maintenance:
- Regularly monitor system health via Hardware Doctor utility
- Ensure adequate cooling and clean airflow
- Update BIOS and drivers as provided by ADLINK
Software Utilities:
- Hardware Doctor: Monitors voltage, temperature, and fan speed
- Intel PIIX Bus Master IDE Driver: Optimizes IDE performance under Windows 95/98
- C&T 69000 VGA Driver: Supports Windows 95/98/NT 4.0
- Intel 82559 LAN Driver: Supports Windows, DOS, NetWare, Linux
- Flash Utility: For BIOS updates
Driver Installation Support:
- Windows 95/98/NT 4.0 VGA and LAN driver installation procedures included
- Diagnostic utilities for Ethernet and hardware monitoring provided on CD
### Summary
The ADLINK NuPRO-591 is a robust, full-size PICMG industrial CPU board engineered for embedded and automation environments requiring stable Socket 7 performance, integrated VGA/LCD display, and Ethernet networking. With its Intel 430TX chipset, C&T 69000 graphics controller, and Intel 82559 Ethernet interface, it delivers reliable computing and communication capabilities for industrial control, HMI, and legacy system integration. Its comprehensive BIOS, watchdog timer, and hardware monitoring features ensure system stability and uptime in demanding applications.
The NuPRO-591 exemplifies ADLINK’s commitment to industrial reliability, offering a balanced combination of performance, expandability, and long-term support for embedded computing solutions.
-
NuPRO590 Manual.PDF
Manual
Kein Zubehör vorhanden.
