- **Dual RS‑232 Ports:** Provides two independent RS‑232 serial communication channels via a single PCI Express interface. - **High‑Speed Data Transfer:** Supports baud rates from 75 bps up to 921.6 kbps per port. - **64‑Byte FIFO UART:** Each port includes a 64‑byte hardware FIFO buffer, fully compatible with the industry‑standard 16C750 UART controller. - **Unlimited Scalability:** Multiple IPC‑E1002 cards can be installed in the same system, limited only by available PCIe slots. - **DB44 Female Connector:** The card uses a DB44‑female connector on the bracket, with breakout cables to DB9 or DB25 male connectors. - **Comprehensive Cable Options:** Includes DB44‑to‑DB9/DB25 male cables (2‑port or 4‑port configurations) in 40 cm and 100 cm lengths. - **Embedded 15 kV ESD Protection:** Protects all signal lines against electrostatic discharge, ensuring long‑term reliability in industrial environments. - **Wide Temperature Range:** Operates from 0 °C to 70 °C; storage temperature from −40 °C to 85 °C. - **Compact Form Factor:** Card dimensions 125 × 63 mm; supplied with both 79.2 mm low‑profile and 121 mm standard brackets. - **Driver Support:** Includes Windows and Linux drivers on CD; supports DOS, Windows 2000/XP/2003/Vista (32/64‑bit), Linux 2.4/2.6, and SCO OpenServer 5.06/5.07. - **Plug‑and‑Play Installation:** IRQ and I/O addresses automatically assigned by the system BIOS or operating system. - **Industrial‑Grade Reliability:** Designed for continuous operation in automation, control, and communication systems.

Manufacturer: Sunix

Category: Professional Serial

- **Four Independent RS‑232 Ports:** Provides four fully functional serial channels for simultaneous communication with multiple devices. - **High‑Speed Data Transmission:** Supports baud rates from 75 bps to 921.6 Kbps, ensuring compatibility with both legacy and modern serial peripherals. - **64‑Byte Hardware FIFO:** Each port includes a 64‑byte transmit/receive FIFO buffer, 16C750‑compatible, minimizing CPU load and improving throughput. - **PCI Express Interface:** Compliant with PCI Express Bus Specification Revision 1.0a, utilizing a single‑lane (x1) interface for high‑speed host communication. - **Unlimited Scalability:** Multiple IPC‑E1004 cards can be installed in the same system, limited only by available PCIe slots. - **DB44 Female Connector:** On‑board DB44‑F connector provides a compact interface for breakout cables to DB9 or DB25 connectors. - **Included Connection Cable:** DB44‑M to DB9/DB25‑M cable (2/4‑port configuration, 40 cm or 100 cm length). - **Embedded 15 kV ESD Protection:** Integrated electrostatic discharge protection on all signal lines ensures robust operation in harsh industrial environments. - **Wide Operating Temperature Range:** 0 °C – 70 °C operational, −40 °C – 85 °C storage. - **Compact Form Factor:** 125 mm × 63 mm PCB, supplied with both standard (121 mm) and low‑profile (79.2 mm) brackets. - **Driver Support:** Compatible with Windows 2000/XP/2003/Vista (32/64‑bit), DOS, Linux 2.4/2.6, and SCO OpenServer 5.06/5.07. - **Industrial‑Grade Reliability:** Designed for continuous operation in automation, control, and data‑logging systems. - **5‑Year Warranty:** Long‑term reliability backed by SUNIX’s industrial warranty program.

Manufacturer: Sunix

Category: Professional Serial

- **Eight Independent RS‑232 Ports:** Provides eight fully independent serial communication channels for simultaneous device connectivity. - **High‑Speed Data Transmission:** Supports baud rates from **75 bps up to 921.6 Kbps**, suitable for both legacy and high‑speed serial devices. - **64‑Byte FIFO UART Buffer:** Each port integrates a **64‑byte hardware FIFO**, compatible with the **16C750 UART** standard, ensuring efficient data handling and reduced CPU load. - **PCI Express Interface:** Compliant with **PCI Express Bus Specification Revision 1.0a**, utilizing a **1‑lane PCIe** connection for high‑bandwidth, low‑latency communication. - **Unlimited Card Scalability:** Multiple IPC‑E1008 cards can be installed in a single system, limited only by available PCIe slots. - **Mini SCSI 68‑Pin Connector:** On‑board mini SCSI 68‑pin connector links to an external breakout cable providing eight DB9 male connectors. - **Comprehensive OS Support:** Compatible with **Windows 2000/XP/2003/Vista (32/64‑bit)**, **Linux 2.4/2.6**, **SCO OpenServer 5.06/5.07**, and **DOS**. - **Embedded 15 kV ESD Protection:** Built‑in electrostatic discharge protection on all signal lines ensures robust operation in industrial environments. - **Wide Temperature Range:** Operates reliably from **0 °C to 70 °C**, with storage capability from **–40 °C to 85 °C**. - **Dual Bracket Design:** Supplied with both **standard (121 mm)** and **low‑profile (79.2 mm)** brackets for flexible installation in various chassis types. - **Industrial‑Grade Reliability:** Designed for continuous operation in automation, POS, and data acquisition systems. - **Plug‑and‑Play Configuration:** IRQ and I/O addresses are automatically assigned by the system BIOS or operating system—no jumpers or DIP switches required. - **SUNIX Proprietary Technologies:** - **AHDC/CS™ (Auto Hardware Direction Control / Carrier Sense):** Automatically manages RS‑485 signal direction to prevent bus collisions. - **Auto Detect & Switching RS‑422/485:** Enables automatic mode detection and switching between RS‑422 full‑duplex and RS‑485 half‑duplex without manual configuration.

Manufacturer: Sunix

Category: Professional Serial

- **Dual Independent Serial Ports:** Two fully isolated RS‑422/485 ports accessible via a DB‑44 female connector and breakout cable. - **PCI‑Express Interface:** Compliant with PCI Express Bus Specification Revision 1.0a; operates on a single‑lane (x1) PCI‑E slot. - **High‑Speed Communication:** Supports baud rates from 75 bps up to 921.6 Kbps per port. - **64‑Byte Hardware FIFO:** Each port includes a 64‑byte hardware FIFO buffer, 16C750‑compatible, ensuring smooth data flow and reduced CPU overhead. - **Auto RS‑422/485 Detection and Switching:** Automatically detects and switches between RS‑422 full‑duplex and RS‑485 half‑duplex modes without manual jumper settings. - **SUNIX AHDC/CS™ Technology:** Provides automatic RS‑485 signal direction control with carrier sense to prevent data collisions and ensure precise timing. - **Embedded 15 kV ESD Protection:** Built‑in electrostatic discharge protection on all signal lines for enhanced reliability in industrial environments. - **Unlimited Card Scalability:** Multiple IPC‑E2002 cards can be installed in a single system, limited only by available PCI‑E slots. - **Software Flow Control:** Supports XON/XOFF software flow control for reliable data transmission. - **Wide OS Compatibility:** Drivers available for Windows 2000/XP/2003/Vista (32/64‑bit), DOS, Linux 2.4/2.6, and SCO OpenServer 5.06/5.07. - **Compact Design:** Supplied with both standard (121 mm) and low‑profile (79.2 mm) brackets for flexible installation in various chassis types. - **Industrial‑Grade Reliability:** Operating temperature range from 0°C to 70°C and storage range from ‑40°C to 85°C. - **Long‑Term Warranty:** Backed by a 5‑year manufacturer warranty.

Manufacturer: Sunix

Category: Professional Serial

- **Dual RS‑422/485 Ports:** Two independent serial communication ports supporting both RS‑422 full‑duplex and RS‑485 half‑duplex modes. - **PCI‑Express Interface:** Compliant with PCI Express Bus Specification Revision 1.0a, utilizing a single‑lane (x1) interface for high‑speed data throughput and compatibility with modern systems. - **Automatic RS‑422/485 Detection and Switching:** SUNIX’s proprietary auto‑detect technology automatically identifies and configures the port for RS‑422 or RS‑485 operation without manual jumper settings. - **AHDC/CS™ Technology:** Auto Hardware Direction Control/Carrier Sense technology automatically manages RS‑485 signal direction, ensuring precise timing and preventing data collisions on the bus. - **High‑Speed Communication:** Supports baud rates from 75 bps up to 921.6 kbps with 64‑byte hardware FIFO buffers per port for efficient data handling. - **Electrical Isolation:** 2.5 kV optical isolation between system and serial lines to eliminate ground loops and protect against electrical noise. - **Surge Protection:** 600 W peak surge suppression per IEC 61000‑4‑5 standard to protect connected devices from transient voltage spikes. - **ESD Protection:** Embedded 15 kV electrostatic discharge protection on all signal lines. - **Software Flow Control:** XON/XOFF software‑based flow control supported. - **Unlimited Scalability:** Multiple cards can be installed in a single system, limited only by available PCI‑Express slots. - **Compact Design:** Supplied with both standard (121 mm) and low‑profile (79.2 mm) brackets for flexible installation in various chassis types. - **Cross‑Platform Driver Support:** Compatible with Windows 2000/XP/2003/Vista (32/64‑bit), DOS, Linux 2.4/2.6, and SCO OpenServer 5.06/5.07. - **Industrial Reliability:** Designed for continuous operation in 0 °C – 70 °C environments with high humidity tolerance (5 % – 95 % RH). - **Long‑Term Warranty:** Backed by a 5‑year manufacturer warranty.

Manufacturer: Sunix

Category: Professional Serial

- **Four Independent Serial Ports:** Supports four RS‑422/485 ports accessible through a DB‑44 female connector and breakout cable. - **High‑Speed Communication:** Baud rates from **75 bps to 921.6 Kbps** per port. - **Advanced UART Controller:** Built‑in 64‑byte hardware FIFO buffer, **16C750‑compatible** UART for efficient data handling and reduced CPU load. - **Auto RS‑422/485 Detection and Switching:** Automatically detects and configures the port for RS‑422 full‑duplex or RS‑485 half‑duplex operation without jumpers or manual configuration. - **SUNIX AHDC/CS™ Technology:** Proprietary **Auto Hardware Direction Control / Carrier Sense** mechanism for precise RS‑485 signal direction control, ensuring collision‑free bidirectional communication. - **Embedded 15 kV ESD Protection:** Integrated electrostatic discharge protection on all signal lines for enhanced durability in harsh environments. - **Unlimited Scalability:** Supports an unlimited number of cards per system (limited only by available PCIe slots). - **Flexible Mounting:** Supplied with both **standard (121 mm)** and **low‑profile (79.2 mm)** brackets for installation in full‑height or compact chassis. - **Comprehensive OS Support:** Compatible with **Windows 2000/XP/2003/Vista (32/64‑bit)**, **Linux 2.4/2.6**, **SCO OpenServer 5.06/5.07**, and **DOS**. - **Industrial‑Grade Reliability:** Designed for continuous operation in environments from **0 °C to 70 °C**, with storage tolerance from **–40 °C to 85 °C**. - **Long‑Term Warranty:** Backed by a **5‑year manufacturer warranty**.

Manufacturer: Sunix

Category: Professional Serial

- **Four Independent Serial Ports:** Supports four isolated RS‑422/485 channels via a DB‑44 female connector and breakout cable. - **PCI Express Interface:** Compliant with PCI Express Bus Specification Revision 1.0a; operates on a single PCIe lane for high throughput and low latency. - **High‑Speed Communication:** Supports baud rates from 75 bps up to 921.6 kbps per port. - **Optical Isolation:** 2.5 kV isolation protection for all signal and power lines, preventing ground loops and protecting connected devices in electrically noisy environments. - **Surge Protection:** 600 W peak surge suppression per IEC 61000‑4‑5 standard, safeguarding against transient voltage spikes. - **ESD Protection:** Embedded 15 kV electrostatic discharge protection on all signal lines. - **Automatic RS‑422/485 Detection and Switching:** SUNIX Auto Detect and Switching technology automatically configures each port for RS‑422 or RS‑485 operation without jumpers or DIP switches. - **AHDC/CS™ Technology:** Proprietary Auto Hardware Direction Control/Carrier Sense system for precise RS‑485 signal direction management, minimizing bus collisions and ensuring reliable half‑duplex communication. - **64‑Byte FIFO Buffer:** Hardware FIFO per port, fully compatible with 16C750 UART architecture, ensuring smooth data flow and reduced CPU overhead. - **Software Flow Control:** Supports XON/XOFF software flow control. - **Unlimited Scalability:** Multiple cards can be installed in a single system, limited only by available PCIe slots. - **Dual Bracket Design:** Includes both standard (121 mm) and low‑profile (79.2 mm) brackets for flexible installation in various chassis types. - **Wide Environmental Range:** Operating temperature 0 °C – 70 °C; storage temperature −40 °C – 85 °C; humidity 5 % – 95 % RH. - **Comprehensive OS Support:** Compatible with Windows 2000/XP/2003/Vista (32/64‑bit), DOS, Linux 2.4/2.6, and SCO OpenServer 5.06/5.07. - **Regulatory Compliance:** CE and FCC Class B certified. - **Long‑Term Reliability:** Backed by a 5‑year manufacturer warranty.

Manufacturer: Sunix

Category: Professional Serial

- **Eight Independent RS‑422/485 Ports:** Provides eight fully isolated serial channels for industrial communication, supporting both 2‑wire and 4‑wire RS‑485 as well as full‑duplex RS‑422 modes. - **PCI Express Interface (Rev. 1.0a):** Compliant with PCI Express Bus Specification Revision 1.0a, utilizing a single‑lane (x1) interface for high‑speed data throughput and compatibility with modern systems. - **Auto Detect & Switching Technology:** Automatically detects and switches between RS‑422 full‑duplex and RS‑485 half‑duplex modes without manual jumper configuration. - **SUNIX AHDC/CS™ Technology:** Proprietary Auto Hardware Direction Control/Carrier Sense mechanism for precise RS‑485 signal direction control, preventing data collisions and ensuring reliable half‑duplex communication. - **High‑Speed Data Transmission:** Supports baud rates from 75 bps up to 921.6 Kbps per port, suitable for real‑time and low‑latency industrial applications. - **64‑Byte Hardware FIFO:** Each port includes a 64‑byte FIFO buffer, 16C750‑compatible, for efficient data handling and reduced CPU load. - **Comprehensive Protection:** - **15 kV ESD Protection:** Embedded electrostatic discharge protection on all signal lines. - **600 W Surge Protection:** Circuit damage protection per IEC 61000‑4‑5 standard. - **2.5 kV Optical Isolation:** Isolation for both signal and power lines to eliminate ground loops and protect against voltage differentials. - **Unlimited Card Scalability:** Multiple IPC‑E2008SI cards can be installed in a single system, limited only by available PCI‑Express slots. - **Wide OS Compatibility:** Supports Windows 2000/XP/2003/Vista (32/64‑bit), DOS, Linux (2.4/2.6 kernels), and SCO OpenServer 5.06/5.07. - **Industrial‑Grade Design:** Engineered for continuous operation in environments with temperatures from 0°C to 70°C and humidity up to 95% RH. - **User‑Friendly Installation:** Plug‑and‑play configuration with automatic IRQ and I/O address assignment by the system BIOS/OS. - **Long‑Term Reliability:** Backed by a 5‑year manufacturer warranty.

Manufacturer: Sunix

Category: Professional Serial

- **Triple‑Mode Serial Interface (3‑in‑1):** Each of the four ports can independently operate as RS‑232, RS‑422, or RS‑485, selectable via software without jumpers or DIP switches. - **High‑Speed Communication:** Supports baud rates from **75 bps up to 921.6 Kbps** per port, suitable for high‑throughput industrial data exchange. - **Advanced UART Architecture:** Built around the SUNIX proprietary **Matrix single‑chip ASIC** with integrated 16C750‑compatible UART controllers and **64‑byte hardware FIFO** per port for efficient buffering and reduced CPU load. - **Auto‑Detection and Switching:** SUNIX’s **Auto Detect and Switching RS‑422/485** technology automatically identifies full‑duplex (RS‑422) or half‑duplex (RS‑485) operation modes, eliminating manual configuration. - **Automatic RS‑485 Direction Control:** Incorporates **AHDC/CS™ (Auto Hardware Direction Control / Carrier Sense)** technology for precise, collision‑free control of RS‑485 data direction. - **Embedded ESD Protection:** Each port includes **15 kV ESD protection** for signal lines, ensuring robust operation in electrically noisy environments. - **Unlimited Scalability:** Supports an **unlimited number of cards per system**, limited only by available PCI‑Express slots. - **Flexible Form Factor:** Supplied with both **standard (121 mm)** and **low‑profile (79.2 mm)** brackets for compatibility with full‑height and compact chassis. - **Comprehensive OS Support:** Compatible with **Windows 2000/XP/2003/Vista (32/64‑bit)**, **Linux 2.4/2.6 kernels**, **SCO OpenServer 5.06/5.07**, and **DOS**. - **Industrial‑Grade Reliability:** Designed for continuous operation in 0 °C – 70 °C environments with extended storage range of −40 °C – 85 °C. - **Regulatory Compliance:** Certified to **CE** and **FCC Class B** standards. - **Long‑Term Warranty:** Backed by a **5‑year manufacturer warranty**.

Manufacturer: Sunix

Category: Professional Serial

- **Dual RS‑232 Ports:** Provides two independent RS‑232 serial communication channels via a DB‑44 female connector on the card, expandable through a breakout cable to DB‑9 or DB‑25 male connectors. - **Universal PCI Interface:** Fully compliant with PCI versions 3.0, 2.3, and 2.2; supports both 3.3 V and 5 V signaling environments, ensuring compatibility with legacy and modern PCI/PCI‑X systems (33 MHz / 66 MHz). - **High‑Speed Communication:** Supports baud rates from 75 bps up to 921.6 Kbps, suitable for high‑throughput industrial data exchange. - **64‑Byte FIFO Buffer:** Hardware FIFO per port, 16C750‑compatible UART for efficient data handling and reduced CPU load. - **Unlimited Scalability:** Multiple cards can be installed in a single system, limited only by available PCI slots. - **Embedded 15 kV ESD Protection:** Built‑in electrostatic discharge protection on all signal lines ensures long‑term reliability in harsh environments. - **Wide Temperature Range:** Operational from 0 °C to 70 °C; storage from −40 °C to 85 °C. - **Comprehensive OS Support:** Compatible with DOS, Linux (2.4 x / 2.6 x kernels), SCO OpenServer 5.06/5.07, and Microsoft Windows 2000, XP (32/64‑bit), 2003 (32/64‑bit), and Vista (32‑bit). - **Plug‑and‑Play Configuration:** IRQ and I/O addresses automatically assigned by the system BIOS or operating system—no DIP switches or jumpers required. - **Industrial‑Grade Design:** Engineered for continuous operation in automation, POS, and data acquisition systems. - **5‑Year Warranty:** Long‑term manufacturer warranty ensures reliability and support.

Manufacturer: Sunix

Category: Professional Serial

- **Four Independent RS‑232 Ports:** Provides four fully functional serial channels for simultaneous communication with multiple RS‑232 devices. - **Universal PCI Interface:** Compatible with both 3.3 V and 5 V PCI slots (PCI Ver. 3.0/2.3/2.2), supporting 32‑bit and 64‑bit PCI and PCI‑X buses at 33 MHz or 66 MHz. - **High‑Speed Communication:** Supports baud rates from 75 bps up to 921.6 Kbps per port, suitable for high‑throughput industrial data exchange. - **64‑Byte Hardware FIFO:** Each port integrates a 64‑byte transmit/receive FIFO buffer, 16C750‑compatible, ensuring smooth data flow and reduced CPU overhead. - **Unlimited Scalability:** Multiple cards can be installed in a single system, limited only by available PCI slots. - **Embedded 15 kV ESD Protection:** Built‑in electrostatic discharge protection on all signal lines safeguards connected equipment and the card itself. - **DB‑44 Female Connector:** Compact high‑density connector on the card, with breakout cable to standard DB‑9 or DB‑25 male connectors. - **Comprehensive Driver Support:** Compatible with Windows 2000/XP/2003/Vista (32/64‑bit), DOS, Linux 2.4/2.6, SCO OpenServer 5.06/5.07, and Unix systems. - **Wide Operating Range:** Designed for industrial environments with operating temperature from 0 °C to 70 °C and storage temperature from –40 °C to 85 °C. - **Long‑Term Reliability:** Backed by a 5‑year manufacturer warranty.

Manufacturer: Sunix

Category: Professional Serial

- **Eight Independent RS‑232 Ports:** Provides eight fully functional serial channels for simultaneous communication with multiple devices. - **Universal PCI Interface:** Supports both 3.3 V and 5 V signaling, compatible with 32‑bit and 64‑bit PCI and PCI‑X buses operating at 33 MHz or 66 MHz. - **High‑Speed Data Transmission:** Supports baud rates from 75 bps up to 921.6 kbps per port, ensuring reliable high‑speed serial communication. - **64‑Byte Hardware FIFO:** Each port includes a 64‑byte transmit/receive FIFO buffer, 16C750‑compatible, minimizing CPU overhead and improving throughput. - **Single‑Chip Matrix UART Controller:** Integrates multiple UARTs into a single ASIC, reducing latency and power consumption while improving reliability. - **Embedded 15 kV ESD Protection:** Built‑in electrostatic discharge protection on all signal lines safeguards connected equipment and the card itself. - **Mini SCSI 68‑Pin Connector:** Compact high‑density connector on the card, with breakout cable to eight DB9 male connectors (available in 40 cm or 100 cm lengths). - **Unlimited Card Scalability:** Multiple IPC‑P1008 cards can be installed in a single system, limited only by available PCI slots. - **Wide Operating Temperature Range:** Designed for industrial environments with operating temperatures from 0 °C to 70 °C and storage temperatures from −40 °C to 85 °C. - **Comprehensive OS Support:** Compatible with Windows 2000/XP/2003/Vista (32‑/64‑bit), DOS, Linux (2.4 x/2.6 x), and UNIX systems. - **Plug‑and‑Play Configuration:** IRQ and I/O addresses are automatically assigned by the system BIOS or operating system—no jumpers or DIP switches required. - **Long‑Term Reliability:** Backed by a 5‑year manufacturer’s warranty and designed for continuous industrial operation.

Manufacturer: Sunix

Category: Professional Serial

- **16 Independent RS‑232 Ports:** Provides sixteen fully independent serial channels for simultaneous communication with multiple devices. - **Universal PCI Interface:** Compatible with 32‑bit and 64‑bit PCI and PCI‑X buses operating at 33 MHz or 66 MHz, supporting both 3.3 V and 5 V slots. - **High‑Speed Communication:** Supports baud rates from 75 bps up to 921.6 Kbps per port, suitable for high‑throughput industrial data exchange. - **64‑Byte Hardware FIFO:** Each port integrates a 64‑byte transmit/receive FIFO buffer, 16C750‑compatible, ensuring smooth data flow and reduced CPU overhead. - **Single‑Chip ASIC Design:** Utilizes SUNIX’s proprietary Matrix single‑chip UART controller, integrating all 16 UARTs into one ASIC for improved performance, reduced latency, and lower power consumption. - **Embedded 15 kV ESD Protection:** Built‑in electrostatic discharge protection on all signal lines safeguards connected equipment and ensures long‑term reliability. - **Auto Hardware Direction Control (AHDC/CS™):** SUNIX’s patented technology automatically manages RS‑485 signal direction, preventing data collisions and ensuring precise timing. - **Auto Detect and Switching Technology:** Automatically detects and switches between RS‑422 full‑duplex and RS‑485 half‑duplex modes without manual jumper configuration. - **Unlimited Scalability:** Multiple IPC‑P1016 cards can be installed in a single system, limited only by available PCI slots. - **Wide Operating Temperature Range:** Designed for industrial environments, operating from 0 °C to 70 °C and storing safely between −40 °C and 85 °C. - **Comprehensive OS Support:** Compatible with DOS, Linux (2.4 x, 2.6 x), SCO OpenServer 5.06/5.07, and Microsoft Windows 2000, XP, 2003, and Vista (32‑/64‑bit). - **Plug‑and‑Play Installation:** IRQ and I/O addresses are automatically assigned by the system BIOS or operating system—no DIP switches or jumpers required. - **Industrial‑Grade Reliability:** Designed for continuous operation in automation, control, and data‑intensive environments.

Manufacturer: Sunix

Category: Professional Serial

- **Dual RS‑422/485 Ports:** Two independent serial ports supporting RS‑422 full‑duplex and RS‑485 half‑duplex communication modes. - **Universal PCI Interface:** Compliant with PCI versions 3.0, 2.3, and 2.2; supports both 32‑bit and 64‑bit PCI/PCI‑X buses at 33 MHz or 66 MHz. - **High‑Speed Data Transmission:** Configurable baud rates from 75 bps up to 921.6 Kbps per port. - **64‑Byte Hardware FIFO:** Each port includes a 64‑byte transmit/receive FIFO buffer, fully compatible with the industry‑standard 16C750 UART controller. - **Auto RS‑422/485 Detection and Switching:** SUNIX proprietary technology automatically detects and switches between RS‑422 and RS‑485 modes without manual jumper configuration. - **AHDC/CS™ Direction Control:** SUNIX Auto Hardware Direction Control/Carrier Sense technology automatically manages RS‑485 driver enable/disable timing, preventing bus collisions and ensuring precise data transmission. - **Embedded 15 kV ESD Protection:** Integrated electrostatic discharge protection on all signal lines for enhanced reliability in industrial environments. - **Unlimited Card Scalability:** Multiple IPC‑P2002 cards can be installed in a single system, limited only by available PCI slots. - **Software Flow Control:** Supports XON/XOFF software flow control for reliable data management. - **Wide OS Compatibility:** Drivers available for DOS, Linux (kernel 2.4/2.6), SCO OpenServer 5.06/5.07, and Microsoft Windows 2000, XP (32/64‑bit), 2003 (32/64‑bit), and Vista (32‑bit). - **Industrial‑Grade Design:** Operating temperature range of 0 °C to 70 °C and storage range of −40 °C to 85 °C. - **Compact Form Factor:** Low‑profile and standard bracket support for flexible installation in various chassis types. - **Long‑Term Reliability:** Backed by a 5‑year manufacturer warranty.

Manufacturer: Sunix

Category: Professional Serial

- **Dual Isolated Serial Ports:** Two independent RS‑422/485 ports with full‑duplex (RS‑422) and half‑duplex (RS‑485) operation. - **Universal PCI Interface:** Compliant with PCI Ver 3.0/2.3/2.2; supports both 3.3 V and 5 V signaling, 32‑bit/64‑bit PCI and PCI‑X buses at 33 MHz/66 MHz. - **High‑Speed Communication:** Supports baud rates from 75 bps up to 921.6 kbps for reliable high‑speed data transmission. - **Hardware FIFO Buffer:** 64‑byte hardware FIFO per port, 16C750‑compatible UART for efficient data handling and reduced CPU load. - **Optical Isolation:** 2.5 kV isolation for all signal and power lines, preventing ground loops and protecting against electrical noise. - **Surge Protection:** 600 W peak surge suppression per IEC 61000‑4‑5 standard, safeguarding connected devices from transient voltage spikes. - **ESD Protection:** Embedded 15 kV electrostatic discharge protection on all signal lines. - **Auto‑Detection & Switching:** Automatic RS‑422/RS‑485 mode detection and switching without jumpers or DIP switches. - **AHDC/CS™ Technology:** SUNIX Auto Hardware Direction Control/Carrier Sense technology for precise RS‑485 signal direction management and collision avoidance. - **Software Flow Control:** Supports XON/XOFF software flow control. - **Unlimited Scalability:** Supports installation of unlimited cards per system (limited only by available PCI slots). - **Wide OS Compatibility:** Drivers available for DOS, Linux 2.4/2.6, SCO OpenServer 5.06/5.07, Windows 2000/XP (32/64‑bit), Windows Server 2003 (32/64‑bit), and Windows Vista (32‑bit). - **Industrial‑Grade Design:** Engineered for harsh environments with operating temperature range 0 °C – 70 °C and storage range −40 °C – 85 °C. - **Long‑Term Reliability:** Backed by a 5‑year manufacturer warranty.

Manufacturer: Sunix

Category: Professional Serial

- **Four Independent RS‑422/485 Ports:** Provides four fully isolated serial channels for industrial communication, each configurable for RS‑422 full‑duplex or RS‑485 half‑duplex operation. - **Universal PCI Interface:** Compliant with PCI versions 3.0/2.3/2.2, supporting both 32‑bit and 64‑bit PCI and PCI‑X buses at 3.3 V or 5 V signaling, 33 MHz/66 MHz operation. - **High‑Speed Data Transmission:** Supports baud rates from 75 bps up to 921.6 kbps per port, suitable for high‑throughput industrial data exchange. - **64‑Byte Hardware FIFO (16C750 Compatible):** Each port includes a 64‑byte transmit/receive buffer for efficient data handling and reduced CPU overhead. - **SUNIX AHDC/CS™ Technology:** Proprietary Auto Hardware Direction Control with Carrier Sense automatically manages RS‑485 driver enable/disable timing, ensuring precise control of data direction and collision avoidance on 2‑wire buses. - **RS‑422/485 Auto Detect & Switching:** Automatically detects and switches between RS‑422 full‑duplex and RS‑485 half‑duplex modes without jumpers or manual configuration. - **Embedded 15 kV ESD Protection:** Integrated electrostatic discharge protection on all signal lines safeguards connected devices and ensures long‑term reliability. - **Unlimited Scalability:** Multiple IPC‑P2004 cards can be installed in a single system, limited only by available PCI slots. - **Software Flow Control:** Supports XON/XOFF software flow control for reliable data transmission. - **Wide Environmental Tolerance:** Operates from 0 °C to 70 °C, storage –40 °C to 85 °C, humidity 5 % to 95 % RH. - **Comprehensive OS Support:** Compatible with Windows 2000/XP/2003/Vista (32‑/64‑bit), DOS, Linux 2.4/2.6, and SCO OpenServer 5.06/5.07. - **CE and FCC Class B Certified:** Meets international electromagnetic compatibility and safety standards. - **5‑Year Warranty:** Long‑term manufacturer warranty ensures reliability and support for industrial deployments.

Manufacturer: Sunix

Category: Professional Serial

- **Four Independent RS‑422/485 Ports:** Provides four fully isolated serial channels supporting both RS‑422 full‑duplex and RS‑485 half‑duplex communication modes. - **Universal PCI Interface:** Compliant with PCI Ver. 3.0/2.3/2.2 standards; supports both 32‑bit and 64‑bit PCI and PCI‑X buses at 33 MHz/66 MHz, 3.3 V or 5 V signaling. - **High‑Speed Data Transmission:** Supports baud rates from 75 bps up to 921.6 Kbps per port, suitable for high‑throughput industrial communication. - **Hardware FIFO Buffer:** Each port includes a 64‑byte hardware FIFO buffer, 16C750‑compatible UART for efficient data handling and reduced CPU load. - **2.5 kV Optical Isolation:** Provides galvanic isolation between the host system and serial interfaces, protecting against ground loops and electrical noise. - **600 W Surge Protection (IEC 61000‑4‑5):** Built‑in surge suppression circuitry protects against transient voltage spikes and power surges. - **Embedded 15 kV ESD Protection:** Ensures robust electrostatic discharge immunity for all signal lines. - **Auto Detect & Switching RS‑422/485:** Automatically detects and configures the port for RS‑422 or RS‑485 operation without manual jumper or DIP switch settings. - **SUNIX AHDC/CS™ Technology:** Auto Hardware Direction Control/Carrier Sense automatically manages RS‑485 data direction, preventing bus collisions and ensuring precise timing. - **Unlimited Card Installation:** Multiple IPC‑P2004SI cards can be installed in a single system, limited only by available PCI slots. - **Software Flow Control:** Supports XON/XOFF software flow control for reliable data transmission. - **Wide Environmental Range:** Operates from 0 °C to 70 °C; storage temperature from –40 °C to 85 °C; humidity 5 %–95 % RH. - **Cross‑Platform Driver Support:** Compatible with Windows 2000/XP/2003/Vista (32‑/64‑bit), DOS, Linux 2.4/2.6, and SCO OpenServer 5.06/5.07. - **Industrial‑Grade Reliability:** Designed for continuous operation in harsh environments such as factory automation, process control, and instrumentation.

Manufacturer: Sunix

Category: Professional Serial

- **Eight Independent Serial Ports:** Provides 8 fully independent RS‑422/485 communication channels for simultaneous multi‑device connectivity. - **Universal PCI Interface:** Compliant with PCI Ver. 3.0/2.3/2.2 standards; supports both 32‑bit and 64‑bit PCI and PCI‑X buses at 33 MHz or 66 MHz. - **High‑Speed Communication:** Supports baud rates from 75 bps up to 921.6 Kbps per port, ensuring reliable high‑speed data transfer. - **64‑Byte Hardware FIFO:** Each port includes a 64‑byte hardware FIFO buffer, 16C750‑compatible, for efficient data handling and reduced CPU load. - **Auto RS‑422/485 Detection and Switching:** SUNIX proprietary technology automatically detects and switches between RS‑422 full‑duplex and RS‑485 half‑duplex modes without jumper or DIP switch configuration. - **AHDC/CS™ Technology:** SUNIX Auto Hardware Direction Control/Carrier Sense automatically manages RS‑485 signal direction, ensuring precise timing and collision avoidance on 2‑wire buses. - **Embedded 15 kV ESD Protection:** Integrated electrostatic discharge protection on all signal lines safeguards connected devices and ensures long‑term reliability. - **Unlimited Card Scalability:** Multiple IPC‑P2008 cards can be installed in a single system, limited only by available PCI slots. - **Software Flow Control:** Supports XON/XOFF software flow control for flexible communication management. - **Wide OS Compatibility:** Drivers available for Windows 2000/XP/2003/Vista (32‑/64‑bit), Linux 2.4/2.6, SCO OpenServer 5.06/5.07, and DOS. - **Industrial‑Grade Reliability:** Designed for continuous operation in industrial environments with operating temperature range 0 °C – 70 °C and humidity tolerance up to 95 % RH. - **Compact Form Factor:** Standard PCI card dimensions (63.5 × 120 mm) suitable for standard and low‑profile brackets. - **Long‑Term Warranty:** Backed by a 5‑year manufacturer warranty.

Manufacturer: Sunix

Category: Professional Serial

- **Eight Independent RS‑422/485 Ports:** Supports simultaneous communication across eight isolated serial channels. - **Universal PCI Interface:** Compatible with PCI Ver. 3.0 / 2.3 / 2.2, supporting both 3.3 V and 5 V signaling, and PCI‑X 33 MHz / 66 MHz operation. - **High‑Speed Data Transfer:** Baud rates from 75 bps up to 921.6 Kbps per port. - **Matrix Single‑Chip UART Controller:** 16C750‑compatible design with 64‑byte hardware FIFO for each port, ensuring low latency and high throughput. - **2.5 kV Optical Isolation:** Provides galvanic isolation for all signal and power lines, preventing ground loops and protecting against electrical noise. - **600 W Surge Protection:** Built‑in transient suppression per IEC 61000‑4‑5 standard, safeguarding connected devices from high‑energy surges. - **Embedded 15 kV ESD Protection:** Protects all signal lines from electrostatic discharge damage. - **Auto Detect & Switching Technology:** Automatically detects and switches between RS‑422 full‑duplex and RS‑485 half‑duplex modes without manual jumper configuration. - **SUNIX AHDC/CS™ Technology:** Hardware‑based automatic direction control for RS‑485 2‑wire communication, ensuring precise timing and collision avoidance. - **Software Flow Control:** Supports XON/XOFF for reliable data transmission. - **Unlimited Card Scalability:** Multiple IPC‑P2008SI cards can be installed in a single system, limited only by available PCI slots. - **Wide OS Compatibility:** Drivers available for Windows 2000/XP/2003/Vista (32/64‑bit), Linux 2.4/2.6, SCO OpenServer 5.06/5.07, and DOS. - **Industrial‑Grade Design:** Operating temperature range 0 °C – 70 °C, storage −40 °C – 85 °C, and humidity tolerance 5 % – 95 % RH. - **CE and FCC Class B Certified:** Meets international electromagnetic compatibility and safety standards. - **5‑Year Warranty:** Long‑term reliability backed by SUNIX’s industrial support program.

Manufacturer: Sunix

Category: Professional Serial

- **3‑in‑1 Serial Interface Support:** Each of the four ports can independently operate as RS‑232, RS‑422, or RS‑485, selectable automatically without jumpers. - **High‑Speed Communication:** Supports baud rates from 75 bps up to 921.6 Kbps per port. - **Matrix UART Controller:** Single‑chip ASIC design with integrated 16C750‑compatible UARTs and 64‑byte hardware FIFO for each port, ensuring low latency and high throughput. - **Auto Detect & Switching Technology:** Automatically detects and switches between RS‑422 full‑duplex and RS‑485 half‑duplex modes without manual configuration. - **AHDC/CS™ Direction Control:** SUNIX’s proprietary Auto Hardware Direction Control/Carrier Sense technology automatically manages RS‑485 signal direction, preventing data collisions and ensuring precise timing. - **Universal PCI Compatibility:** Works with both 3.3V and 5V PCI slots, including PCI‑X 33/66 MHz systems. - **Embedded ESD Protection:** 15 kV electrostatic discharge protection on all signal lines for enhanced reliability in industrial environments. - **Unlimited Scalability:** Supports installation of multiple cards in a single system (limited only by available PCI slots). - **Software Flow Control:** XON/XOFF supported for reliable data transmission. - **Plug‑and‑Play Configuration:** IRQ and I/O addresses automatically assigned by the system BIOS or operating system. - **Cross‑Platform Driver Support:** Compatible with Windows 2000/XP/2003/Vista (32/64‑bit), DOS, Linux 2.4/2.6, and SCO OpenServer 5.06/5.07. - **Industrial‑Grade Design:** Operating temperature range of 0°C to 70°C and storage range of ‑40°C to 85°C. - **Long‑Term Reliability:** Backed by a 5‑year manufacturer warranty.

Manufacturer: Sunix

Category: Professional Serial

- **Dual RS232 Ports:** Provides two independent RS232 serial communication ports per card. - **High-Speed Communication:** Supports baud rates from 50 bps up to 115,200 bps per port. - **Advanced Controller:** Built around the Moschip MCS9922 serial communication controller, ensuring compatibility and stable performance. - **PCI Express Interface:** Fully compliant with PCI Express bus architecture, offering plug-and-play installation and automatic resource allocation by the PCI BIOS. - **Memory-Mapped I/O:** Both I/O and memory mapping are automatically assigned by the PCI BIOS, simplifying configuration. - **DB9 Male Connectors:** Each port is equipped with a standard DB9 male connector for direct connection to RS232 devices. - **Industrial-Grade Design:** Engineered for industrial environments with extended temperature and humidity tolerance. - **Cross-Platform Support:** Compatible with multiple operating systems including Windows 2000, XP, Vista, Windows 7, and Linux. - **Low-Profile Option:** Optional low-profile bracket available for compact or embedded systems. - **Upgradeable Family:** Part of a modular product line allowing easy upgrade to isolated or multi-interface models (e.g., A102I, A112, A132). - **Plug & Play Configuration:** No manual IRQ or address setting required; all resources are assigned automatically by the system BIOS. - **Reliable Data Handling:** Incorporates 128-byte transmit and receive buffers per port to reduce CPU interrupts and improve throughput. - **Industrial Control Ready:** Designed for use in automation, process control, and data logging systems.

Manufacturer: Rayon

Category: RS232 2-Ports PCI

- **Dual Isolated RS‑232 Ports:** Two independent RS‑232 serial channels, each with galvanic ground isolation to prevent ground loops and electrical interference between connected devices. - **PCI Express Interface:** Fully compliant with PCIe bus architecture, supporting plug‑and‑play installation and automatic resource assignment (I/O, memory, IRQ) by the system BIOS. - **High‑Performance Controller:** Built around the Moschip MCS9922 serial communication controller, compatible with 16950A UART architecture, providing advanced buffering and flow control. - **Wide Baud Rate Range:** Each port supports programmable baud rates from 50 bps up to 115,200 bps, suitable for a wide range of serial devices. - **DB9 Male Connectors:** Standard 9‑pin male D‑sub connectors for direct connection to RS‑232 equipment. - **Ground Isolation:** Electrical isolation between ports and host system ensures reliable operation in electrically noisy or multi‑ground environments. - **Operating System Support:** Compatible with Windows 2000, XP, 2003, Vista, Windows 7, and Linux distributions (Red Hat, SUSE, Slackware, Fedora Core). - **Compact Form Factor:** Standard PCIe card dimensions with optional low‑profile bracket for small form factor PCs. - **Industrial Reliability:** Designed for continuous operation in industrial temperature and humidity ranges. - **Plug & Play Configuration:** Automatic detection and configuration by PCI BIOS; no manual jumper settings required.

Manufacturer: Rayon

Category: RS232 2-Ports PCI

- **Dual RS232 Ports:** Two independent serial ports per card, each configurable and isolated. - **Ground Isolation:** Each RS232 interface is electrically isolated to protect the host system from ground loops and electrical surges. - **ASIX MCS9865 Controller:** High-performance UART controller compatible with 16950A standard, supporting advanced buffering and high-speed data transfer. - **Configurable Baud Rate:** Each port supports baud rates from **50 bps to 230,400 bps**, suitable for a wide range of serial devices. - **Plug & Play PCI Interface:** Fully compliant with PCI specifications; I/O, memory, and IRQ resources are automatically assigned by the system BIOS. - **DIP Switch Configuration:** Each port can be individually configured using onboard DIP switches for flexible deployment. - **DB9 Male Connectors:** Standard 9-pin male connectors for direct connection to serial devices. - **Operating System Support:** Compatible with **Windows 2000, XP, Vista, 7, 8**, and **Linux** distributions. - **Industrial-Grade Design:** Designed for industrial control systems, automation, and embedded applications requiring robust serial communication. - **Low Profile Option:** Optional low-profile bracket available for compact or rack-mounted systems. - **Single Voltage Operation:** Operates on **5V PCI bus** only, ensuring stable performance in standard PCI slots. - **Ground-Isolated RS232 Interface:** Prevents electrical interference and protects the motherboard from voltage spikes. - **Wide Environmental Tolerance:** Operates in temperatures from 0°C to 55°C and humidity up to 95% RH.

Manufacturer: Rayon

Category: RS232 2-Ports PCI

- **Dual Ground-Isolated RS232 Ports:** Each of the two serial ports is independently isolated from system ground, protecting the host PC and connected devices from ground loops, surges, and electrical noise. - **ASIX MCS9865-Compatible Controller:** Utilizes the ASIX MCS9865 serial communication controller, ensuring compatibility with a wide range of operating systems and providing stable, high-speed data transfer. - **Selectable Port Configuration:** Each port can be configured individually via DIP switches, allowing flexible setup for different communication requirements. - **High-Speed Communication:** Supports baud rates from **50 bps up to 230,400 bps**, suitable for both legacy and modern serial devices. - **Plug & Play PCI Interface:** Fully compliant with PCI Plug & Play standards. I/O address, memory mapping, and IRQ assignments are automatically managed by the PCI BIOS. - **Broad OS Compatibility:** Supports **Windows 2000, XP, Vista, Windows 7/8**, and **Linux** operating systems. - **Industrial-Grade Design:** Designed for industrial control environments with robust isolation and wide environmental tolerance. - **Compact Form Factor:** Standard PCI card dimensions (100 × 97 mm) with optional low-profile bracket for compact systems. - **Single Voltage Operation:** Operates on **5V PCI bus power only**, simplifying system integration.

Manufacturer: Rayon

Category: RS232 2-Ports PCI

- **Dual RS232 Ports:** Provides two independent RS232 serial communication interfaces, each accessible via a standard DB9 male D-sub connector. - **PCI Express Interface:** Fully compliant with PCI Express (PCIe) bus architecture, ensuring high-speed data transfer and compatibility with modern motherboards. - **High-Speed Communication:** Supports data rates up to **921.6 kBd**, enabling fast and reliable serial data transmission for demanding applications. - **Advanced UART Controller:** Equipped with a **16550-compatible UART** featuring a **128-byte FIFO buffer**, minimizing CPU load and improving data handling efficiency. - **Multi-Board Support:** Allows installation of up to **four COM-8502 boards per PC**, expanding the number of available serial ports for complex systems. - **Low Power Requirement:** Operates solely on **3.3V DC power** supplied through the PCIe slot, eliminating the need for external power sources. - **Compact Form Factor:** Designed with a **PCB size of 114 mm x 104 mm**, suitable for standard PCIe slots in desktop and industrial PCs. - **Industrial Reliability:** Built with high-quality components and robust PCB design to ensure stable operation in continuous-use environments. - **Plug-and-Play Configuration:** Supports automatic resource allocation and easy driver installation for quick system integration. - **Compatibility:** Works with a wide range of operating systems and supports standard serial communication protocols.

Manufacturer: JS Automation

Category: RS232 2-Ports PCI