- **Wide Input Range:** Accepts 85 V DC to 264 V DC input, allowing flexible deployment in global industrial power environments. - **Regulated Output:** Provides a stable 5 V DC output suitable for powering F&eIT controllers, servers, and device modules. - **Compact Industrial Design:** Shares the F&eIT mechanical form factor (approx. 52.4 × 64.7 × 94 mm), enabling DIN‑rail mounting alongside other system components. - **High Reliability:** Designed for continuous operation in industrial control panels, with noise immunity compliant to IEC 1000‑4‑4 Level 3 / EN 61000‑4‑4 Level 3. - **Thermal and Environmental Robustness:** Operates from 0 °C to 50 °C and 10 – 90 % RH (non‑condensing). - **Safety and EMC Compliance:** Meets CE and FCC Class A requirements for industrial equipment. - **Integration with F&eIT Series:** Optimized for powering CONTEC’s CPU‑SBxx(FIT)GY microcontrollers, CPU‑CAxx(FIT)GY I/O controllers, SVR‑IOA(FIT)GY assist servers, and SVR‑MMF(FIT)GY monitoring servers. - **DIN‑Rail Mounting Mechanism:** One‑touch installation/removal for easy maintenance. - **Lightweight Construction:** Approximately 150 g, minimizing load on control panels. - **Maintenance‑Free Operation:** Fanless, convection‑cooled design ensures silent and reliable performance.

Manufacturer: Contec

Category: Contec System

- **Wide AC Input Range:** Accepts 85 to 132 VAC, suitable for standard 100 V AC industrial mains. - **Stable 5 VDC Output:** Provides 5.0 V ± 5 % regulated DC output for logic‑level and embedded devices. - **High Output Current:** Delivers up to 3.0 A continuous current, sufficient for multiple stacked F&eIT modules (total load ≤ 3 A). - **Compact DIN‑Rail Form Factor:** 52.4 (W) × 64.7 (D) × 94.0 (H) mm housing matches the mechanical profile of other F&eIT components for seamless panel integration. - **Lightweight Construction:** Only 150 g, minimizing load on DIN‑rail assemblies. - **Industrial Reliability:** Designed for 0 – 50 °C operation, 10 – 90 % RH (non‑condensing), and compliance with IEC 1000‑4‑4 Level 3 / EN 61000‑4‑4 Level 3 noise‑immunity standards. - **Front‑Access Connectors:** Two‑piece removable power connector with FG (ground) terminal simplifies wiring and maintenance. - **System Compatibility:** Provides the standard 5 VDC bus voltage required by all F&eIT controllers, servers, and device modules. - **Safety and EMC Compliance:** Meets CE and FCC Class A requirements for industrial environments. - **Maintenance‑Free Design:** Fanless, convection‑cooled operation ensures silent, dust‑resistant performance.

Manufacturer: Contec

Category: Contec System

- **Wide Input Range:** Accepts 85 – 264 V AC, supporting both 100 V and 240 V mains environments without manual switching. - **Stable 5 V DC Output:** Provides a regulated 5 V DC output with ±5 % tolerance, rated at 3.0 A maximum continuous current. - **Compact DIN‑Rail Design:** 25.2 mm (W) × 64.7 mm (D) × 94.0 mm (H) housing enables installation in confined control panels. - **Optimized for F&eIT Systems:** Designed to power CONTEC’s F&eIT microcontrollers, I/O controllers, servers, and device modules. - **Industrial Reliability:** Built to withstand industrial noise levels (IEC 1000‑4‑4 Level 3 / EN 61000‑4‑4 Level 3) and environmental conditions typical of factory automation. - **Lightweight Construction:** Weighs only 110 g, minimizing load on DIN rails and simplifying integration in distributed systems. - **High Efficiency and Low Heat:** Fanless operation with natural convection cooling ensures silent, maintenance‑free performance. - **Safety and Compliance:** Meets CE and FCC Class A standards for industrial electronic equipment. - **Plug‑and‑Play Integration:** Compatible with all F&eIT modules through standardized 5 V DC connectors and stackable bus architecture. - **Extended Operating Range:** Operates reliably from 0 °C to 50 °C and 10 – 90 % RH (non‑condensing).

Manufacturer: Contec

Category: Contec System

- **Dedicated Power Source for RP‑COM and F&eIT Devices:** Supplies regulated 5 V DC power to RP‑COM(FIT)GY, RP‑422(FIT)GY, RP‑GPIB(FIT)GY, and other F&eIT modules. - **Compact Industrial Design:** Ultra‑small form factor (approx. 52.4 × 64.7 × 94 mm) suitable for DIN‑rail mounting in control panels or embedded systems. - **High Reliability:** Designed for continuous industrial operation with wide input voltage tolerance and noise immunity compliant with IEC1000‑4‑4 Level 3. - **Flexible Input Options:** Available in both AC‑DC and DC‑DC configurations to accommodate various installation environments. - **Stable 5 V DC Output:** Provides up to 3 A continuous current (model‑dependent) for powering multiple stacked device modules. - **Seamless Integration:** Fully compatible with CONTEC’s F&eIT Bus architecture, enabling simple stacking and modular expansion without backplanes. - **DIN‑Rail Mounting Mechanism:** Standard 35 mm DIN‑rail clip allows quick installation and removal using a flat‑head screwdriver. - **Industrial‑Grade Environmental Tolerance:** Operates from 0 °C to 50 °C with 10–90 % RH non‑condensing humidity range. - **Safety and Compliance:** Meets CE and FCC Class A standards for industrial environments.

Manufacturer: Contec

Category: Contec System

- **Dedicated Power Source for RP‑COM:** Supplies regulated DC power to RP‑COM(FIT)GY and related communication modules. - **Compact Industrial Design:** Matches the F&eIT Series form factor (DIN‑rail mountable, 94 mm height × 64.7 mm depth) for uniform installation. - **High Reliability:** Designed for continuous industrial operation with wide input voltage tolerance and noise immunity compliant with IEC1000‑4‑4 Level 3. - **Flexible Input Options:** Available in both AC‑DC and DC‑DC configurations to suit various installation environments. - **Stable 5 V DC Output:** Provides regulated 5 V DC ± 5 % output for powering F&eIT modules, controllers, and servers. - **Safety and Compliance:** Meets CE and FCC Class A standards for industrial electronic equipment. - **DIN‑Rail Mounting Mechanism:** Enables quick installation and removal using a standard 35 mm DIN rail. - **Lightweight and Space‑Saving:** Designed for compact control panels and embedded systems. - **Interoperability:** Fully compatible with F&eIT Bus architecture, ensuring seamless power distribution to stacked device modules. - **Industrial Durability:** Operates in environments from 0 °C to 50 °C with humidity up to 90 % RH (non‑condensing).

Manufacturer: Contec

Category: Contec System

- **Wide Input Range:** Accepts 10 to 30 V DC, suitable for 12 V and 24 V industrial power systems. - **Stable 5 V DC Output:** Provides a regulated 5 V DC ± 5 % output with a maximum current of 3 A, ensuring stable operation of connected F&eIT modules. - **DIN‑Rail Mountable:** Compact housing with integrated 35 mm DIN‑rail clip for quick installation in control panels or equipment racks. - **High Reliability:** Designed for continuous industrial operation with low noise, high isolation, and robust protection against line disturbances. - **Compact Form Factor:** 52.4 (W) × 64.7 (D) × 94.0 (H) mm, enabling dense installation alongside other F&eIT components. - **Lightweight Construction:** Approximately 150 g, minimizing mechanical load on DIN rails. - **Optimized for F&eIT Systems:** Provides the standard 5 V DC bus voltage required by CONTEC’s modular controllers and device modules. - **Industrial‑Grade Environmental Tolerance:** Operates from 0 to 50 °C and 10 to 90 % RH (non‑condensing). - **Noise Immunity:** Meets IEC 1000‑4‑4 Level 3 / EN 61000‑4‑4 Level 3 standards (AC line 2 kV, signal line 1 kV). - **Safety Grounding:** D‑type (former Class 3) ground terminal for stable reference and noise suppression.

Manufacturer: Contec

Category: Contec System

- **Wide DC Input Range:** Accepts 30 – 50 V DC, suitable for industrial and field power environments. - **Stable 5 V DC Output:** Provides a regulated 5 V DC ± 5 % output with a maximum current of 3 A, ideal for powering multiple F&eIT modules. - **Compact DIN‑rail Form Factor:** 25.2 (W) × 64.7 (D) × 94.0 (H) mm housing allows easy integration into control panels. - **High Reliability:** Designed for continuous industrial operation with wide temperature and humidity tolerance. - **Noise Immunity:** Meets IEC 1000‑4‑4 Level 3 / EN 61000‑4‑4 Level 3 standards for line and signal noise resistance. - **Safety and Grounding:** D‑type (former Class 3) grounding ensures stable operation in noisy environments. - **Seamless Integration:** Fully compatible with CONTEC’s F&eIT microcontrollers, I/O controllers, servers, and device modules. - **Maintenance‑Free Operation:** Fanless, solid‑state design with no moving parts. - **DIN‑rail Mounting Mechanism:** Quick installation and removal using a flat‑head screwdriver. - **Lightweight Construction:** Approximately 100 g, minimizing load on DIN‑rail assemblies.

Manufacturer: Contec

Category: Contec System

- **Four Independent Temperature Channels:** Supports simultaneous measurement on four Pt100 or JPt100 RTD sensors. - **High Accuracy and Resolution:** 0.01 °C resolution with ±0.15 °C accuracy (15–35 °C ambient) or ±0.3 °C (0–50 °C ambient). - **Wide Measurement Range:** - Pt100: –200 °C to +850 °C - JPt100: –200 °C to +510 °C - **Selectable Wiring:** Compatible with both 3‑wire and 4‑wire RTD configurations. - **Digital Linearization:** Internal linearization compensates for the nonlinear resistance‑temperature relationship of RTDs. - **Averaging and Filtering:** Time‑ or count‑based averaging and a 50/60 Hz digital noise filter (at 150 ms conversion) for stable readings. - **Disconnection Detection:** Per‑channel open‑circuit detection with LED error indication. - **Offset and Gain Calibration:** User‑programmable correction values stored in onboard flash memory (100,000 write cycles). - **Alarm Output Function:** Programmable upper/lower threshold alarms with latch and non‑latch modes. - **High‑Speed Conversion:** Selectable conversion speeds of 150 ms, 40 ms, or 5 ms per channel. - **Compact DIN‑Rail Design:** 25.2 (W) × 64.7 (D) × 94.0 (H) mm, 100 g, stackable without a backplane. - **Industrial‑Grade Isolation:** Photocoupler isolation between sensor inputs and power supply for noise immunity. - **Integration Flexibility:** Operates with CONTEC CPU‑SBxx(FIT)GY microcontrollers, CPU‑CAxx(FIT)GY I/O controllers, or SVR‑MMF(FIT)GY monitoring servers. - **Software Support:** Fully supported by CONTEC’s Windows® driver libraries (API‑SBP(W32), API‑CAP(W32), API‑USBP(WDM)) and F&eIT protocol for Ethernet communication. - **Web‑Based Monitoring:** When used with SVR‑MMF(FIT)GY, data can be viewed and managed via a standard web browser.

Manufacturer: Contec

Category: Contec System

- **Ethernet Connectivity:** Provides network-based control of four independent relay outputs via standard Ethernet communication protocols. - **Four Isolated Reed Relay Outputs:** Each output channel is electrically isolated, ensuring safe and interference-free operation in multi-channel control systems. - **High Switching Capacity:** Supports up to **125 VAC** or **30 VDC** at **2 A** per channel, suitable for controlling small motors, solenoids, indicators, and other low-power devices. - **DIN Rail Mounting:** Compact industrial design for easy installation in control panels and enclosures. - **Galvanic Isolation:** Electrical isolation between channels and communication interface enhances system reliability and protects against voltage surges. - **Industrial Reliability:** Designed for continuous operation in demanding environments, with robust construction and stable performance. - **Remote Control and Monitoring:** Enables remote actuation of devices through Ethernet, ideal for distributed I/O systems and SCADA integration. - **Compact Form Factor:** Space-saving design suitable for dense control cabinets or modular automation setups. - **Low Power Consumption:** Efficient circuitry minimizes heat generation and energy use. - **Manufacturer Support:** Backed by Contec’s industrial automation expertise and global support network.

Manufacturer: Contec

Category: Contec System

- **Eight Auto‑Negotiating Ethernet Ports:** Supports 10BASE‑T and 100BASE‑TX with automatic speed and duplex detection. One port can function as an uplink port for cascading or connection to higher‑level network infrastructure. - **Compact Industrial Design:** Dimensions of 52.4 (W) × 64.7 (D) × 94.0 (H) mm and weight of 250 g make it suitable for embedded or panel‑mounted installations. - **DIN‑Rail Mounting:** Equipped with a 35 mm DIN‑rail mounting mechanism for quick installation in control panels or machine enclosures. - **Robust Power Input:** Operates on 5 V DC ± 5 %, with a maximum current draw of 1.2 A. FG (frame ground) terminal provided for noise suppression and safety grounding. - **Industrial‑Grade Environmental Tolerance:** Operating temperature range of 0 °C to 50 °C and humidity tolerance of 10 % to 90 % RH (non‑condensing). - **High‑Performance Switching Engine:** Store‑and‑forward switching method with an 8,192‑entry MAC address table ensures efficient packet handling and low latency. - **Full/Half Duplex Operation:** Each port supports both full‑ and half‑duplex modes with IEEE 802.3x flow control (full‑duplex) and back‑pressure control (half‑duplex). - **Seamless Integration with F&eIT Systems:** Designed for use with CONTEC’s F&eIT controllers, servers, and device modules, enabling distributed monitoring and control networks. - **Reliability and Safety:** Complies with IEC 1000‑4‑4 Level 3 and EN 61000‑4‑4 Level 3 noise immunity standards. - **Lightweight and Maintenance‑Free:** Fanless, solid‑state design ensures silent operation and long‑term reliability in industrial environments.

Manufacturer: Contec

Category: Contec System

- **Web‑based Remote Monitoring:** Built‑in web server (Java applet) allows real‑time I/O monitoring and updates directly through a standard web browser. - **Programless Configuration:** GUI‑based setup enables users to design monitoring screens using standard components (graphs, sliders, switches, meters) without coding. - **Automatic Cyclic Data Collection:** Periodically polls up to eight I/O Controller Units (CPU‑CAx(FIT)GY) and aggregates their data for efficient host communication. - **Ethernet Integration:** Supports 100BASE‑TX/10BASE‑T Ethernet interface for high‑speed, reliable data transfer. - **Compact DIN‑rail Design:** Ultra‑compact 25.2 (W) × 64.7 (D) × 94.0 (H) mm enclosure with front‑mounted connectors for easy installation and maintenance. - **Fanless, Low‑Power Operation:** Consumes minimal power (5 VDC ± 5%, 0.5 A max) and operates silently without active cooling. - **High Reliability:** Industrial‑grade design with wide operating temperature range (0 – 50 °C), humidity tolerance (10 – 90 % RH, non‑condensing), and noise immunity compliant with IEC1000‑4‑4 Level 3 / EN61000‑4‑4 Level 3. - **Scalable Network Architecture:** Up to eight SVR‑IOA(FIT)GY units can coexist in the same IP segment, managing a total of 64 I/O Controller Units. - **DDE/SuiteLink Compatibility:** Communicates with SCADA/HMI software such as Microsoft® Excel or Wonderware InTouch® via DDE and SuiteLink protocols. - **Integration with F&eIT Ecosystem:** Fully compatible with CONTEC’s I/O Controllers, Device Modules, Monitoring & Control Servers, Security Servers, and Power Supply Series.

Manufacturer: Contec

Category: Contec System

- **Remote Monitoring and Control:** Enables centralized supervision of multiple remote I/O systems via Ethernet. Supports web‑based monitoring, data logging, and alarm notification. - **Web‑based Configuration:** All setup and monitoring functions are accessible through a standard web browser. No dedicated software is required for basic operation. - **Compact DIN‑Rail Design:** Ultra‑compact housing (approx. 94 mm H × 64.7 mm D × 52.4 mm W) allows installation in control panels or confined spaces. - **Industrial Reliability:** Fanless, diskless design with watchdog timer and wide operating temperature range (0 – 50 °C). Resistant to line noise and static discharge per IEC/EN standards. - **Ethernet Integration:** 10BASE‑T/100BASE‑TX interface for seamless integration with existing LANs and Internet‑connected systems. - **Automatic Data Collection:** Cyclically polls connected I/O controllers, aggregates data, and transmits it to host systems, reducing network load. - **Programless Web Monitoring:** Built‑in Java applet web server allows creation of graphical monitoring screens (meters, sliders, graphs) directly in the browser. - **Scalable Architecture:** Supports up to eight I/O controller units per server and up to eight servers per network segment (total 64 controllers). - **Security and Maintenance:** Password‑protected access, SNMP agent support, and optional firewall integration via CONTEC Security Server modules. - **Interoperability:** Compatible with CONTEC I/O Controllers (CPU‑CAxx(FIT)GY), Device Modules, and Power Supply Series.

Manufacturer: Contec

Category: Contec System