- **Four Gigabit Ethernet Ports:** Equipped with four Intel® I350-AM4 controllers, each supporting full Gigabit bandwidth, IEEE 1588 precision time protocol, and 9.5 KB jumbo frames for high-throughput data transmission. - **PoE+ Power Delivery:** Fully compliant with IEEE 802.3at-2009 (PoE+) standard, each port can deliver up to 25.5 W of power to connected devices such as IP cameras, sensors, or industrial controllers. - **Total Power Budget:** 75 W total PoE power budget, optimized for multi-camera or multi-device setups. - **Low-Profile Design:** Compact 167.7 mm x 69 mm form factor suitable for 2U rackmount servers and space-constrained systems. - **1 kV Surge and 8 kV ESD Protection:** Built-in surge protection compliant with IEC 61000-4-5 Class 2, ensuring durability in harsh industrial or outdoor environments. - **Advanced Networking Features:** Supports teaming, link aggregation, checksum offloading, segmentation offloading, and intelligent interrupt moderation to reduce CPU load and enhance throughput. - **Jumbo Frame Support:** Up to 9.5 KB frame size for efficient large-packet data transmission, ideal for high-resolution video streaming or machine vision data. - **IEEE 1588 Support:** Enables precise time synchronization across networked devices, critical for multi-camera or distributed control systems. - **Server-Grade Reliability:** Designed for continuous operation in industrial and commercial environments with 0°C to 55°C operating range (with airflow). - **Compatibility:** Works with standard CAT-5e or CAT-6 cables up to 100 meters.

Manufacturer: Neousys Technology

Category: Frame Grabber

- **PCI Express Gen2 x4 Interface:** Provides up to 2 GB/s total bandwidth, ensuring high-speed data transfer between the card and host system. - **Dual Intel® I350-AM2 Gigabit Ethernet Controllers:** Each port supports full Gigabit Ethernet throughput with advanced offloading features for optimized CPU utilization. - **IEEE 802.3at-2009 (PoE+) Compliance:** Each of the two ports can deliver up to **25.5 W** of power to connected PoE devices, such as cameras or sensors. - **Per-Port PoE Power Control:** Software-controllable power on/off for each port, allowing remote reset or power cycling of connected devices. - **Jumbo Frame Support:** Supports Ethernet jumbo frames up to **9.5 kB**, improving throughput and reducing CPU overhead for large data transfers. - **IEEE 1588 Precision Time Protocol (PTP):** Enables precise time synchronization across networked devices, essential for multi-camera or distributed vision systems. - **Link Aggregation and Teaming:** Supports network teaming for redundancy or bandwidth aggregation. - **Server-Grade Reliability:** Built with Intel’s enterprise-class Ethernet controller for long-term stability and compatibility with industrial systems. - **Compact PCIe Form Factor:** Standard PCIe x4 card dimensions (167.7 mm x 111.2 mm) suitable for most industrial PCs and servers.

Manufacturer: Neousys Technology

Category: Frame Grabber

- **PCI Express Interface:** x4, Gen2 PCIe interface providing up to 2 GB/s total bandwidth. - **Server-Grade Ethernet Controller:** Utilizes Intel® I350-AM4 controller for superior reliability and performance. - **Four Independent Gigabit Ports:** Each port supports 10/100/1000 Mbps operation with full-duplex capability. - **IEEE 802.3at PoE+ Compliance:** Delivers up to 25.5 W per port, enabling direct power supply to PoE devices such as cameras and sensors. - **Per-Port PoE Power Control:** Software-controllable on/off switching for each PoE port, allowing remote device reset and power management. - **Advanced Networking Features:** - Jumbo frame support up to 9.5 KB - Link aggregation (teaming) for bandwidth scaling and redundancy - IEEE 1588 Precision Time Protocol (PTP) for time synchronization - Checksum and segmentation offloading to reduce CPU load - Intelligent interrupt moderation for optimized throughput - **Flexible Power Input:** Selectable 12 VDC source from PCIe bus or external 4-pin connector via jumper configuration. - **High Compatibility:** Single-bus, multi-port topology minimizes motherboard compatibility issues when multiple cards are installed. - **Industrial-Grade Design:** Operating temperature range of 0°C to 55°C with airflow, suitable for embedded and industrial environments. - **Applications:** Machine vision, automated optical inspection (AOI), surveillance, medical imaging, and traffic enforcement systems.

Manufacturer: Neousys Technology

Category: Frame Grabber

- **Four Independent Gigabit Ethernet Ports:** Equipped with four Intel® 82574L GbE controllers, each port supports full-duplex 1000 Mb/s operation, ensuring high throughput for data-intensive applications. - **Power over Ethernet (PoE) Support:** Fully compliant with IEEE 802.3af standard, each port can deliver up to 15.4 W of power to connected PoE devices such as cameras, sensors, or network modules. - **PCI Express x4 Interface:** Utilizes a PCIe x4 interface providing a total bandwidth of 1 GB/s, ensuring stable and high-speed communication between the card and host system. - **9 kB Jumbo Frame Support:** Enables efficient transmission of large data packets, reducing CPU load and improving overall data throughput—ideal for high-resolution image acquisition. - **Link Aggregation (Teaming):** Supports link aggregation for increased bandwidth and redundancy, allowing multiple ports to operate as a single logical link. - **Extended Cable Length:** Supports CAT-5e or CAT-6 cables up to 100 meters, providing flexibility in system layout and camera placement. - **External Power Input:** Features an onboard 4-pin power connector for additional +12V input, ensuring stable PoE power delivery across all four ports. - **Industrial-Grade Design:** Designed for continuous operation in industrial environments with an operating temperature range of 0°C to 60°C (with airflow). - **Driver and Utility Support:** Includes Neousys Drivers & Utilities DVD with “One-Click” driver installation for Windows XP, Vista, and Windows 7 (32/64-bit).

Manufacturer: Neousys Technology

Category: Frame Grabber

- **Dual 10GbE Ports:** Equipped with two Intel® X550-AT2 10 Gigabit Ethernet controllers, enabling simultaneous high-speed data transmission across two independent channels. - **PCI Express Gen3 x4 Interface:** Ensures high data throughput and compatibility with modern industrial PCs and servers. - **IEEE 802.3at PoE+ Support:** Provides up to **25.5W per port**, allowing direct power delivery to connected devices such as cameras, access points, or sensors via Ethernet cables. - **Cable Compatibility:** - 10GBASE-T operation with **CAT 6a cable up to 100 meters** or **CAT 6 cable up to 55 meters**. - NBASE-T (2.5G/5G) operation with **CAT 5e or CAT 6 cables up to 100 meters**. - Backward compatible with **1000BASE-T (Gigabit Ethernet)** networks. - **Advanced Networking Features:** - **15.5 KB jumbo frame** support for efficient large-packet data transfer. - **NIC teaming** for redundancy and load balancing. - **IEEE 1588 Precision Time Protocol (PTP)** support for synchronized data acquisition and time-sensitive applications. - **Per-Port PoE+ Power Control:** Software API allows individual port power on/off management for flexible device control. - **High Reliability and Signal Integrity:** Optimized power design ensures stable 10G PHY operation and consistent bandwidth performance. - **Machine Vision Ready:** Engineered for industrial imaging systems, enabling high-speed data transfer and power delivery to GigE Vision cameras over a single cable.

Manufacturer: Neousys Technology

Category: Frame Grabber

- **Quad‑Channel Real‑Time Capture:** Simultaneous acquisition of four analog video inputs using four BT878A encoders. Supports both color (PAL, NTSC, SECAM) and monochrome (CCIR, EIA/RS‑170) formats. - **Scalable Multi‑Input Architecture:** Expandable up to 16 video inputs using three RTV‑E4 channel extension modules via onboard 10‑pin headers. - **Programmable Image Processing:** Adjustable hue, brightness, contrast, and saturation (0–200 % range). Supports automatic chrominance gain control and optional image scaling down to 1:16. - **Flexible Resolution Control:** Programmable resolutions including square‑pixel (640 × 480 NTSC, 768 × 576 PAL) and broadcast resolutions. Supports arbitrary cropping and region‑of‑interest selection. - **High‑Speed Acquisition:** - NTSC: up to 240 fields (120 fps) across four cameras - PAL: up to 200 fields (100 fps) across four cameras - Continuous real‑time capture across all channels - **Robust I/O and Triggering:** 4 × TTL inputs, 4 × TTL outputs, and 4 × software‑trigger lines. Programmable trigger pulse width from 60 µs to 16 ms. GPIO lines are ESD‑protected and overload‑resistant. - **Hardware Watchdog Timer:** Monitors system activity and automatically resets the host PC after a programmable inactivity timeout, ensuring fault‑tolerant operation. - **User EEPROM:** 1 Kbit onboard EEPROM for user‑defined data storage. - **Software Support:** WDM drivers for Windows 98/NT/2000/XP. Compatible with Visual C++, Visual Basic, Borland C++ Builder, and Delphi. Includes ViewCreator utility for configuration, testing, and image capture. - **Applications:** - PC‑based digital video recorders (DVR) - Security and surveillance systems - Factory and process monitoring - Machine vision inspection - Scientific and medical imaging instrumentation

Manufacturer: Adlink Technology Inc.

Category: Frame Grabber

- **Multi‑Channel Real‑Time Video Capture:** Supports up to four composite analog video inputs through a DB‑9 connector, digitized via dual Connexant 878A encoders. Compatible with NTSC, PAL, SECAM, CCIR, and EIA video standards. - **Simultaneous Dual Encoder Operation:** Two 878A chips allow concurrent acquisition of two video streams, ensuring synchronized capture for multi‑camera systems. - **Programmable Resolution and Scaling:** Supports full broadcast and square‑pixel resolutions (NTSC 640×480, PAL 768×576). Programmable region‑of‑interest (ROI) cropping and down‑scaling up to 1:16 ratio. - **Color and Monochrome Support:** Handles composite color (NTSC‑M/J, PAL‑B/D/G/H/I/M/N, SECAM) and monochrome (CCIR, EIA/RS‑170) signals. - **Adjustable Image Parameters:** Software‑controlled hue, brightness, contrast, and saturation (0–200 % range). Automatic chrominance gain control for stable color reproduction. - **General Purpose I/O (GPIO):** One TTL‑compatible input and one output line, configurable for external triggers or alarm signaling. - **User EEPROM:** 1 Kbit non‑volatile memory for user‑defined data storage. - **Software Support:** WDM driver package for Windows 98/NT/2000/XP. Compatible with Visual C++, Visual Basic, Borland C++ Builder, and Delphi. Includes ViewCreator utility for configuration, testing, and image capture. - **Watchdog Timer (via software library):** Programmable watchdog for system reliability and automatic reset on timeout. - **Compact Embedded Form Factor:** 32‑bit, 33 MHz PMC module for integration into cPCI CPU boards or embedded controllers.

Manufacturer: Adlink Technology Inc.

Category: Frame Grabber

- **Full HD Uncompressed Video:** Supports 1920 × 1080p at 60 frames per second (fps) with 10-bit high-resolution analog-to-digital conversion (ADC). - **Multi-Format Video Input:** Compatible with HDMI, DVI, RGB, YPbPr, S-Video, and NTSC/PAL composite signals. - **Audio Capture:** Supports HDMI and S/PDIF (optical Toslink and coaxial RCA) digital audio inputs. - **High Bandwidth:** 170 MHz video bandwidth for uncompressed RGB 32/30/24-bit and YCrCb 4:4:4/4:2:2 formats. - **HDCP Support:** Compliant with High-Bandwidth Digital Content Protection for secure digital content capture. - **Configurable EDID:** Allows user-defined Extended Display Identification Data for flexible display emulation. - **Integrated Frame Buffer:** 512 MB DDR2 onboard memory for stable, high-speed data streaming. - **DirectShow SDK:** Includes comprehensive software development kit with DirectShow and API support for Windows platforms. - **PXI Express Interface:** Fully compliant with PXI Express Rev. 1.0, ensuring high throughput and synchronization in modular test systems. - **Direct SDK Support:** Provides low-level API for C/C++, C#, and VB.NET for custom application development. - **Environmental Compliance:** RoHS and WEEE compliant, reflecting ADLINK’s environmental responsibility.

Manufacturer: Adlink Technology Inc.

Category: Frame Grabber

- **Channel Expansion:** Adds four additional composite video input channels to the RTV‑24 base board. - **High‑Performance Video Acquisition:** Supports real‑time capture of multiple analog video streams (PAL, NTSC, CCIR, EIA). - **Scalable Architecture:** Up to 16 total channels can be configured using multiple RTV‑E4 boards connected to the RTV‑24 via onboard 10‑pin headers. - **Flexible Video Formats:** Compatible with NTSC‑M, NTSC‑Japan, PAL‑B/D/G/H/I/M/N, and SECAM color standards, as well as CCIR and EIA monochrome formats. - **Programmable Image Processing:** Adjustable hue, brightness, contrast, and saturation; optional image scaling (down to 1:16) and cropping to region of interest. - **TTL‑Compatible I/O Lines:** 4 digital inputs, 4 outputs, and 4 software trigger lines with overload and ESD protection. - **Watchdog Timer:** Hardware watchdog for system reliability; automatically resets the host PC after a programmable inactivity timeout. - **User EEPROM:** 1 Kbit non‑volatile memory for user‑defined data storage. - **Software Support:** WDM drivers for Windows NT/98/2000/XP; compatible with VC++, VB, Borland C++ Builder, and Delphi. - **Utility Software:** Bundled ViewCreator utility for configuration, testing, and image capture verification. - **Compact PCI/PCI/PMC Compatibility:** Designed for integration with ADLINK’s RTV‑24 PCI frame grabber and compatible Angelo series boards.

Manufacturer: Adlink Technology Inc.

Category: Frame Grabber

- **Four Isolated GPIO Channels:** Provides four independent, optically isolated digital I/O channels for enhanced signal integrity and protection against electrical noise and surges. - **Seamless Integration with RTV‑24:** Designed as a plug‑in extension board for the ADLINK RTV‑24 frame grabber, extending its I/O functionality without additional interface hardware. - **TTL‑Compatible Logic Levels:** Supports standard 5 V TTL logic for compatibility with a wide range of industrial sensors, actuators, and control devices. - **Bidirectional Configuration:** Each GPIO line can be configured as input or output, allowing flexible control and monitoring setups. - **Electrostatic and Overload Protection:** Built‑in protection circuitry ensures reliable operation in electrically noisy environments. - **Software‑Configurable I/O:** Fully programmable through ADLINK’s ViewCreator utility and the AngeloRTV API library. - **Real‑Time Triggering Support:** Enables hardware and software triggers for synchronized image capture and external event control. - **Compact Form Factor:** Small, lightweight board designed for internal installation within PC‑based vision systems. - **Industrial Reliability:** Designed for continuous operation in surveillance, machine vision, and automation environments.

Manufacturer: Adlink Technology Inc.

Category: Frame Grabber