• Converts 10/100/1000Base‑T(X) copper Ethernet to 1000Base‑FX fiber • 1× RJ‑45 auto-negotiating 10/100/1000TX port • 1× SFP slot for 1000Base‑FX optical modules (LC-type) • Hot-swappable card design for easy replacement in operational systems • Industrial operating temperature range: –10°C to 60°C • Compact card form factor optimized for RMC‑1000 chassis integration • Low power consumption (~4.5 W) • Lightweight and robust construction for industrial environments • Supports multimode or single‑mode fiber via SFP (dependent on installed module) • Auto MDI/MDI‑X on copper port • High‑reliability industrial design with extended environmental tolerance

Manufacturer: Oring

Category: Rack Media Converter

• Supports 18 individual card‑type media converters • Full compatibility with RMC‑111PB, RMC‑111FB, and RMC‑121FB converter series • Each slot supports 10/100Base‑T(X) auto‑negotiation and auto‑MDI/MDI‑X • Supports single‑mode and multi‑mode 100Base‑FX optical fiber interfaces • Dual redundant power supply design, with optional dual 100–240 VAC inputs • Hot‑swappable converter modules and hot‑swappable power supplies • 19‑inch rack‑mount industrial chassis, designed for high‑density converter deployment • High reliability design suitable for harsh industrial conditions • Robust mechanical construction supporting vibration, shock, and free‑fall resilience • Wide environmental operating range: –10°C to 60°C • Wide storage temperature: –40°C to 85°C • Supports non‑condensing humidity from 5% to 95% • Internal power design prevents service interruption during power module removal • Straightforward installation and maintenance through modular architecture

Manufacturer: Oring

Category: Rack Media Converter

- **Media Conversion:** Converts 10/100Base-T(X) Ethernet (RJ-45) to 100Base-FX fiber (multi-mode, SC connector). - **Card-Type Design:** Compact module form factor for installation into the RMC-1000 chassis. - **Hot-Swappable:** Enables replacement or addition of modules without powering down the chassis. - **Industrial Temperature Range:** Operates reliably from **-10°C to +60°C (14°F to 140°F)**. - **Low Power Consumption:** Approximately **2.2 W** typical power usage. - **Compact and Lightweight:** Dimensions **21.8 × 73.1 × 126 mm**, weight approximately **0.140 kg**. - **High Reliability:** Designed for continuous operation in industrial environments. - **Auto-Negotiation and Auto-MDI/MDI-X:** Automatically detects link speed and cable type for copper Ethernet ports. - **Multi-Mode Fiber Support:** Optimized for short to medium distance fiber links using SC connectors. - **Integration with RMC-1000 Chassis:** Supports up to 18 converter cards in a single 19-inch rack-mount chassis. - **Dual Power Supply Redundancy (via RMC-1000):** Ensures uninterrupted operation in case of power failure. - **Compliance with Industrial Standards:** Meets EMI/EMS and environmental standards for industrial networking equipment.

Manufacturer: Oring

Category: Rack Media Converter

- **Ethernet-to-Fiber Conversion:** Converts one 10/100Base-T(X) RJ-45 copper port to one 100Base-FX single-mode SC fiber port. - **Card-Type Design:** Compact form factor for installation into the RMC-1000 chassis system. - **Hot-Swappable Module:** Enables replacement or addition of converter cards without powering down the chassis. - **Industrial Temperature Range:** Operates reliably from **-10°C to +60°C (14°F to 140°F)**. - **Low Power Consumption:** Typical power usage of approximately **2.2 W**. - **Compact and Lightweight:** Dimensions **21.8 × 73.1 × 126 mm**, weight approximately **0.140 kg**. - **High Reliability:** Designed for continuous operation in industrial environments with redundant power support when used in the RMC-1000 chassis. - **Auto-Negotiation and Auto-MDI/MDI-X:** Automatically detects link speed and cable type for plug-and-play operation. - **Single-Mode Fiber Support:** SC connector type for long-distance fiber transmission. - **Compliance with Industrial Standards:** Meets FCC, CISPR, and EN61000 series EMC/EMS standards. - **Rack-Mount Integration:** Compatible with the **RMC-1000 19-inch rack-mount chassis**, supporting up to 18 converter cards. - **Dual Power Supply Redundancy (via chassis):** Ensures uninterrupted operation in case of power source failure.

Manufacturer: Oring

Category: Rack Media Converter

- **Media Conversion:** Converts 1 × 10/100Base-T(X) (RJ-45) Ethernet port to 1 × 100Base-FX (SFP slot / LC connector). - **Card-Type Design:** Compact modular form factor for installation in the RMC-1000 chassis. - **Hot-Swappable:** Enables replacement or addition of modules without system downtime. - **Auto-Negotiation:** Supports 10/100 Mbps auto-negotiation and auto-MDI/MDI-X for copper ports. - **Flexible Fiber Options:** Compatible with both single-mode and multi-mode fiber via SFP transceivers. - **Industrial-Grade Reliability:** Designed for continuous operation in harsh environments with extended temperature tolerance. - **Low Power Consumption:** Typical power usage of approximately 4.5 W per module. - **Compact and Lightweight:** Dimensions of 21.8 × 73.1 × 126 mm and weight of approximately 0.137 kg. - **Wide Operating Temperature:** -10°C to +60°C operating range for industrial deployment. - **Integration Ready:** Fully compatible with ORing’s RMC-1000 19-inch rack-mount chassis system. - **Redundant Power Support:** When installed in the RMC-1000 chassis, benefits from dual power supply redundancy. - **Ease of Maintenance:** Modular design simplifies installation, replacement, and scalability.

Manufacturer: Oring

Category: Rack Media Converter

- **Dual Copper to Fiber Conversion:** Converts two 10/100Base-TX (RJ-45) Ethernet ports to one 100Base-FX multimode SC fiber port. - **Hot-Swappable Card Design:** Enables easy insertion and removal from the RMC-1000 chassis without system downtime. - **Industrial Temperature Range:** Operates reliably from **-10°C to +60°C**, suitable for harsh industrial environments. - **Compact Card Form Factor:** Dimensions of **21.8 × 73.1 × 126 mm**, optimized for high-density rack installations. - **Low Power Consumption:** Typical power usage of approximately **2.2 W**, ensuring energy-efficient operation. - **Lightweight Construction:** Weighs approximately **0.145 kg**, facilitating easy handling and installation. - **High Reliability:** Designed for continuous operation with redundant power supply support when used in the RMC-1000 chassis. - **Auto-Negotiation and Auto-MDI/MDI-X:** Automatically detects link speed and cable type for plug-and-play connectivity. - **Multi-Mode Fiber Support:** Compatible with multimode optical fiber for medium-distance transmission (typically up to 2 km). - **SC Fiber Connector Interface:** Standard SC connector ensures secure and stable fiber connections. - **Rack-Mount Integration:** Fully compatible with the **RMC-1000** 19-inch rack chassis, supporting up to 18 converter cards. - **Dual Power Supply Redundancy (via chassis):** Ensures uninterrupted operation in case of power source failure. - **Compliance with Industrial Standards:** Meets FCC, CISPR, and EN61000 series EMC/EMS standards for electromagnetic compatibility.

Manufacturer: Oring

Category: Rack Media Converter

- **Dual 10/100Base-TX to Single 100Base-FX Conversion:** Converts two RJ-45 Ethernet ports (10/100 Mbps) to one fiber-optic port (100 Mbps FX, single-mode, SC connector). - **Hot-Swappable Card Design:** Enables easy insertion and removal from the RMC-1000 chassis without system downtime, supporting continuous operation and simplified maintenance. - **Industrial Temperature Range:** Operates reliably in environments from **-10°C to +60°C (14°F to 140°F)**, suitable for industrial and field applications. - **Compact and Lightweight:** Card dimensions of **21.8 × 73.1 × 126 mm** and weight of approximately **0.145 kg**, allowing high-density installation within rack systems. - **Low Power Consumption:** Typical power usage of **~2.2 W**, ensuring energy-efficient operation. - **High Reliability and Redundancy:** When used with the RMC-1000 chassis, benefits from dual power supply redundancy, minimizing downtime due to power failure. - **Flexible Fiber Options:** Supports **single-mode fiber** with **SC connector**, enabling long-distance data transmission over optical fiber. - **Auto-Negotiation and Auto-MDI/MDI-X:** Automatically detects link speed and cable type, simplifying network configuration and reducing installation complexity. - **Industrial-Grade Design:** Built for durability and stability under vibration, shock, and temperature variations typical of industrial environments.

Manufacturer: Oring

Category: Rack Media Converter

The FTC‑6011 provides long‑distance serial‑to‑fiber conversion with advanced protection features and automatic interface optimization. Key capabilities include: • Multi‑protocol serial support: RS‑232, RS‑422, and RS‑485 (2‑wire and 4‑wire) • Auto‑Detect & Switch for RS‑422/485 interfaces • SUNIX AHDC/CS™ Auto Hardware Direction Control / Carrier Sense for RS‑485 signaling • Auto baud rate detection supporting dynamic environments and device changes • Fiber communication range up to 80 km depending on fiber type • Surge protection: 600 W power surge protection • 15 kV embedded ESD protection • 2.5 kV optical isolation • Redundant dual‑input power system with reverse polarity protection • Aluminum IP30 industrial enclosure designed for vibration, shock, and extreme temperature resistance • DIN rail and wall‑mount installation options • Wide operating temperature range (-20 to 75°C, extended -40 to 80°C per series specifications)

Manufacturer: Sunix

Category: Industrial Media Converter

• Converts RS‑485 serial communication to fiber optic transmission • Compatible with standard industrial multi‑mode (2 km) and single‑mode (30 km or up to 80 km extended) fiber • Auto baud rate detection supporting speeds up to 460.8 kbps for RS‑485 communication • Automatic RTS Direction Control via SUNIX AHDC/CS technology for 2‑wire RS‑485 • Embedded 15 kV ESD protection and 600 W surge protection for improved durability • 2.5 kV optical isolation safeguarding connected systems from ground loops and electrical noise • Redundant power input system supporting 12–48 V DC with reverse polarity protection • Rugged, shock‑proof alloy/ABS casing with IP30 protection level • Designed for extreme environments: operational temperature −20°C to 75°C • DIN rail and wall‑mount compatibility for flexible installation • Low power consumption below 2.4 W (approx. 200 mA @ 12 V)

Manufacturer: Sunix

Category: Industrial Media Converter

• Converts 10/100/1000Base‑T(X) copper Ethernet to 1000Base‑SX/LX fiber • Supports multimode (50/125 μm, up to 2 km) and single‑mode fiber (9/125 μm, up to 30 km) • Rugged industrial design, IP30 aluminum enclosure • Supports redundant dual power inputs (12–48 VDC) with reverse power protection • Integrated alarm relay output for fault signaling • Surge protection, optical isolation (system‑level), high immunity to ESD and voltage disturbances • DIN‑rail and wall‑mount installation options • Supports extended operating temperatures from −40 °C to 80 °C • Implements SUNIX AHDC/CS™ technologies within associated converter families (direction control features for serial products; general platform robustness and auto‑sense logic) • High EMI/ESD resilience, meeting industrial EMC standards • Compact industrial form factor (30 × 68.5 × 105 mm)

Manufacturer: Sunix

Category: Industrial Media Converter

The FTL‑1218H‑MMC integrates multiple industrial‑grade features, including: • 10/100Base‑TX to 100Base‑FX optical conversion using SC multi‑mode fiber. • Multi‑mode fiber support for 50/125 µm cable with standard transmission distances up to 2 km. • Rugged metal IP30‑rated enclosure suitable for harsh industrial environments. • Dual power inputs supporting 12–48 VDC via terminal block and a 12 VDC jack, ensuring redundancy and operational reliability. • Built‑in reverse power protection to prevent damage from incorrect wiring. • Configurable alarm relay output for event signaling and remote monitoring. • DIN‑rail and wall‑mounting support for flexible industrial installation. • Extended industrial protections including ESD protection, surge resistance, optical isolation characteristics, and mechanical shock and vibration resistance according to IEC standards. • Operating temperature range of 0°C to +60°C, supporting standard industrial temperature environments. • Compact design optimized for dense cabinet installations.

Manufacturer: Sunix

Category: Industrial Media Converter

• Converts 10/100Base‑TX Ethernet to 100Base‑FX fiber. • Multimode fiber support using 50/125 µm cable. • Standard SC fiber port for 100Base‑FX links. • Designed for industrial applications requiring high immunity and long‑distance communication. • Extended operating temperature range from ‑40°C to +85°C. • DIN rail mountable metal IP30 enclosure for harsh environments. • Dual redundant power inputs (12–48 VDC terminal block and 12 VDC DC jack). • Configurable relay alarm output for fault monitoring. • Integrated surge protection, optical isolation protection, and reverse power protection. • Link Fault Signaling enables systems to react to line loss or interruptions. • Auto negotiation and compatibility with 10/100 Mbps copper Ethernet. • High immunity against EMI/RFI disruptions common in industrial areas. • Compact industrial form factor suited for panels, cabinets, and field deployments.

Manufacturer: Sunix

Category: Industrial Media Converter

• Converts 10/100Base‑TX Ethernet to 100Base‑FX fiber • Single‑mode fiber 9/125 μm with SC connector • Transmission distance up to 40 km • Industrial‑grade aluminum enclosure with IP30 protection • Dual redundant power input: 12–48 VDC on terminal block and 12 VDC DC jack • Low power consumption: 1 A @ 12 VDC • Operating temperature: 0°C to +60°C (standard industrial rating) • Integrated alarm relay output (configurable) • DIN‑rail and wall‑mount options • RJ45 Ethernet port and fiber SC port • High EMI/ESD protection levels • Reverse power protection • Surge protection, optical isolation, and enhanced electrical immunity • Supports Link Fault Signaling for network event detection • Compact form factor: 30 × 68.5 × 105 mm • Rugged metal chassis designed for continuous industrial operation • Sunix AHDC/CS Technology (Auto Hardware Direction Control/Carrier Sense) applicable across the product line • Designed for long‑distance, high‑integrity fiber communication in harsh environments

Manufacturer: Sunix

Category: Industrial Media Converter

• Converts 10/100Base‑TX (copper) to 100Base‑FX (fiber) • Single‑mode fiber operation using 9/125 µm fiber with SC connector • Fiber distance support up to 40 km (product description) or typical SUNIX standard single‑mode specification up to 30 km depending on installation • Industrial extended‑temperature range: -40°C to +85°C • Designed for harsh industrial environments with shock‑proof, corrosion‑resistant IP30 aluminum housing • Surge protection, optical isolation protection, reverse power protection • Dual redundant power input: 12–48 VDC via terminal block and 12 VDC jack • Current consumption 1A @ 12 VDC • Automatically detects serial baud rates (relevant to SUNIX media converter technology family) • Configurable alarm relay output for fault notification • Link Fault Signaling support enabling network applications to react to fiber or copper link failures • DIN rail and wall mount options • High immunity against electromagnetic interference and ground potential differences • Auto-detection and switching technologies derived from SUNIX RS-422/485 mechanisms integrated into product family design • Rigid mechanical construction for high vibration, impact, and extreme temperature operational reliability • Packet length supported: 64 to 1522 bytes • Benefits of fiber optics: longer distance extension, higher bandwidth, immunity, enhanced data integrity • EMI/ESD protection integrated into communication circuitry • Designed for continuous 24/7 industrial operation

Manufacturer: Sunix

Category: Industrial Media Converter

Industrial grade RS-232 to Fiber SC/ST media converter, auto baud rate detection, up to 460,8kbps, 15kV embedded ESD surge protection, 12..48V DC

Manufacturer: Sunix

Category: Industrial Media Converter

Optical bypass switch with 4*FX duplex MM LC connector, networks ports and monitor ports, dual 12..48VDC in, ~2,7W, 26,1*94,9*144,3mm, ~0,405kg, Oring

Manufacturer: Oring

Category: Industrial Media Converter

- **Optical Bypass Functionality:** Supports automatic optical bypass switching for 2-port duplex or 4-port simplex fiber connections, ensuring uninterrupted network operation during power loss or device failure. - **High-Speed Compatibility:** Compatible with 100 Mbps, 1 Gbps, and 10 Gbps fiber Ethernet networks, making it suitable for a wide range of industrial and enterprise applications. - **Single-Mode Fiber Support:** Equipped with 4×LC duplex single-mode connectors (9/125 µm fiber), supporting wavelengths from 1260 nm to 1570 nm. - **Fast Switching Time:** Bypass switching time is less than 10 milliseconds, minimizing network downtime during transitions between normal and bypass modes. - **Low Insertion Loss:** Typical insertion loss of 1.2 dB (maximum 1.6 dB), ensuring minimal signal degradation and maintaining high data throughput. - **Dual Power Inputs:** Redundant 12–48 VDC power inputs via both DC jack and 4-pin terminal block, providing power reliability and flexibility in industrial installations. - **Relay Output for Power Failure Warning:** Integrated relay output (1A @ 24VDC) for external alarm or monitoring systems to indicate power failure conditions. - **Rugged Industrial Design:** IP-30-rated metal housing for protection against dust and mechanical impact, suitable for DIN-rail or wall-mounted installation. - **Wide Operating Temperature Range:** Designed for operation in extreme environments, with a temperature range from -20°C to +70°C. - **Comprehensive LED Indicators:** Includes Power (P1, P2), Normal Mode, and Fault LEDs for clear visual status monitoring. - **Compact and Lightweight:** Slim form factor (26.1 × 94.9 × 144.3 mm) and lightweight (405 g) design for easy integration into control cabinets or network racks.

Manufacturer: Oring

Category: Industrial Media Converter

- **Gigabit Ethernet Conversion:** Converts 10/100/1000Base-T(X) copper Ethernet to 1000Base-X fiber Ethernet. - **Multi-Mode Fiber Support:** Equipped with a 1000Base-SX multi-mode fiber port (850 nm wavelength, SC connector) supporting transmission distances up to 550 meters. - **Auto-Negotiation and Auto-MDI/MDI-X:** Automatically detects link speed and cable type for simplified installation. - **Dual Power Inputs:** Redundant 12–48 VDC power inputs via a 6-pin terminal block ensure continuous operation even if one power source fails. - **Relay Output Alarm:** Configurable relay output (1A at 24 VDC) for power failure or fault condition notification. - **Rugged Industrial Design:** IP-30 rated metal enclosure for protection against dust and mechanical impact. - **Wide Operating Temperature Range:** Designed for extreme environments, operating from -40°C to +70°C. - **DIN-Rail and Wall Mounting:** Flexible installation options for industrial control cabinets or panels. - **Low Power Consumption:** Typical power usage of only 3.5 W for energy-efficient operation. - **Comprehensive LED Indicators:** Provides clear visual status for power, link/activity, and fault conditions. - **High Reliability:** Designed for continuous operation in mission-critical industrial networks. - **Standards Compliance:** Fully compliant with IEEE 802.3 Ethernet standards and international EMC and safety regulations. - **5-Year Warranty:** Long-term reliability backed by ORing’s extended warranty coverage.

Manufacturer: Oring

Category: Industrial Media Converter

Gigabit 10/100/1000Base TX Ethernet to 1000Base FX Fiber SC media converter, Single Mode 9/125µm up to 40km, serial port RJ45, Alarm Relay out configurable, 12..48VDC in, dual power input, DIN rail mountable, extended operating temperature -40°..+70°C, 33*144,5*95mm, ~400gr, ~3,5W, Oring

Manufacturer: Oring

Category: Industrial Media Converter

- Provides media conversion between 10/100/1000Base‑T(X) copper and 1000Base‑X fiber (via SFP module). - Auto‑negotiation and auto‑MDI/MDI‑X for the copper Ethernet port. - Supports multi‑mode or single‑mode fiber through compatible SFP transceivers. - Wide input power range: dual redundant 12–48 VDC via 6‑pin terminal block. - Power alarm relay output rated 1 A at 24 VDC, with DIP‑switch‑selectable alarm behavior. - Rugged IP‑30 metal enclosure designed for industrial environments. - Slim‑type model with compact form factor for dense cabinet installations. - Extended operating temperature specification: – Standard series spec: −10 to 60 °C – Extended series spec: −40 to 70 °C (per updated datasheet). - DIN‑rail and wall‑mount installation supported. - Low power consumption (~3.5 W). - Supports jumbo frames up to 10240 bytes (per full specs). - FCC Class A, EN55022 Class A EMI compliance; EN61000‑4‑2/3/4/5/6/8/11 EMC immunity certification. - Reverse polarity protection and overload current protection included.

Manufacturer: Oring

Category: Industrial Media Converter

• One 10/100/1000Base‑T(X) auto‑negotiation RJ‑45 copper port with auto‑MDI/MDI‑X • One 100/1000Base‑X SFP fiber port supporting a wide range of ORing SFP transceivers • Supports multimode fiber (50/125 µm) up to 2 km and single‑mode fiber (9/125 µm) up to 120 km (dependent on SFP module) • Jumbo frame support up to 9K bytes (Gigabit mode only) • LFP (Link Fault Pass‑through) with DIP‑switch enable/disable for enhanced link management • Configurable alarm relay output (1A at 24 VDC capacity) for fault signaling • DIP‑switch configuration for: LFP enable/disable, FX mode selection, relay trigger settings, power input monitoring • Dual redundant 12–48 VDC power inputs with reverse‑polarity and overload protection • Industrial hardened design with wide operating temperature −40°C to +75°C • IP‑30 metal enclosure, DIN‑rail or wall‑mount installation • Low power consumption (~4 W) • Compact slim housing: 40 × 70 × 95 mm • MTBF over 1.1 million hours • 5‑year warranty • Designed for rugged environments, industrial automation, transportation, and outdoor applications

Manufacturer: Oring

Category: Industrial Media Converter

• Converts 100/1000Base‑T(X) RJ45 Ethernet to 100/1000Base‑X SFP fiber • Auto‑negotiation and auto‑MDI/MDIX detection on the copper Ethernet port • Supports both Fast Ethernet (100 Mbps) and Gigabit Ethernet (1000 Mbps) speeds • SFP port speed selectable through dual DIP‑switch configuration (100 Mbps / 1000 Mbps) • Wide operational temperature range from −40°C to +70°C for extreme industrial environments • Wide dual DC input range from 12 to 48 VDC with reverse polarity and overload protection • IP‑30 metal enclosure for enhanced robustness and EMI resistance • DIN‑rail and wall‑mount installation options included • LED indicators for power status, link/activity, and speed • Supports multimode fiber (50/125 µm) distances up to 2 km and single‑mode (9/125 µm) distances up to 120 km (depending on SFP module) • Low power consumption (~3.5–3.6 W typical) • Industrial certifications for EMI, EMS, shock, vibration, and free‑fall compliance • 5‑year manufacturer warranty

Manufacturer: Oring

Category: Industrial Media Converter

The IGPMC‑111GP incorporates numerous high‑availability and industrial‑performance functions: • One 10/100/1000Base‑T(X) copper Ethernet port with auto‑negotiation and auto‑MDI/MDI‑X capability. • One 100/1000Base‑X fiber SFP port compatible with both 100 Mbps and 1 Gbps SFP transceivers. • IEEE 802.3at PoE P.S.E. compliant, supporting up to 30 W output per port for powering remote PD devices. • Jumbo Frame support up to 9K bytes in Gigabit mode. • Full LFP (Link Fault Pass‑Through) functionality to improve fault detection and system responsiveness. • DIP‑switch configurable options for power failure detection, LFP control, fiber speed mode selection, and PoE shutdown behavior. • Relay output alarm for system warnings, supporting 1A at 24 VDC. • Wide dual power input 50–57 VDC for redundancy. • Rugged IP‑30 metal enclosure suitable for industrial environments. • Operating temperature range ‑40°C to 75°C, suitable for extreme climates. • DIN‑rail and wall‑mount mechanical installation options. • High mean time between failures (MTBF) of 1,116,093 hours. • Five‑year manufacturer warranty.

Manufacturer: Oring

Category: Industrial Media Converter

• Converts 2×10/100Base‑T(X) copper Ethernet ports to 1×100Base‑FX multimode fiber port via SC connector • Multimode fiber operation at 1310 nm wavelength with transmission distance up to 2 km • Supports auto-negotiation and auto‑MDI/MDI‑X on 10/100Base‑T(X) ports • Two RJ45 copper ports provided to optimize port usage in industrial networks • Rugged IP‑30 metal housing suitable for harsh environments • Extended operating temperature range: standard models −10°C to +60°C; T‑models −40°C to +70°C • Alarm relay output (configurable) supporting system fault notification • Dual DC power input providing redundancy, 9–30 VDC • Low power consumption (~4.5 W typical) • Designed for DIN‑rail mounting for simplified industrial deployment • 5‑year warranty reflecting long‑term reliability • Industrial‑grade stability meeting the requirements of factory automation, transportation, utilities, and remote communication systems

Manufacturer: Oring

Category: Industrial Media Converter

2*10/100Base TX Ethernet to 100Base FX Fiber SC media converter, Multi Mode 2km 1310nm, SC connector, Alarm Relay out configurable, 9..30VDC in, dual power input, DIN rail mountable, extended operating temperature -40°..+75°C, 88*102*24mm, ~300gr, ~4,5W, Oring

Manufacturer: Oring

Category: Industrial Media Converter