- **Multi-channel RTD Input:** Six independent analog input channels for RTD sensors, each configurable for 2-, 3-, or 4-wire connection. - **High Resolution:** 16-bit analog-to-digital conversion ensures precise temperature measurement. - **Wide Sensor Compatibility:** Supports multiple RTD types including Pt100 (α=0.00385 and α=0.003916), Pt1000, Cu100 (α=0.00421 and α=0.00427), Cu1000, and Ni120. - **Open Loop Detection:** Built-in open-circuit detection for sensor fault identification. - **Individual Channel Configuration:** Each channel can be configured independently for sensor type and wiring mode. - **Noise Rejection:** 60 Hz (and optionally 50 Hz) noise rejection filter for stable readings in industrial environments. - **Communication Interface:** RS-485, 2-wire, supporting baud rates from 1200 to 115200 bps. - **Galvanic Isolation:** Input and output sections are galvanically isolated to prevent ground loops and electrical interference. - **Flexible Power Supply:** Operates from 10 to 30 VDC, suitable for field and control cabinet installations. - **Software and Manual Configuration:** Can be configured manually or via supplied configuration software. - **Parity Options:** Supports non, odd, or even parity for serial communication. - **Temperature Range:** Designed for operation in wide ambient temperature conditions typical of industrial environments. - **Compact DIN-rail Mountable Design:** Suitable for distributed I/O systems and modular automation setups.

Manufacturer: TOPSCCC

Category: Module AD In

- **Eight Analog Input Channels:** Supports 8 differential inputs or a combination of 6 differential and 2 single-ended channels. - **High Resolution:** 16-bit analog-to-digital conversion for precise signal measurement (12-bit in fast mode for EX9017F variants). - **Multiple Input Ranges:** Configurable for voltage ranges of ±150 mV, ±500 mV, ±1 V, ±5 V, and ±10 V, or current range of ±20 mA (using external 125 Ω resistor). - **Galvanic Isolation:** Input and output channels are galvanically isolated to prevent ground loops and ensure signal integrity in noisy environments. - **RS-485 Communication:** Two-wire serial interface supporting multiple baud rates from 1200 to 115200 bps. - **Sampling Rate:** 10 samples per second (10 Hz) standard; 50 Hz available in fast mode variants. - **High Accuracy:** ±0.1% of full-scale range with excellent temperature stability. - **Noise Rejection:** Common Mode Rejection (CMR) of 150 dB and Normal Mode Rejection (NMR) of 100 dB at 50/60 Hz. - **Wide Power Supply Range:** Operates from +10 VDC to +30 VDC. - **Dual Watchdog System:** Hardware and software watchdogs ensure continuous operation and system reliability. - **EEPROM Configuration Storage:** Retains settings such as address, baud rate, and input type even after power loss. - **INIT* Mode:** Simplified configuration recovery mode accessible via rear switch or terminal connection. - **Software Configurable:** Supports manual setup or configuration via command set through RS-485. - **Industrial-Grade Design:** Wide operating temperature range and robust construction for harsh environments.

Manufacturer: TOPSCCC

Category: Module AD In

- **8 Analog Input Channels:** Supports up to eight analog input signals, configurable as 8 differential or 6 differential + 2 single-ended channels. - **12-bit Resolution (Fast Mode):** Provides 12-bit analog-to-digital conversion accuracy, optimized for faster sampling rates compared to the 16-bit standard EX9017 model. - **Multiple Input Ranges:** Accepts voltage inputs of ±150 mV, ±500 mV, ±1 V, ±5 V, and ±10 V, as well as current inputs of ±20 mA (via external 125 Ω shunt resistor). - **High Sampling Rate:** Capable of up to 50 Hz total sampling rate, suitable for dynamic signal monitoring. - **RS-485 Communication Interface:** Two-wire serial interface supporting multiple baud rates from 1200 to 115200 bps, compatible with Modbus RTU and ASCII-based command protocols. - **Galvanic Isolation:** Input and output circuits are electrically isolated to prevent ground loops and protect against electrical interference. - **Wide Power Supply Range:** Operates from +10 VDC to +30 VDC, allowing flexible integration into various control systems. - **High Accuracy and Stability:** ±0.1% accuracy, 0.5 µV/°C zero drift, and 25 ppm/°C span drift ensure precise long-term measurements. - **Noise Rejection:** Excellent Common Mode Rejection Ratio (CMR) of 150 dB and Normal Mode Rejection (NMR) of 100 dB at 50/60 Hz. - **Dual Watchdog System:** Incorporates both module and host watchdogs for enhanced reliability and fault recovery. - **EEPROM Configuration Storage:** Retains configuration parameters such as address, baud rate, and input type even after power loss. - **Software and Manual Configuration:** Can be configured via serial commands or using supplied configuration software. - **INIT* Mode:** Simplifies recovery and reconfiguration by resetting communication parameters to default values.

Manufacturer: TOPSCCC

Category: Module AD In

- **8 Analog Input Channels:** Configurable as 8 differential or 6 differential + 2 single-ended inputs. - **High-Speed Sampling:** Up to **60 Hz sampling rate** (10/50 Hz selectable modes). - **12-bit Resolution (Fast Mode):** Provides precise analog-to-digital conversion for accurate signal measurement. - **Wide Input Range:** Supports multiple voltage and current ranges: - Voltage: ±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V - Current: ±20 mA (via external 125 Ω precision resistor) - **Galvanic Isolation:** Complete isolation between input channels and communication/power circuits to prevent ground loops and interference. - **Overvoltage Protection:** Up to **240 Vrms** between Vin+ and Vin–, ensuring safety against transient surges and wiring faults. - **RS-485 Communication Interface:** 2-wire half-duplex serial interface supporting multiple baud rates up to **115.2 kbps**. - **Wide Power Supply Range:** Operates from **+10 V to +30 V DC**, suitable for industrial power systems. - **High Accuracy and Stability:** - Accuracy: ±0.1% of full scale - Zero Drift: 0.5 µV/°C - Span Drift: 25 ppm/°C - **Noise Rejection:** - Common Mode Rejection (CMR): 150 dB @ 50/60 Hz - Normal Mode Rejection (NMR): 100 dB @ 50/60 Hz - **Dual Watchdog System:** Hardware (module) and software (host) watchdogs ensure continuous operation and system reliability. - **EEPROM Configuration Storage:** Retains settings such as address, baud rate, and input type even after power loss. - **INIT* Mode:** Simplified recovery and reconfiguration mode for forgotten or lost settings. - **Software Configurable:** Supports manual setup or configuration via supplied software commands. - **Compact and Rugged Design:** Suitable for DIN-rail or panel mounting in industrial environments.

Manufacturer: TOPSCCC

Category: Module AD In

- **Eight Analog Input Channels:** Supports 8 fully isolated analog input channels configurable as differential or mixed (6 differential + 2 single-ended). - **High Resolution:** 16-bit analog-to-digital conversion for precise signal measurement. - **Wide Input Range:** Configurable for multiple voltage and current ranges: ±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V, and ±20 mA (with external 125 Ω resistor). - **Electrical Isolation:** 240 Vrms isolation between Vin+ and Vin–, providing protection against surges and ground loops. - **RS-485 Communication:** Two-wire serial interface supporting baud rates from 1200 bps up to 115200 bps. - **Galvanic Isolation:** Complete isolation between communication, power, and analog input sections for enhanced reliability. - **Sampling Rate:** 10 samples per second (10 Hz) with a 15.7 Hz bandwidth. - **High Accuracy:** ±0.1% of full-scale range with excellent temperature stability (zero drift 0.5 µV/°C, span drift 25 ppm/°C). - **Noise Rejection:** Common Mode Rejection (CMR) of 150 dB and Normal Mode Rejection (NMR) of 100 dB at 50/60 Hz. - **Flexible Configuration:** Manual or software-based configuration via RS-485 commands; EEPROM stores all settings. - **Dual Watchdog System:** Hardware (module) and software (host) watchdogs ensure continuous operation and fail-safe behavior. - **Wide Power Supply Range:** Operates from +10 VDC to +30 VDC. - **Industrial-Grade Design:** Suitable for harsh environments with wide operating temperature range and surge protection. - **Calibration Support:** Built-in calibration commands for zero and span adjustment, ensuring long-term measurement accuracy. - **INIT* Mode:** Dedicated configuration mode for resetting or reprogramming module parameters. - **Compact Modular Form Factor:** Designed for DIN-rail or panel mounting in distributed control systems.

Manufacturer: TOPSCCC

Category: Module AD In

- **8 Differential Analog Input Channels:** Each channel supports differential measurement for improved noise immunity and accuracy. - **High Resolution:** 16-bit A/D conversion ensures precise signal acquisition. - **Thermocouple Compatibility:** Supports standard thermocouple types J, K, T, E, R, S, B, and N. - **Multi-Range Analog Input:** Configurable for voltage ranges of ±15mV, ±50mV, ±100mV, ±500mV, ±1V, ±2.5V, or current ±20mA (via external 125Ω resistor). - **Sampling Rate:** 10 samples per second (10 Hz) with a bandwidth of 15.7 Hz. - **High Accuracy:** ±0.1% of full scale with low drift characteristics (Zero Drift: 0.5 μV/°C, Span Drift: 25 ppm/°C). - **Galvanic Isolation:** Input and output circuits are isolated to prevent ground loops and enhance reliability. - **RS-485 Communication Interface:** Two-wire serial communication supporting baud rates from 1200 to 115200 bps. - **Modbus RTU Support (EX9018-M):** Enables easy integration with PLCs, SCADA, and HMI systems. - **Thermocouple Break Line Detection (EX9018BL / EX9018BL-M):** Detects open thermocouple circuits for enhanced safety and diagnostics. - **Wide Power Supply Range:** Operates from +10V to +30V DC. - **Cold Junction Compensation (CJC):** Built-in temperature compensation for accurate thermocouple readings. - **Dual Watchdog System:** Hardware and host watchdogs ensure continuous operation and system reliability. - **EEPROM Configuration Storage:** Retains settings such as address, baud rate, and input type even after power loss. - **INIT* Mode:** Simplified configuration recovery mode accessible via rear switch or terminal connection. - **Compact and Robust Design:** Suitable for industrial environments with wide operating temperature tolerance.

Manufacturer: TOPSCCC

Category: Module AD In

- **Multi-Sensor Input Support:** Compatible with thermocouple types J, K, T, E, R, S, B, and N for wide-ranging temperature measurement applications. - **High-Resolution Conversion:** 16-bit analog-to-digital conversion ensures high precision and stability. - **8 Differential Input Channels:** Each channel is fully differential, minimizing noise and interference. - **Wide Input Range:** Supports voltage inputs from ±15 mV to ±2.5 V and current inputs of ±20 mA (with external 125 Ω resistor). - **Open-Loop (Break-Line) Detection:** Detects thermocouple disconnection or wiring faults, ensuring reliable monitoring. - **Galvanic Isolation:** Input and output circuits are isolated to prevent ground loops and enhance signal integrity. - **RS-485 Communication Interface:** Two-wire serial interface supporting baud rates from 1200 to 115200 bps. - **Flexible Configuration:** Configurable via ASCII commands or supplied software; supports INIT* mode for resetting and reconfiguration. - **Cold Junction Compensation (CJC):** Built-in temperature compensation for accurate thermocouple readings. - **Dual Watchdog System:** Hardware and host watchdogs ensure continuous operation and system reliability. - **Wide Power Supply Range:** Operates from +10 VDC to +30 VDC, suitable for industrial power systems. - **Compact and Modular Design:** DIN-rail mountable, designed for distributed I/O systems. - **High Noise Rejection:** CMR of 150 dB and NMR of 100 dB at 50/60 Hz for superior noise immunity. - **Temperature Stability:** Zero drift of 0.5 μV/°C and span drift of 25 ppm/°C. - **Sampling Rate:** 10 samples per second (10 Hz) with a bandwidth of 15.7 Hz. - **Firmware and Protocol Flexibility:** Supports ASCII command set and Modbus RTU protocol (in BL-M variant).

Manufacturer: TOPSCCC

Category: Module AD In

- **8 Differential Analog Input Channels:** Each channel can be configured independently for thermocouple, voltage, or current input. - **High Resolution:** 16-bit A/D conversion ensures precise measurement and low noise. - **Wide Input Range:** Supports multiple voltage ranges (±15 mV to ±2.5 V), current range (±20 mA with external resistor), and thermocouple types J, K, T, E, R, S, B, and N. - **Individual Channel Configuration:** Each input channel can be set to a different input type or range (EX9019/EX9019-M only). - **Open Loop (Burnout) Detection:** Detects thermocouple disconnection or sensor failure. - **Galvanic Isolation:** Input and output circuits are isolated to prevent ground loops and electrical interference. - **RS-485 Communication:** Two-wire serial interface supporting baud rates from 1200 to 115200 bps. - **Modbus RTU Protocol (EX9019-M):** Compatible with standard Modbus RTU master devices such as PLCs, HMIs, and SCADA systems. - **Cold Junction Compensation (CJC):** Built-in temperature compensation for accurate thermocouple readings. - **Dual Watchdog System:** Hardware and host watchdogs ensure reliable operation and automatic recovery from communication or system faults. - **Wide Power Supply Range:** Operates from +10 VDC to +30 VDC. - **Compact and Rugged Design:** Suitable for DIN-rail or panel mounting in industrial environments. - **Software Configurable:** Supports configuration via ASCII commands or EX-9000 utility software. - **Firmware and Module Identification:** Built-in commands to read firmware version and module name.

Manufacturer: TOPSCCC

Category: Module AD In

- **3 Independent RTD Input Channels:** Supports simultaneous measurement from up to three RTD sensors. - **High Resolution and Accuracy:** 16-bit analog-to-digital conversion with ±0.1% accuracy ensures precise temperature readings. - **Wide RTD Compatibility:** Supports multiple RTD types including Pt100, Pt1000, Ni120, Cu100, Cu1000, and Cu50 with various α coefficients (0.00385, 0.003916, 0.00421, 0.00427, etc.). - **2-, 3-, and 4-Wire Connection Support:** Flexible wiring options for different RTD configurations to minimize lead resistance errors. - **Built-in Open Loop Detection:** Automatically detects broken or disconnected RTD lines. - **Offset Function and 60Hz Noise Rejection:** Software-configurable offset adjustment and noise filtering for stable readings in electrically noisy environments. - **Galvanic Isolation:** 3000 VDC inter-module isolation between input, output, and power circuits for enhanced safety and signal integrity. - **RS-485 Communication Interface:** Supports Modbus-like ASCII command protocol for integration with PLCs, SCADA, and PC-based control systems. - **Configurable via Software or Manual Commands:** Can be configured using the EX-9000 Utility software or ASCII command set. - **Wide Operating Temperature Range:** Reliable operation from -25°C to +75°C. - **Compact, Industrial-Grade Design:** Rugged construction suitable for DIN-rail or panel mounting in harsh environments. - **Low Power Consumption:** Operates from a 10–30 VDC supply with typical consumption of 1.0 W. - **Firmware and Configuration Read/Write Support:** Allows reading of firmware version, module name, and configuration parameters via serial commands.

Manufacturer: TOPSCCC

Category: Module AD In

- **3 Independent Analog Input Channels:** Each channel can be configured individually for different RTD types and wiring modes (2-, 3-, or 4-wire). - **High Resolution and Accuracy:** 16-bit A/D conversion with ±0.1% accuracy ensures precise temperature measurement. - **Wide RTD Compatibility:** Supports Pt100, Pt1000, Ni120, Cu100, Cu1000, and Cu50 sensors with various α coefficients (0.00385, 0.003916, 0.00421, 0.00427). - **Open Loop (Break Line) Detection:** Automatically detects sensor disconnection or wiring faults. - **Galvanic Isolation:** 3000 VDC inter-module isolation protects against electrical interference and ground loops. - **Configurable Sampling Rate:** 15 samples per second (15 Hz bandwidth) for stable and responsive readings. - **60 Hz Noise Rejection:** Built-in filter for power-line noise suppression. - **RS-485 Communication Interface:** Supports Modbus/ASCII protocol for integration with PLCs, SCADA, and data acquisition systems. - **Flexible Power Supply:** Operates from +10 to +30 VDC with low power consumption (~1.0 W). - **Wide Operating Temperature Range:** -25°C to +75°C for industrial environments. - **Offset Adjustment:** Individual channel offset calibration via EX-9000 Utility software. - **Manual or Software Configuration:** Parameters can be set via serial commands or configuration utility. - **Individual Channel Configuration (P version):** Each channel can be assigned a unique RTD type and range, unlike the standard EX9033 model.

Manufacturer: TOPSCCC

Category: Module AD In

- **6 Analog Input Channels:** Each channel supports RTD sensors for temperature measurement. - **High Resolution:** 16-bit analog-to-digital conversion ensures precise temperature readings. - **Sampling Rate:** 12 samples per second (12 Hz) for stable and accurate data acquisition. - **Wide RTD Compatibility:** Supports Pt100, Pt1000, Ni120, Cu100, Cu1000, and Cu50 sensors with various α coefficients (0.00385, 0.003916, 0.00421, 0.00427, etc.). - **2/3/4-Wire RTD Support:** Flexible wiring options for different installation requirements. - **Open Loop (Break Line) Detection:** Automatically detects sensor disconnection or wiring faults. - **Offset Function:** Allows per-channel offset adjustment via the EX-9000 Utility software. - **60 Hz Noise Rejection:** Built-in digital filtering for power line interference suppression. - **3000 VDC Isolation:** Galvanic isolation between channels and communication interface for safety and noise immunity. - **RS-485 Communication Interface:** Supports Modbus-like ASCII command set for integration into distributed control systems. - **Wide Power Supply Range:** Operates from +10 to +30 VDC, suitable for industrial power systems. - **Rugged Design:** Operates reliably in harsh environments with wide temperature tolerance. - **Manual or Software Configuration:** Parameters can be set via commands or configuration utility. - **Compact Form Factor:** Designed for DIN-rail or panel mounting in control cabinets.

Manufacturer: TOPSCCC

Category: Module AD In

The EX9036P Analog In 16 bit module for RTD excels at use for temperature measurement with a resistance temperature detector, The Analog In 16 bit module has 10 Hz sampling rate as well as a built-in open-loop detection, Each channel of the Analog In RS485 module can be configured seperately and it may be operated in a wide temperature range, Features: 6 input channels, support all popular resistive thermometer, individual channel configuration, break-line detection, output as RS485-interface, in- and output galvanically isolated, manual configuration or with supplied software, power supply 10 - 30VDC, Supported thermometers: Pt100 a=0.00385 Pt100 a=0.003916 Pt1000 a=0.00385 Cu100 a=0.00421 Cu100 a=0.00427 Cu1000 a=0.00421 Ni120

Manufacturer: TOPSCCC

Category: Module AD In