- **Multi-channel RTD Input:** Six independent analog input channels for RTD sensors, each configurable for 2-, 3-, or 4-wire connection. - **High Resolution:** 16-bit analog-to-digital conversion ensures precise temperature measurement. - **Wide Sensor Compatibility:** Supports multiple RTD types including Pt100 (α=0.00385 and α=0.003916), Pt1000, Cu100 (α=0.00421 and α=0.00427), Cu1000, and Ni120. - **Open Loop Detection:** Built-in open-circuit detection for sensor fault identification. - **Individual Channel Configuration:** Each channel can be configured independently for sensor type and wiring mode. - **Noise Rejection:** 60 Hz (and optionally 50 Hz) noise rejection filter for stable readings in industrial environments. - **Communication Interface:** RS-485, 2-wire, supporting baud rates from 1200 to 115200 bps. - **Galvanic Isolation:** Input and output sections are galvanically isolated to prevent ground loops and electrical interference. - **Flexible Power Supply:** Operates from 10 to 30 VDC, suitable for field and control cabinet installations. - **Software and Manual Configuration:** Can be configured manually or via supplied configuration software. - **Parity Options:** Supports non, odd, or even parity for serial communication. - **Temperature Range:** Designed for operation in wide ambient temperature conditions typical of industrial environments. - **Compact DIN-rail Mountable Design:** Suitable for distributed I/O systems and modular automation setups.

Manufacturer: TOPSCCC

Category: Module AD In

- **Eight Analog Input Channels:** Supports 8 differential inputs or a combination of 6 differential and 2 single-ended channels. - **High Resolution:** 16-bit analog-to-digital conversion for precise signal measurement (12-bit in fast mode for EX9017F variants). - **Multiple Input Ranges:** Configurable for voltage ranges of ±150 mV, ±500 mV, ±1 V, ±5 V, and ±10 V, or current range of ±20 mA (using external 125 Ω resistor). - **Galvanic Isolation:** Input and output channels are galvanically isolated to prevent ground loops and ensure signal integrity in noisy environments. - **RS-485 Communication:** Two-wire serial interface supporting multiple baud rates from 1200 to 115200 bps. - **Sampling Rate:** 10 samples per second (10 Hz) standard; 50 Hz available in fast mode variants. - **High Accuracy:** ±0.1% of full-scale range with excellent temperature stability. - **Noise Rejection:** Common Mode Rejection (CMR) of 150 dB and Normal Mode Rejection (NMR) of 100 dB at 50/60 Hz. - **Wide Power Supply Range:** Operates from +10 VDC to +30 VDC. - **Dual Watchdog System:** Hardware and software watchdogs ensure continuous operation and system reliability. - **EEPROM Configuration Storage:** Retains settings such as address, baud rate, and input type even after power loss. - **INIT* Mode:** Simplified configuration recovery mode accessible via rear switch or terminal connection. - **Software Configurable:** Supports manual setup or configuration via command set through RS-485. - **Industrial-Grade Design:** Wide operating temperature range and robust construction for harsh environments.

Manufacturer: TOPSCCC

Category: Module AD In

- **8 Analog Input Channels:** Supports up to eight analog input signals, configurable as 8 differential or 6 differential + 2 single-ended channels. - **12-bit Resolution (Fast Mode):** Provides 12-bit analog-to-digital conversion accuracy, optimized for faster sampling rates compared to the 16-bit standard EX9017 model. - **Multiple Input Ranges:** Accepts voltage inputs of ±150 mV, ±500 mV, ±1 V, ±5 V, and ±10 V, as well as current inputs of ±20 mA (via external 125 Ω shunt resistor). - **High Sampling Rate:** Capable of up to 50 Hz total sampling rate, suitable for dynamic signal monitoring. - **RS-485 Communication Interface:** Two-wire serial interface supporting multiple baud rates from 1200 to 115200 bps, compatible with Modbus RTU and ASCII-based command protocols. - **Galvanic Isolation:** Input and output circuits are electrically isolated to prevent ground loops and protect against electrical interference. - **Wide Power Supply Range:** Operates from +10 VDC to +30 VDC, allowing flexible integration into various control systems. - **High Accuracy and Stability:** ±0.1% accuracy, 0.5 µV/°C zero drift, and 25 ppm/°C span drift ensure precise long-term measurements. - **Noise Rejection:** Excellent Common Mode Rejection Ratio (CMR) of 150 dB and Normal Mode Rejection (NMR) of 100 dB at 50/60 Hz. - **Dual Watchdog System:** Incorporates both module and host watchdogs for enhanced reliability and fault recovery. - **EEPROM Configuration Storage:** Retains configuration parameters such as address, baud rate, and input type even after power loss. - **Software and Manual Configuration:** Can be configured via serial commands or using supplied configuration software. - **INIT* Mode:** Simplifies recovery and reconfiguration by resetting communication parameters to default values.

Manufacturer: TOPSCCC

Category: Module AD In

- **8 Analog Input Channels:** Configurable as 8 differential or 6 differential + 2 single-ended inputs. - **High-Speed Sampling:** Up to **60 Hz sampling rate** (10/50 Hz selectable modes). - **12-bit Resolution (Fast Mode):** Provides precise analog-to-digital conversion for accurate signal measurement. - **Wide Input Range:** Supports multiple voltage and current ranges: - Voltage: ±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V - Current: ±20 mA (via external 125 Ω precision resistor) - **Galvanic Isolation:** Complete isolation between input channels and communication/power circuits to prevent ground loops and interference. - **Overvoltage Protection:** Up to **240 Vrms** between Vin+ and Vin–, ensuring safety against transient surges and wiring faults. - **RS-485 Communication Interface:** 2-wire half-duplex serial interface supporting multiple baud rates up to **115.2 kbps**. - **Wide Power Supply Range:** Operates from **+10 V to +30 V DC**, suitable for industrial power systems. - **High Accuracy and Stability:** - Accuracy: ±0.1% of full scale - Zero Drift: 0.5 µV/°C - Span Drift: 25 ppm/°C - **Noise Rejection:** - Common Mode Rejection (CMR): 150 dB @ 50/60 Hz - Normal Mode Rejection (NMR): 100 dB @ 50/60 Hz - **Dual Watchdog System:** Hardware (module) and software (host) watchdogs ensure continuous operation and system reliability. - **EEPROM Configuration Storage:** Retains settings such as address, baud rate, and input type even after power loss. - **INIT* Mode:** Simplified recovery and reconfiguration mode for forgotten or lost settings. - **Software Configurable:** Supports manual setup or configuration via supplied software commands. - **Compact and Rugged Design:** Suitable for DIN-rail or panel mounting in industrial environments.

Manufacturer: TOPSCCC

Category: Module AD In

- **Eight Analog Input Channels:** Supports 8 fully isolated analog input channels configurable as differential or mixed (6 differential + 2 single-ended). - **High Resolution:** 16-bit analog-to-digital conversion for precise signal measurement. - **Wide Input Range:** Configurable for multiple voltage and current ranges: ±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V, and ±20 mA (with external 125 Ω resistor). - **Electrical Isolation:** 240 Vrms isolation between Vin+ and Vin–, providing protection against surges and ground loops. - **RS-485 Communication:** Two-wire serial interface supporting baud rates from 1200 bps up to 115200 bps. - **Galvanic Isolation:** Complete isolation between communication, power, and analog input sections for enhanced reliability. - **Sampling Rate:** 10 samples per second (10 Hz) with a 15.7 Hz bandwidth. - **High Accuracy:** ±0.1% of full-scale range with excellent temperature stability (zero drift 0.5 µV/°C, span drift 25 ppm/°C). - **Noise Rejection:** Common Mode Rejection (CMR) of 150 dB and Normal Mode Rejection (NMR) of 100 dB at 50/60 Hz. - **Flexible Configuration:** Manual or software-based configuration via RS-485 commands; EEPROM stores all settings. - **Dual Watchdog System:** Hardware (module) and software (host) watchdogs ensure continuous operation and fail-safe behavior. - **Wide Power Supply Range:** Operates from +10 VDC to +30 VDC. - **Industrial-Grade Design:** Suitable for harsh environments with wide operating temperature range and surge protection. - **Calibration Support:** Built-in calibration commands for zero and span adjustment, ensuring long-term measurement accuracy. - **INIT* Mode:** Dedicated configuration mode for resetting or reprogramming module parameters. - **Compact Modular Form Factor:** Designed for DIN-rail or panel mounting in distributed control systems.

Manufacturer: TOPSCCC

Category: Module AD In

- **8 Differential Analog Input Channels:** Each channel supports differential measurement for improved noise immunity and accuracy. - **High Resolution:** 16-bit A/D conversion ensures precise signal acquisition. - **Thermocouple Compatibility:** Supports standard thermocouple types J, K, T, E, R, S, B, and N. - **Multi-Range Analog Input:** Configurable for voltage ranges of ±15mV, ±50mV, ±100mV, ±500mV, ±1V, ±2.5V, or current ±20mA (via external 125Ω resistor). - **Sampling Rate:** 10 samples per second (10 Hz) with a bandwidth of 15.7 Hz. - **High Accuracy:** ±0.1% of full scale with low drift characteristics (Zero Drift: 0.5 μV/°C, Span Drift: 25 ppm/°C). - **Galvanic Isolation:** Input and output circuits are isolated to prevent ground loops and enhance reliability. - **RS-485 Communication Interface:** Two-wire serial communication supporting baud rates from 1200 to 115200 bps. - **Modbus RTU Support (EX9018-M):** Enables easy integration with PLCs, SCADA, and HMI systems. - **Thermocouple Break Line Detection (EX9018BL / EX9018BL-M):** Detects open thermocouple circuits for enhanced safety and diagnostics. - **Wide Power Supply Range:** Operates from +10V to +30V DC. - **Cold Junction Compensation (CJC):** Built-in temperature compensation for accurate thermocouple readings. - **Dual Watchdog System:** Hardware and host watchdogs ensure continuous operation and system reliability. - **EEPROM Configuration Storage:** Retains settings such as address, baud rate, and input type even after power loss. - **INIT* Mode:** Simplified configuration recovery mode accessible via rear switch or terminal connection. - **Compact and Robust Design:** Suitable for industrial environments with wide operating temperature tolerance.

Manufacturer: TOPSCCC

Category: Module AD In

- **Multi-Sensor Input Support:** Compatible with thermocouple types J, K, T, E, R, S, B, and N for wide-ranging temperature measurement applications. - **High-Resolution Conversion:** 16-bit analog-to-digital conversion ensures high precision and stability. - **8 Differential Input Channels:** Each channel is fully differential, minimizing noise and interference. - **Wide Input Range:** Supports voltage inputs from ±15 mV to ±2.5 V and current inputs of ±20 mA (with external 125 Ω resistor). - **Open-Loop (Break-Line) Detection:** Detects thermocouple disconnection or wiring faults, ensuring reliable monitoring. - **Galvanic Isolation:** Input and output circuits are isolated to prevent ground loops and enhance signal integrity. - **RS-485 Communication Interface:** Two-wire serial interface supporting baud rates from 1200 to 115200 bps. - **Flexible Configuration:** Configurable via ASCII commands or supplied software; supports INIT* mode for resetting and reconfiguration. - **Cold Junction Compensation (CJC):** Built-in temperature compensation for accurate thermocouple readings. - **Dual Watchdog System:** Hardware and host watchdogs ensure continuous operation and system reliability. - **Wide Power Supply Range:** Operates from +10 VDC to +30 VDC, suitable for industrial power systems. - **Compact and Modular Design:** DIN-rail mountable, designed for distributed I/O systems. - **High Noise Rejection:** CMR of 150 dB and NMR of 100 dB at 50/60 Hz for superior noise immunity. - **Temperature Stability:** Zero drift of 0.5 μV/°C and span drift of 25 ppm/°C. - **Sampling Rate:** 10 samples per second (10 Hz) with a bandwidth of 15.7 Hz. - **Firmware and Protocol Flexibility:** Supports ASCII command set and Modbus RTU protocol (in BL-M variant).

Manufacturer: TOPSCCC

Category: Module AD In

- **8 Differential Analog Input Channels:** Each channel can be configured independently for thermocouple, voltage, or current input. - **High Resolution:** 16-bit A/D conversion ensures precise measurement and low noise. - **Wide Input Range:** Supports multiple voltage ranges (±15 mV to ±2.5 V), current range (±20 mA with external resistor), and thermocouple types J, K, T, E, R, S, B, and N. - **Individual Channel Configuration:** Each input channel can be set to a different input type or range (EX9019/EX9019-M only). - **Open Loop (Burnout) Detection:** Detects thermocouple disconnection or sensor failure. - **Galvanic Isolation:** Input and output circuits are isolated to prevent ground loops and electrical interference. - **RS-485 Communication:** Two-wire serial interface supporting baud rates from 1200 to 115200 bps. - **Modbus RTU Protocol (EX9019-M):** Compatible with standard Modbus RTU master devices such as PLCs, HMIs, and SCADA systems. - **Cold Junction Compensation (CJC):** Built-in temperature compensation for accurate thermocouple readings. - **Dual Watchdog System:** Hardware and host watchdogs ensure reliable operation and automatic recovery from communication or system faults. - **Wide Power Supply Range:** Operates from +10 VDC to +30 VDC. - **Compact and Rugged Design:** Suitable for DIN-rail or panel mounting in industrial environments. - **Software Configurable:** Supports configuration via ASCII commands or EX-9000 utility software. - **Firmware and Module Identification:** Built-in commands to read firmware version and module name.

Manufacturer: TOPSCCC

Category: Module AD In

- **3 Independent RTD Input Channels:** Supports simultaneous measurement from up to three RTD sensors. - **High Resolution and Accuracy:** 16-bit analog-to-digital conversion with ±0.1% accuracy ensures precise temperature readings. - **Wide RTD Compatibility:** Supports multiple RTD types including Pt100, Pt1000, Ni120, Cu100, Cu1000, and Cu50 with various α coefficients (0.00385, 0.003916, 0.00421, 0.00427, etc.). - **2-, 3-, and 4-Wire Connection Support:** Flexible wiring options for different RTD configurations to minimize lead resistance errors. - **Built-in Open Loop Detection:** Automatically detects broken or disconnected RTD lines. - **Offset Function and 60Hz Noise Rejection:** Software-configurable offset adjustment and noise filtering for stable readings in electrically noisy environments. - **Galvanic Isolation:** 3000 VDC inter-module isolation between input, output, and power circuits for enhanced safety and signal integrity. - **RS-485 Communication Interface:** Supports Modbus-like ASCII command protocol for integration with PLCs, SCADA, and PC-based control systems. - **Configurable via Software or Manual Commands:** Can be configured using the EX-9000 Utility software or ASCII command set. - **Wide Operating Temperature Range:** Reliable operation from -25°C to +75°C. - **Compact, Industrial-Grade Design:** Rugged construction suitable for DIN-rail or panel mounting in harsh environments. - **Low Power Consumption:** Operates from a 10–30 VDC supply with typical consumption of 1.0 W. - **Firmware and Configuration Read/Write Support:** Allows reading of firmware version, module name, and configuration parameters via serial commands.

Manufacturer: TOPSCCC

Category: Module AD In

- **3 Independent Analog Input Channels:** Each channel can be configured individually for different RTD types and wiring modes (2-, 3-, or 4-wire). - **High Resolution and Accuracy:** 16-bit A/D conversion with ±0.1% accuracy ensures precise temperature measurement. - **Wide RTD Compatibility:** Supports Pt100, Pt1000, Ni120, Cu100, Cu1000, and Cu50 sensors with various α coefficients (0.00385, 0.003916, 0.00421, 0.00427). - **Open Loop (Break Line) Detection:** Automatically detects sensor disconnection or wiring faults. - **Galvanic Isolation:** 3000 VDC inter-module isolation protects against electrical interference and ground loops. - **Configurable Sampling Rate:** 15 samples per second (15 Hz bandwidth) for stable and responsive readings. - **60 Hz Noise Rejection:** Built-in filter for power-line noise suppression. - **RS-485 Communication Interface:** Supports Modbus/ASCII protocol for integration with PLCs, SCADA, and data acquisition systems. - **Flexible Power Supply:** Operates from +10 to +30 VDC with low power consumption (~1.0 W). - **Wide Operating Temperature Range:** -25°C to +75°C for industrial environments. - **Offset Adjustment:** Individual channel offset calibration via EX-9000 Utility software. - **Manual or Software Configuration:** Parameters can be set via serial commands or configuration utility. - **Individual Channel Configuration (P version):** Each channel can be assigned a unique RTD type and range, unlike the standard EX9033 model.

Manufacturer: TOPSCCC

Category: Module AD In

- **6 Analog Input Channels:** Each channel supports RTD sensors for temperature measurement. - **High Resolution:** 16-bit analog-to-digital conversion ensures precise temperature readings. - **Sampling Rate:** 12 samples per second (12 Hz) for stable and accurate data acquisition. - **Wide RTD Compatibility:** Supports Pt100, Pt1000, Ni120, Cu100, Cu1000, and Cu50 sensors with various α coefficients (0.00385, 0.003916, 0.00421, 0.00427, etc.). - **2/3/4-Wire RTD Support:** Flexible wiring options for different installation requirements. - **Open Loop (Break Line) Detection:** Automatically detects sensor disconnection or wiring faults. - **Offset Function:** Allows per-channel offset adjustment via the EX-9000 Utility software. - **60 Hz Noise Rejection:** Built-in digital filtering for power line interference suppression. - **3000 VDC Isolation:** Galvanic isolation between channels and communication interface for safety and noise immunity. - **RS-485 Communication Interface:** Supports Modbus-like ASCII command set for integration into distributed control systems. - **Wide Power Supply Range:** Operates from +10 to +30 VDC, suitable for industrial power systems. - **Rugged Design:** Operates reliably in harsh environments with wide temperature tolerance. - **Manual or Software Configuration:** Parameters can be set via commands or configuration utility. - **Compact Form Factor:** Designed for DIN-rail or panel mounting in control cabinets.

Manufacturer: TOPSCCC

Category: Module AD In

The EX9036P Analog In 16 bit module for RTD excels at use for temperature measurement with a resistance temperature detector, The Analog In 16 bit module has 10 Hz sampling rate as well as a built-in open-loop detection, Each channel of the Analog In RS485 module can be configured seperately and it may be operated in a wide temperature range, Features: 6 input channels, support all popular resistive thermometer, individual channel configuration, break-line detection, output as RS485-interface, in- and output galvanically isolated, manual configuration or with supplied software, power supply 10 - 30VDC, Supported thermometers: Pt100 a=0.00385 Pt100 a=0.003916 Pt1000 a=0.00385 Cu100 a=0.00421 Cu100 a=0.00427 Cu1000 a=0.00421 Ni120

Manufacturer: TOPSCCC

Category: Module AD In

- **Single Analog Output Channel:** Provides one analog output channel configurable for voltage or current output modes. - **12-bit Resolution:** Ensures fine output granularity and high signal accuracy for industrial control applications. - **Output Range Flexibility:** Supports voltage output from 0–10 VDC and current output ranges of 0–20 mA or 4–20 mA. - **RS485 Communication Interface:** Fully compatible with standard RS485 networks, enabling multi-drop communication and long-distance data transmission. - **Wide Operating Temperature Range:** Designed for reliable operation in extended industrial temperature environments. - **Dual Watchdog Timer (WDT):** Provides system reliability by monitoring both host and module operation, ensuring safe fallback states in case of communication failure. - **Selectable Power Source:** Internal power (default) supports up to 500 Ω load; external 24 V power option supports up to 1050 Ω load. - **Programmable Slew Rate Control:** Allows smooth, controlled output transitions to prevent abrupt signal changes that could affect sensitive equipment. - **Safe and Power-On Values:** Configurable safe-state and power-on output values ensure predictable behavior during startup or communication loss. - **Current Readback Function:** Enables monitoring of actual output current for diagnostic and verification purposes. - **Low Power Consumption:** Typical power consumption of 2 W, suitable for distributed I/O systems. - **Calibration and Configuration Commands:** Comprehensive command set for calibration, configuration, and monitoring via RS485 communication.

Manufacturer: TOPSCCC

Category: Module AD Out

- **High Resolution:** 16-bit digital-to-analog conversion for precise output control. - **Single Analog Output Channel:** Supports one configurable output channel for voltage or current signals. - **Output Range Flexibility:** Selectable output ranges of 0–10 VDC, 0–20 mA, or 4–20 mA. - **RS-485 Communication Interface:** Fully compatible with standard RS-485 networks using ASCII command protocol. - **Wide Operating Temperature Range:** Designed for industrial environments with extended temperature tolerance. - **Dual Watchdog Timer (WDT):** Ensures system reliability by monitoring both host and module operation. - **Safe and Power-On Values:** Configurable safe-state and power-on output values for fail-safe operation. - **Internal or External Power Drive:** Internal power supports up to 500 Ω load; external 24 V supply supports up to 1050 Ω load. - **Programmable Slew Rate Control:** Adjustable output transition rate from immediate change to gradual ramping (0.0625 V/s to 512 V/s or equivalent current rates). - **Current Readback Function:** Integrated A/D converter for monitoring actual output current, enabling fault detection. - **Low Power Consumption:** Typical consumption of 2 W. - **Compact Modular Design:** Fits within the EX9000 series modular I/O system for distributed automation.

Manufacturer: TOPSCCC

Category: Module AD Out

- **Dual Isolated Analog Outputs:** Two independent, channel-to-channel isolated outputs for enhanced signal integrity and noise immunity. - **12-bit Resolution:** Provides fine analog signal granularity suitable for precision control applications. - **Flexible Output Ranges:** Supports voltage output (0–10 VDC) and current output (0–20 mA or 4–20 mA). - **RS-485 Communication Interface:** Enables multi-drop networking and long-distance communication in industrial environments. - **Wide Operating Temperature Range:** Designed for extended temperature operation, suitable for harsh industrial conditions. - **Programmable Slew Rate Control:** Allows smooth, controlled transitions between output values to prevent abrupt signal changes. - **Current Readback Function:** Integrated A/D converter enables real-time monitoring of output current for diagnostics and verification. - **Dual Watchdog Timers (WDT):** Ensures system reliability by monitoring both host communication and internal operation. - **Safe and Power-On Values:** Configurable default output states for power-up and communication failure conditions. - **Low Power Consumption:** Typical power usage of 2 W, minimizing system energy requirements. - **Flexible Power Options:** Can operate with internal power (up to 500 Ω load) or external 24 V supply (up to 1050 Ω load). - **Compact Modular Design:** Easily integrates into distributed control systems with minimal wiring complexity.

Manufacturer: TOPSCCC

Category: Module AD Out

- **Four Analog Output Channels:** Each channel can be independently configured for voltage or current output. - **High Resolution:** 14-bit digital-to-analog conversion ensures fine output granularity and precise signal generation. - **Multiple Output Ranges:** Supports ±10 V, ±5 V, 0–10 V, 0–5 V, 0–20 mA, and 4–20 mA ranges. - **RS-485 Communication Interface:** Fully compatible with standard RS-485 networks, allowing multi-drop communication and long-distance data transmission. - **Programmable Slew Rate Control:** Adjustable output transition rate from immediate change to gradual slopes up to 1024 V/s or 2048 mA/s, minimizing transient effects in sensitive systems. - **Dual Watchdog Timers:** Ensures reliable operation and automatic recovery in case of communication or host failure. - **Safe and Power-On Values:** Configurable default output states for power-up and communication failure conditions. - **Flexible Power Options:** Internal power mode supports up to 500 Ω load; external 24 V supply supports up to 1050 Ω load. - **Wide Operating Temperature Range:** Designed for industrial environments with extended temperature tolerance. - **Compact and Modular Design:** Fits within the EX9000 AIO modular system for scalable analog I/O expansion. - **Low Power Consumption:** Typical consumption of 2 W. - **Firmware and Configuration Commands:** Comprehensive command set for calibration, configuration, and diagnostics via serial interface.

Manufacturer: TOPSCCC

Category: Module AD Out

ExpertDAQ Digital Input module communicates via RS485 and are available with Modbus RTU, Within one RS485-network up to 256 modules may be controlled, Without a RS485 Repeater the maximum cable length is 1200m, The RS485 Digital IO module are sturdy, power saving and easy to use, The EX9041 has isolated inputs on 14 channels and was developed for use in a wide temperature range, Features: 14 digital inputs, all inputs isolated, extended temperature range, Digital Level 0:

Manufacturer: TOPSCCC

Category: Module AD DIO

- **14 Isolated Digital Inputs:** Each input channel is electrically isolated, ensuring signal integrity and protection against ground loops and electrical noise. - **High Isolation Voltage:** 3750 Vrms isolation between channels and system, providing strong protection for industrial environments. - **LED Indicators:** Each input channel has a dedicated LED for real-time status visualization. - **RS-485 Communication Interface:** Two-wire RS-485 interface supporting up to 256 modules on a single network. - **Long-Distance Communication:** Supports cable lengths up to 1200 meters without a repeater. - **Flexible Power Supply:** Operates from +10 VDC to +30 VDC, suitable for various industrial power systems. - **Low Power Consumption:** Typical consumption of only 0.9 W, optimizing energy efficiency. - **Wide Operating Temperature Range:** -25°C to +75°C, suitable for demanding industrial environments. - **Dual Watchdog System:** Hardware and software watchdogs ensure continuous operation and system reliability. - **Manual or Software Configuration:** Parameters can be set via commands or configuration software. - **Modbus RTU Support (EX9041D-M variant):** Enables integration with Modbus-based control systems. - **EEPROM Configuration Storage:** Retains settings such as address, baud rate, and data format even after power loss. - **INIT* Mode:** Simplifies recovery and reconfiguration if communication settings are lost. - **Latch and Counter Functions:** Supports digital input latching and counting for pulse or event detection. - **Extended Protocol Support:** ASCII command set and Modbus RTU for flexible integration.

Manufacturer: TOPSCCC

Category: Module AD DIO

- **13 Isolated Digital Output Channels:** Each channel is electrically isolated to prevent interference and ensure safe operation in industrial environments. - **Open Collector Outputs:** NPN transistor outputs capable of sinking up to 100 mA per channel at voltages up to 30 VDC. - **High Isolation Voltage:** 3750 Vrms isolation between channels and communication interface for superior electrical protection. - **RS-485 Communication Interface:** Two-wire half-duplex communication supporting multiple baud rates (1200 to 115200 bps). - **Network Scalability:** Up to 256 modules can be connected in a single RS-485 network; cable length can be extended by 1200 m using a repeater. - **LED Indicators:** Each output channel has a dedicated LED for real-time status monitoring. - **Extended Temperature Range:** Operates reliably from -25°C to +75°C, suitable for industrial and outdoor applications. - **Low Power Consumption:** Typical power usage of only 1.6 W. - **Dual Watchdog System:** Hardware and software watchdogs ensure continuous operation and system safety. - **EEPROM Configuration Storage:** Retains configuration parameters such as address, baud rate, and type even after power loss. - **Manual or Software Configuration:** Can be configured via serial commands or supplied configuration software. - **INIT* Mode:** Simplified reconfiguration mode accessible via rear switch or INIT pin connection. - **Power Supply Flexibility:** Operates from a 10–30 VDC power source. - **Modbus RTU Compatibility (EX9042D-M variant):** The EX9042D-M supports Modbus RTU protocol for integration with standard PLCs and SCADA systems.

Manufacturer: TOPSCCC

Category: Module AD DIO

- **16 Digital Output Channels:** Each channel is a non-isolated open-collector transistor output (NPN type) capable of sinking up to 100 mA at 30 V DC. - **RS-485 Communication:** Two-wire serial interface supporting multiple baud rates (1200 bps to 115.2 kbps). - **Protocol Support:** - EX9043D: ASCII command protocol. - EX9043D-M: ASCII and Modbus RTU selectable via EEPROM. - **High Channel Density:** Compact 16-channel configuration for efficient space utilization in control panels. - **Extended Temperature Range:** Operates reliably from −25 °C to +75 °C, suitable for industrial and outdoor environments. - **Dual Watchdog System:** Hardware (module) and software (host) watchdogs ensure continuous operation and fail-safe output states. - **EEPROM Configuration Storage:** Retains module address, baud rate, and other settings even after power loss. - **LED Indicators:** 16 status LEDs display the state of each digital output channel for quick diagnostics. - **Flexible Power Supply:** Operates from +10 V DC to +30 V DC with low power consumption (1.1 W for EX9043D, 1.2 W for EX9043D-M). - **INIT* Mode:** Simplifies module reconfiguration and recovery of forgotten settings. - **Manual or Software Configuration:** Adjustable via jumpers, rear switches, or configuration commands. - **High Isolation Voltage:** 3750 Vrms isolation between communication and I/O circuitry for noise immunity. - **Compact and Rugged Design:** Built for industrial-grade reliability and long-term deployment.

Manufacturer: TOPSCCC

Category: Module AD DIO

- **16 Digital Output Channels:** Provides 16 non-isolated, single-ended open-collector outputs for flexible control of external devices. - **Open Collector Transistor Outputs:** NPN-type outputs capable of sinking up to 100 mA per channel at voltages up to 30 VDC. - **RS-485 Communication Interface:** Two-wire serial communication supporting multiple baud rates (1200 to 115200 bps). - **Network Scalability:** Up to 256 modules can be connected within a single RS-485 network, with a maximum cable length of 1200 meters without a repeater. - **LED Indicators:** Each output channel has a dedicated LED for visual status indication. - **Wide Power Supply Range:** Operates from +10 VDC to +30 VDC, allowing flexible integration into various power systems. - **Low Power Consumption:** Typical consumption of 1.1 W (EX9043D) or 1.2 W (EX9043D-M). - **Dual Watchdog System:** Hardware and software watchdogs ensure continuous operation and fail-safe output control. - **Extended Temperature Range:** Operates reliably from -25°C to +75°C, suitable for industrial environments. - **EEPROM Configuration Storage:** Retains configuration parameters such as address, baud rate, and data format. - **INIT* Mode:** Provides a recovery mode for resetting configuration parameters when communication settings are lost. - **Manual or Software Configuration:** Can be configured via jumpers, ASCII commands, or ExpertDAQ configuration software. - **Modbus RTU Support (EX9043D-M):** Enables integration with standard Modbus-based control systems. - **LED Display for Each Channel:** Facilitates quick diagnostics and monitoring of output states. - **Compact and Rugged Design:** Built for industrial reliability and long-term operation.

Manufacturer: TOPSCCC

Category: Module AD DIO

- **Digital I/O Configuration:** 4 isolated digital input channels and 8 isolated open-collector digital output channels. - **Isolation Protection:** 3750 Vrms photo-isolation between channels and logic circuitry, ensuring high noise immunity and protection against ground loops. - **Communication Interface:** RS-485, 2-wire half-duplex communication supporting up to 256 modules per network segment. - **Protocol Support:** - EX9044D: Proprietary ASCII command set. - EX9044D-M: Modbus RTU protocol support for standard industrial communication. - **Output Characteristics:** Open-collector NPN transistor outputs capable of sinking up to 375 mA per channel at voltages up to 30 VDC. - **Input Characteristics:** Optically isolated inputs with 3 kΩ impedance, supporting logic levels from 4 V to 30 V for high and below 1 V for low. - **LED Indicators:** 12 status LEDs (one per channel) for real-time monitoring of input and output states. - **Power Supply:** Operates from a wide 10–30 VDC supply range with low power consumption (1.5–1.7 W typical). - **Watchdog Protection:** Dual watchdog system (hardware and software) ensures continuous operation and safe-state fallback in case of communication or system failure. - **Extended Temperature Range:** Designed for industrial environments with operating temperatures from -25°C to +75°C and storage temperatures from -30°C to +75°C. - **Configuration Flexibility:** Supports manual configuration via DIP switches or software commands. EEPROM stores configuration parameters such as address, baud rate, and data format. - **Network Scalability:** Up to 256 modules can be daisy-chained on a single RS-485 bus, with a maximum cable length of 1200 meters without repeaters.

Manufacturer: TOPSCCC

Category: Module AD DIO

- **8 Digital Inputs (Sink Type):** Accepts logic levels from +4V to +30VDC, with a maximum logic low threshold of +1VDC. - **8 Digital Outputs (Source Type):** Open-collector PNP transistor outputs capable of sourcing up to 30–50mA per channel at +10V to +30VDC. - **RS-485 Communication Interface:** Two-wire half-duplex serial interface supporting baud rates from 1200 to 115.2Kbps. - **Protocol Support:** Operates in ASCII command mode or Modbus RTU mode (selectable via INIT* switch). - **LED Indicators:** 16 status LEDs (8 for inputs, 8 for outputs) provide real-time channel state visualization. - **Dual Watchdog System:** Hardware and software watchdogs ensure continuous operation and fail-safe output control. - **EEPROM Configuration Storage:** Retains module address, baud rate, and configuration parameters even after power loss. - **Wide Power Supply Range:** Operates from +10VDC to +30VDC with a typical power consumption of 1.9W. - **Extended Temperature Range:** Designed for operation from -25°C to +75°C, with storage capability down to -30°C. - **Compact and Durable Design:** Suitable for DIN-rail or panel mounting in industrial control cabinets. - **Manual or Software Configuration:** Configurable via ASCII commands or ExpertDAQ configuration utility. - **Safety and Reliability:** Includes short-circuit protection on outputs and diode protection recommendations for inductive loads.

Manufacturer: TOPSCCC

Category: Module AD DIO

- **8 Digital Inputs (Source Type):** Non-isolated, single-ended channels with common ground. - **8 Digital Outputs (Sink Type):** Open-collector NPN transistor outputs, non-isolated, capable of driving external loads. - **RS-485 Communication Interface:** Two-wire half-duplex serial communication supporting multiple baud rates (1200–115200 bps). - **Network Scalability:** Supports up to 256 modules on a single RS-485 network segment (up to 1200 m without repeater). - **LED Indicators:** 16 status LEDs (one per input/output channel) for real-time signal monitoring. - **Wide Power Supply Range:** Operates from +10 VDC to +30 VDC with low power consumption (~1.9 W). - **Extended Temperature Range:** Designed for harsh environments, operating from -25°C to +75°C. - **Dual Watchdog System:** Hardware and software watchdogs ensure continuous operation and fail-safe output control. - **EEPROM Configuration Storage:** Retains module address, baud rate, and configuration settings after power loss. - **INIT* Mode:** Hardware switch for resetting configuration or entering initialization mode for reprogramming. - **Manual or Software Configuration:** Configurable via ASCII commands or ExpertDAQ configuration utility. - **Safe and Power-On Values:** User-definable output states for startup and communication timeout conditions. - **Modbus RTU Support (EX9050HD-M variant):** Enables integration with standard Modbus-compatible PLCs, HMIs, and SCADA systems. - **Compact and Durable Design:** Industrial-grade enclosure suitable for DIN-rail or panel mounting.

Manufacturer: TOPSCCC

Category: Module AD DIO

- **8 Isolated Digital Inputs:** The EX9052 provides eight optically isolated digital input channels. The EX9052D variant offers six differential and two single-ended inputs with a common ground, while the EX9052D-M variant provides eight fully differential isolated inputs. - **High Isolation Voltage:** Each input channel is isolated up to **3750 Vrms**, ensuring reliable operation in electrically noisy industrial environments and protecting both the module and connected equipment. - **Wide Input Voltage Range:** The module accepts digital input signals from **+4 VDC to +30 VDC** for logic high (ON) and recognizes logic low (OFF) below **+1 VDC**. - **RS-485 Communication Interface:** Supports **2-wire RS-485** communication with selectable baud rates from **1200 to 115200 bps**, allowing up to **256 modules** to be connected on a single RS-485 network with a maximum cable length of **1200 meters** (without repeater). - **Low Power Consumption:** Operates efficiently with a typical power consumption of **1.2 W**, minimizing heat generation and energy usage. - **Wide Operating Temperature Range:** Designed for harsh industrial environments, the EX9052 operates reliably between **-25°C and +75°C**, with storage capability from **-30°C to +75°C**. - **Dual Watchdog System:** Incorporates both hardware and software watchdogs to ensure continuous operation and automatic recovery from communication or system faults. - **EEPROM Configuration Storage:** Retains configuration parameters such as address, baud rate, and protocol settings even after power loss. - **LED Status Indicators:** Eight front-panel LEDs provide real-time visual feedback of digital input channel states. - **Flexible Protocol Support:** - EX9052D: ASCII command protocol - EX9052D-M: Modbus RTU protocol (default after power-on) - **INIT* Mode for Configuration Recovery:** A dedicated INIT* switch allows users to reset or reconfigure communication parameters easily.

Manufacturer: TOPSCCC

Category: Module AD DIO