1. Product Overview
Product Name: DB9m Adapter Cable for iPAC-50XX Series
Model Number: CB-F10M9-20
Article Number: CB-F10M9-20
Series Compatibility: iPAC-50XX Series (PAC-50XX family of industrial controllers)
Manufacturer: Artila Electronics Co., Ltd.

The CB-F10M9-20 is a specialized DB9 male adapter cable designed for use with Artila’s iPAC-50XX series of programmable automation controllers. This cable provides a reliable and compact interface between the controller’s internal 10-pin serial header and standard RS-232 communication equipment via a DB9 male connector. With a flat ribbon cable design and a length of 0.20 meters, it ensures a clean, organized, and electrically stable connection for serial communication in embedded and industrial automation environments.

---

2. Key Features
- Purpose-built for iPAC-50XX Series: Designed specifically to connect the internal 10-pin serial port header of Artila’s iPAC-50XX controllers to external RS-232 devices.
- DB9 Male Connector: Provides a standard RS-232 interface compatible with a wide range of serial peripherals such as modems, sensors, PLCs, and industrial instruments.
- 10-pin IDC Header Interface: Connects directly to the controller’s onboard serial port header, ensuring secure and correct pin alignment.
- Flat Ribbon Cable Construction: Offers flexibility, compact routing, and easy installation within control panels or enclosures.
- Short 0.20 m Length: Minimizes signal loss and electromagnetic interference (EMI) while maintaining sufficient reach for internal wiring.
- High Signal Integrity: Designed for stable RS-232 communication with proper shielding and grounding through the DB9 connector.
- Plug-and-Play Compatibility: No additional configuration required; simply connect the cable between the controller and the external device.
- Industrial-Grade Reliability: Manufactured by Artila, known for robust embedded and industrial communication solutions.

---

3. Technical Specifications
- Model: CB-F10M9-20
- Article Number: CB-F10M9-20
- Cable Type: Flat ribbon cable
- Cable Length: 0.20 meters (20 centimeters)
- Connector A: 10-pin IDC (female) header
- Connector B: DB9 male (D-sub 9-pin) connector
- Interface Standard: RS-232 serial communication
- Pin Count: 10-pin to 9-pin mapping (1:1 signal correspondence for RS-232 lines)
- Cable Material: PVC-insulated flat ribbon cable
- Conductor Material: Tinned copper conductors for optimal conductivity and corrosion resistance
- Connector Material:
- DB9 Housing: Molded plastic with nickel-plated metal shell
- IDC Header: Thermoplastic housing with tin-plated contacts
- Color: Standard gray ribbon cable with red edge marking for pin 1 identification
- Operating Temperature Range: -20°C to +70°C (typical for industrial-grade cables)
- Storage Temperature Range: -40°C to +85°C
- Weight: Approximately 20–30 grams (depending on connector housing)
- Electrical Characteristics:
- Signal Type: RS-232 level signals
- Maximum Voltage: ±12 V typical RS-232 signaling
- Impedance: 100–120 Ω nominal
- Insulation Resistance: ≥100 MΩ @ 500 VDC
- Dielectric Withstand Voltage: 500 V AC for 1 minute
- Compliance: RoHS compliant materials

---

4. Functionality
The CB-F10M9-20 functions as a conversion and extension cable between the internal serial communication header of an iPAC-50XX controller and an external RS-232 device. The 10-pin IDC connector attaches directly to the controller’s serial port header, while the DB9 male connector provides a standard RS-232 interface for external equipment.

Typical Use Cases:
- Connecting iPAC-50XX controllers to serial devices such as:
- Industrial sensors and transducers
- Serial modems and communication modules
- PLCs and other automation controllers
- Barcode scanners, RFID readers, or serial printers
- Integrating legacy RS-232 devices into modern embedded systems
- Providing a convenient external serial port for debugging, configuration, or data logging

Compatibility:
- Fully compatible with Artila iPAC-50XX series controllers (e.g., iPAC-5000, iPAC-5100, iPAC-5200, etc.)
- Supports standard RS-232 communication protocols and pinouts
- Can be used with any device that provides a 10-pin serial header with RS-232 signal mapping identical to the iPAC-50XX series

Operation Principle:
The cable transmits RS-232 signals (TXD, RXD, RTS, CTS, DTR, DSR, GND, etc.) from the controller’s internal header to the DB9 male connector, allowing direct connection to external RS-232 devices without additional adapters or converters.

---

5. Components & Accessories
Included Components:
- 1 × CB-F10M9-20 adapter cable (10-pin IDC to DB9 male, 0.20 m length)

Optional Accessories (sold separately):
- DB9 female-to-female extension cables (for longer reach)
- RS-232 to USB converters (for connecting to modern PCs)
- Mounting brackets or cable clips for panel integration
- Additional serial communication cables for multi-port configurations

Connector Details:
- 10-pin IDC Header:
- Pin 1: TXD
- Pin 2: RXD
- Pin 3: RTS
- Pin 4: CTS
- Pin 5: DTR
- Pin 6: DSR
- Pin 7: GND
- Pin 8–10: Reserved or NC (depending on controller model)
- DB9 Male Connector: Standard RS-232 pinout (pins 1–9) corresponding to the above signals

---

6. Installation & Setup
Requirements:
- Compatible iPAC-50XX controller with available 10-pin serial header
- RS-232 device with DB9 female connector or compatible interface

Installation Steps:
1. Power off the iPAC-50XX controller before connecting the cable.
2. Locate the 10-pin serial header on the controller’s mainboard or I/O panel.
3. Align the red stripe on the ribbon cable with pin 1 on the header to ensure correct orientation.
4. Firmly press the IDC connector onto the header until fully seated.
5. Connect the DB9 male end to the external RS-232 device’s DB9 female port.
6. Power on the controller and verify communication using terminal software or the device’s diagnostic tools.

Mounting Options:
- The flat ribbon design allows routing through narrow spaces or internal enclosures.
- The DB9 connector can be panel-mounted using a DB9 bulkhead adapter if required.

Configuration:
- No software configuration is required for the cable itself.
- Serial communication parameters (baud rate, parity, stop bits, etc.) are configured within the iPAC-50XX controller’s software environment.

---

7. Performance & Capabilities
- Signal Type: RS-232 asynchronous serial communication
- Maximum Cable Length: 0.20 m (optimized for short internal connections)
- Data Rate Support: Up to 115.2 kbps (standard RS-232 speed)
- Signal Integrity: Maintained through short cable length and proper grounding
- Noise Immunity: Flat ribbon design minimizes crosstalk for short-distance communication
- Mechanical Durability: IDC and DB9 connectors rated for >200 mating cycles
- Environmental Resistance: Suitable for use in industrial control cabinets and embedded systems with moderate temperature and humidity conditions

Limitations:
- Not suitable for long-distance RS-232 transmission beyond 0.20 m
- Designed exclusively for RS-232 signal levels (not compatible with RS-485 or TTL-level serial interfaces)
- Intended for internal or protected environments; not rated for outdoor or high-vibration applications without additional protection

---

8. Standards & Compliance
- Electrical Interface Standard: EIA/TIA-232 (RS-232)
- Connector Standards:
- DB9: IEC 60807-3 (D-subminiature connectors)
- IDC: IEC 60603-13 (Insulation Displacement Connectors)
- Environmental Compliance:
- RoHS (Restriction of Hazardous Substances) compliant
- REACH compliant materials
- Quality Assurance: Manufactured under ISO 9001-certified production processes
- Safety Compliance: Meets general low-voltage and insulation safety requirements for industrial electronics

---

9. Additional Information
Warranty:
- Standard manufacturer’s warranty (typically 1 year) covering defects in materials and workmanship under normal use conditions.

Support:
- Technical documentation, pinout diagrams, and installation guides available from Artila’s official website.
- Customer support via Artila’s technical service channels for compatibility and troubleshooting assistance.

Maintenance:
- No active maintenance required.
- Periodic inspection recommended to ensure connectors remain clean and securely attached.
- Avoid excessive bending or twisting of the ribbon cable to maintain signal integrity.

Updates & Revisions:
- The CB-F10M9-20 is a stable hardware accessory with no firmware or software updates required.
- Future revisions may include enhanced shielding or alternative connector options depending on controller model updates.

Typical Applications Summary:
- Industrial automation systems requiring RS-232 connectivity
- Embedded control systems using Artila iPAC-50XX controllers
- Serial communication interface for configuration, monitoring, or data acquisition
- Laboratory and test setups where compact, short-distance serial connections are needed

---

Comprehensive Summary:
The Artila CB-F10M9-20 DB9m Adapter Cable is a compact, high-quality interconnect solution engineered for the iPAC-50XX series of industrial controllers. It bridges the gap between the controller’s internal 10-pin serial header and standard RS-232 devices through a DB9 male connector, ensuring reliable communication and easy integration with legacy serial equipment. With a 0.20-meter flat ribbon cable, industrial-grade materials, and precise pin mapping, it provides a robust, plug-and-play solution for embedded and automation applications.

Designed for ease of installation, signal integrity, and long-term reliability, the CB-F10M9-20 is an essential accessory for engineers and system integrators working with Artila’s iPAC-50XX platform, enabling seamless RS-232 connectivity in compact, space-constrained environments.