Comprehensive Product Summary: ADLINK cPCI-6208V-GL 8-Channel 16-Bit Analog Output CompactPCI Card

---

### 1. Product Overview

Product Name: cPCI-6208V-GL
Model Number: cPCI-6208V-GL
Series: 6208/6216-GL Series Multi-Channel Analog Output Cards
Article Number: cPCI-6208V-GL
Manufacturer: ADLINK Technology Inc.
Form Factor: 3U Eurocard, CompactPCI compliant (PICMG 2.0 R2.1)
Product Type: 8-channel, 16-bit analog voltage output module for CompactPCI systems

The ADLINK cPCI-6208V-GL is part of the 6208/6216-GL family of high-resolution analog output cards designed for industrial automation, test, and measurement applications. It provides eight independent 16-bit digital-to-analog (D/A) voltage output channels with ±10 V bipolar range, integrated digital I/O, and full CompactPCI compliance.

---

### 2. Key Features

- High-Resolution Analog Output:
8 independent 16-bit D/A channels with ±10 V bipolar output range.
- Fast Response:
Typical settling time of 130 µs for a 20 V step and a slew rate of 26 V/µs.
- CompactPCI Interface:
Fully compliant with PICMG 2.0 R2.1 CompactPCI specification, 3U Eurocard form factor.
- Integrated Digital I/O:
4 TTL-compatible digital input channels and 4 TTL-compatible digital output channels.
- High Accuracy:
Gain error ±0.2% maximum, differential nonlinearity (DNL) ±1 LSB typical.
- Output Drive Capability:
±5 mA maximum per channel.
- Plug and Play Configuration:
Automatic resource assignment via PCI Plug and Play BIOS.
- Software Support:
Drivers and SDKs for Windows 7/8 (x86/x64) and Linux; compatible with LabVIEW™, MATLAB®, C/C++, Visual Basic, and Visual Studio.NET.
- Calibration and Utility Tools:
Factory-calibrated with precision DMM; includes DOS-based utility for function testing and calibration.
- Robust Design:
Industrial-grade operating temperature range (0°C to 50°C) and humidity tolerance (5–95% non-condensing).

---

### 3. Technical Specifications

Analog Voltage Output:
- Channels: 8 voltage outputs
- Resolution: 16 bits (15-bit monotonicity typical)
- Output Range: ±10 V bipolar
- Output Drive: ±5 mA maximum
- Settling Time: 130 µs typical for 20 V step
- Slew Rate: 26 V/µs typical
- Gain Error: ±0.2% maximum
- Differential Nonlinearity (DNL): ±1 LSB typical
- Output Initial Status: 0 V after power-on or reset
- Data Transfer: Programmed I/O

Digital I/O:
- Channels: 4 digital inputs, 4 digital outputs
- Logic Level: 5 V TTL compatible
- Input Voltage: Low ≤ 0.8 V, High ≥ 2.0 V
- Output Voltage: Low ≤ 0.4 V, High ≥ 2.4 V
- Drive Capability: Sink 8 mA, Source 0.4 mA

Electrical and Power Requirements:
- +5 VDC: 500 mA typical
- +12 VDC: 200 mA typical

Environmental Conditions:
- Operating Temperature: 0°C to +50°C (32°F to 122°F)
- Storage Temperature: -20°C to +80°C (-4°F to 176°F)
- Relative Humidity: 5% to 95%, non-condensing

Physical Characteristics:
- Dimensions: 160 mm × 100 mm (6.24" × 3.9")
- Connector: One 37-pin D-sub female connector
- Form Factor: 3U Eurocard, CompactPCI compliant

---

### 4. Functionality

The cPCI-6208V-GL performs high-precision digital-to-analog conversion for generating analog voltage signals in industrial and laboratory environments. Each of the eight channels operates independently, allowing simultaneous or sequential updates. The card’s ±10 V bipolar range supports a wide variety of control and simulation tasks.

Typical Use Cases:
- Industrial process control and automation
- Servo and motion control systems
- Signal generation and waveform synthesis
- Reference voltage generation
- Automated test equipment (ATE)
- SCADA and HMI integration

Compatibility:
- CompactPCI backplanes compliant with PICMG 2.0 R2.1
- Compatible with ADLINK’s DAQPilot, DAQMaster, and legacy PCIS-DASK drivers
- Supported by third-party environments such as MATLAB® and LabVIEW™

---

### 5. Components & Accessories

Included Components:
- cPCI-6208V-GL analog output card
- ADLINK All-in-One Software CD (drivers, utilities, documentation)
- User’s Manual

Optional Accessories:
- DIN-37D-01: Terminal board with one 37-pin D-sub connector and DIN-rail mounting
- ACLD-9137-01: General-purpose terminal board with 37-pin D-sub male connector
- ACLD-9137F-01: General-purpose terminal board with 37-pin D-sub female connector
- ACL-10137-1MM: 37-pin D-sub male/male cable, 1 meter
- ACL-10137-1MF: 37-pin D-sub male/female cable, 1 meter

These accessories provide flexible connectivity and simplified wiring for laboratory and industrial setups.

---

### 6. Installation & Setup

Installation Requirements:
- CompactPCI chassis with available 3U slot
- Proper grounding and anti-static precautions during handling
- Compatible operating system (Windows 7/8 or Linux)

Installation Steps:
1. Power off the CompactPCI system and disconnect all peripherals.
2. Insert the cPCI-6208V-GL card into an available CompactPCI slot.
3. Secure the card using the chassis mounting screws.
4. Power on the system; the BIOS will automatically assign resources.
5. Install ADLINK DAQPilot or legacy PCIS-DASK drivers from the All-in-One CD.
6. Verify installation using DAQMaster or the DOS-based 6208UTIL utility.

Configuration:
- Plug and Play configuration via PCI BIOS; no manual jumper settings required.
- Automatic assignment of base addresses and interrupts.

Calibration:
- Factory-calibrated using precision 6½-digit DMM.
- Recommended recalibration interval: 1 year.

---

### 7. Performance & Capabilities

Analog Output Performance:
- 16-bit resolution ensures fine voltage granularity (1 LSB ≈ 0.00031 V).
- ±10 V range supports both positive and negative control signals.
- High slew rate (26 V/µs) allows rapid voltage transitions for dynamic control.
- Typical settling time of 130 µs ensures stable output for high-speed applications.

Digital I/O Performance:
- TTL-compatible I/O suitable for triggering, status monitoring, or control signaling.
- Programmed I/O mode for direct software control.

Efficiency and Limitations:
- Optimized for voltage output applications; current output not supported on this model (available on PCI-6208A).
- Maximum output current limited to ±5 mA per channel.
- Designed for moderate-speed analog generation rather than high-frequency waveform synthesis.

---

### 8. Standards & Compliance

Bus and Interface Standards:
- CompactPCI compliant with PICMG 2.0 R2.1
- 32-bit CompactPCI bus interface

Electrical and Safety Compliance:
- Designed to meet industrial-grade environmental and electrical standards
- CE and FCC compliance (per ADLINK standard manufacturing practices)

Software and Driver Standards:
- DAQPilot driver framework for Windows
- DASK/X driver for Linux
- MATLAB® Data Acquisition Toolbox adapter
- LabVIEW™ VI set (DAQ-LVIEW PnP)
- ActiveX and VEE™ interface support

Industry Compatibility:
- Compatible with ADLINK’s full DAQ ecosystem, including PCI, PCIe, and PXI form factors.

---

### 9. Additional Information

Warranty:
- Standard ADLINK limited warranty (typically one year, extendable via service agreements).

Support and Maintenance:
- Global technical support via ADLINK regional offices (Taiwan, USA, China, Japan, Germany, France, Korea, Singapore, India).
- Email support: service@adlinktech.com
- Calibration and repair services available through authorized ADLINK service centers.

Software Updates:
- Regular driver and SDK updates available at [www.adlinktech.com](https://www.adlinktech.com).
- DAQPilot and DAQMaster software maintained for compatibility with new OS versions.

Documentation:
- User’s Manual (Part Number: 50-11234-2020, Revision 4.03, August 28, 2009)
- Updated specifications as of September 23, 2014

Safety Notes:
- Handle the card using anti-static precautions.
- Operate only within specified temperature and humidity ranges.
- Disconnect power before installation or removal.
- Service only by qualified personnel.

---

### Summary

The ADLINK cPCI-6208V-GL is a high-performance, 8-channel, 16-bit analog output card engineered for CompactPCI systems. It delivers precise ±10 V voltage outputs with fast response and high linearity, making it ideal for industrial automation, process control, and test instrumentation. With integrated digital I/O, robust software support, and full CompactPCI compliance, it provides a reliable and flexible solution for demanding analog output applications.

Its combination of precision, speed, and software versatility—along with ADLINK’s global support infrastructure—positions the cPCI-6208V-GL as a dependable choice for engineers and system integrators seeking accurate, programmable analog voltage generation in modular CompactPCI environments.