LOOKING FOR THE RIGHT
INDUSTRIAL SOLUTION?
Discover embedded, communication and automation solutions tailored to your application.
- High‑speed Redundant Networking:
Equipped with SUNIX ELITE‑Ring™ technology, providing network recovery in less than 10 ms across ring topologies of up to 300 switches. Supports STP and RSTP (IEEE 802.1D/W) for additional redundancy.
- Industrial‑grade Design:
Rugged IP30 aluminum enclosure, DIN‑rail or wall‑mountable, designed for harsh environments with extended temperature range (‑40 °C ~ +80 °C), vibration, and shock resistance per IEC 60068‑2‑27/‑2‑6/‑2‑32.
- Comprehensive Management:
Managed via Web browser (HTTP/HTTPS), Telnet, RS‑232 console, SNMP v1/v2c/v3, or SUNIX Commander Pro Windows utility. Supports group configuration, firmware upgrade, and topology visualization.
- Advanced Security:
IEEE 802.1X authentication, RADIUS server integration, HTTPS/SSH secure access, IP and MAC‑based access control, and port security (MAC binding).
- Traffic Optimization:
IEEE 802.1Q VLAN and GVRP for network segmentation, QoS/ToS prioritization, IGMP snooping v1/v2/v3 for multicast filtering, and port trunking (IEEE 802.3ad LACP) for bandwidth aggregation.
- Diagnostics and Alerts:
Configurable relay output alarm (1 A @ 24 V DC), email and Syslog event notifications, SNMP traps, and LED indicators for power, fault, link/activity, and ring status.
- Redundant Power Inputs:
Dual 12 – 48 V DC inputs with reverse polarity and surge protection (2000 V DC), ensuring uninterrupted operation.
- Ease of Integration:
Compatible with industrial automation systems (PLCs, SCADA, DCS) and supports deterministic Ethernet for real‑time control applications.
Equipped with SUNIX ELITE‑Ring™ technology, providing network recovery in less than 10 ms across ring topologies of up to 300 switches. Supports STP and RSTP (IEEE 802.1D/W) for additional redundancy.
- Industrial‑grade Design:
Rugged IP30 aluminum enclosure, DIN‑rail or wall‑mountable, designed for harsh environments with extended temperature range (‑40 °C ~ +80 °C), vibration, and shock resistance per IEC 60068‑2‑27/‑2‑6/‑2‑32.
- Comprehensive Management:
Managed via Web browser (HTTP/HTTPS), Telnet, RS‑232 console, SNMP v1/v2c/v3, or SUNIX Commander Pro Windows utility. Supports group configuration, firmware upgrade, and topology visualization.
- Advanced Security:
IEEE 802.1X authentication, RADIUS server integration, HTTPS/SSH secure access, IP and MAC‑based access control, and port security (MAC binding).
- Traffic Optimization:
IEEE 802.1Q VLAN and GVRP for network segmentation, QoS/ToS prioritization, IGMP snooping v1/v2/v3 for multicast filtering, and port trunking (IEEE 802.3ad LACP) for bandwidth aggregation.
- Diagnostics and Alerts:
Configurable relay output alarm (1 A @ 24 V DC), email and Syslog event notifications, SNMP traps, and LED indicators for power, fault, link/activity, and ring status.
- Redundant Power Inputs:
Dual 12 – 48 V DC inputs with reverse polarity and surge protection (2000 V DC), ensuring uninterrupted operation.
- Ease of Integration:
Compatible with industrial automation systems (PLCs, SCADA, DCS) and supports deterministic Ethernet for real‑time control applications.
Comprehensive Product Summary – SUNIX ESW-8062-MM-E Managed Industrial Ethernet Switch
### 1. Product Overview
Product Name: Managed Industrial Ethernet Switch
Model: ESW-8062-MM-E
Series: ESW-8062-xx Series (Managed Redundant Ethernet Switches)
Article Number: ESW-8062-MM-E
Manufacturer: SUNIX Co., Ltd.
The SUNIX ESW-8062-MM-E is a managed industrial-grade Ethernet switch designed for mission-critical automation and control networks. It belongs to the ESW-8062 series, which provides 6 copper 10/100Base‑T(X) ports and 2 fiber 100Base‑FX (multi‑mode) ports. The “‑E” suffix denotes the extended temperature version, capable of operating from ‑40°C to +80°C. This model integrates SUNIX’s proprietary ELITE‑Ring™ redundancy technology, ensuring sub‑10 ms recovery across up to 50 interconnected units, making it ideal for deterministic, high‑availability industrial Ethernet environments.
### 2. Key Features
- High‑speed Redundant Networking:
Equipped with SUNIX ELITE‑Ring™ technology, providing network recovery in less than 10 ms across ring topologies of up to 300 switches. Supports STP and RSTP (IEEE 802.1D/W) for additional redundancy.
- Industrial‑grade Design:
Rugged IP30 aluminum enclosure, DIN‑rail or wall‑mountable, designed for harsh environments with extended temperature range (‑40 °C ~ +80 °C), vibration, and shock resistance per IEC 60068‑2‑27/‑2‑6/‑2‑32.
- Comprehensive Management:
Managed via Web browser (HTTP/HTTPS), Telnet, RS‑232 console, SNMP v1/v2c/v3, or SUNIX Commander Pro Windows utility. Supports group configuration, firmware upgrade, and topology visualization.
- Advanced Security:
IEEE 802.1X authentication, RADIUS server integration, HTTPS/SSH secure access, IP and MAC‑based access control, and port security (MAC binding).
- Traffic Optimization:
IEEE 802.1Q VLAN and GVRP for network segmentation, QoS/ToS prioritization, IGMP snooping v1/v2/v3 for multicast filtering, and port trunking (IEEE 802.3ad LACP) for bandwidth aggregation.
- Diagnostics and Alerts:
Configurable relay output alarm (1 A @ 24 V DC), email and Syslog event notifications, SNMP traps, and LED indicators for power, fault, link/activity, and ring status.
- Redundant Power Inputs:
Dual 12 – 48 V DC inputs with reverse polarity and surge protection (2000 V DC), ensuring uninterrupted operation.
- Ease of Integration:
Compatible with industrial automation systems (PLCs, SCADA, DCS) and supports deterministic Ethernet for real‑time control applications.
### 3. Technical Specifications
Ports and Interfaces
- 6 × 10/100Base‑T(X) RJ‑45 ports (auto‑negotiation, auto MDI/MDI‑X)
- 2 × 100Base‑FX multi‑mode fiber ports (SC/ST connector options)
- 1 × RS‑232 console port (RJ‑45)
- 1 × configurable relay output (1 A @ 24 V DC)
Fiber Optic Characteristics
- Multi‑mode: 50/125 µm, standard 2 km @ 1300 nm
- TX Output: –20 to –14 dBm RX Sensitivity: –34 to –30 dBm
Performance
- Switching method: Store‑and‑Forward
- Forwarding rate: 148,800 pps per port
- MAC address table: 8 K entries
- Flow control: IEEE 802.3x (full‑duplex), back‑pressure (half‑duplex)
Power
- Input voltage: 12 – 48 V DC (redundant dual inputs + DC jack)
- Power consumption: ≤ 9 W max
- Protection: Reverse polarity, overload current (1.6 A), surge 2000 V DC
- ESD protection: 4 kV DC on Ethernet ports
Mechanical
- Dimensions (D × W × H): 56.5 × 110 × 150 mm
- Weight: approx. 1.0 kg
- Enclosure: IP30 aluminum housing
- Mounting: DIN‑rail and wall‑mountable
Environmental
- Operating temperature: 0 – 60 °C (standard) / –40 – 80 °C (extended E model)
- Storage temperature: –40 – 85 °C
- Humidity: 5 – 95 % RH (non‑condensing)
Reliability
- MTBF: > 830,000 hours
- Warranty: 5 years
### 4. Functionality
The ESW‑8062‑MM‑E functions as a managed Layer 2 Fast Ethernet switch optimized for industrial automation networks. It provides deterministic communication through redundant ring topologies and supports both copper and fiber media for flexible deployment.
Use Cases and Applications
- Factory automation and process control networks
- Transportation and traffic control systems
- Building and utility automation
- Power substations and energy management
- Remote monitoring and SCADA systems
Operational Overview
Data packets are processed using store‑and‑forward switching with full‑duplex flow control. The switch automatically negotiates link speed and duplex mode per port. In ring configurations, ELITE‑Ring™ ensures sub‑10 ms recovery by dynamically rerouting traffic upon link failure. VLANs and QoS mechanisms prioritize critical control traffic, while SNMP and Syslog provide centralized monitoring.
Compatibility
Compliant with IEEE 802.3/802.3u/802.3x/802.1D/802.1W/802.1Q/802.1p/802.1X standards, ensuring interoperability with third‑party industrial Ethernet devices and backbone switches.
### 5. Components & Accessories
Included Items
- ESW‑8062‑MM‑E managed switch unit
- DIN‑rail mounting kit
- Wall‑mount bracket set
- Quick installation guide
- CD‑ROM with user manual and SUNIX Commander Pro utility
Optional Accessories
- RJ‑45 to DB‑9 console cable
- Fiber connector options (SC or ST)
- External 24 V DC power adapter
- Replacement terminal block connectors
Connectors
- 7‑pin removable terminal block for dual DC inputs and relay output
- DC jack for auxiliary power input
### 6. Installation & Setup
Requirements
- Power supply: 12 – 48 V DC (24 V nominal)
- Mounting surface or DIN‑rail (35 mm standard)
- Ethernet cabling: Cat 5e or better for copper; 50/125 µm MM fiber for optical ports
Mounting Options
- DIN‑Rail: Attach the included clip to the rear panel and snap onto the rail.
- Wall Mount: Use the provided brackets and screws for panel installation.
Configuration Interfaces
1. Web Browser (HTTP/HTTPS): Default IP 192.168.1.1 / admin login.
2. Telnet Console: Remote text‑based configuration.
3. RS‑232 Serial Console: 9600 bps, 8‑N‑1 for local setup.
4. SUNIX Commander Pro: Windows utility for multi‑device management, topology mapping, firmware updates, and configuration backup/restore.
5. SNMP v1/v2c/v3: Integration with network management systems.
Initial Setup Steps
- Connect power and network cables.
- Access via web or console using default credentials (admin/admin).
- Assign static IP or enable DHCP client.
- Configure VLANs, redundancy, and security as required.
- Save configuration to flash memory to retain settings after reboot.
### 7. Performance & Capabilities
Switching Performance
- Wire‑speed forwarding on all ports
- Store‑and‑forward latency < 10 µs
- 8 K MAC address table with automatic learning and aging
Redundancy & Recovery
- ELITE‑Ring™: < 10 ms recovery (≤ 300 nodes)
- RSTP/STP: IEEE 802.1W/D compliant
- Dual Homing & Ring Coupling: Enhanced fault tolerance
Traffic Management
- QoS/ToS: Four priority queues (8:4:2:1 weighted or strict priority)
- VLAN: IEEE 802.1Q tagged and port‑based VLANs (IDs 1–4094)
- Port Trunking: IEEE 802.3ad LACP for bandwidth aggregation
- Rate Limiting: Ingress/egress 100 kbps – 102 Mbps granularity
- Port Mirroring: TX/RX monitoring for diagnostics
Security Features
- IEEE 802.1X port‑based authentication
- RADIUS server support (UDP 1812/1813)
- HTTPS and SSH encrypted management
- IP and MAC filtering, port security (MAC binding)
- Configurable admin password and SNMP community strings
Diagnostics & Monitoring
- SNMP traps (cold/warm start, link up/down, topology change)
- Syslog and SMTP email alerts
- Port statistics (TX/RX good/bad packets, collisions)
- Event log and MAC address table display
- Relay output for power failure or link fault alarms
Limitations
- Fast Ethernet (100 Mbps) uplinks only – no Gigabit ports
- Fiber distance limited to 2 km for multi‑mode operation
### 8. Standards & Compliance
IEEE Standards
IEEE 802.3 (10Base‑T)
IEEE 802.3u (100Base‑TX/FX)
IEEE 802.3x (Flow Control)
IEEE 802.1D (Spanning Tree Protocol)
IEEE 802.1W (Rapid Spanning Tree Protocol)
IEEE 802.1Q (VLAN Tagging)
IEEE 802.1p (QoS Priority)
IEEE 802.1X (Port‑based Network Access Control)
IEEE 802.3ad (Link Aggregation Control Protocol)
Protocols Supported
IGMP v1/v2/v3, GVRP, GMRP, SNMP v1/v2c/v3, DHCP Server/Client, BootP, TFTP, SNTP, SMTP, RARP, RMON Groups 1, 2, 3, 9
MIB Support
MIB‑II, Ethernet‑Like MIB, Bridge MIB, Q‑Bridge MIB, P‑Bridge MIB, RSTP MIB, SUNIX Private MIB
Safety & EMC Certifications
- UL 60950, UL 508, CAN/CSA C22.2 No. 60950
- UL/cUL Class I Division 2 Hazardous Location
- FCC Part 15 Class A, CISPR (EN55022) Class A, CE Mark
- IEC 60068‑2‑27 (Shock), ‑2‑32 (Free‑fall), ‑2‑6 (Vibration)
- EN 61000‑4‑2 (ESD Level 3), ‑4‑3 (RS Level 3), ‑4‑4 (EFT Level 2), ‑4‑5 (Surge Level 3), ‑4‑6 (CS Level 3)
Environmental Compliance
RoHS and WEEE compliant
### 9. Additional Information
Warranty & Support
- Standard 5‑year limited hardware warranty
- Technical support via email (info@sunix‑ncci.com.tw) and web portal (www.sunix‑ncci.com.tw)
- Firmware updates and manuals available online
Maintenance
- Configuration backup and restore via TFTP or SUNIX Commander Pro
- Firmware upgrade through TFTP or group update wizard
- Periodic inspection of fiber connectors and terminal blocks recommended
Model Variants (Ordering Information)
- ESW‑8062‑TX: 6 × 10/100 TX + 2 × 10/100 TX
- ESW‑8062‑MM: 6 × 10/100 TX + 2 × 100 FX (Multi‑Mode)
- ESW‑8062‑SS: 6 × 10/100 TX + 2 × 100 FX (Single‑Mode)
- ‑E Suffix: Extended temperature (‑40 ~ 80 °C) version
Typical Network Architecture
In a ring topology, multiple ESW‑8062‑MM‑E units interconnect via fiber FX ports, forming a redundant backbone. Copper TX ports connect to PLCs, HMIs, and sensors. In case of a link failure, ELITE‑Ring™ automatically reroutes traffic within 10 ms, maintaining uninterrupted communication.
### Summary
The SUNIX ESW‑8062‑MM‑E is a robust, fully managed 8‑port Fast Ethernet switch engineered for industrial automation networks requiring high reliability, deterministic performance, and extended environmental endurance. With dual power inputs, fiber uplinks, and advanced redundancy features, it ensures continuous operation in harsh conditions. Comprehensive management interfaces, security controls, and diagnostic tools make it suitable for mission‑critical applications in manufacturing, transportation, and energy sectors. Its combination of < 10 ms recovery, ‑40 ~ 80 °C operation, and 5‑year warranty positions it as a reliable core component for industrial Ethernet infrastructure.
### 1. Product Overview
Product Name: Managed Industrial Ethernet Switch
Model: ESW-8062-MM-E
Series: ESW-8062-xx Series (Managed Redundant Ethernet Switches)
Article Number: ESW-8062-MM-E
Manufacturer: SUNIX Co., Ltd.
The SUNIX ESW-8062-MM-E is a managed industrial-grade Ethernet switch designed for mission-critical automation and control networks. It belongs to the ESW-8062 series, which provides 6 copper 10/100Base‑T(X) ports and 2 fiber 100Base‑FX (multi‑mode) ports. The “‑E” suffix denotes the extended temperature version, capable of operating from ‑40°C to +80°C. This model integrates SUNIX’s proprietary ELITE‑Ring™ redundancy technology, ensuring sub‑10 ms recovery across up to 50 interconnected units, making it ideal for deterministic, high‑availability industrial Ethernet environments.
### 2. Key Features
- High‑speed Redundant Networking:
Equipped with SUNIX ELITE‑Ring™ technology, providing network recovery in less than 10 ms across ring topologies of up to 300 switches. Supports STP and RSTP (IEEE 802.1D/W) for additional redundancy.
- Industrial‑grade Design:
Rugged IP30 aluminum enclosure, DIN‑rail or wall‑mountable, designed for harsh environments with extended temperature range (‑40 °C ~ +80 °C), vibration, and shock resistance per IEC 60068‑2‑27/‑2‑6/‑2‑32.
- Comprehensive Management:
Managed via Web browser (HTTP/HTTPS), Telnet, RS‑232 console, SNMP v1/v2c/v3, or SUNIX Commander Pro Windows utility. Supports group configuration, firmware upgrade, and topology visualization.
- Advanced Security:
IEEE 802.1X authentication, RADIUS server integration, HTTPS/SSH secure access, IP and MAC‑based access control, and port security (MAC binding).
- Traffic Optimization:
IEEE 802.1Q VLAN and GVRP for network segmentation, QoS/ToS prioritization, IGMP snooping v1/v2/v3 for multicast filtering, and port trunking (IEEE 802.3ad LACP) for bandwidth aggregation.
- Diagnostics and Alerts:
Configurable relay output alarm (1 A @ 24 V DC), email and Syslog event notifications, SNMP traps, and LED indicators for power, fault, link/activity, and ring status.
- Redundant Power Inputs:
Dual 12 – 48 V DC inputs with reverse polarity and surge protection (2000 V DC), ensuring uninterrupted operation.
- Ease of Integration:
Compatible with industrial automation systems (PLCs, SCADA, DCS) and supports deterministic Ethernet for real‑time control applications.
### 3. Technical Specifications
Ports and Interfaces
- 6 × 10/100Base‑T(X) RJ‑45 ports (auto‑negotiation, auto MDI/MDI‑X)
- 2 × 100Base‑FX multi‑mode fiber ports (SC/ST connector options)
- 1 × RS‑232 console port (RJ‑45)
- 1 × configurable relay output (1 A @ 24 V DC)
Fiber Optic Characteristics
- Multi‑mode: 50/125 µm, standard 2 km @ 1300 nm
- TX Output: –20 to –14 dBm RX Sensitivity: –34 to –30 dBm
Performance
- Switching method: Store‑and‑Forward
- Forwarding rate: 148,800 pps per port
- MAC address table: 8 K entries
- Flow control: IEEE 802.3x (full‑duplex), back‑pressure (half‑duplex)
Power
- Input voltage: 12 – 48 V DC (redundant dual inputs + DC jack)
- Power consumption: ≤ 9 W max
- Protection: Reverse polarity, overload current (1.6 A), surge 2000 V DC
- ESD protection: 4 kV DC on Ethernet ports
Mechanical
- Dimensions (D × W × H): 56.5 × 110 × 150 mm
- Weight: approx. 1.0 kg
- Enclosure: IP30 aluminum housing
- Mounting: DIN‑rail and wall‑mountable
Environmental
- Operating temperature: 0 – 60 °C (standard) / –40 – 80 °C (extended E model)
- Storage temperature: –40 – 85 °C
- Humidity: 5 – 95 % RH (non‑condensing)
Reliability
- MTBF: > 830,000 hours
- Warranty: 5 years
### 4. Functionality
The ESW‑8062‑MM‑E functions as a managed Layer 2 Fast Ethernet switch optimized for industrial automation networks. It provides deterministic communication through redundant ring topologies and supports both copper and fiber media for flexible deployment.
Use Cases and Applications
- Factory automation and process control networks
- Transportation and traffic control systems
- Building and utility automation
- Power substations and energy management
- Remote monitoring and SCADA systems
Operational Overview
Data packets are processed using store‑and‑forward switching with full‑duplex flow control. The switch automatically negotiates link speed and duplex mode per port. In ring configurations, ELITE‑Ring™ ensures sub‑10 ms recovery by dynamically rerouting traffic upon link failure. VLANs and QoS mechanisms prioritize critical control traffic, while SNMP and Syslog provide centralized monitoring.
Compatibility
Compliant with IEEE 802.3/802.3u/802.3x/802.1D/802.1W/802.1Q/802.1p/802.1X standards, ensuring interoperability with third‑party industrial Ethernet devices and backbone switches.
### 5. Components & Accessories
Included Items
- ESW‑8062‑MM‑E managed switch unit
- DIN‑rail mounting kit
- Wall‑mount bracket set
- Quick installation guide
- CD‑ROM with user manual and SUNIX Commander Pro utility
Optional Accessories
- RJ‑45 to DB‑9 console cable
- Fiber connector options (SC or ST)
- External 24 V DC power adapter
- Replacement terminal block connectors
Connectors
- 7‑pin removable terminal block for dual DC inputs and relay output
- DC jack for auxiliary power input
### 6. Installation & Setup
Requirements
- Power supply: 12 – 48 V DC (24 V nominal)
- Mounting surface or DIN‑rail (35 mm standard)
- Ethernet cabling: Cat 5e or better for copper; 50/125 µm MM fiber for optical ports
Mounting Options
- DIN‑Rail: Attach the included clip to the rear panel and snap onto the rail.
- Wall Mount: Use the provided brackets and screws for panel installation.
Configuration Interfaces
1. Web Browser (HTTP/HTTPS): Default IP 192.168.1.1 / admin login.
2. Telnet Console: Remote text‑based configuration.
3. RS‑232 Serial Console: 9600 bps, 8‑N‑1 for local setup.
4. SUNIX Commander Pro: Windows utility for multi‑device management, topology mapping, firmware updates, and configuration backup/restore.
5. SNMP v1/v2c/v3: Integration with network management systems.
Initial Setup Steps
- Connect power and network cables.
- Access via web or console using default credentials (admin/admin).
- Assign static IP or enable DHCP client.
- Configure VLANs, redundancy, and security as required.
- Save configuration to flash memory to retain settings after reboot.
### 7. Performance & Capabilities
Switching Performance
- Wire‑speed forwarding on all ports
- Store‑and‑forward latency < 10 µs
- 8 K MAC address table with automatic learning and aging
Redundancy & Recovery
- ELITE‑Ring™: < 10 ms recovery (≤ 300 nodes)
- RSTP/STP: IEEE 802.1W/D compliant
- Dual Homing & Ring Coupling: Enhanced fault tolerance
Traffic Management
- QoS/ToS: Four priority queues (8:4:2:1 weighted or strict priority)
- VLAN: IEEE 802.1Q tagged and port‑based VLANs (IDs 1–4094)
- Port Trunking: IEEE 802.3ad LACP for bandwidth aggregation
- Rate Limiting: Ingress/egress 100 kbps – 102 Mbps granularity
- Port Mirroring: TX/RX monitoring for diagnostics
Security Features
- IEEE 802.1X port‑based authentication
- RADIUS server support (UDP 1812/1813)
- HTTPS and SSH encrypted management
- IP and MAC filtering, port security (MAC binding)
- Configurable admin password and SNMP community strings
Diagnostics & Monitoring
- SNMP traps (cold/warm start, link up/down, topology change)
- Syslog and SMTP email alerts
- Port statistics (TX/RX good/bad packets, collisions)
- Event log and MAC address table display
- Relay output for power failure or link fault alarms
Limitations
- Fast Ethernet (100 Mbps) uplinks only – no Gigabit ports
- Fiber distance limited to 2 km for multi‑mode operation
### 8. Standards & Compliance
IEEE Standards
IEEE 802.3 (10Base‑T)
IEEE 802.3u (100Base‑TX/FX)
IEEE 802.3x (Flow Control)
IEEE 802.1D (Spanning Tree Protocol)
IEEE 802.1W (Rapid Spanning Tree Protocol)
IEEE 802.1Q (VLAN Tagging)
IEEE 802.1p (QoS Priority)
IEEE 802.1X (Port‑based Network Access Control)
IEEE 802.3ad (Link Aggregation Control Protocol)
Protocols Supported
IGMP v1/v2/v3, GVRP, GMRP, SNMP v1/v2c/v3, DHCP Server/Client, BootP, TFTP, SNTP, SMTP, RARP, RMON Groups 1, 2, 3, 9
MIB Support
MIB‑II, Ethernet‑Like MIB, Bridge MIB, Q‑Bridge MIB, P‑Bridge MIB, RSTP MIB, SUNIX Private MIB
Safety & EMC Certifications
- UL 60950, UL 508, CAN/CSA C22.2 No. 60950
- UL/cUL Class I Division 2 Hazardous Location
- FCC Part 15 Class A, CISPR (EN55022) Class A, CE Mark
- IEC 60068‑2‑27 (Shock), ‑2‑32 (Free‑fall), ‑2‑6 (Vibration)
- EN 61000‑4‑2 (ESD Level 3), ‑4‑3 (RS Level 3), ‑4‑4 (EFT Level 2), ‑4‑5 (Surge Level 3), ‑4‑6 (CS Level 3)
Environmental Compliance
RoHS and WEEE compliant
### 9. Additional Information
Warranty & Support
- Standard 5‑year limited hardware warranty
- Technical support via email (info@sunix‑ncci.com.tw) and web portal (www.sunix‑ncci.com.tw)
- Firmware updates and manuals available online
Maintenance
- Configuration backup and restore via TFTP or SUNIX Commander Pro
- Firmware upgrade through TFTP or group update wizard
- Periodic inspection of fiber connectors and terminal blocks recommended
Model Variants (Ordering Information)
- ESW‑8062‑TX: 6 × 10/100 TX + 2 × 10/100 TX
- ESW‑8062‑MM: 6 × 10/100 TX + 2 × 100 FX (Multi‑Mode)
- ESW‑8062‑SS: 6 × 10/100 TX + 2 × 100 FX (Single‑Mode)
- ‑E Suffix: Extended temperature (‑40 ~ 80 °C) version
Typical Network Architecture
In a ring topology, multiple ESW‑8062‑MM‑E units interconnect via fiber FX ports, forming a redundant backbone. Copper TX ports connect to PLCs, HMIs, and sensors. In case of a link failure, ELITE‑Ring™ automatically reroutes traffic within 10 ms, maintaining uninterrupted communication.
### Summary
The SUNIX ESW‑8062‑MM‑E is a robust, fully managed 8‑port Fast Ethernet switch engineered for industrial automation networks requiring high reliability, deterministic performance, and extended environmental endurance. With dual power inputs, fiber uplinks, and advanced redundancy features, it ensures continuous operation in harsh conditions. Comprehensive management interfaces, security controls, and diagnostic tools make it suitable for mission‑critical applications in manufacturing, transportation, and energy sectors. Its combination of < 10 ms recovery, ‑40 ~ 80 °C operation, and 5‑year warranty positions it as a reliable core component for industrial Ethernet infrastructure.
-
EthernetSwitches.pdf
PDF Catalog
-
ESW-8062-xx_Series.pdf
Manual
No accessories available.
