LOOKING FOR THE RIGHT
INDUSTRIAL SOLUTION?
Discover embedded, communication and automation solutions tailored to your application.
- High‑Performance Managed Gigabit Switching:
12‑port configuration with 8 × 10/100/1000Base‑T(X) PoE P.S.E. ports and 4 × 100/1000Base‑X SFP slots.
24 Gbps switching bandwidth and 14.8 Mpps throughput at 64‑byte packets.
- Advanced PoE+ Capability:
Fully IEEE 802.3at compliant, delivering up to 30 W per port (56 V DC, 590 mA).
Total PoE power budget: 240 W.
Supports PoE scheduling, alive‑check, and auto‑reboot for connected devices.
- Industrial‑Grade Reliability:
EN50155‑compliant for railway and transportation applications.
Dual 50–57 VDC redundant power inputs with overload and reverse‑polarity protection.
MTBF > 670,000 hours; 5‑year warranty.
- Network Redundancy Technologies:
- O‑Ring: Proprietary ORing redundancy with < 20 ms recovery.
- Open‑Ring: Interoperable with third‑party ring protocols.
- O‑Chain: Multi‑ring topology integration for complex networks.
- MRP (IEC 62439‑2): Standardized media redundancy protocol.
- MSTP/RSTP/STP: IEEE 802.1D/w/s spanning tree compatibility.
- Comprehensive Management & Security:
Web GUI, Telnet, CLI (RS‑232 console), SNMP v1/v2c/v3, and Windows utility (Open‑Vision).
HTTPS/SSH encryption, ACLs, 802.1x authentication, TACACS+, RADIUS, and device binding.
DoS/DDoS auto‑prevention and IP/MAC‑based access control.
- Industrial Protocol Support:
Modbus TCP and EtherNet/IP for SCADA/PLC integration.
IEEE 1588v2 (on non‑Lite models) for precision time synchronization.
IPv6 and NTP support for modern network environments.
- Energy Efficiency:
IEEE 802.3az Energy‑Efficient Ethernet reduces power consumption during low traffic periods.
- Diagnostics & Monitoring:
Syslog, SNMP Trap, e‑mail alerts, fault relay output (1 A @ 24 VDC), and LED indicators for power, ring, fault, and PoE status.
12‑port configuration with 8 × 10/100/1000Base‑T(X) PoE P.S.E. ports and 4 × 100/1000Base‑X SFP slots.
24 Gbps switching bandwidth and 14.8 Mpps throughput at 64‑byte packets.
- Advanced PoE+ Capability:
Fully IEEE 802.3at compliant, delivering up to 30 W per port (56 V DC, 590 mA).
Total PoE power budget: 240 W.
Supports PoE scheduling, alive‑check, and auto‑reboot for connected devices.
- Industrial‑Grade Reliability:
EN50155‑compliant for railway and transportation applications.
Dual 50–57 VDC redundant power inputs with overload and reverse‑polarity protection.
MTBF > 670,000 hours; 5‑year warranty.
- Network Redundancy Technologies:
- O‑Ring: Proprietary ORing redundancy with < 20 ms recovery.
- Open‑Ring: Interoperable with third‑party ring protocols.
- O‑Chain: Multi‑ring topology integration for complex networks.
- MRP (IEC 62439‑2): Standardized media redundancy protocol.
- MSTP/RSTP/STP: IEEE 802.1D/w/s spanning tree compatibility.
- Comprehensive Management & Security:
Web GUI, Telnet, CLI (RS‑232 console), SNMP v1/v2c/v3, and Windows utility (Open‑Vision).
HTTPS/SSH encryption, ACLs, 802.1x authentication, TACACS+, RADIUS, and device binding.
DoS/DDoS auto‑prevention and IP/MAC‑based access control.
- Industrial Protocol Support:
Modbus TCP and EtherNet/IP for SCADA/PLC integration.
IEEE 1588v2 (on non‑Lite models) for precision time synchronization.
IPv6 and NTP support for modern network environments.
- Energy Efficiency:
IEEE 802.3az Energy‑Efficient Ethernet reduces power consumption during low traffic periods.
- Diagnostics & Monitoring:
Syslog, SNMP Trap, e‑mail alerts, fault relay output (1 A @ 24 VDC), and LED indicators for power, ring, fault, and PoE status.
Comprehensive Product Summary – IGPS-9084GP-L Industrial Managed Gigabit PoE Ethernet Switch
### 1. Product Overview
Product Name: IGPS-9084GP-L
Model: IGPS-9084GP-L
Series: IGPS-9084GP Series (Lite Version)
Article Number: IGPS-9084GP-L
Manufacturer: ORing Industrial Networking Corp.
Product Type: Industrial Managed 12-Port Gigabit PoE Ethernet Switch
Compliance: EN50155, IEC 62439-2 MRP, IEEE 802.3at PoE+, IP-30 industrial protection
The ORing IGPS-9084GP-L is a rugged, industrial-grade managed Ethernet switch designed for mission-critical applications requiring high reliability, network redundancy, and Power over Ethernet (PoE) capability. It integrates eight 10/100/1000Base‑T(X) PoE P.S.E. ports and four 100/1000Base‑X SFP slots, providing flexible copper and fiber connectivity. The switch supports advanced redundancy technologies such as O‑Ring, Open‑Ring, O‑Chain, and MRP, ensuring network recovery times under 20 ms across up to 250 nodes. It is engineered for harsh environments, featuring an extended operating temperature range of ‑40 °C to 75 °C, redundant 50–57 VDC power inputs, and a robust IP‑30 metal enclosure suitable for DIN‑rail or wall mounting.
### 2. Key Features
- High‑Performance Managed Gigabit Switching:
12‑port configuration with 8 × 10/100/1000Base‑T(X) PoE P.S.E. ports and 4 × 100/1000Base‑X SFP slots.
24 Gbps switching bandwidth and 14.8 Mpps throughput at 64‑byte packets.
- Advanced PoE+ Capability:
Fully IEEE 802.3at compliant, delivering up to 30 W per port (56 V DC, 590 mA).
Total PoE power budget: 240 W.
Supports PoE scheduling, alive‑check, and auto‑reboot for connected devices.
- Industrial‑Grade Reliability:
EN50155‑compliant for railway and transportation applications.
Dual 50–57 VDC redundant power inputs with overload and reverse‑polarity protection.
MTBF > 670,000 hours; 5‑year warranty.
- Network Redundancy Technologies:
- O‑Ring: Proprietary ORing redundancy with < 20 ms recovery.
- Open‑Ring: Interoperable with third‑party ring protocols.
- O‑Chain: Multi‑ring topology integration for complex networks.
- MRP (IEC 62439‑2): Standardized media redundancy protocol.
- MSTP/RSTP/STP: IEEE 802.1D/w/s spanning tree compatibility.
- Comprehensive Management & Security:
Web GUI, Telnet, CLI (RS‑232 console), SNMP v1/v2c/v3, and Windows utility (Open‑Vision).
HTTPS/SSH encryption, ACLs, 802.1x authentication, TACACS+, RADIUS, and device binding.
DoS/DDoS auto‑prevention and IP/MAC‑based access control.
- Industrial Protocol Support:
Modbus TCP and EtherNet/IP for SCADA/PLC integration.
IEEE 1588v2 (on non‑Lite models) for precision time synchronization.
IPv6 and NTP support for modern network environments.
- Energy Efficiency:
IEEE 802.3az Energy‑Efficient Ethernet reduces power consumption during low traffic periods.
- Diagnostics & Monitoring:
Syslog, SNMP Trap, e‑mail alerts, fault relay output (1 A @ 24 VDC), and LED indicators for power, ring, fault, and PoE status.
### 3. Technical Specifications
Ports:
- 8 × 10/100/1000Base‑T(X) RJ‑45 with PoE P.S.E. (Auto MDI/MDIX)
- 4 × 100/1000Base‑X SFP slots
Performance:
- Switching bandwidth: 24 Gbps
- Throughput: 14.8 Mpps @ 64 bytes
- MAC address table: 8 K entries
- Priority queues: 8
- Data buffer: 4 Mbit shared memory
- Switching latency: 7 µs
- Jumbo frame support: 9.6 KB
- VLANs: 4096 (VID 0–4095)
- IGMP multicast groups: 256 per VLAN
PoE Power Output:
- IEEE 802.3af: 15.4 W @ 56 V DC, 350 mA
- IEEE 802.3at: 30 W @ 56 V DC, 590 mA
- Total PoE budget: 240 W
Power Input:
- Dual DC inputs: 50–57 VDC via 6‑pin terminal block
- Typical consumption: 13.2 W (device only)
- Overload and reverse‑polarity protection: Yes
Physical Characteristics:
- Enclosure: IP‑30 aluminum housing
- Dimensions: 96.4 (W) × 105.5 (D) × 154 (H) mm (3.8 × 4.15 × 6.06 in)
- Weight: ≈ 1.2 kg (1205 g)
- Mounting: DIN‑rail / wall‑mount
Environmental:
- Operating temperature: ‑40 °C to 75 °C (‑40 °F to 167 °F)
- Storage temperature: ‑40 °C to 85 °C (‑40 °F to 185 °F)
- Humidity: 5 % – 95 % non‑condensing
Reliability:
- MTBF: 670,898 hours
- Warranty: 5 years
### 4. Functionality
Operation & Management:
The IGPS‑9084GP‑L operates as a fully managed Layer 2 switch supporting VLAN segmentation, QoS prioritization, redundancy, and security. Configuration is accessible via:
- Web interface: HTTPS‑secured browser management.
- CLI: RS‑232 (115200 bps, 8‑N‑1) or Telnet.
- SNMP: v1/v2c/v3 with RMON groups.
- Open‑Vision Utility: Windows‑based centralized management for up to 500 devices.
Use Cases:
- IP surveillance networks (PoE cameras, NVRs).
- Transportation and railway systems (EN50155).
- Industrial automation and SCADA integration.
- Power substations, utilities, and energy systems.
- Outdoor or remote PoE device deployments.
Compatibility:
Supports standard Ethernet protocols and interoperates with third‑party switches via Open‑Ring and MRP. Compatible with ORing’s DBU‑01 configuration backup unit and SFP100/SFP1G optical transceivers.
### 5. Components & Accessories
Included:
- IGPS‑9084GP‑L switch unit
- DIN‑rail mounting kit
- Quick Installation Guide
Optional Accessories:
- Wall‑mount kit (2 pcs)
- Console cable (RJ‑45 to DB‑9)
- ORing Tool CD
- Open‑Vision M500 network management suite (up to 500 devices)
- DBU‑01 configuration backup unit
- SFP100 series (100 Mbps SFP transceivers)
- SFP 1G series (1 Gbps SFP transceivers)
Connectors:
- 6‑pin terminal block for dual DC input
- RJ‑45 ports for copper Ethernet/PoE
- SFP slots for fiber modules
- RJ‑45 console port for serial management
### 6. Installation & Setup
Mounting Options:
- DIN‑Rail: Integrated rear clip for standard 35 mm DIN‑rail.
- Wall‑Mount: Optional brackets for vertical or horizontal installation.
Power Connection:
- Dual DC inputs (V1+, V1–, V2+, V2–) 50–57 VDC.
- Frame ground terminal provided.
Configuration:
- Default IP: 192.168.10.1 / 255.255.255.0
- Default credentials: admin / admin
- Accessible via web browser, Telnet, or console.
- Supports firmware upgrade via web or TFTP.
PoE Pin Assignments:
- 10/100Base‑T(X): Pins 1, 2 (+), 3, 6 (–)
- 1000Base‑T: Pins 1, 2, 3, 6 (+/–) and 4, 5, 7, 8 for power pairs
### 7. Performance & Capabilities
Switching Performance:
- Store‑and‑forward architecture ensures low latency and error‑free transmission.
- 24 Gbps non‑blocking switching fabric.
- 8 priority queues for traffic classification (IEEE 802.1p).
- QoS support for real‑time applications (voice/video).
- VLAN tagging (802.1Q) and GVRP for segmentation.
- IGMP snooping v2/v3 for multicast optimization.
- Port rate limiting and bandwidth management per IP or application.
Redundancy & Recovery:
- O‑Ring < 20 ms recovery time (250 nodes).
- O‑Chain multi‑ring integration.
- Open‑Ring interoperability.
- MRP (IEC 62439‑2) standard redundancy.
- MSTP/RSTP/STP for loop prevention.
- Fast Recovery Mode for redundant uplinks.
Security & Access Control:
- 802.1x port‑based authentication.
- RADIUS and TACACS+ centralized management.
- HTTPS and SSH encrypted sessions.
- ACL filtering and MAC‑based port security.
- Device Binding (IP/MAC pair authorization).
- DoS/DDoS hardware‑based auto‑prevention.
PoE Management:
- Per‑port enable/disable and power scheduling.
- PoE alive check (auto‑ping reboot).
- Power priority (low/high/critical).
- Class‑based power allocation (IEEE 802.3af/at).
Diagnostics & Monitoring:
- Syslog and SNMP Trap notifications.
- Fault relay output (1 A @ 24 VDC).
- LED status indicators for Power, Ring, Fault, PoE, and Link/Activity.
- Cable diagnostics (VeriPHY).
- SFP DDM monitoring for temperature and optical power.
Limitations:
- Lite version (‑L) does not support IEEE 1588 PTP time synchronization.
- PoE budget limited to 240 W total across 8 ports.
### 8. Standards & Compliance
Ethernet Standards:
IEEE 802.3 (10Base‑T)
IEEE 802.3u (100Base‑TX/FX)
IEEE 802.3ab (1000Base‑T)
IEEE 802.3z (1000Base‑X)
IEEE 802.3x (Flow Control)
IEEE 802.3ad (Link Aggregation Control Protocol)
IEEE 802.3at (PoE+)
IEEE 802.1p (Class of Service)
IEEE 802.1Q (VLAN Tagging)
IEEE 802.1D/w/s (STP/RSTP/MSTP)
IEEE 802.1x (Authentication)
IEEE 802.1AB (LLDP)
IEEE 802.3az (Energy‑Efficient Ethernet)
Environmental & Safety:
- EMI: FCC Part 15 Class A, CISPR 32, EN 55032
- EMS: EN 55024, EN 61000‑4‑2 (ESD), ‑4‑3 (RS), ‑4‑4 (EFT), ‑4‑5 (Surge), ‑4‑6 (CS), ‑4‑8, ‑4‑11
- Shock: IEC 60068‑2‑27
- Vibration: IEC 60068‑2‑6
- Free Fall: IEC 60068‑2‑32
- Safety: EN 60950‑1
- Railway: EN 50155 compliant
### 9. Additional Information
Warranty & Support:
- 5‑year limited hardware warranty.
- Technical support via support@oringnet.com.
- Firmware updates and Open‑Vision software available from www.oringnet.com.
Maintenance:
- Configuration backup and restore via DBU‑01 unit or web interface.
- Firmware upgrade via web GUI or TFTP.
- Syslog and SNMP monitoring for preventive maintenance.
Manufacturer Contact:
ORing Industrial Networking Corp.
3F., No. 542‑2, Jhongjheng Rd., Sindian District, New Taipei City 231, Taiwan
Tel: +886‑2‑2218‑1066 | Fax: +886‑2‑2218‑1014
Website: [www.oringnet.com](http://www.oringnet.com)
Email: support@oringnet.com
### Summary
The ORing IGPS‑9084GP‑L is a high‑reliability, industrial‑grade managed Gigabit PoE switch engineered for demanding environments such as transportation, automation, and surveillance. With 12 Gigabit ports, advanced redundancy (O‑Ring < 20 ms), comprehensive security, and full management capabilities, it ensures continuous network operation even under harsh conditions. Its EN50155 compliance, wide ‑40 °C to 75 °C temperature range, and 240 W PoE budget make it ideal for powering and managing distributed IP devices in mission‑critical industrial networks.
### 1. Product Overview
Product Name: IGPS-9084GP-L
Model: IGPS-9084GP-L
Series: IGPS-9084GP Series (Lite Version)
Article Number: IGPS-9084GP-L
Manufacturer: ORing Industrial Networking Corp.
Product Type: Industrial Managed 12-Port Gigabit PoE Ethernet Switch
Compliance: EN50155, IEC 62439-2 MRP, IEEE 802.3at PoE+, IP-30 industrial protection
The ORing IGPS-9084GP-L is a rugged, industrial-grade managed Ethernet switch designed for mission-critical applications requiring high reliability, network redundancy, and Power over Ethernet (PoE) capability. It integrates eight 10/100/1000Base‑T(X) PoE P.S.E. ports and four 100/1000Base‑X SFP slots, providing flexible copper and fiber connectivity. The switch supports advanced redundancy technologies such as O‑Ring, Open‑Ring, O‑Chain, and MRP, ensuring network recovery times under 20 ms across up to 250 nodes. It is engineered for harsh environments, featuring an extended operating temperature range of ‑40 °C to 75 °C, redundant 50–57 VDC power inputs, and a robust IP‑30 metal enclosure suitable for DIN‑rail or wall mounting.
### 2. Key Features
- High‑Performance Managed Gigabit Switching:
12‑port configuration with 8 × 10/100/1000Base‑T(X) PoE P.S.E. ports and 4 × 100/1000Base‑X SFP slots.
24 Gbps switching bandwidth and 14.8 Mpps throughput at 64‑byte packets.
- Advanced PoE+ Capability:
Fully IEEE 802.3at compliant, delivering up to 30 W per port (56 V DC, 590 mA).
Total PoE power budget: 240 W.
Supports PoE scheduling, alive‑check, and auto‑reboot for connected devices.
- Industrial‑Grade Reliability:
EN50155‑compliant for railway and transportation applications.
Dual 50–57 VDC redundant power inputs with overload and reverse‑polarity protection.
MTBF > 670,000 hours; 5‑year warranty.
- Network Redundancy Technologies:
- O‑Ring: Proprietary ORing redundancy with < 20 ms recovery.
- Open‑Ring: Interoperable with third‑party ring protocols.
- O‑Chain: Multi‑ring topology integration for complex networks.
- MRP (IEC 62439‑2): Standardized media redundancy protocol.
- MSTP/RSTP/STP: IEEE 802.1D/w/s spanning tree compatibility.
- Comprehensive Management & Security:
Web GUI, Telnet, CLI (RS‑232 console), SNMP v1/v2c/v3, and Windows utility (Open‑Vision).
HTTPS/SSH encryption, ACLs, 802.1x authentication, TACACS+, RADIUS, and device binding.
DoS/DDoS auto‑prevention and IP/MAC‑based access control.
- Industrial Protocol Support:
Modbus TCP and EtherNet/IP for SCADA/PLC integration.
IEEE 1588v2 (on non‑Lite models) for precision time synchronization.
IPv6 and NTP support for modern network environments.
- Energy Efficiency:
IEEE 802.3az Energy‑Efficient Ethernet reduces power consumption during low traffic periods.
- Diagnostics & Monitoring:
Syslog, SNMP Trap, e‑mail alerts, fault relay output (1 A @ 24 VDC), and LED indicators for power, ring, fault, and PoE status.
### 3. Technical Specifications
Ports:
- 8 × 10/100/1000Base‑T(X) RJ‑45 with PoE P.S.E. (Auto MDI/MDIX)
- 4 × 100/1000Base‑X SFP slots
Performance:
- Switching bandwidth: 24 Gbps
- Throughput: 14.8 Mpps @ 64 bytes
- MAC address table: 8 K entries
- Priority queues: 8
- Data buffer: 4 Mbit shared memory
- Switching latency: 7 µs
- Jumbo frame support: 9.6 KB
- VLANs: 4096 (VID 0–4095)
- IGMP multicast groups: 256 per VLAN
PoE Power Output:
- IEEE 802.3af: 15.4 W @ 56 V DC, 350 mA
- IEEE 802.3at: 30 W @ 56 V DC, 590 mA
- Total PoE budget: 240 W
Power Input:
- Dual DC inputs: 50–57 VDC via 6‑pin terminal block
- Typical consumption: 13.2 W (device only)
- Overload and reverse‑polarity protection: Yes
Physical Characteristics:
- Enclosure: IP‑30 aluminum housing
- Dimensions: 96.4 (W) × 105.5 (D) × 154 (H) mm (3.8 × 4.15 × 6.06 in)
- Weight: ≈ 1.2 kg (1205 g)
- Mounting: DIN‑rail / wall‑mount
Environmental:
- Operating temperature: ‑40 °C to 75 °C (‑40 °F to 167 °F)
- Storage temperature: ‑40 °C to 85 °C (‑40 °F to 185 °F)
- Humidity: 5 % – 95 % non‑condensing
Reliability:
- MTBF: 670,898 hours
- Warranty: 5 years
### 4. Functionality
Operation & Management:
The IGPS‑9084GP‑L operates as a fully managed Layer 2 switch supporting VLAN segmentation, QoS prioritization, redundancy, and security. Configuration is accessible via:
- Web interface: HTTPS‑secured browser management.
- CLI: RS‑232 (115200 bps, 8‑N‑1) or Telnet.
- SNMP: v1/v2c/v3 with RMON groups.
- Open‑Vision Utility: Windows‑based centralized management for up to 500 devices.
Use Cases:
- IP surveillance networks (PoE cameras, NVRs).
- Transportation and railway systems (EN50155).
- Industrial automation and SCADA integration.
- Power substations, utilities, and energy systems.
- Outdoor or remote PoE device deployments.
Compatibility:
Supports standard Ethernet protocols and interoperates with third‑party switches via Open‑Ring and MRP. Compatible with ORing’s DBU‑01 configuration backup unit and SFP100/SFP1G optical transceivers.
### 5. Components & Accessories
Included:
- IGPS‑9084GP‑L switch unit
- DIN‑rail mounting kit
- Quick Installation Guide
Optional Accessories:
- Wall‑mount kit (2 pcs)
- Console cable (RJ‑45 to DB‑9)
- ORing Tool CD
- Open‑Vision M500 network management suite (up to 500 devices)
- DBU‑01 configuration backup unit
- SFP100 series (100 Mbps SFP transceivers)
- SFP 1G series (1 Gbps SFP transceivers)
Connectors:
- 6‑pin terminal block for dual DC input
- RJ‑45 ports for copper Ethernet/PoE
- SFP slots for fiber modules
- RJ‑45 console port for serial management
### 6. Installation & Setup
Mounting Options:
- DIN‑Rail: Integrated rear clip for standard 35 mm DIN‑rail.
- Wall‑Mount: Optional brackets for vertical or horizontal installation.
Power Connection:
- Dual DC inputs (V1+, V1–, V2+, V2–) 50–57 VDC.
- Frame ground terminal provided.
Configuration:
- Default IP: 192.168.10.1 / 255.255.255.0
- Default credentials: admin / admin
- Accessible via web browser, Telnet, or console.
- Supports firmware upgrade via web or TFTP.
PoE Pin Assignments:
- 10/100Base‑T(X): Pins 1, 2 (+), 3, 6 (–)
- 1000Base‑T: Pins 1, 2, 3, 6 (+/–) and 4, 5, 7, 8 for power pairs
### 7. Performance & Capabilities
Switching Performance:
- Store‑and‑forward architecture ensures low latency and error‑free transmission.
- 24 Gbps non‑blocking switching fabric.
- 8 priority queues for traffic classification (IEEE 802.1p).
- QoS support for real‑time applications (voice/video).
- VLAN tagging (802.1Q) and GVRP for segmentation.
- IGMP snooping v2/v3 for multicast optimization.
- Port rate limiting and bandwidth management per IP or application.
Redundancy & Recovery:
- O‑Ring < 20 ms recovery time (250 nodes).
- O‑Chain multi‑ring integration.
- Open‑Ring interoperability.
- MRP (IEC 62439‑2) standard redundancy.
- MSTP/RSTP/STP for loop prevention.
- Fast Recovery Mode for redundant uplinks.
Security & Access Control:
- 802.1x port‑based authentication.
- RADIUS and TACACS+ centralized management.
- HTTPS and SSH encrypted sessions.
- ACL filtering and MAC‑based port security.
- Device Binding (IP/MAC pair authorization).
- DoS/DDoS hardware‑based auto‑prevention.
PoE Management:
- Per‑port enable/disable and power scheduling.
- PoE alive check (auto‑ping reboot).
- Power priority (low/high/critical).
- Class‑based power allocation (IEEE 802.3af/at).
Diagnostics & Monitoring:
- Syslog and SNMP Trap notifications.
- Fault relay output (1 A @ 24 VDC).
- LED status indicators for Power, Ring, Fault, PoE, and Link/Activity.
- Cable diagnostics (VeriPHY).
- SFP DDM monitoring for temperature and optical power.
Limitations:
- Lite version (‑L) does not support IEEE 1588 PTP time synchronization.
- PoE budget limited to 240 W total across 8 ports.
### 8. Standards & Compliance
Ethernet Standards:
IEEE 802.3 (10Base‑T)
IEEE 802.3u (100Base‑TX/FX)
IEEE 802.3ab (1000Base‑T)
IEEE 802.3z (1000Base‑X)
IEEE 802.3x (Flow Control)
IEEE 802.3ad (Link Aggregation Control Protocol)
IEEE 802.3at (PoE+)
IEEE 802.1p (Class of Service)
IEEE 802.1Q (VLAN Tagging)
IEEE 802.1D/w/s (STP/RSTP/MSTP)
IEEE 802.1x (Authentication)
IEEE 802.1AB (LLDP)
IEEE 802.3az (Energy‑Efficient Ethernet)
Environmental & Safety:
- EMI: FCC Part 15 Class A, CISPR 32, EN 55032
- EMS: EN 55024, EN 61000‑4‑2 (ESD), ‑4‑3 (RS), ‑4‑4 (EFT), ‑4‑5 (Surge), ‑4‑6 (CS), ‑4‑8, ‑4‑11
- Shock: IEC 60068‑2‑27
- Vibration: IEC 60068‑2‑6
- Free Fall: IEC 60068‑2‑32
- Safety: EN 60950‑1
- Railway: EN 50155 compliant
### 9. Additional Information
Warranty & Support:
- 5‑year limited hardware warranty.
- Technical support via support@oringnet.com.
- Firmware updates and Open‑Vision software available from www.oringnet.com.
Maintenance:
- Configuration backup and restore via DBU‑01 unit or web interface.
- Firmware upgrade via web GUI or TFTP.
- Syslog and SNMP monitoring for preventive maintenance.
Manufacturer Contact:
ORing Industrial Networking Corp.
3F., No. 542‑2, Jhongjheng Rd., Sindian District, New Taipei City 231, Taiwan
Tel: +886‑2‑2218‑1066 | Fax: +886‑2‑2218‑1014
Website: [www.oringnet.com](http://www.oringnet.com)
Email: support@oringnet.com
### Summary
The ORing IGPS‑9084GP‑L is a high‑reliability, industrial‑grade managed Gigabit PoE switch engineered for demanding environments such as transportation, automation, and surveillance. With 12 Gigabit ports, advanced redundancy (O‑Ring < 20 ms), comprehensive security, and full management capabilities, it ensures continuous network operation even under harsh conditions. Its EN50155 compliance, wide ‑40 °C to 75 °C temperature range, and 240 W PoE budget make it ideal for powering and managing distributed IP devices in mission‑critical industrial networks.
-
DataSheet_IGPS-9084GP-L_en.pdf
PDF Catalog
-
QIG_IGPS-9084GP_V1.0.pdf
Manual
No accessories available.
