Comprehensive Product Summary – ORing IGS-P9164FX-SS-SC-LV Industrial Managed Ethernet Switch

---

### 1. Product Overview

Product Name: IGS-P9164FX-SS-SC-LV
Article Number: IGS-P9164FX-SS-SC-LV
Series: IGS-P9164 Series (Industrial Managed Ethernet Switches)
Manufacturer: ORing Industrial Networking Corp.
Model Type: Managed 20-Port Industrial Ethernet Switch (16×10/100/1000Base‑T(X) + 4×100Base‑FX SS SC)
Power Model: LV (Low Voltage, 12–48 VDC dual input)
Compliance: EN50155 (Railway), IEC 61850‑3 (Power Substation), IEEE 1613 (Utility Automation)
Product Category: Industrial Managed Ethernet Switch for Smart Grid, Power Substation, and Railway Applications

The ORing IGS‑P9164FX‑SS‑SC‑LV is a rugged, fully managed industrial Ethernet switch designed for mission‑critical environments such as power substations, smart grids, and rolling stock systems. It belongs to the IGS‑P9164 series, which includes models IGS‑P9164GF, IGS‑P9164FX, and IGS‑P9164GC, differing primarily in fiber port configurations. The FX‑SS‑SC‑LV variant features 16 copper Gigabit ports and 4 single‑mode fiber ports with SC connectors, optimized for long‑distance, high‑reliability data transmission in harsh industrial conditions.

---

### 2. Key Features

- High‑Port Density: 20 total ports — 16×10/100/1000Base‑T(X) RJ‑45 and 4×100Base‑FX single‑mode SC fiber ports.
- Industrial‑Grade Design: Complies with IEC 61850‑3 and EN50155 standards for electromagnetic immunity, vibration, and shock resistance.
- Wide Operating Temperature: ‑40 °C to +70 °C continuous operation (tested up to +85 °C).
- Dual Redundant Power Inputs: 12–48 VDC dual input with reverse polarity and overload protection.
- High Reliability: O‑Ring redundancy technology with recovery time < 30 ms across up to 250 connected units.
- Advanced Network Management: Supports Web, Telnet, Console, SNMP, and ORing’s Open‑Vision centralized management utility.
- Comprehensive Protocol Support: IEEE 802.3/802.3u/802.3z/802.3ab compliant; supports VLAN, QoS, IGMP Snooping, RSTP/MSTP, LACP, and Modbus TCP.
- Security Features: 802.1x authentication, SNMPv3 encryption, HTTPS/SSH, MAC‑based port security, and DoS/DDoS prevention.
- Rugged Enclosure: IP‑30 rated metal housing for industrial environments.
- Flexible Mounting: DIN‑rail and wall‑mount options included.
- Relay Output: 1 A at 24 VDC alarm relay for fault indication (Fail‑Open/Fail‑Close configurable).
- Comprehensive LED Indicators: Power, Ring, Fault, and Link/Activity LEDs for all ports.
- Long‑Distance Fiber Connectivity: Single‑mode SC fiber ports support up to 30 km transmission distance.

---

### 3. Technical Specifications

Physical Characteristics
- Dimensions (W × D × H): 115 × 159 × 154 mm (4.52 × 6.26 × 6.06 in)
- Weight: Approx. 1.78 kg (LV model)
- Enclosure: IP‑30 rated metal housing
- Mounting: DIN‑rail or wall‑mount (kits included)

Power
- Input Voltage: Dual 12–48 VDC (LV model)
- Power Consumption: Typical 18–21 W
- Protection: Reverse polarity and overload current protection
- Redundancy: Dual power inputs (PWR1, PWR2) with automatic failover

Environmental
- Operating Temperature: ‑40 °C to +70 °C (tested up to +85 °C)
- Storage Temperature: ‑40 °C to +85 °C
- Humidity: 5 % – 95 % RH, non‑condensing
- Vibration: IEC 60068‑2‑6 compliant
- Shock: IEC 60068‑2‑27 compliant
- Free Fall: IEC 60068‑2‑32 compliant

Network Performance
- Switching Bandwidth: 40 Gbps
- Switching Latency: 7 µs
- MAC Address Table: 8 K entries
- Packet Buffer: 4 Mbit
- Priority Queues: 8
- Processing Type: Store‑and‑Forward
- Jumbo Frame Support: Up to 9.6 KB
- VLANs Supported: Up to 256
- IGMP Multicast Groups: 128 per VLAN

Fiber Optics (100Base‑FX Single‑Mode SC)
- Connector Type: SC
- Fiber Type: 9/125 µm single‑mode
- Typical Distance: 30 km
- Wavelength: 1310 nm
- Optical Power Output: Max –8 dBm, Min –15 dBm
- Receiver Sensitivity: –34 dBm
- Link Budget: 19 dB

Copper Ports (10/100/1000Base‑T(X))
- Connector: RJ‑45, Auto MDI/MDI‑X
- Cable Support:
- 10BASE‑T: Cat 3/4/5 UTP, 100 m
- 100BASE‑TX: Cat 5 UTP, 100 m
- 1000BASE‑T: Cat 5/5e UTP, 100 m

---

### 4. Functionality

The IGS‑P9164FX‑SS‑SC‑LV functions as a fully managed Layer 2 industrial Ethernet switch. It provides high‑speed data switching between copper and fiber interfaces, enabling flexible network topologies in distributed industrial systems.

Operation & Management:
- Managed via Web GUI, Telnet, RS‑232 console, or SNMP v1/v2c/v3.
- Compatible with ORing’s Open‑Vision management software for centralized monitoring and configuration.
- Supports DHCP Server/Client, Modbus TCP, and SMTP client for event notifications.

Use Cases:
- Power substations and smart grid automation (IEC 61850‑3 compliance).
- Railway and rolling stock communication networks (EN50155 compliance).
- Industrial automation, SCADA, and process control systems.
- Long‑distance fiber backbone connections in harsh environments.

Compatibility:
- Interoperable with standard Ethernet devices (PCs, PLCs, routers, IP cameras, HMIs).
- Supports redundant ring topologies with O‑Ring, Open‑Ring, O‑Chain, and MRP protocols.

---

### 5. Components & Accessories

Package Contents:
- 1 × IGS‑P9164FX‑SS‑SC‑LV switch unit
- 1 × DIN‑rail mounting kit
- 1 × Wall‑mount kit (with screws)
- 1 × Console cable (RJ‑45 to DB‑9)
- 1 × Quick Installation Guide (QIG)
- 1 × Product CD (manuals and utilities)

Optional Accessories:
- Power cables (for HV models only)
- Fiber patch cords (SC single‑mode)
- ORing Open‑Vision management software

Connectors:
- Power Inputs: Dual 2‑pin terminal blocks (V+, V–)
- Relay Output: 3‑pin terminal block (COM, Fail Open, Fail Close)
- Console Port: RJ‑45 (RS‑232, 115200 bps, 8‑N‑1)

---

### 6. Installation & Setup

Mounting Options:
- DIN‑Rail Installation:
1. Attach the DIN‑rail bracket to the back panel using the provided screws.
2. Hook the switch onto the DIN‑rail and ensure it clicks firmly into place.
- Wall‑Mount Installation:
1. Attach wall‑mount brackets to both sides of the rear panel.
2. Mark and drill holes according to bracket spacing.
3. Insert screws through keyhole slots and slide the unit downward to secure.

Power Wiring:
1. Insert positive and negative wires into V+/V– terminals for PWR1 and PWR2.
2. Tighten terminal screws to secure the connection.
3. Ensure proper grounding to minimize EMI.

Relay Wiring:
- Connect external alarm devices to COM and either Fail Open or Fail Close terminals depending on desired behavior during power failure or fault.

Network Connection:
- Use standard Ethernet cables (Cat 5/5e) for copper ports.
- Use single‑mode fiber (9/125 µm) with SC connectors for fiber ports.

Initial Configuration:
- Default IP Address: 192.168.10.1
- Default Username/Password: admin / admin
- Access via web browser (Internet Explorer 6.0 or later) or console port.

Reset Options:
- Reboot: Press Reset button for 5 seconds.
- Factory Default: Press and hold Reset for 5 seconds during power‑on.

---

### 7. Performance & Capabilities

Switching Performance:
- 40 Gbps switching capacity ensures non‑blocking wire‑speed forwarding.
- Store‑and‑forward architecture with 7 µs latency for deterministic performance.
- 8 priority queues enable advanced QoS for real‑time traffic (voice/video).

Redundancy & Recovery:
- O‑Ring redundancy with < 30 ms recovery time across 250 nodes.
- Supports Open‑Ring, O‑Chain, and MRP for flexible ring topologies.
- MSTP (IEEE 802.1s) and RSTP (IEEE 802.1w) for spanning tree redundancy.

Security & Management:
- 802.1x port‑based authentication and MAC‑based access control.
- SNMPv3, HTTPS, and SSH for encrypted management sessions.
- Radius centralized authentication and password management.
- DoS/DDoS automatic prevention and port disable/enable control.

Traffic Management:
- VLAN tagging (IEEE 802.1Q) and GVRP support.
- IGMP Snooping for multicast filtering.
- TOS/DiffServ and 802.1p QoS for traffic prioritization.
- Port rate limiting and bandwidth management per port.

Limitations:
- Layer 2 switching only (no Layer 3 routing).
- Fiber ports fixed at 100 Mbps (not Gigabit).

---

### 8. Standards & Compliance

Ethernet Standards:
- IEEE 802.3 (10Base‑T)
- IEEE 802.3u (100Base‑TX/FX)
- IEEE 802.3z (1000Base‑X)
- IEEE 802.3ab (1000Base‑T)
- IEEE 802.3ad (LACP)
- IEEE 802.3x (Flow Control)
- IEEE 802.1p (Class of Service)
- IEEE 802.1Q (VLAN Tagging)
- IEEE 802.1w (RSTP)
- IEEE 802.1s (MSTP)
- IEEE 802.1x (Authentication)
- IEEE 802.1AB (LLDP)

Industrial & Environmental Compliance:
- IEC 61850‑3 / IEEE 1613: Power substation and utility automation standards.
- EN50155: Railway applications (EN50121‑3‑2, EN55011, EN55012‑4).
- EMI: FCC Part 15, CISPR (EN55022) Class A.
- EMS: EN61000‑4‑2 (ESD), EN61000‑4‑3 (RS), EN61000‑4‑4 (EFT), EN61000‑4‑5 (Surge), EN61000‑4‑6 (CS), EN61000‑4‑8, EN61000‑4‑11.
- Safety: EN60950‑1.
- Vibration/Shock/Free Fall: IEC 60068‑2‑6/‑27/‑32.

These certifications ensure the switch’s resilience to electromagnetic interference, vibration, and temperature extremes, making it suitable for deployment in substations, trains, and other demanding industrial environments.

---

### 9. Additional Information

Warranty: 5 Years (standard ORing industrial warranty)
Manufacturer Support:
- Website: [www.oring-networking.com](https://www.oring-networking.com)
- Email: support@oring-networking.com
- Phone: +886‑2‑2218‑1066
- Fax: +886‑2‑2218‑1014

Maintenance & Updates:
- Firmware updates available via web interface or ORing Open‑Vision software.
- Configuration backup and restore supported.
- Periodic inspection recommended for power connections and grounding integrity.

Safety Considerations:
- Ensure adequate airflow and ambient temperature within specified limits.
- Avoid mechanical stress or uneven loading during installation.
- Proper grounding required to minimize EMI.
- Observe polarity when wiring power inputs to prevent damage.

Operational Indicators:
- PWR (Green): Power on
- PWR1/PWR2 (Green): Individual power module active
- R.M (Green): Ring Master mode active
- Ring (Green/Blinking): Ring mode active / Ring broken
- Fault (Amber): System fault detected
- LNK/ACT (Green/Amber): Link and activity indicators for each port

Relay Output Behavior:
- Configurable for Fail‑Open or Fail‑Close operation.
- Rated 1 A @ 24 VDC for external alarm or control circuits.

Software Management Features:
- Web‑based GUI for configuration and monitoring.
- SNMP v1/v2c/v3 for network management integration.
- Syslog and SMTP client for event reporting.
- Modbus TCP for industrial automation integration.

Reset & Recovery:
- Hardware reset button for reboot or factory default restoration.
- Supports configuration backup via web interface.

---

### Summary

The ORing IGS‑P9164FX‑SS‑SC‑LV is a robust, high‑performance managed industrial Ethernet switch engineered for environments demanding exceptional reliability, electromagnetic immunity, and extended temperature operation. With 16 Gigabit copper ports and 4 single‑mode fiber ports, it provides flexible connectivity for both local and long‑distance network segments.

Its compliance with IEC 61850‑3, IEEE 1613, and EN50155 ensures suitability for power substation automation, smart grid infrastructure, and railway communication systems. The switch’s dual redundant power inputs, O‑Ring fast recovery technology, and comprehensive management suite make it ideal for mission‑critical applications requiring continuous uptime and secure, deterministic network performance.

With a 5‑year warranty, IP‑30 metal housing, and broad environmental tolerance, the IGS‑P9164FX‑SS‑SC‑LV exemplifies ORing’s commitment to industrial‑grade networking reliability and long‑term operational stability.