Comprehensive Product Summary – ORing IGS-P9164GF-SS-SC-LV Industrial Managed Ethernet Switch

---

### 1. Product Overview

Product Name: IGS-P9164GF-SS-SC-LV
Model: IGS-P9164GF-SS-SC-LV
Series: IGS-P9164 Series
Article Number: IGS-P9164GF-SS-SC-LV
Manufacturer: ORing Industrial Networking Corp.
Manufacturer Contact:
- Website: [www.oring-networking.com](http://www.oring-networking.com)
- Tel: +886-2-2218-1066
- Fax: +886-2-2218-1014
- Email: support@oring-networking.com

Product Type: Industrial Managed Ethernet Switch
Description: 20-port managed industrial Ethernet switch featuring 16×10/100/1000Base‑T(X) RJ‑45 ports and 4×1000Base‑FX single‑mode SC fiber ports. Designed for mission‑critical applications in power substations, smart grids, and railway systems, compliant with IEC 61850‑3 and EN50155 standards.

---

### 2. Key Features

- High‑Performance Industrial Networking:
20‑port managed Gigabit Ethernet switch with 16 copper and 4 fiber ports, supporting 10/100/1000Base‑T(X) and 1000Base‑FX interfaces.

- Rugged Industrial Design:
IP‑30 rated metal enclosure, fanless operation, and extended operating temperature range from –40 °C to +70 °C, suitable for harsh environments such as rolling stock and substations.

- Redundant Power Inputs:
Dual DC power inputs (12–48 VDC) for the LV model, providing redundancy and protection against power failure.

- Advanced Network Redundancy:
Supports ORing’s proprietary O‑Ring, Open‑Ring, O‑Chain, MRP, and MSTP (RSTP/STP compatible) redundancy protocols with recovery time < 30 ms over 250 connected units.

- Comprehensive Management:
Managed via Web GUI, Telnet, Console (RS‑232), SNMP, or ORing Open‑Vision centralized management software.

- Enhanced Security:
Includes 802.1x authentication, SNMPv3 encrypted access, HTTPS/SSH secure management, MAC‑based port security, and RADIUS centralized password management.

- Smart Grid and Railway Compliance:
Fully compliant with IEC 61850‑3, IEEE 1613, and EN50155 standards for electromagnetic compatibility, vibration, and shock resistance.

- High Reliability:
Redundant power design, relay output for fault alarm, and robust EMI/EMS protection ensure continuous operation in critical infrastructure.

- Flexible Mounting Options:
Supports both DIN‑rail and wall‑mount installation with included hardware kits.

---

### 3. Technical Specifications

Physical Characteristics:
- Dimensions (W × D × H): 115 × 159 × 154 mm (4.52 × 6.26 × 6.06 in)
- Weight: 1,780 g (LV model)
- Enclosure: IP‑30 rated metal housing
- Cooling: Fanless design

Ports:
- 16 × 10/100/1000Base‑T(X) RJ‑45 ports (Auto MDI/MDIX)
- 4 × 1000Base‑FX single‑mode SC fiber ports

Fiber Optic Specifications (Single‑Mode SC):
- Wavelength: 1310 nm
- Typical Distance: 10 km
- Max. Output Optical Power: –3 dBm
- Min. Output Optical Power: –9.5 dBm
- Receiver Sensitivity: –20 dBm
- Saturation: 0 dBm
- Link Budget: 10.5 dB

Performance:
- Switching Bandwidth: 40 Gbps
- Switch Latency: 7 µs
- MAC Table: 8 K entries
- Packet Buffer: 4 Mbits
- Priority Queues: 8
- Max. VLANs: 256
- IGMP Multicast Groups: 128 per VLAN
- Jumbo Frame Support: Up to 9.6 KB
- Processing Type: Store‑and‑Forward

Power:
- Input Voltage (LV model): Dual 12–48 VDC
- Power Consumption (Typical): 18–21 W
- Protection: Reverse polarity and overload current protection
- Redundancy: Dual power inputs (PWR1, PWR2)
- Relay Output: 1 A @ 24 VDC (3‑pin terminal block)

Environmental:
- Operating Temperature: –40 °C to +75 °C
- Storage Temperature: –40 °C to +85 °C
- Operating Humidity: 5 % – 95 % (non‑condensing)

---

### 4. Functionality

Operation and Management:
The IGS‑P9164GF‑SS‑SC‑LV operates as a fully managed Layer 2 switch, providing advanced configuration and monitoring capabilities. Users can access the device through:
- Web Browser (HTTP/HTTPS)
- Telnet or SSH
- RS‑232 Console Port (RJ‑45 to DB‑9 cable included)
- SNMP v1/v2c/v3
- ORing Open‑Vision centralized management software

Default Network Settings:
- Default IP Address: 192.168.10.1
- Default Username/Password: admin / admin

Use Cases and Applications:
- Power substations and smart grid automation (IEC 61850‑3 compliant)
- Railway and rolling stock communication systems (EN50155 compliant)
- Industrial automation and process control networks
- Transportation and traffic control systems
- Oil, gas, and mining network infrastructure

Compatibility:
Supports standard Ethernet protocols and interoperates with third‑party network devices such as routers, servers, and other managed switches.

---

### 5. Components & Accessories

Package Contents:
- 1 × IGS‑P9164GF‑SS‑SC‑LV switch
- 1 × DIN‑rail mounting kit
- 1 × Wall‑mount kit (with screws)
- 1 × Console cable (RJ‑45 to DB‑9)
- 1 × Quick Installation Guide (QIG)
- 1 × CD (documentation and management software)

Optional Accessories:
- Power cables (for HV models)
- Fiber patch cords (SC single‑mode)
- ORing Open‑Vision network management software license

Connectors:
- Power Inputs: Dual 2‑pin terminal blocks (V+, V–)
- Relay Output: 3‑pin terminal block (COM, Fail Open, Fail Close)
- Console Port: RJ‑45 (RS‑232, 115200 bps, 8N1)
- Ethernet Ports: RJ‑45 (Auto MDI/MDIX)
- Fiber Ports: SC single‑mode connectors

---

### 6. Installation & Setup

Mounting Options:
- DIN‑Rail Installation:
1. Attach the DIN‑rail kit to the back panel using the provided screws.
2. Slide the switch onto the DIN‑rail until it clicks securely.

- Wall‑Mount Installation:
1. Attach wall‑mount brackets to both sides of the rear panel using six screws.
2. Mark and drill holes on the wall according to bracket positions.
3. Insert screws through the keyhole slots and slide the switch downward to lock.

Power Wiring:
1. Insert positive and negative wires into V+/V– terminals for PWR1 and PWR2.
2. Tighten terminal screws to secure the connection.
3. Connect relay output terminals (COM, Fail Open, Fail Close) as required for alarm signaling.

Grounding:
Connect the chassis ground screw to an appropriate earth ground to minimize EMI.

Network Cabling:
- 10BASE‑T: Cat 3/4/5 UTP, 100 m max
- 100BASE‑TX: Cat 5 UTP, 100 m max
- 1000BASE‑T: Cat 5e UTP, 100 m max

LED Indicators:
- PWR: Green – Power ON
- PWR1/PWR2: Green – Individual power module active
- R.M: Green – Ring Master mode active
- Ring: Green – Ring mode active; Blinking – Ring broken
- Fault: Amber – System fault detected
- LNK/ACT: Green/Amber – Link/activity status per port

Reset Function:
- Reboot: Press reset button for 5 seconds.
- Factory Reset: Press and hold reset for 5 seconds during power‑on.

---

### 7. Performance & Capabilities

Switching Performance:
- Bandwidth: 40 Gbps non‑blocking
- Latency: 7 µs
- Throughput: Wire‑speed forwarding on all ports
- Packet Buffer: 4 Mbits
- MAC Table: 8 K entries

Network Redundancy:
- O‑Ring: < 30 ms recovery over 250 nodes
- Open‑Ring: Interoperable with third‑party rings
- O‑Chain: Chain topology redundancy
- MRP (Media Redundancy Protocol)
- MSTP/RSTP/STP: IEEE 802.1D/w/s compliant

Quality of Service (QoS):
- IEEE 802.1p priority queues (8 levels)
- TOS/DiffServ support
- Application‑based QoS management
- IP‑based bandwidth control

Security & Access Control:
- IEEE 802.1x port‑based authentication
- MAC‑based port security
- SNMPv3 encrypted management
- HTTPS/SSH secure sessions
- RADIUS centralized authentication
- Device binding and DoS/DDoS auto‑prevention

VLAN & Multicast:
- IEEE 802.1Q VLAN tagging (up to 256 VLANs)
- GVRP dynamic VLAN registration
- IGMP Snooping (128 groups per VLAN)

Management & Monitoring:
- Web GUI, Telnet, Console, SNMP, and Open‑Vision
- DHCP Server/Client
- SMTP Client for event notification
- Modbus TCP support
- Port statistics, status, and configuration monitoring

Limitations:
- Layer 2 switching only (no Layer 3 routing)
- Fiber port distances limited by optical budget (10 km typical for single‑mode)

---

### 8. Standards & Compliance

Ethernet Standards:
- IEEE 802.3 (10Base‑T)
- IEEE 802.3u (100Base‑TX/FX)
- IEEE 802.3z (1000Base‑X)
- IEEE 802.3ab (1000Base‑T)
- IEEE 802.3ad (LACP)
- IEEE 802.3x (Flow Control)
- IEEE 802.1p (Class of Service)
- IEEE 802.1Q (VLAN Tagging)
- IEEE 802.1w (RSTP)
- IEEE 802.1s (MSTP)
- IEEE 802.1x (Authentication)
- IEEE 802.1AB (LLDP)

Industrial and Environmental Standards:
- IEC 61850‑3 / IEEE 1613: Power automation and substation communication
- EN50155: Railway applications (EN50121‑3‑2, EN55011, EN55012‑4)
- EN60950‑1: Safety standard for IT equipment
- IP‑30: Ingress protection rating

EMI/EMS Compliance:
- EMI: FCC Part 15 Class A, CISPR (EN55022) Class A
- EMS:
- EN61000‑4‑2 (ESD)
- EN61000‑4‑3 (RS)
- EN61000‑4‑4 (EFT)
- EN61000‑4‑5 (Surge)
- EN61000‑4‑6 (CS)
- EN61000‑4‑8 (Magnetic Field)
- EN61000‑4‑11 (Dip/Interruption)

Mechanical & Environmental Tests:
- Vibration: IEC 60068‑2‑6
- Shock: IEC 60068‑2‑27
- Free Fall: IEC 60068‑2‑32

---

### 9. Additional Information

Warranty: 5 years limited manufacturer warranty

Maintenance:
- Periodic inspection of power and grounding connections recommended.
- Firmware updates available via ORing’s website or Open‑Vision software.
- Configuration backup and restore supported through Web GUI.

Support & Documentation:
- Comprehensive user manual and quick installation guide included.
- Technical support available via email and phone.
- Firmware and software utilities downloadable from ORing’s official website.

Safety Considerations:
- Ensure adequate airflow and ambient temperature within specified limits.
- Avoid mechanical stress or uneven loading during installation.
- Verify circuit protection and power supply ratings before connection.

Environmental Responsibility:
- Device and documentation printed on recycled materials.
- RoHS‑compliant manufacturing process.

---

### Summary

The ORing IGS‑P9164GF‑SS‑SC‑LV is a high‑reliability, industrial‑grade managed Ethernet switch engineered for demanding environments such as power substations and railway systems. With 16 Gigabit copper ports and 4 Gigabit single‑mode fiber ports, it delivers robust connectivity, advanced redundancy, and comprehensive management features. Compliance with IEC 61850‑3, IEEE 1613, and EN50155 ensures suitability for mission‑critical applications requiring high electromagnetic immunity and mechanical durability.

Its dual 12–48 VDC power inputs, relay fault output, and fast recovery O‑Ring technology provide exceptional network resilience. The switch supports a wide range of Layer 2 management, QoS, VLAN, and security features, making it ideal for industrial automation, transportation, and energy sector networks.

With a compact IP‑30 metal enclosure, fanless design, and –40 °C to +75 °C operating range, the IGS‑P9164GF‑SS‑SC‑LV ensures long‑term stability and performance in harsh field conditions. Backed by a 5‑year warranty and ORing’s global support, it represents a reliable and future‑proof solution for industrial Ethernet infrastructure.