Below is a high‑detail, comprehensive product summary covering every technical element provided. It is long‑form and optimized for semantic search, technical lookup, and product documentation. Formatting avoids heavy markdown but keeps clear structure with plain text headings and bullet lists.

--------------------------------------------------------------------

1. Product Overview
Product name: ITGMC‑111GP+
Model: ITGMC‑111GP+
Series: ORing Industrial Media Converter Series
Article number: ITGMC‑111GP+
Manufacturer: ORing Industrial Networking Corp.

The ITGMC‑111GP+ is an industrial-grade media converter designed for converting between copper-based 1G/10GBase‑T Ethernet and fiber‑optic 1G/10GBase‑X interfaces through an SFP+ socket. It is built for harsh industrial environments with extended temperature support, redundant power inputs, and rugged metal housing.

--------------------------------------------------------------------

2. Key Features
• Converts 1G/10GBase‑T (RJ‑45) to 1G/10GBase‑X (SFP+)
• Supports both Gigabit and 10‑Gigabit Ethernet speeds
• Auto‑negotiation and Auto MDI/MDIX detection on copper port
• Jumbo frame support up to 10 KB
• Industrial‑grade IP30 metal enclosure
• DIN‑rail and wall‑mount installation options
• Extended operating temperature: -20°C to +60°C
• Dual redundant 12–48 VDC power inputs
• Relay output for event warning and alarm notification
• Supports shielded twisted pair Cat6a or higher for 10GBase‑T
• Designed for multimode and single‑mode SFP fiber modules
• LED indicators for power, link/activity, port speed, and relay status
• Electrical protection including overload and reverse polarity protection

--------------------------------------------------------------------

3. Technical Specifications

Physical characteristics
• Enclosure: IP30 industrial metal housing
• Dimensions: 40 mm (W) x 108 mm (D) x 154 mm (H)
• Dimensions in inches: 1.57 x 4.25 x 6.02 inch
• Weight: 437 g
• Mounting: DIN‑rail kit included, wall‑mount kit included (x2)

Environmental
• Operating temperature: -20°C to 60°C (-4°F to 140°F)
• Storage temperature: -40°C to 85°C (-40°F to 185°F)
• Operating humidity: 5% to 95% non‑condensing

Power
• Input voltage: dual 12–48 VDC, 6‑pin terminal block
• Power consumption (typical): 8.6 W
• Triple‑redundant power design (PW1, PW2, relay)
• Overload current protection: present
• Reverse polarity protection: present

Performance
• Jumbo frame: up to 10 KB
• MTBF: TBD

Regulatory approvals
• EMI: FCC Part 15, CISPR/EN55022 Class A
• EMS: EN61000‑4‑2 ESD, EN61000‑4‑3 RS, EN61000‑4‑4 EFT, EN61000‑4‑5 Surge, EN61000‑4‑6 CS, EN61000‑4‑8, EN61000‑4‑11
• Shock: IEC60068‑2‑27
• Free fall: IEC60068‑2‑32
• Vibration: IEC60068‑2‑6

--------------------------------------------------------------------

4. Functionality

How it works
The ITGMC‑111GP+ converts electrical Ethernet signals on an RJ‑45 1G/10GBase‑T interface to optical Ethernet using an SFP+ 1G/10GBase‑X module. This allows network operators to extend communication distances far beyond the typical 100‑meter limitation of copper cabling by using multimode or single‑mode fiber.

Use cases
• Industrial networks requiring high‑bandwidth fiber backbones
• Factory automation and production line networking
• Outdoor or environmentally harsh applications
• Transport, power utility, security surveillance networks
• Long‑distance fiber uplinks for switches, servers, or routers
• Data center copper‑to‑fiber extension and distribution

Applications
• Converting 10GBase‑T to 10GBase‑X for network expansion
• Using fiber to eliminate electromagnetic interference
• Redundant industrial power network scenarios
• Providing stable backbone links in areas with vibration or mechanical stress

Compatibility
• Accepts industry‑standard 1G or 10G SFP/SFP+ fiber modules
• Supports multimode (850 nm, 0–550 m)
• Supports single‑mode (LC connectors, long‑range options)
• Compatible with Cat3/4/5/5e/6/6a UTP or STP for copper link (10G requires Cat6a or above)

--------------------------------------------------------------------

5. Components and Accessories

Included in package
• ITGMC‑111GP+ media converter (1 unit)
• Quick Installation Guide (1 copy)
• DIN‑rail mounting kit (1 set)
• Wall‑mount kit (2 pieces)

Front panel components
1. Power LED (PW1/PW2)
2. Relay LED
3. DIP switch (relay configuration)
4. RJ‑45 LNK/ACT LED
5. 10GBase‑T RJ‑45 port
6. SFP+ speed LED
7. SFP+ LNK/ACT LED
8. 10GBase‑X SFP+ port

Rear panel components
1. 7‑pin terminal block for power inputs and relay output
2. Grounding point

--------------------------------------------------------------------

6. Installation and Setup

DIN‑rail installation
• Attach the DIN‑rail bracket to the back panel using screws.
• Hook the bracket over the DIN‑rail and press until it snaps securely.

Wall‑mount installation
• Attach two wall‑mount plates to the top and bottom panels using screws.
• Mark wall screw positions using the device as a guide.
• Insert screws into the wall and slide the unit onto keyhole slots; tighten for stability.

Power wiring
• Insert V+ and V‑ wires into appropriate terminals.
• Tighten screws to secure power leads.
• Dual inputs allow redundant power (PW1, PW2).

Network cabling
• Supports 1G/10GBase‑T on RJ‑45 with auto MDI/MDIX.
• Uses Cat3–Cat6a UTP/STP; Cat6a or higher required for 10G.
• SFP+ port accepts 1000Base‑X or 10GBase‑X modules (multimode or single‑mode).

LED reference
• PW1/PW2 (green): power input active
• Relay (amber): ON = closed relay; OFF = open
• RJ‑45 LNK/ACT (green): link established
• SFP LNK/ACT (green): fiber link established
• Speed LED: green = 10G, amber = 1G

--------------------------------------------------------------------

7. Performance and Capabilities

Speed support
• 10GBase-T copper (10 Gbps)
• 1000Base‑T copper (1 Gbps)
• 10GBase‑X SFP+ (10 Gbps fiber)
• 1000Base‑X SFP (1 Gbps fiber)

Capacity and efficiency
• Full 10‑Gigabit throughput for high‑bandwidth networks
• Auto‑negotiation between 1G and 10G modes
• Auto MDI/MDIX eliminates need for crossover cables
• Jumbo frame capability up to 10 KB enhances data efficiency
• Relay output enabling remote alarms or centralized monitoring

Limitations
• 10G operation requires shielded Cat6a or better
• Fiber distance depends on the specific SFP/SFP+ module used
• MTBF not specified (TBD by manufacturer)

--------------------------------------------------------------------

8. Standards and Compliance

Supported Ethernet standards
• IEEE 802.3ae (10Gigabit Ethernet)
• IEEE 802.3an (10GBase‑T)
• IEEE 802.3ab (1000Base‑T)
• IEEE 802.3z (1000Base‑X)

EMI/EMS compliance
• FCC Part 15 Class A
• CISPR/EN55022 Class A
• EN61000‑4‑2 ESD immunity
• EN61000‑4‑3 radiated susceptibility
• EN61000‑4‑4 EFT immunity
• EN61000‑4‑5 surge immunity
• EN61000‑4‑6 conducted susceptibility
• EN61000‑4‑8 magnetic field immunity
• EN61000‑4‑11 voltage dip/interrupt immunity

Environmental and mechanical testing
• Shock: IEC60068‑2‑27
• Vibration: IEC60068‑2‑6
• Free fall: IEC60068‑2‑32

--------------------------------------------------------------------

9. Additional Information

Warranty
• 5‑year warranty provided by ORing Industrial Networking Corp.

Support
• Website: www.oring-networking.com
• Email: support@oring-networking.com
• Telephone: +886‑2‑2218‑1066
• Fax: +886‑2‑2218‑1014

Maintenance
• No moving parts; minimal routine maintenance required
• Ensure airflow is not obstructed
• Use appropriate fiber cleaning tools for SFP connectors
• Check power wiring regularly in industrial environments

Updates
• Firmware or configuration updates may be provided by ORing depending on model revision
• Users should check manufacturer website for product documents, updated quick guides, and support notices

--------------------------------------------------------------------

If you'd like, I can also produce:
• A shorter 1,000‑token version
• A 600‑character catalog summary
• A comparison sheet with similar models
• A JSON or machine‑readable technical spec sheet