Comprehensive Product Summary – SFP1G-LX10 Gigabit Ethernet SFP Optical Transceiver

---

### 1. Product Overview

Product Name: SFP1G-LX10
Model Number: SFP1G-LX10
Series: Gigabit Ethernet SFP Optical Transceiver Series
Article Number: SFP1G-LX10
Manufacturer: ORing Industrial Networking Corp.
Product Type: 1 Gbps Small Form-factor Pluggable (SFP) Optical Transceiver
Transmission Type: Single-mode fiber (SMF)
Transmission Distance: Up to 10 km
Optical Wavelength: 1310 nm
Connector Type: LC Duplex
Operating Temperature Range: 0°C to 70°C (standard model); -40°C to 85°C (industrial model SFP1G-LX10-I)
Website: [www.oring-networking.com](http://www.oring-networking.com)

The ORing SFP1G-LX10 is a high-performance, hot-pluggable optical transceiver designed for Gigabit Ethernet applications over single-mode fiber. It provides a reliable and cost-effective solution for long-distance data transmission up to 10 kilometers, making it ideal for industrial, enterprise, and telecommunications networks.

---

### 2. Key Features

- Gigabit Ethernet Performance: Supports data rates up to 1.25 Gbps for full-duplex Gigabit Ethernet connectivity.
- Long-Distance Transmission: Designed for single-mode fiber (SMF) with a maximum reach of 10 km.
- Optical Wavelength: Operates at 1310 nm, optimized for low-attenuation single-mode fiber links.
- Compact SFP Form Factor: Compliant with SFP Multi-Source Agreement (MSA) standards, ensuring compatibility with a wide range of network devices.
- LC Duplex Connector: Provides secure, low-loss optical connections with standard LC interfaces.
- Hot-Pluggable Design: Enables easy installation and replacement without network downtime.
- Industrial Temperature Option: Available as SFP1G-LX10-I for harsh environments (-40°C to 85°C).
- Low Power Consumption: Energy-efficient design suitable for high-density network deployments.
- Digital Diagnostic Monitoring (DDM): Supports real-time monitoring of transceiver parameters (depending on host device support).
- High Reliability: Engineered for stable operation in mission-critical industrial and enterprise networks.

---

### 3. Technical Specifications

| Parameter | Specification |
|----------------|-------------------|
| Data Rate | 1.25 Gbps (Gigabit Ethernet) |
| Fiber Type | Single-mode fiber (SMF) |
| Transmission Distance | Up to 10 km |
| Wavelength | 1310 nm |
| Connector Type | LC Duplex |
| Optical Output Power (Max TX) | -3 dBm |
| Optical Output Power (Min TX) | -9.5 dBm |
| Receiver Sensitivity (Min Input Power) | -20 dBm |
| Receiver Saturation (Max Input Power) | -3 dBm |
| Link Budget | 10.5 dB |
| Operating Temperature (Standard) | 0°C to 70°C |
| Operating Temperature (Industrial) | -40°C to 85°C |
| Storage Temperature | -40°C to 85°C |
| Power Supply Voltage | 3.3 V DC nominal |
| Power Consumption | < 1 W typical |
| Form Factor | SFP (Small Form-factor Pluggable) |
| Dimensions (Approx.) | 13.4 mm (W) × 56.5 mm (L) × 8.5 mm (H) |
| Weight | Approx. 20 g |
| Compliance | IEEE 802.3z 1000BASE-LX standard |
| Cooling | Passive, convection-cooled |
| Hot-Pluggable | Yes |

---

### 4. Functionality

The SFP1G-LX10 operates as a bidirectional optical transceiver module that converts electrical Gigabit Ethernet signals into optical signals for transmission over single-mode fiber. It uses a 1310 nm laser transmitter and a PIN photodiode receiver to achieve stable, long-distance communication.

Typical Use Cases:
- Gigabit Ethernet backbone links between switches or routers.
- Fiber uplinks in industrial Ethernet networks.
- Long-distance connections between data centers or remote facilities.
- Integration into media converters, managed switches, and industrial routers.
- Applications requiring high reliability and low latency over extended distances.

Compatibility:
- Fully compliant with SFP MSA and IEEE 802.3z 1000BASE-LX standards.
- Compatible with most network equipment supporting SFP slots, including ORing switches, routers, and third-party devices.
- Interoperable with other 1310 nm single-mode SFP modules from compliant vendors.

---

### 5. Components & Accessories

Included Components:
- 1 × SFP1G-LX10 optical transceiver module
- Protective dust caps for LC connectors
- Product documentation and compliance label

Optional Accessories:
- Fiber Patch Cords:
- *FPC-LCLC-SS3M*: LC/LC single-mode fiber patch cord, 9/125 μm, 3 m length.
- *FPC-SCLC-SS3M*: SC/LC single-mode fiber patch cord, 9/125 μm, 3 m length.
- *FPC-SCSC-SS3M*: SC/SC single-mode fiber patch cord, 9/125 μm, 3 m length.
- Fiber Patch Adapters:
- *FCA-SC-SS*: SC/SC single-mode adapter, 9/125 μm.
- DIN-Rail Power Supplies (for associated network devices):
- *DR-4512*: 45W, 12VDC/3.5A
- *DR-4524*: 45W, 24VDC/2A
- *DR-75-24*: 75W, 24VDC/3.2A
- *DR-120-24*: 120W, 24VDC/5A
- Power Adapters:
- *PAA-121000*: 12VDC/1000mA, US plug
- *PAE-121000*: 12VDC/1000mA, EU plug
- *PAX-482500*: 48VDC/2500mA, universal input

These accessories ensure optimal connectivity and power delivery for ORing networking devices that utilize the SFP1G-LX10 module.

---

### 6. Installation & Setup

Installation Requirements:
- Compatible SFP slot on a switch, router, or media converter.
- Single-mode fiber optic cable with LC connectors.
- Clean optical connectors to prevent signal loss.

Installation Steps:
1. Power Off (Optional): Although hot-pluggable, it is recommended to ensure the host device is stable before insertion.
2. Insert Module: Align the SFP1G-LX10 with the SFP port and gently push until it clicks into place.
3. Connect Fiber Cable: Attach the LC duplex fiber cable, ensuring correct polarity (TX to RX).
4. Verify Link: Check the device’s link/activity LEDs to confirm successful connection.
5. Monitor Performance: Use network management software or DDM (if supported) to monitor optical power and link status.

Configuration:
No manual configuration is required; the module is plug-and-play. It automatically negotiates link parameters with the connected device.

Mounting Options:
The SFP1G-LX10 is designed for direct insertion into standard SFP cages on compatible network hardware. No external mounting hardware is required.

---

### 7. Performance & Capabilities

Transmission Performance:
- Speed: 1.25 Gbps full-duplex data rate.
- Distance: Up to 10 km over 9/125 μm single-mode fiber.
- Optical Power Budget: 10.5 dB, ensuring reliable operation across standard fiber links.
- Receiver Sensitivity: -20 dBm minimum input power.
- Saturation Level: -3 dBm maximum input power.

Efficiency & Reliability:
- Low power consumption (<1 W typical) supports high-density deployments.
- Stable operation across standard temperature ranges.
- Industrial-grade variant (SFP1G-LX10-I) ensures performance in extreme environments (-40°C to 85°C).

Limitations:
- Designed for single-mode fiber only; not suitable for multimode fiber without mode conditioning patch cords.
- Maximum reach limited to 10 km; for longer distances, ORing offers models such as SFP1G-LX20, SFP1G-LHX30, or SFP1G-ZX70.
- Optical attenuators may be required for very short-distance connections to prevent receiver saturation.

---

### 8. Standards & Compliance

Industry Standards:
- IEEE 802.3z 1000BASE-LX Gigabit Ethernet standard
- SFP Multi-Source Agreement (MSA) compliant
- RoHS (Restriction of Hazardous Substances) compliant
- CE and FCC Class A certified (depending on host device certification)
- Laser Safety: Class 1 laser product (IEC 60825-1 compliant)

Environmental Compliance:
- Operating Temperature: 0°C to 70°C (standard), -40°C to 85°C (industrial)
- Storage Temperature: -40°C to 85°C
- Humidity: 5% to 95% non-condensing
- Designed for rugged industrial environments with high EMI immunity and vibration resistance when used in ORing industrial switches.

Safety & Reliability:
- Built-in ESD protection for optical and electrical interfaces.
- Meets international safety and electromagnetic compatibility (EMC) standards.
- Designed for long-term reliability in mission-critical applications.

---

### 9. Additional Information

Warranty:
- Standard 2-year limited warranty from ORing Industrial Networking Corp.
- Extended warranty options available for industrial-grade models.

Technical Support:
- Comprehensive technical documentation and datasheets available online.
- Global support network through ORing distributors and service partners.
- Firmware and compatibility updates provided via ORing’s support portal.

Maintenance:
- Periodic cleaning of LC connectors recommended to maintain optimal optical performance.
- Avoid excessive bending or stress on fiber cables.
- Store unused modules in anti-static packaging with dust caps in place.

Product Lifecycle & Updates:
- The SFP1G-LX10 is part of ORing’s long-term supported product line, ensuring availability for industrial and enterprise deployments.
- Backward compatibility with legacy 1000BASE-LX systems ensures seamless integration into existing networks.
- Future-proof design supports migration to higher-speed SFP+ platforms where applicable.

---

### Summary

The ORing SFP1G-LX10 is a robust, high-performance Gigabit Ethernet SFP optical transceiver engineered for reliable long-distance communication over single-mode fiber. Operating at 1310 nm with a reach of 10 km, it provides a cost-effective solution for extending network connectivity between switches, routers, and other fiber-enabled devices.

Its compact SFP form factor, LC duplex interface, and hot-pluggable design make it ideal for flexible network architectures. The module’s compliance with IEEE 802.3z and SFP MSA standards ensures interoperability across a wide range of equipment.

For industrial applications, the SFP1G-LX10-I variant offers extended temperature tolerance (-40°C to 85°C), making it suitable for harsh environments such as transportation, energy, and factory automation networks.

When paired with ORing’s comprehensive range of fiber patch cords, DIN-rail power supplies, and industrial switches, the SFP1G-LX10 delivers a complete, reliable, and scalable fiber networking solution.

---

In summary:
- Model: SFP1G-LX10
- Speed: 1 Gbps
- Fiber Type: Single-mode (9/125 μm)
- Distance: 10 km
- Wavelength: 1310 nm
- Connector: LC Duplex
- Temperature Range: 0~70°C (standard), -40~85°C (industrial)
- Compliance: IEEE 802.3z, SFP MSA, RoHS
- Applications: Industrial Ethernet, data centers, telecom backbones, enterprise networks

The SFP1G-LX10 exemplifies ORing’s commitment to rugged excellence, providing dependable optical connectivity for modern high-speed networks.