LOOKING FOR THE RIGHT
INDUSTRIAL SOLUTION?
Discover embedded, communication and automation solutions tailored to your application.
- Gigabit Ethernet Performance: Supports 1 Gbps full-duplex data transmission compliant with IEEE 802.3z Gigabit Ethernet standards.
- Multi-Mode Fiber Compatibility: Optimized for 50/125 μm and 62.5/125 μm multi-mode optical fibers, enabling flexible deployment in short to medium-distance networks.
- Extended Temperature Range: Industrial-grade design ensures stable operation from -40°C to +85°C, ideal for harsh or outdoor environments.
- LC Duplex Optical Interface: Utilizes a standard LC duplex connector for easy integration with existing fiber infrastructure.
- 1310 nm Wavelength Operation: Uses a 1310 nm laser source for reliable optical transmission with low dispersion and attenuation.
- Hot-Pluggable SFP Form Factor: Enables easy installation and replacement without system downtime, supporting modular network design.
- 2 km Transmission Distance: Provides reliable connectivity up to 2 kilometers over multi-mode fiber, suitable for campus, factory, or building interconnections.
- High Optical Sensitivity: Receiver sensitivity rated at -19 dBm, ensuring robust signal reception even under marginal optical conditions.
- Low Power Consumption: Designed for energy-efficient operation, minimizing heat generation and power draw in dense networking environments.
- Industrial Reliability: Built with ruggedized components and tested for vibration, shock, and temperature extremes.
- Interoperability: Fully compatible with standard SFP slots on Ethernet switches, routers, media converters, and industrial networking devices.
- Multi-Mode Fiber Compatibility: Optimized for 50/125 μm and 62.5/125 μm multi-mode optical fibers, enabling flexible deployment in short to medium-distance networks.
- Extended Temperature Range: Industrial-grade design ensures stable operation from -40°C to +85°C, ideal for harsh or outdoor environments.
- LC Duplex Optical Interface: Utilizes a standard LC duplex connector for easy integration with existing fiber infrastructure.
- 1310 nm Wavelength Operation: Uses a 1310 nm laser source for reliable optical transmission with low dispersion and attenuation.
- Hot-Pluggable SFP Form Factor: Enables easy installation and replacement without system downtime, supporting modular network design.
- 2 km Transmission Distance: Provides reliable connectivity up to 2 kilometers over multi-mode fiber, suitable for campus, factory, or building interconnections.
- High Optical Sensitivity: Receiver sensitivity rated at -19 dBm, ensuring robust signal reception even under marginal optical conditions.
- Low Power Consumption: Designed for energy-efficient operation, minimizing heat generation and power draw in dense networking environments.
- Industrial Reliability: Built with ruggedized components and tested for vibration, shock, and temperature extremes.
- Interoperability: Fully compatible with standard SFP slots on Ethernet switches, routers, media converters, and industrial networking devices.
Comprehensive Product Summary – SFP1G-MLX-I Industrial Gigabit Ethernet SFP Transceiver
### 1. Product Overview
Product Name: SFP1G-MLX-I
Model Number: SFP1G-MLX-I
Series: Gigabit Ethernet SFP Optical Transceiver Series
Article Number: SFP1G-MLX-I
Manufacturer: ORing Industrial Networking Corp.
Product Type: 1 Gbps SFP Optical Transceiver, Multi-mode, LC Duplex Connector, Industrial Temperature Range
The ORing SFP1G-MLX-I is a high-performance, industrial-grade Small Form-factor Pluggable (SFP) optical transceiver designed for Gigabit Ethernet applications. It supports 1000 Mbps data transmission over multi-mode fiber (MMF) with a maximum reach of 2 kilometers at a wavelength of 1310 nm. Engineered for rugged environments, it operates reliably across an extended industrial temperature range of -40°C to +85°C, making it suitable for mission-critical networking in industrial automation, transportation, and outdoor communication systems.
### 2. Key Features
- Gigabit Ethernet Performance: Supports 1 Gbps full-duplex data transmission compliant with IEEE 802.3z Gigabit Ethernet standards.
- Multi-Mode Fiber Compatibility: Optimized for 50/125 μm and 62.5/125 μm multi-mode optical fibers, enabling flexible deployment in short to medium-distance networks.
- Extended Temperature Range: Industrial-grade design ensures stable operation from -40°C to +85°C, ideal for harsh or outdoor environments.
- LC Duplex Optical Interface: Utilizes a standard LC duplex connector for easy integration with existing fiber infrastructure.
- 1310 nm Wavelength Operation: Uses a 1310 nm laser source for reliable optical transmission with low dispersion and attenuation.
- Hot-Pluggable SFP Form Factor: Enables easy installation and replacement without system downtime, supporting modular network design.
- 2 km Transmission Distance: Provides reliable connectivity up to 2 kilometers over multi-mode fiber, suitable for campus, factory, or building interconnections.
- High Optical Sensitivity: Receiver sensitivity rated at -19 dBm, ensuring robust signal reception even under marginal optical conditions.
- Low Power Consumption: Designed for energy-efficient operation, minimizing heat generation and power draw in dense networking environments.
- Industrial Reliability: Built with ruggedized components and tested for vibration, shock, and temperature extremes.
- Interoperability: Fully compatible with standard SFP slots on Ethernet switches, routers, media converters, and industrial networking devices.
### 3. Technical Specifications
| Parameter | Specification |
|----------------|-------------------|
| Data Rate | 1 Gbps (Gigabit Ethernet) |
| Fiber Type | Multi-mode (MMF) |
| Supported Fiber Cores | 50/125 μm and 62.5/125 μm |
| Connector Type | LC Duplex |
| Transmission Distance | Up to 2 km |
| Wavelength | 1310 nm |
| Optical Output Power (Max TX) | -1 dBm (62.5/125 μm), -1 dBm (50/125 μm) |
| Optical Output Power (Min TX) | -9 dBm (62.5/125 μm), -9.5 dBm (50/125 μm) |
| Receiver Sensitivity (Min Input Power) | -19 dBm |
| Receiver Saturation (Max Input Power) | -1 dBm |
| Link Budget | 10 dB |
| Operating Temperature | -40°C to +85°C (Industrial Grade) |
| Storage Temperature | -40°C to +85°C |
| Relative Humidity | 5% to 95% (non-condensing) |
| Form Factor | SFP (Small Form-factor Pluggable) |
| Hot-Pluggable | Yes |
| Compliance | IEEE 802.3z 1000BASE-LX standard |
| Power Supply Voltage | 3.3 V DC nominal |
| Power Consumption | <1 W typical |
| Dimensions | Approx. 56.5 mm (L) × 13.7 mm (W) × 8.5 mm (H) |
| Weight | Approx. 20 g |
| Material | Metal housing with EMI shielding |
| Cooling | Passive, convection-cooled |
### 4. Functionality
The SFP1G-MLX-I functions as a modular optical transceiver that converts electrical Gigabit Ethernet signals into optical signals for transmission over multi-mode fiber. It operates at a wavelength of 1310 nm using a laser diode transmitter and a photodiode receiver. The LC duplex interface allows simultaneous bidirectional communication over two fibers—one for transmitting (TX) and one for receiving (RX).
Typical Use Cases:
- Industrial Ethernet switches and routers requiring fiber uplinks.
- Factory automation networks with extended distances between control cabinets.
- Transportation systems (railway, traffic control) requiring EMI-resistant communication.
- Outdoor or temperature-variable environments such as oil & gas facilities or substations.
- Campus or building backbone connections where copper cabling is impractical.
Compatibility:
- Compatible with standard SFP slots on ORing switches, media converters, and third-party devices supporting 1000BASE-LX SFP modules.
- Works with standard multi-mode fiber patch cords (LC-LC, LC-SC, etc.).
- Interoperable with other 1310 nm multi-mode SFP transceivers.
### 5. Components & Accessories
Included Components:
- 1 × SFP1G-MLX-I transceiver module
- Protective dust caps for LC connectors
- Product documentation or datasheet
Optional Accessories:
- Fiber Patch Cords:
- *FPC-LCLC-MM3M* – LC/LC multi-mode 62.5/125 μm, 3 m length
- *FPC-SCLC-MM3M* – SC/LC multi-mode 62.5/125 μm, 3 m length
- *FPC-SCST-MM3M* – SC/ST multi-mode 62.5/125 μm, 3 m length
- Fiber Patch Adapters:
- *FCA-SC-MM* – SC/SC multi-mode adapter, 62.5/125 μm
- DIN-Rail Power Supplies (for associated devices):
- *DR-4512* (12VDC/3.5A), *DR-4524* (24VDC/2A), *DR-75-24* (24VDC/3.2A), *DR-120-24* (24VDC/5A)
- Power Adapters:
- *PAA-121000* (12VDC/1000mA, US plug), *PAE-121000* (EU plug)
- RF Accessories (for integrated wireless systems):
- *RFA-O7-NM-WG* Omni-directional antenna, 2.4GHz, 7dBi
- *RFB-M2-150* Magnetic antenna base, 1.5m cable
These accessories ensure seamless integration of the SFP1G-MLX-I into broader industrial networking systems.
### 6. Installation & Setup
Installation Requirements:
- Compatible SFP slot on a Gigabit Ethernet device (switch, router, or media converter).
- Multi-mode fiber optic cable with LC connectors.
- Clean optical connectors to prevent signal loss.
Installation Steps:
1. Power off the host device or ensure it supports hot-swapping.
2. Remove the protective dust cap from the SFP port and the transceiver.
3. Insert the SFP1G-MLX-I module into the SFP slot until it clicks securely.
4. Connect the LC duplex fiber cable—TX to RX and RX to TX on the counterpart device.
5. Power on the device (if powered off) and verify link/activity LEDs.
Configuration:
- The module is plug-and-play; no software configuration is required.
- Auto-negotiation and link detection are handled by the host device.
- For short-distance connections (<10 m), an optical attenuator may be required to prevent receiver saturation.
Mounting Options:
- Direct insertion into SFP cages on industrial switches or media converters.
- Can be used in rack-mounted or DIN-rail-mounted networking equipment.
### 7. Performance & Capabilities
Transmission Speed: 1 Gbps full-duplex
Transmission Distance: Up to 2 km over multi-mode fiber
Optical Link Budget: 10 dB
Receiver Sensitivity: -19 dBm minimum
Optical Saturation: -1 dBm maximum
Wavelength: 1310 nm
Supported Fiber Types: 50/125 μm and 62.5/125 μm MMF
Error Rate: <1×10⁻¹² typical
Power Consumption: <1 W typical
Latency: Negligible, dependent on host device
Performance Highlights:
- Stable optical output across full temperature range.
- Low jitter and high signal integrity for Gigabit Ethernet.
- Resistant to electromagnetic interference (EMI) due to optical medium.
- Supports long-term continuous operation in industrial environments.
Limitations:
- Not suitable for single-mode fiber applications (use LX or ZX models instead).
- Maximum reach limited to 2 km; for longer distances, use SFP1G-LX10 or higher models.
- Requires clean fiber connectors to maintain optimal performance.
### 8. Standards & Compliance
Industry Standards:
- IEEE 802.3z 1000BASE-LX Gigabit Ethernet
- SFP Multi-Source Agreement (MSA) compliant
- RoHS (Restriction of Hazardous Substances) compliant
- CE and FCC Class A certified for electromagnetic compatibility
- UL recognized components for safety compliance
Environmental Compliance:
- RoHS Directive 2011/65/EU
- WEEE Directive 2012/19/EU
- REACH Regulation (EC) No 1907/2006
Quality Assurance:
- 100% factory-tested for optical power, wavelength accuracy, and link integrity.
- Burn-in and temperature cycling tests performed for industrial-grade certification.
### 9. Additional Information
Warranty:
- Standard 3-year limited warranty from ORing Industrial Networking Corp.
- Covers manufacturing defects and performance failures under normal use.
Technical Support:
- Comprehensive technical documentation and datasheets available at [www.oring-networking.com](https://www.oring-networking.com).
- Global support network offering pre-sales consultation and post-sales service.
Maintenance:
- Periodic cleaning of LC connectors recommended using fiber cleaning tools.
- Avoid bending fiber cables below minimum bend radius to prevent signal loss.
- Store unused modules in anti-static packaging with dust caps attached.
Firmware/Updates:
- The SFP1G-MLX-I is a hardware-based optical transceiver; no firmware updates are required.
Service Life:
- Designed for long-term operation exceeding 100,000 hours MTBF (Mean Time Between Failures).
Environmental Durability:
- Resistant to vibration, shock, and temperature fluctuations typical of industrial environments.
- Suitable for deployment in outdoor cabinets, transportation systems, and manufacturing plants.
### Summary
The ORing SFP1G-MLX-I is a robust, industrial-grade Gigabit Ethernet SFP transceiver optimized for multi-mode fiber networks up to 2 km. Operating at 1310 nm, it delivers reliable 1 Gbps connectivity with low power consumption and high optical performance. Its extended temperature range (-40°C to +85°C) and compliance with IEEE and MSA standards make it ideal for demanding industrial and outdoor applications. With plug-and-play installation, LC duplex interface, and compatibility with a wide range of ORing and third-party networking devices, the SFP1G-MLX-I provides a dependable and flexible solution for high-speed fiber communication in rugged environments.
Manufacturer Contact:
ORing Industrial Networking Corp.
Website: [www.oring-networking.com](https://www.oring-networking.com)
Product Line: Industrial Ethernet & Fiber Optic Solutions
Tagline: *Designed for Rugged Excellence*
### 1. Product Overview
Product Name: SFP1G-MLX-I
Model Number: SFP1G-MLX-I
Series: Gigabit Ethernet SFP Optical Transceiver Series
Article Number: SFP1G-MLX-I
Manufacturer: ORing Industrial Networking Corp.
Product Type: 1 Gbps SFP Optical Transceiver, Multi-mode, LC Duplex Connector, Industrial Temperature Range
The ORing SFP1G-MLX-I is a high-performance, industrial-grade Small Form-factor Pluggable (SFP) optical transceiver designed for Gigabit Ethernet applications. It supports 1000 Mbps data transmission over multi-mode fiber (MMF) with a maximum reach of 2 kilometers at a wavelength of 1310 nm. Engineered for rugged environments, it operates reliably across an extended industrial temperature range of -40°C to +85°C, making it suitable for mission-critical networking in industrial automation, transportation, and outdoor communication systems.
### 2. Key Features
- Gigabit Ethernet Performance: Supports 1 Gbps full-duplex data transmission compliant with IEEE 802.3z Gigabit Ethernet standards.
- Multi-Mode Fiber Compatibility: Optimized for 50/125 μm and 62.5/125 μm multi-mode optical fibers, enabling flexible deployment in short to medium-distance networks.
- Extended Temperature Range: Industrial-grade design ensures stable operation from -40°C to +85°C, ideal for harsh or outdoor environments.
- LC Duplex Optical Interface: Utilizes a standard LC duplex connector for easy integration with existing fiber infrastructure.
- 1310 nm Wavelength Operation: Uses a 1310 nm laser source for reliable optical transmission with low dispersion and attenuation.
- Hot-Pluggable SFP Form Factor: Enables easy installation and replacement without system downtime, supporting modular network design.
- 2 km Transmission Distance: Provides reliable connectivity up to 2 kilometers over multi-mode fiber, suitable for campus, factory, or building interconnections.
- High Optical Sensitivity: Receiver sensitivity rated at -19 dBm, ensuring robust signal reception even under marginal optical conditions.
- Low Power Consumption: Designed for energy-efficient operation, minimizing heat generation and power draw in dense networking environments.
- Industrial Reliability: Built with ruggedized components and tested for vibration, shock, and temperature extremes.
- Interoperability: Fully compatible with standard SFP slots on Ethernet switches, routers, media converters, and industrial networking devices.
### 3. Technical Specifications
| Parameter | Specification |
|----------------|-------------------|
| Data Rate | 1 Gbps (Gigabit Ethernet) |
| Fiber Type | Multi-mode (MMF) |
| Supported Fiber Cores | 50/125 μm and 62.5/125 μm |
| Connector Type | LC Duplex |
| Transmission Distance | Up to 2 km |
| Wavelength | 1310 nm |
| Optical Output Power (Max TX) | -1 dBm (62.5/125 μm), -1 dBm (50/125 μm) |
| Optical Output Power (Min TX) | -9 dBm (62.5/125 μm), -9.5 dBm (50/125 μm) |
| Receiver Sensitivity (Min Input Power) | -19 dBm |
| Receiver Saturation (Max Input Power) | -1 dBm |
| Link Budget | 10 dB |
| Operating Temperature | -40°C to +85°C (Industrial Grade) |
| Storage Temperature | -40°C to +85°C |
| Relative Humidity | 5% to 95% (non-condensing) |
| Form Factor | SFP (Small Form-factor Pluggable) |
| Hot-Pluggable | Yes |
| Compliance | IEEE 802.3z 1000BASE-LX standard |
| Power Supply Voltage | 3.3 V DC nominal |
| Power Consumption | <1 W typical |
| Dimensions | Approx. 56.5 mm (L) × 13.7 mm (W) × 8.5 mm (H) |
| Weight | Approx. 20 g |
| Material | Metal housing with EMI shielding |
| Cooling | Passive, convection-cooled |
### 4. Functionality
The SFP1G-MLX-I functions as a modular optical transceiver that converts electrical Gigabit Ethernet signals into optical signals for transmission over multi-mode fiber. It operates at a wavelength of 1310 nm using a laser diode transmitter and a photodiode receiver. The LC duplex interface allows simultaneous bidirectional communication over two fibers—one for transmitting (TX) and one for receiving (RX).
Typical Use Cases:
- Industrial Ethernet switches and routers requiring fiber uplinks.
- Factory automation networks with extended distances between control cabinets.
- Transportation systems (railway, traffic control) requiring EMI-resistant communication.
- Outdoor or temperature-variable environments such as oil & gas facilities or substations.
- Campus or building backbone connections where copper cabling is impractical.
Compatibility:
- Compatible with standard SFP slots on ORing switches, media converters, and third-party devices supporting 1000BASE-LX SFP modules.
- Works with standard multi-mode fiber patch cords (LC-LC, LC-SC, etc.).
- Interoperable with other 1310 nm multi-mode SFP transceivers.
### 5. Components & Accessories
Included Components:
- 1 × SFP1G-MLX-I transceiver module
- Protective dust caps for LC connectors
- Product documentation or datasheet
Optional Accessories:
- Fiber Patch Cords:
- *FPC-LCLC-MM3M* – LC/LC multi-mode 62.5/125 μm, 3 m length
- *FPC-SCLC-MM3M* – SC/LC multi-mode 62.5/125 μm, 3 m length
- *FPC-SCST-MM3M* – SC/ST multi-mode 62.5/125 μm, 3 m length
- Fiber Patch Adapters:
- *FCA-SC-MM* – SC/SC multi-mode adapter, 62.5/125 μm
- DIN-Rail Power Supplies (for associated devices):
- *DR-4512* (12VDC/3.5A), *DR-4524* (24VDC/2A), *DR-75-24* (24VDC/3.2A), *DR-120-24* (24VDC/5A)
- Power Adapters:
- *PAA-121000* (12VDC/1000mA, US plug), *PAE-121000* (EU plug)
- RF Accessories (for integrated wireless systems):
- *RFA-O7-NM-WG* Omni-directional antenna, 2.4GHz, 7dBi
- *RFB-M2-150* Magnetic antenna base, 1.5m cable
These accessories ensure seamless integration of the SFP1G-MLX-I into broader industrial networking systems.
### 6. Installation & Setup
Installation Requirements:
- Compatible SFP slot on a Gigabit Ethernet device (switch, router, or media converter).
- Multi-mode fiber optic cable with LC connectors.
- Clean optical connectors to prevent signal loss.
Installation Steps:
1. Power off the host device or ensure it supports hot-swapping.
2. Remove the protective dust cap from the SFP port and the transceiver.
3. Insert the SFP1G-MLX-I module into the SFP slot until it clicks securely.
4. Connect the LC duplex fiber cable—TX to RX and RX to TX on the counterpart device.
5. Power on the device (if powered off) and verify link/activity LEDs.
Configuration:
- The module is plug-and-play; no software configuration is required.
- Auto-negotiation and link detection are handled by the host device.
- For short-distance connections (<10 m), an optical attenuator may be required to prevent receiver saturation.
Mounting Options:
- Direct insertion into SFP cages on industrial switches or media converters.
- Can be used in rack-mounted or DIN-rail-mounted networking equipment.
### 7. Performance & Capabilities
Transmission Speed: 1 Gbps full-duplex
Transmission Distance: Up to 2 km over multi-mode fiber
Optical Link Budget: 10 dB
Receiver Sensitivity: -19 dBm minimum
Optical Saturation: -1 dBm maximum
Wavelength: 1310 nm
Supported Fiber Types: 50/125 μm and 62.5/125 μm MMF
Error Rate: <1×10⁻¹² typical
Power Consumption: <1 W typical
Latency: Negligible, dependent on host device
Performance Highlights:
- Stable optical output across full temperature range.
- Low jitter and high signal integrity for Gigabit Ethernet.
- Resistant to electromagnetic interference (EMI) due to optical medium.
- Supports long-term continuous operation in industrial environments.
Limitations:
- Not suitable for single-mode fiber applications (use LX or ZX models instead).
- Maximum reach limited to 2 km; for longer distances, use SFP1G-LX10 or higher models.
- Requires clean fiber connectors to maintain optimal performance.
### 8. Standards & Compliance
Industry Standards:
- IEEE 802.3z 1000BASE-LX Gigabit Ethernet
- SFP Multi-Source Agreement (MSA) compliant
- RoHS (Restriction of Hazardous Substances) compliant
- CE and FCC Class A certified for electromagnetic compatibility
- UL recognized components for safety compliance
Environmental Compliance:
- RoHS Directive 2011/65/EU
- WEEE Directive 2012/19/EU
- REACH Regulation (EC) No 1907/2006
Quality Assurance:
- 100% factory-tested for optical power, wavelength accuracy, and link integrity.
- Burn-in and temperature cycling tests performed for industrial-grade certification.
### 9. Additional Information
Warranty:
- Standard 3-year limited warranty from ORing Industrial Networking Corp.
- Covers manufacturing defects and performance failures under normal use.
Technical Support:
- Comprehensive technical documentation and datasheets available at [www.oring-networking.com](https://www.oring-networking.com).
- Global support network offering pre-sales consultation and post-sales service.
Maintenance:
- Periodic cleaning of LC connectors recommended using fiber cleaning tools.
- Avoid bending fiber cables below minimum bend radius to prevent signal loss.
- Store unused modules in anti-static packaging with dust caps attached.
Firmware/Updates:
- The SFP1G-MLX-I is a hardware-based optical transceiver; no firmware updates are required.
Service Life:
- Designed for long-term operation exceeding 100,000 hours MTBF (Mean Time Between Failures).
Environmental Durability:
- Resistant to vibration, shock, and temperature fluctuations typical of industrial environments.
- Suitable for deployment in outdoor cabinets, transportation systems, and manufacturing plants.
### Summary
The ORing SFP1G-MLX-I is a robust, industrial-grade Gigabit Ethernet SFP transceiver optimized for multi-mode fiber networks up to 2 km. Operating at 1310 nm, it delivers reliable 1 Gbps connectivity with low power consumption and high optical performance. Its extended temperature range (-40°C to +85°C) and compliance with IEEE and MSA standards make it ideal for demanding industrial and outdoor applications. With plug-and-play installation, LC duplex interface, and compatibility with a wide range of ORing and third-party networking devices, the SFP1G-MLX-I provides a dependable and flexible solution for high-speed fiber communication in rugged environments.
Manufacturer Contact:
ORing Industrial Networking Corp.
Website: [www.oring-networking.com](https://www.oring-networking.com)
Product Line: Industrial Ethernet & Fiber Optic Solutions
Tagline: *Designed for Rugged Excellence*
-
Product_Selection_Guide_Accessories.pdf
PDF Catalog
-
Oring-Accessories.pdf
PDF Catalog
No accessories available.