LOOKING FOR THE RIGHT
INDUSTRIAL SOLUTION?
Discover embedded, communication and automation solutions tailored to your application.
- High-Speed Data Transmission: Supports 1 Gbps full-duplex data rate compliant with IEEE 802.3z Gigabit Ethernet standards.
- Long-Distance Communication: Designed for single-mode fiber (SMF) with a maximum transmission distance of 80 km, suitable for metropolitan area networks (MANs), long-haul links, and industrial backbones.
- Optical Wavelength: Operates at 1550 nm, optimized for long-range optical transmission with minimal attenuation.
- Industrial Temperature Range: Operates reliably in extreme environments from -40°C to +85°C, ensuring stable performance in outdoor or factory-floor conditions.
- Hot-Pluggable Design: Allows insertion and removal without powering down the host device, simplifying maintenance and upgrades.
- Compact SFP Form Factor: Standardized SFP footprint compatible with a wide range of network switches, routers, and media converters.
- High Optical Power Budget: 24 dB link budget ensures robust signal integrity over long distances.
- Low Power Consumption: Energy-efficient design suitable for high-density deployments.
- Digital Diagnostic Monitoring (DDM): Supports real-time monitoring of optical parameters such as temperature, supply voltage, transmit (TX) bias current, optical output power, and received optical power (if supported by host).
- Ruggedized Construction: Built for industrial-grade reliability with enhanced mechanical durability and vibration resistance.
- Long-Distance Communication: Designed for single-mode fiber (SMF) with a maximum transmission distance of 80 km, suitable for metropolitan area networks (MANs), long-haul links, and industrial backbones.
- Optical Wavelength: Operates at 1550 nm, optimized for long-range optical transmission with minimal attenuation.
- Industrial Temperature Range: Operates reliably in extreme environments from -40°C to +85°C, ensuring stable performance in outdoor or factory-floor conditions.
- Hot-Pluggable Design: Allows insertion and removal without powering down the host device, simplifying maintenance and upgrades.
- Compact SFP Form Factor: Standardized SFP footprint compatible with a wide range of network switches, routers, and media converters.
- High Optical Power Budget: 24 dB link budget ensures robust signal integrity over long distances.
- Low Power Consumption: Energy-efficient design suitable for high-density deployments.
- Digital Diagnostic Monitoring (DDM): Supports real-time monitoring of optical parameters such as temperature, supply voltage, transmit (TX) bias current, optical output power, and received optical power (if supported by host).
- Ruggedized Construction: Built for industrial-grade reliability with enhanced mechanical durability and vibration resistance.
Comprehensive Product Summary: SFP1G-ZX80-I
### 1. Product Overview
Product Name: SFP1G-ZX80-I
Model Number: SFP1G-ZX80-I
Series: Gigabit Ethernet SFP Optical Transceiver Series
Article Number: SFP1G-ZX80-I
Manufacturer: ORing Industrial Networking Corp.
Product Type: 1 Gbps SFP Optical Transceiver Module
Transmission Type: Single-mode fiber (SMF)
Transmission Distance: Up to 80 km
Wavelength: 1550 nm
Operating Temperature Range: -40°C to +85°C (Industrial Grade)
Connector Type: LC Duplex
Compliance: IEEE 802.3z Gigabit Ethernet standard
The ORing SFP1G-ZX80-I is a high-performance, industrial-grade Small Form-factor Pluggable (SFP) optical transceiver designed for long-distance Gigabit Ethernet communication over single-mode fiber. It supports data rates up to 1 Gbps and provides reliable optical transmission up to 80 kilometers, making it ideal for industrial networking, telecommunications, and backbone infrastructure applications that require extended reach and high environmental resilience.
### 2. Key Features
- High-Speed Data Transmission: Supports 1 Gbps full-duplex data rate compliant with IEEE 802.3z Gigabit Ethernet standards.
- Long-Distance Communication: Designed for single-mode fiber (SMF) with a maximum transmission distance of 80 km, suitable for metropolitan area networks (MANs), long-haul links, and industrial backbones.
- Optical Wavelength: Operates at 1550 nm, optimized for long-range optical transmission with minimal attenuation.
- Industrial Temperature Range: Operates reliably in extreme environments from -40°C to +85°C, ensuring stable performance in outdoor or factory-floor conditions.
- Hot-Pluggable Design: Allows insertion and removal without powering down the host device, simplifying maintenance and upgrades.
- Compact SFP Form Factor: Standardized SFP footprint compatible with a wide range of network switches, routers, and media converters.
- High Optical Power Budget: 24 dB link budget ensures robust signal integrity over long distances.
- Low Power Consumption: Energy-efficient design suitable for high-density deployments.
- Digital Diagnostic Monitoring (DDM): Supports real-time monitoring of optical parameters such as temperature, supply voltage, transmit (TX) bias current, optical output power, and received optical power (if supported by host).
- Ruggedized Construction: Built for industrial-grade reliability with enhanced mechanical durability and vibration resistance.
### 3. Technical Specifications
| Parameter | Specification |
|----------------|------------------|
| Data Rate | 1 Gbps (Gigabit Ethernet) |
| Fiber Type | Single-mode fiber (SMF) |
| Connector Type | LC Duplex |
| Transmission Distance | Up to 80 km |
| Wavelength | 1550 nm |
| Optical Output Power (TX) | Max: +5 dBm / Min: 0 dBm |
| Optical Input Power (RX Sensitivity) | Minimum: -24 dBm |
| Optical Input Power (Saturation) | Maximum: -3 dBm |
| Link Budget | 24 dB |
| Operating Temperature | -40°C to +85°C (Industrial Grade) |
| Storage Temperature | -40°C to +85°C |
| Relative Humidity | 5% to 95% (non-condensing) |
| Power Supply Voltage | 3.3 V DC nominal |
| Power Consumption | <1 W typical |
| Form Factor | SFP (Small Form-factor Pluggable) |
| Dimensions | Approx. 56.5 mm (L) × 13.7 mm (W) × 8.5 mm (H) |
| Weight | Approx. 20 g |
| Material | Metal housing with EMI shielding |
| Cooling | Passive (no fan required) |
### 4. Functionality
The SFP1G-ZX80-I functions as a modular optical transceiver that converts electrical Gigabit Ethernet signals into optical signals for transmission over single-mode fiber. It uses a 1550 nm laser transmitter and a photodiode receiver to enable full-duplex communication between network devices.
Operation Principle:
- The transmitter section converts electrical input signals from the host device into optical signals using a 1550 nm laser diode.
- The receiver section detects incoming optical signals via a photodiode and converts them back into electrical signals for the host device.
- The module interfaces with the host system through a standard SFP electrical connector, supporting hot-swappable operation.
Use Cases and Applications:
- Industrial Ethernet networks requiring long-distance fiber connectivity.
- Metropolitan area networks (MANs) and wide area networks (WANs).
- Backbone links between switches, routers, and media converters.
- Surveillance and transportation systems requiring extended fiber runs.
- Utility and energy sector communication networks.
- Outdoor or harsh-environment installations where temperature extremes are common.
Compatibility:
- Compatible with all standard SFP ports supporting 1 Gbps data rate.
- Interoperable with other 1550 nm single-mode SFP modules (e.g., SFP1G-ZX70, SFP1G-XD50).
- Works with ORing industrial Ethernet switches, media converters, and third-party SFP-compliant devices.
### 5. Components & Accessories
Included Components:
- 1 × SFP1G-ZX80-I optical transceiver module
- Protective dust caps for LC connectors
- Product documentation and compliance label
Optional Accessories:
- Fiber Patch Cords:
- *FPC-LCLC-SS3M:* LC/LC single-mode 9/125 μm fiber patch cord, 3 m length.
- *FPC-SCLC-SS3M:* SC/LC single-mode 9/125 μm fiber patch cord, 3 m length.
- *FPC-SCST-SS3M:* SC/ST single-mode 9/125 μm fiber patch cord, 3 m length.
- Fiber Patch Adapters:
- *FCA-SC-SS:* SC/SC single-mode adapter, 9/125 μm.
- DIN-Rail Power Supplies (for host devices):
- *DR-75-24:* 75W DIN-Rail 24VDC/3.2A power supply.
- *DR-120-48:* 120W DIN-Rail 48VDC/2.5A power supply.
- Power Adapters:
- *PAA-121000:* 12VDC/1000mA adapter (US plug).
- *PAE-121000:* 12VDC/1000mA adapter (EU plug).
These accessories ensure optimal connectivity, power reliability, and installation flexibility for industrial networking environments.
### 6. Installation & Setup
Installation Requirements:
- Host device with an available SFP slot supporting 1 Gbps data rate.
- Single-mode fiber optic cable with LC connectors.
- Clean optical connectors to prevent signal loss.
Installation Steps:
1. Ensure the host device is powered on or supports hot-swapping.
2. Remove the protective dust cap from the SFP1G-ZX80-I and the SFP port.
3. Insert the module gently into the SFP slot until it clicks into place.
4. Connect the single-mode fiber cable to the LC duplex interface (TX to RX, RX to TX).
5. Verify link status via the host device’s LED indicators.
Configuration:
- The module is plug-and-play; no software configuration is required.
- If the received optical power exceeds the receiver’s maximum input (-3 dBm), use an optical attenuator to prevent damage.
- Compatible with standard network management interfaces supporting DDM (if available).
Mounting Options:
- Direct insertion into SFP cages on switches, routers, or media converters.
- Can be used in rack-mounted or DIN-rail-mounted industrial devices.
### 7. Performance & Capabilities
Transmission Performance:
- Speed: 1 Gbps full-duplex.
- Distance: Up to 80 km over single-mode fiber (9/125 μm).
- Optical Power Budget: 24 dB, ensuring reliable long-distance communication.
- Wavelength: 1550 nm, optimized for low-loss transmission.
Optical Characteristics:
- TX Output Power: 0 to +5 dBm.
- RX Sensitivity: -24 dBm minimum.
- RX Saturation: -3 dBm maximum.
- Link Budget: 24 dB.
Electrical Characteristics:
- Supply Voltage: 3.3 V DC ±5%.
- Power Consumption: <1 W typical.
Environmental Performance:
- Operating Temperature: -40°C to +85°C.
- Storage Temperature: -40°C to +85°C.
- Humidity: 5%–95% non-condensing.
Reliability:
- Designed for continuous operation in industrial environments.
- Resistant to vibration, shock, and electromagnetic interference (EMI).
- Long mean time between failures (MTBF) due to robust component selection.
Limitations:
- Requires single-mode fiber; not compatible with multi-mode fiber.
- Optical attenuator recommended for short-distance connections to prevent receiver overload.
### 8. Standards & Compliance
Industry Standards:
- IEEE 802.3z Gigabit Ethernet (1000BASE-ZX)
- SFP Multi-Source Agreement (MSA) compliant
- RoHS (Restriction of Hazardous Substances) compliant
- CE and FCC Class A certified for electromagnetic compatibility
- Laser Safety: Class 1 laser product (IEC 60825-1)
Environmental & Safety Compliance:
- Fully compliant with industrial-grade environmental standards.
- Meets extended temperature and vibration resistance requirements for industrial networking.
- Manufactured under ISO 9001 quality management system.
Interoperability:
- Compatible with ORing industrial switches, routers, and media converters.
- Interoperable with third-party SFP-compliant devices from major network equipment vendors.
### 9. Additional Information
Warranty:
- Standard 3-year limited warranty covering manufacturing defects and performance reliability under normal operating conditions.
Technical Support:
- ORing provides comprehensive technical support, including installation guidance, troubleshooting, and firmware compatibility assistance.
- Online resources available at [www.oring-networking.com](http://www.oring-networking.com).
Maintenance:
- Periodic cleaning of LC connectors recommended to maintain optimal optical performance.
- Inspect fiber cables for bends or damage that may affect signal quality.
- Replace dust caps when the module is not in use to prevent contamination.
Firmware & Updates:
- The SFP1G-ZX80-I is a hardware-based optical transceiver and does not require firmware updates.
- Host devices may receive firmware updates to enhance DDM monitoring or compatibility.
Service Life:
- Designed for long-term operation exceeding 100,000 hours MTBF under industrial conditions.
Packaging:
- Individually packaged in anti-static, shock-resistant enclosures.
- Includes labeling with model number, wavelength, and serial identification for traceability.
### Summary
The ORing SFP1G-ZX80-I is a robust, industrial-grade Gigabit Ethernet SFP optical transceiver engineered for long-distance single-mode fiber communication up to 80 km. Operating at a wavelength of 1550 nm, it delivers high optical power and superior signal integrity across extended fiber links. Its wide operating temperature range (-40°C to +85°C) and compliance with IEEE 802.3z and SFP MSA standards make it ideal for demanding industrial, transportation, and telecommunication environments.
With its hot-pluggable design, low power consumption, and compatibility with a wide range of network equipment, the SFP1G-ZX80-I provides a reliable, scalable, and cost-effective solution for extending Gigabit Ethernet networks over long distances while maintaining industrial-grade durability and performance.
### 1. Product Overview
Product Name: SFP1G-ZX80-I
Model Number: SFP1G-ZX80-I
Series: Gigabit Ethernet SFP Optical Transceiver Series
Article Number: SFP1G-ZX80-I
Manufacturer: ORing Industrial Networking Corp.
Product Type: 1 Gbps SFP Optical Transceiver Module
Transmission Type: Single-mode fiber (SMF)
Transmission Distance: Up to 80 km
Wavelength: 1550 nm
Operating Temperature Range: -40°C to +85°C (Industrial Grade)
Connector Type: LC Duplex
Compliance: IEEE 802.3z Gigabit Ethernet standard
The ORing SFP1G-ZX80-I is a high-performance, industrial-grade Small Form-factor Pluggable (SFP) optical transceiver designed for long-distance Gigabit Ethernet communication over single-mode fiber. It supports data rates up to 1 Gbps and provides reliable optical transmission up to 80 kilometers, making it ideal for industrial networking, telecommunications, and backbone infrastructure applications that require extended reach and high environmental resilience.
### 2. Key Features
- High-Speed Data Transmission: Supports 1 Gbps full-duplex data rate compliant with IEEE 802.3z Gigabit Ethernet standards.
- Long-Distance Communication: Designed for single-mode fiber (SMF) with a maximum transmission distance of 80 km, suitable for metropolitan area networks (MANs), long-haul links, and industrial backbones.
- Optical Wavelength: Operates at 1550 nm, optimized for long-range optical transmission with minimal attenuation.
- Industrial Temperature Range: Operates reliably in extreme environments from -40°C to +85°C, ensuring stable performance in outdoor or factory-floor conditions.
- Hot-Pluggable Design: Allows insertion and removal without powering down the host device, simplifying maintenance and upgrades.
- Compact SFP Form Factor: Standardized SFP footprint compatible with a wide range of network switches, routers, and media converters.
- High Optical Power Budget: 24 dB link budget ensures robust signal integrity over long distances.
- Low Power Consumption: Energy-efficient design suitable for high-density deployments.
- Digital Diagnostic Monitoring (DDM): Supports real-time monitoring of optical parameters such as temperature, supply voltage, transmit (TX) bias current, optical output power, and received optical power (if supported by host).
- Ruggedized Construction: Built for industrial-grade reliability with enhanced mechanical durability and vibration resistance.
### 3. Technical Specifications
| Parameter | Specification |
|----------------|------------------|
| Data Rate | 1 Gbps (Gigabit Ethernet) |
| Fiber Type | Single-mode fiber (SMF) |
| Connector Type | LC Duplex |
| Transmission Distance | Up to 80 km |
| Wavelength | 1550 nm |
| Optical Output Power (TX) | Max: +5 dBm / Min: 0 dBm |
| Optical Input Power (RX Sensitivity) | Minimum: -24 dBm |
| Optical Input Power (Saturation) | Maximum: -3 dBm |
| Link Budget | 24 dB |
| Operating Temperature | -40°C to +85°C (Industrial Grade) |
| Storage Temperature | -40°C to +85°C |
| Relative Humidity | 5% to 95% (non-condensing) |
| Power Supply Voltage | 3.3 V DC nominal |
| Power Consumption | <1 W typical |
| Form Factor | SFP (Small Form-factor Pluggable) |
| Dimensions | Approx. 56.5 mm (L) × 13.7 mm (W) × 8.5 mm (H) |
| Weight | Approx. 20 g |
| Material | Metal housing with EMI shielding |
| Cooling | Passive (no fan required) |
### 4. Functionality
The SFP1G-ZX80-I functions as a modular optical transceiver that converts electrical Gigabit Ethernet signals into optical signals for transmission over single-mode fiber. It uses a 1550 nm laser transmitter and a photodiode receiver to enable full-duplex communication between network devices.
Operation Principle:
- The transmitter section converts electrical input signals from the host device into optical signals using a 1550 nm laser diode.
- The receiver section detects incoming optical signals via a photodiode and converts them back into electrical signals for the host device.
- The module interfaces with the host system through a standard SFP electrical connector, supporting hot-swappable operation.
Use Cases and Applications:
- Industrial Ethernet networks requiring long-distance fiber connectivity.
- Metropolitan area networks (MANs) and wide area networks (WANs).
- Backbone links between switches, routers, and media converters.
- Surveillance and transportation systems requiring extended fiber runs.
- Utility and energy sector communication networks.
- Outdoor or harsh-environment installations where temperature extremes are common.
Compatibility:
- Compatible with all standard SFP ports supporting 1 Gbps data rate.
- Interoperable with other 1550 nm single-mode SFP modules (e.g., SFP1G-ZX70, SFP1G-XD50).
- Works with ORing industrial Ethernet switches, media converters, and third-party SFP-compliant devices.
### 5. Components & Accessories
Included Components:
- 1 × SFP1G-ZX80-I optical transceiver module
- Protective dust caps for LC connectors
- Product documentation and compliance label
Optional Accessories:
- Fiber Patch Cords:
- *FPC-LCLC-SS3M:* LC/LC single-mode 9/125 μm fiber patch cord, 3 m length.
- *FPC-SCLC-SS3M:* SC/LC single-mode 9/125 μm fiber patch cord, 3 m length.
- *FPC-SCST-SS3M:* SC/ST single-mode 9/125 μm fiber patch cord, 3 m length.
- Fiber Patch Adapters:
- *FCA-SC-SS:* SC/SC single-mode adapter, 9/125 μm.
- DIN-Rail Power Supplies (for host devices):
- *DR-75-24:* 75W DIN-Rail 24VDC/3.2A power supply.
- *DR-120-48:* 120W DIN-Rail 48VDC/2.5A power supply.
- Power Adapters:
- *PAA-121000:* 12VDC/1000mA adapter (US plug).
- *PAE-121000:* 12VDC/1000mA adapter (EU plug).
These accessories ensure optimal connectivity, power reliability, and installation flexibility for industrial networking environments.
### 6. Installation & Setup
Installation Requirements:
- Host device with an available SFP slot supporting 1 Gbps data rate.
- Single-mode fiber optic cable with LC connectors.
- Clean optical connectors to prevent signal loss.
Installation Steps:
1. Ensure the host device is powered on or supports hot-swapping.
2. Remove the protective dust cap from the SFP1G-ZX80-I and the SFP port.
3. Insert the module gently into the SFP slot until it clicks into place.
4. Connect the single-mode fiber cable to the LC duplex interface (TX to RX, RX to TX).
5. Verify link status via the host device’s LED indicators.
Configuration:
- The module is plug-and-play; no software configuration is required.
- If the received optical power exceeds the receiver’s maximum input (-3 dBm), use an optical attenuator to prevent damage.
- Compatible with standard network management interfaces supporting DDM (if available).
Mounting Options:
- Direct insertion into SFP cages on switches, routers, or media converters.
- Can be used in rack-mounted or DIN-rail-mounted industrial devices.
### 7. Performance & Capabilities
Transmission Performance:
- Speed: 1 Gbps full-duplex.
- Distance: Up to 80 km over single-mode fiber (9/125 μm).
- Optical Power Budget: 24 dB, ensuring reliable long-distance communication.
- Wavelength: 1550 nm, optimized for low-loss transmission.
Optical Characteristics:
- TX Output Power: 0 to +5 dBm.
- RX Sensitivity: -24 dBm minimum.
- RX Saturation: -3 dBm maximum.
- Link Budget: 24 dB.
Electrical Characteristics:
- Supply Voltage: 3.3 V DC ±5%.
- Power Consumption: <1 W typical.
Environmental Performance:
- Operating Temperature: -40°C to +85°C.
- Storage Temperature: -40°C to +85°C.
- Humidity: 5%–95% non-condensing.
Reliability:
- Designed for continuous operation in industrial environments.
- Resistant to vibration, shock, and electromagnetic interference (EMI).
- Long mean time between failures (MTBF) due to robust component selection.
Limitations:
- Requires single-mode fiber; not compatible with multi-mode fiber.
- Optical attenuator recommended for short-distance connections to prevent receiver overload.
### 8. Standards & Compliance
Industry Standards:
- IEEE 802.3z Gigabit Ethernet (1000BASE-ZX)
- SFP Multi-Source Agreement (MSA) compliant
- RoHS (Restriction of Hazardous Substances) compliant
- CE and FCC Class A certified for electromagnetic compatibility
- Laser Safety: Class 1 laser product (IEC 60825-1)
Environmental & Safety Compliance:
- Fully compliant with industrial-grade environmental standards.
- Meets extended temperature and vibration resistance requirements for industrial networking.
- Manufactured under ISO 9001 quality management system.
Interoperability:
- Compatible with ORing industrial switches, routers, and media converters.
- Interoperable with third-party SFP-compliant devices from major network equipment vendors.
### 9. Additional Information
Warranty:
- Standard 3-year limited warranty covering manufacturing defects and performance reliability under normal operating conditions.
Technical Support:
- ORing provides comprehensive technical support, including installation guidance, troubleshooting, and firmware compatibility assistance.
- Online resources available at [www.oring-networking.com](http://www.oring-networking.com).
Maintenance:
- Periodic cleaning of LC connectors recommended to maintain optimal optical performance.
- Inspect fiber cables for bends or damage that may affect signal quality.
- Replace dust caps when the module is not in use to prevent contamination.
Firmware & Updates:
- The SFP1G-ZX80-I is a hardware-based optical transceiver and does not require firmware updates.
- Host devices may receive firmware updates to enhance DDM monitoring or compatibility.
Service Life:
- Designed for long-term operation exceeding 100,000 hours MTBF under industrial conditions.
Packaging:
- Individually packaged in anti-static, shock-resistant enclosures.
- Includes labeling with model number, wavelength, and serial identification for traceability.
### Summary
The ORing SFP1G-ZX80-I is a robust, industrial-grade Gigabit Ethernet SFP optical transceiver engineered for long-distance single-mode fiber communication up to 80 km. Operating at a wavelength of 1550 nm, it delivers high optical power and superior signal integrity across extended fiber links. Its wide operating temperature range (-40°C to +85°C) and compliance with IEEE 802.3z and SFP MSA standards make it ideal for demanding industrial, transportation, and telecommunication environments.
With its hot-pluggable design, low power consumption, and compatibility with a wide range of network equipment, the SFP1G-ZX80-I provides a reliable, scalable, and cost-effective solution for extending Gigabit Ethernet networks over long distances while maintaining industrial-grade durability and performance.
-
Product_Selection_Guide_Accessories.pdf
PDF Catalog
-
Oring-Accessories.pdf
PDF Catalog
No accessories available.