Comprehensive Product Summary – Neousys TB‑10 Terminal I/O Module for MezIO‑D220/D230

---

### 1. Product Overview

Product Name: TB‑10 Terminal I/O Module
Model: TB‑10
Article Number: TB‑10
Series: MezIO™ Accessory for Nuvo‑5000E/P Series
Manufacturer: Neousys Technology Inc.
Product Type: SCSI‑68 I/O terminal module for MezIO‑D220 and MezIO‑D230 digital I/O expansion modules
Form Factor: Vertical SCSI‑68 (female) connector with Deca MK01 housing and Deca MB362‑508M terminal block (4P & 6P)

The Neousys TB‑10 is a dedicated terminal I/O interface designed to complement the MezIO‑D220 and MezIO‑D230 isolated digital I/O modules used in the Nuvo‑5000E/P rugged fanless embedded controller series. It provides a robust, field‑ready termination point for high‑density digital I/O signals via a vertical SCSI‑68 connector, ensuring reliable connectivity in industrial and embedded automation environments.

---

### 2. Key Features

- Purpose‑Built for MezIO™ Modules: Specifically designed for Neousys MezIO‑D220 (8‑channel isolated DI + 8‑channel isolated DO) and MezIO‑D230 (16‑channel isolated DI + 16‑channel isolated DO) modules.
- High‑Density SCSI‑68 Interface: Employs a vertical 68‑pin SCSI‑II female connector for compact, high‑bandwidth signal interfacing.
- Industrial‑Grade Terminal Blocks: Equipped with Deca MB362‑508M terminal blocks (4‑pin and 6‑pin) for secure field wiring and easy maintenance.
- Rugged Construction: Housed in Deca MK01 industrial enclosure, providing mechanical protection and EMI shielding.
- Optimized for Rugged Embedded Systems: Designed to integrate seamlessly with Neousys’ rugged fanless controllers operating in harsh environments (‑25 °C to 70 °C).
- Ease of Integration: Plug‑and‑play compatibility with MezIO™ interface on Nuvo‑5000E/P series controllers.
- Reliable Signal Integrity: Short signal path and shielded connector design minimize noise and crosstalk for high‑speed digital I/O.
- Serviceability: Modular terminal block design allows quick replacement or re‑termination without disturbing system wiring.

---

### 3. Technical Specifications

| Parameter | Specification |
|----------------|------------------|
| Connector Type | Vertical SCSI‑68 (female) |
| Interface Standard | SCSI‑II 68‑pin, compatible with MezIO™ I/O connector |
| Housing | Deca MK01 industrial enclosure |
| Terminal Block | Deca MB362‑508M (4‑pin and 6‑pin) |
| Supported Modules | MezIO‑D220 (8 DI + 8 DO), MezIO‑D230 (16 DI + 16 DO) |
| Signal Type | Isolated digital input/output |
| Mounting Orientation | Vertical |
| Material | Industrial‑grade thermoplastic housing with nickel‑plated contacts |
| Operating Temperature | Matches host system: ‑25 °C ~ 70 °C |
| Storage Temperature | ‑40 °C ~ 85 °C |
| Humidity | 10 % ~ 90 %, non‑condensing |
| Vibration Resistance | 5 Grms, 5–500 Hz, 3 axes (per IEC 60068‑2‑64) |
| Shock Resistance | 50 Grms, half‑sine 11 ms (per IEC 60068‑2‑27) |
| Dimensions | Compact terminal module form factor (matches MezIO mechanical envelope) |
| Weight | Lightweight accessory (< 0.5 kg typical) |
| Compliance | CE/FCC Class A (when integrated with Nuvo‑5000 system) |

---

### 4. Functionality

The TB‑10 serves as the external termination and wiring interface for Neousys MezIO‑D220 and D230 digital I/O modules. These modules connect internally to the Nuvo‑5000E/P controller via the proprietary MezIO™ interface, which exposes isolated digital input and output channels through a SCSI‑68 connector. The TB‑10 provides the mating connector and terminal block assembly, allowing field wiring of sensors, actuators, and control devices.

Typical Use Cases:
- Industrial automation and machine control
- Digital signal monitoring and relay actuation
- Process control systems requiring isolated I/O
- Data acquisition and test instrumentation
- Transportation and in‑vehicle control (with MezIO‑V20 ignition control)

Compatibility:
- Fully compatible with MezIO‑D220 and MezIO‑D230 modules
- Integrates with Nuvo‑5000E/P, Nuvo‑5000LP, and Nuvo‑5026E series controllers
- Supports Neousys MezIO™ interface standard (FCI BERGSTAK 61082/61083 connector pair)

---

### 5. Components & Accessories

Included Components:
- TB‑10 terminal I/O module assembly
- Vertical SCSI‑68 (female) connector
- Deca MK01 housing
- Deca MB362‑508M terminal blocks (4‑pin × 1, 6‑pin × 1)
- Mounting hardware (screws and standoffs)

Optional Accessories (for host system integration):
- DINRAIL‑O: DIN‑rail mounting kit for Nuvo‑5000 series
- PA‑120W‑OW: 120 W AC/DC power adapter (20 V/6 A, ‑30 °C ~ 70 °C)
- FANKIT‑25: 25 × 25 × 10 mm fan assembly for cassette cooling
- CSM‑PoE354 / CSM‑USB380 / CSM‑NV750 / CSM‑R800: Cassette modules for additional I/O or GPU expansion
- MezIO™ Modules: C180, C181, D220, D230, V20‑EP, U4, G4, G4P

---

### 6. Installation & Setup

Requirements:
- Compatible Neousys controller with MezIO™ interface (e.g., Nuvo‑5000E/P series)
- Corresponding MezIO‑D220 or D230 module installed in the system

Installation Steps:
1. Power off the Nuvo‑5000 controller and disconnect DC input.
2. Mount the MezIO‑D220/D230 module onto the internal MezIO™ connector (FCI 61083‑064402LF plug to 61082‑063402LF receptacle).
3. Expose the SCSI‑68 I/O aperture on the rear panel by removing the pre‑cut plate.
4. Attach the TB‑10 terminal module to the SCSI‑68 connector, ensuring secure mating.
5. Wire external digital I/O signals to the Deca MB362‑508M terminal blocks according to the MezIO module’s pinout.
6. Verify connections and restore system power.

Mounting Options:
- Direct rear‑panel attachment via SCSI‑68 connector
- DIN‑rail or wall‑mount integration when used with Nuvo‑5000 system brackets

Configuration:
- Digital I/O channel configuration is managed through Neousys driver libraries (WDT_DIO) within the host operating system.
- No additional firmware setup is required for the TB‑10 itself.

---

### 7. Performance & Capabilities

- Signal Capacity: Supports full channel count of connected MezIO module (up to 32 isolated channels).
- Electrical Isolation: Matches MezIO‑D220/D230 isolation rating (typically 2.5 kV DC).
- Signal Integrity: Shielded SCSI‑68 interface ensures minimal crosstalk and EMI.
- Mechanical Reliability: Secure locking connector and rugged terminal blocks withstand vibration and shock per IEC 60068 standards.
- Thermal Endurance: Operates reliably across the Nuvo‑5000’s full temperature range (‑25 °C ~ 70 °C).
- Maintenance Efficiency: Modular design allows quick replacement without disturbing system wiring.

Limitations:
- Designed exclusively for Neousys MezIO‑D220/D230; not a generic SCSI‑68 breakout.
- Requires host controller with MezIO™ interface; cannot operate standalone.

---

### 8. Standards & Compliance

- Electrical Safety: Conforms to EN 60950 when integrated with Nuvo‑5000 system.
- EMC Compliance: CE/FCC Class A per EN 55022, EN 55024, EN 55032.
- Environmental Testing:
- Vibration: 5 Grms, 5–500 Hz, 3 axes (IEC 60068‑2‑64)
- Shock: 50 Grms, 11 ms half‑sine (IEC 60068‑2‑27)
- RoHS: Fully compliant with EU RoHS Directive.
- Operating Standards: Designed to meet industrial automation and embedded computing requirements for rugged environments.

---

### 9. Additional Information

Warranty:
Standard Neousys limited hardware warranty (typically 2 years) covering manufacturing defects under normal industrial use.

Technical Support:
- Comprehensive documentation and user manuals available at [www.neousys‑tech.com](https://www.neousys-tech.com).
- Firmware, driver, and BIOS updates for host systems provided through Neousys support portal.
- Engineering assistance for custom MezIO™ module development available under NDA.

Maintenance:
- Periodic inspection of terminal block connections recommended.
- Clean connectors with non‑conductive compressed air; avoid solvents.
- Verify torque on terminal screws to maintain reliable contact.

Software & Driver Integration:
- Utilizes Neousys WDT_DIO driver library for Windows 7/8/10 (32/64‑bit) and Linux distributions (Ubuntu, Debian, Fedora, OpenSUSE).
- API functions include digital input/output control, watchdog timer, and PoE management (for applicable modules).

System Compatibility Summary:
| Host Controller | MezIO Module | Terminal Module |
|----------------------|------------------|---------------------|
| Nuvo‑5000E/P Series | MezIO‑D220 | TB‑10 |
| Nuvo‑5000E/P Series | MezIO‑D230 | TB‑10 |
| Nuvo‑5000LP / 5026E | MezIO‑D220/D230 | TB‑10 |

Lifecycle & Availability:
- Designed for long‑term embedded deployment; components selected from industrial supply chain with extended availability.
- Compatible with Intel® 6th‑Gen Core™ platform lifecycle (2015 – 2021 and beyond).

---

### Summary

The Neousys TB‑10 Terminal I/O Module is a precision‑engineered accessory enabling robust field connectivity for MezIO‑D220 and D230 digital I/O modules within the Nuvo‑5000E/P rugged embedded controller ecosystem. Featuring a vertical SCSI‑68 interface, industrial Deca terminal blocks, and durable MK01 housing, the TB‑10 ensures reliable signal termination and simplified wiring in demanding industrial environments. Its design aligns with Neousys’ philosophy of modular, fanless, and wide‑temperature embedded computing, providing a scalable and serviceable I/O solution for automation, transportation, and data acquisition applications.