- **Programmable Gain Amplification:** Provides software‑selectable gain settings to accommodate a wide range of input signal amplitudes. Typical gain ranges include ×1, ×2, ×5, ×10, ×20, ×50, and ×100, allowing optimization of signal levels for analog‑to‑digital conversion. - **Integrated Multiplexer (MUX):** Incorporates a multi‑channel analog multiplexer (typically 8‑to‑1 or 16‑to‑1 configuration) for sequential channel selection under software or hardware control. Enables multiple sensor inputs to share a single amplifier or ADC input path. - **High Input Impedance:** Ensures minimal loading on connected sensors or transducers, preserving signal integrity and accuracy. - **Low Noise and High Linearity:** Designed with precision operational amplifiers and low‑noise components to maintain high signal‑to‑noise ratio (SNR) and low total harmonic distortion (THD). - **Wide Bandwidth:** Supports high‑frequency analog signals, suitable for dynamic measurement applications. - **Digital Control Interface:** Gain and channel selection controlled via digital interface (e.g., SPI, I²C, or parallel control lines), allowing integration with microcontrollers, FPGAs, or PC‑based DAQ systems. - **Compact PCB Form Factor:** Optimized for integration into modular instrumentation racks, embedded systems, or custom analog front‑end assemblies. - **Power Supply Flexibility:** Operates from standard ±12 V or ±15 V analog supply rails, with optional single‑supply operation depending on configuration. - **Protection and Reliability:** Includes input overvoltage protection, ESD protection diodes, and thermal stability features for reliable operation in industrial environments. - **Calibration and Offset Adjustment:** Onboard trimmers or digital calibration registers allow fine adjustment of offset and gain accuracy.

Manufacturer: Adlink Technology Inc.

Category: OEM Add On Cards

- **High-Speed Sampling:** 100 MS/s maximum sample rate for accurate waveform reproduction. - **High Resolution:** 14-bit vertical resolution for fine amplitude granularity and low distortion. - **Large Memory Depth:** 1 M-point standard waveform memory, expandable to 2 M points. - **Advanced Sequencing:** Supports up to 4096 sequence steps and 128k segment loops for complex waveform generation. - **Multi-Instrument Synchronization:** Enables synchronization of up to six PXI instruments with

Manufacturer: Adlink Technology Inc.

Category: D/A Intelligent PXI/cPCI

- **24-bit Sigma-Delta ADC and DAC:** Ensures high-resolution, low-noise signal conversion for both input and output channels. - **Simultaneous Sampling and Generation:** Two analog input channels and two analog output channels operate concurrently for synchronized measurement and playback. - **High Sampling and Update Rates:** - Analog Input: Up to 432 kS/s per channel - Analog Output: Up to 216 kS/s per channel - **Programmable Input and Output Ranges:** - Input: ±0.316 V, ±1 V, ±3.16 V, ±10 V, ±40 V - Output: ±0.1 V, ±1 V, ±10 V - **AC/DC Coupling:** Software-selectable input coupling for flexible signal conditioning. - **IEPE Sensor Support:** Built-in 4 mA excitation current for integrated electronic piezoelectric sensors (accelerometers, microphones). - **Triggering Flexibility:** Supports software, analog, external digital, PXI Star, and PXI Trigger Bus triggers. - **Synchronization:** Multi-module synchronization via PXI Trigger Bus [0..7] and PXI Star trigger for scalable systems. - **High Dynamic Performance:** - THD+N: -101 dB (typical at ±1 V and ±10 V output ranges) - Crosstalk: < -100 dB between adjacent channels - **Comprehensive Software Support:** Compatible with LabVIEW™, MATLAB®, Visual Studio®, and ADLINK’s DAQPilot and DSA-DASK drivers. - **Ready-to-Use Utility:** ADLINK Dynamic Signal Assistant software for configuration, acquisition, and waveform generation without programming.

Manufacturer: Adlink Technology Inc.

Category: A/D High Resolution PXI

- **6½-Digit Resolution:** Provides high-accuracy measurements with up to 22-bit resolution for precise characterization of analog signals. - **PXI/CompactPCI Form Factor:** Fully compliant with PXI and CompactPCI standards, enabling integration into modular test systems. - **Multifunction Measurement Capability:** Measures DC voltage, AC voltage (true RMS), DC current, AC current, 2-wire and 4-wire resistance, frequency, period, and temperature. - **High Measurement Speed:** Optimized for fast data acquisition and throughput in automated test environments. - **Auto-Range and Auto-Zero Functions:** Automatically selects optimal measurement range and compensates for offset errors to maintain accuracy. - **Programmable Measurement Functions:** Supports programmable integration times, trigger modes, and measurement configurations. - **Built-in Calibration and Self-Test:** Internal calibration routines ensure long-term stability and accuracy. - **Software Integration:** Compatible with industry-standard drivers (IVI, VISA) and supports control via LabVIEW, MATLAB, and other automation platforms. - **Low Noise and High Stability:** Designed with precision analog circuitry and shielding to minimize noise and drift. - **Temperature Measurement Support:** Supports thermocouple and RTD inputs for temperature monitoring applications. - **Remote Sensing:** 4-wire measurement capability eliminates lead resistance errors for low-resistance measurements. - **Trigger and Synchronization:** PXI trigger bus and star trigger support for synchronized multi-instrument operation.

Manufacturer: Adlink Technology Inc.

Category: A/D Intelligent PXI/PXIe/cPCI

- **High-Resolution Measurement:** True 6½-digit resolution for DC and AC voltage, current, and resistance measurements, ensuring laboratory-grade accuracy in a modular format. - **Integrated Source Functionality:** Built-in sourcing capability for voltage or current output, enabling device characterization, component testing, and automated calibration routines. - **LCR Measurement Capability:** Measures inductance, capacitance, and resistance with precision, supporting component analysis and impedance characterization. - **PXI/CompactPCI Compatibility:** Fully compliant with PXI and CompactPCI standards, allowing integration into modular test systems with synchronized triggering and data acquisition. - **Compact Form Factor:** Standard 3U PXI module size (100 mm × 160 mm), optimized for high-density test configurations. - **High Accuracy and Stability:** Low noise floor, high input impedance, and precision reference circuitry ensure stable and repeatable measurements. - **Wide Measurement Range:** Supports a broad range of voltage (µV to hundreds of volts), current (nA to amperes), and resistance (mΩ to MΩ) measurements. - **Programmable Measurement Functions:** Configurable measurement speed, integration time, and filter settings for optimized performance in different test scenarios. - **Remote Control and Automation:** Full software control via PXI backplane interface, compatible with standard test automation environments such as LabVIEW™, MATLAB®, and Python. - **Self-Calibration and Diagnostics:** Internal self-calibration routines maintain accuracy over time and temperature variations. - **Triggering and Synchronization:** PXI trigger bus support for synchronized measurements across multiple modules. - **Safety and Protection:** Overvoltage, overcurrent, and thermal protection circuits safeguard both the instrument and the device under test (DUT).

Manufacturer: Adlink Technology Inc.

Category: A/D Intelligent PXI/PXIe/cPCI

- **6½-Digit Resolution:** Provides high-precision measurement capability suitable for laboratory, production, and automated test environments. - **PXI/CompactPCI Compatibility:** Fully compliant with PXI and CompactPCI standards, enabling integration with modular test systems and synchronization with other PXI instruments. - **Multifunction Measurement Capability:** Supports DC/AC voltage, DC/AC current, resistance, frequency, and capacitance measurements in a single module. - **Frequency Counter Function:** Integrated frequency counter allows accurate measurement of signal frequency, enhancing versatility for mixed-signal testing. - **Capacitance Measurement:** Built-in capacitance measurement function eliminates the need for external LCR meters in many applications. - **Compact Form Factor:** 100 mm × 160 mm board size optimized for PXI slots, conserving rack space while maintaining high performance. - **High Accuracy and Stability:** Designed for precision measurement with low noise, high linearity, and stable long-term performance. - **Fast Measurement Throughput:** Optimized for rapid data acquisition and transfer over the PXI backplane, supporting high-speed automated test sequences. - **Software Integration:** Compatible with standard PXI software frameworks and drivers, including NI LabVIEW™, IVI, and VISA-based control environments. - **Scalable System Integration:** Can be combined with other PXI modules (switches, sources, digitizers) for complete test and measurement systems.

Manufacturer: Adlink Technology Inc.

Category: A/D Intelligent PXI/PXIe/cPCI

- **High Resolution and Accuracy:** True 7½-digit resolution for precise voltage, current, and resistance measurements. - **PXI/CompactPCI Form Factor:** Fully compliant with PXI and CompactPCI standards, enabling seamless integration into modular test systems. - **Enhanced Measurement Performance:** Low noise, high linearity, and stable measurement architecture optimized for long-term accuracy. - **Multifunction Measurement Capability:** Supports DC voltage, AC voltage, DC current, AC current, 2-wire and 4-wire resistance, frequency, and period measurements. - **Auto-Range and Auto-Zero Functions:** Automatically selects optimal measurement range and compensates for offset drift to maintain accuracy. - **High-Speed Data Acquisition:** Optimized for fast measurement throughput in automated test environments. - **Programmable Measurement Settings:** Configurable integration times, trigger modes, and measurement filters for flexible operation. - **Remote Control and Automation:** Fully programmable via PXI backplane interface; compatible with standard PXI software drivers and APIs. - **Compact Design:** 100 mm × 160 mm PXI module footprint, conserving rack space while maintaining high performance. - **Enhanced Thermal Stability:** Internal temperature compensation ensures consistent readings across varying environmental conditions. - **Self-Calibration and Diagnostics:** Built-in self-test and calibration routines for maintaining measurement integrity. - **System Synchronization:** Supports PXI trigger and timing bus for synchronized measurements across multiple instruments.

Manufacturer: Adlink Technology Inc.

Category: A/D Intelligent PXI/PXIe/cPCI

- **7½‑Digit Resolution:** Provides exceptional measurement precision suitable for calibration, component characterization, and high‑accuracy test applications. - **Multifunction Capability:** Combines DMM and LCR meter functions in one PXI module, reducing system complexity and slot usage. - **PXI/cPCI Compatibility:** Fully compliant with PXI and CompactPCI standards, ensuring seamless integration into modular test systems. - **Sourcing and Measurement Integration:** Capable of both sourcing and measuring voltage and current, enabling four‑quadrant operation for device characterization. - **LCR Measurement Functionality:** Measures inductance (L), capacitance (C), and resistance (R) with selectable test frequencies and drive levels. - **Compact Form Factor:** 100 × 160 mm PXI module size, optimized for high‑density test systems. - **High Stability and Accuracy:** Designed for long‑term measurement stability with low noise and drift characteristics. - **Programmable Operation:** Fully programmable through PXI software drivers, supporting automation via standard test development environments (LabVIEW, TestStand, MATLAB, C/C++). - **Wide Measurement Range:** Supports a broad range of DC and AC voltage/current inputs, resistance, and impedance measurements. - **Remote and Local Operation:** Can be controlled via PXI backplane or external software interface for remote test execution. - **Self‑Calibration and Diagnostics:** Built‑in self‑test and calibration routines ensure consistent accuracy and reliability. - **High Input Impedance:** Minimizes loading effects on measured circuits. - **Low Noise Design:** Optimized analog front‑end for precision low‑level signal measurement. - **Safety and Protection:** Overvoltage and overcurrent protection circuits safeguard both the instrument and the device under test (DUT).

Manufacturer: Adlink Technology Inc.

Category: A/D Intelligent PXI/PXIe/cPCI

- **Simultaneous 4-Channel Analog Input:** Four differential analog input channels with simultaneous sampling capability, ensuring phase-coherent data acquisition across all channels. - **High Resolution and Speed:** 16-bit resolution with a maximum sampling rate of 800 kS/s per channel. - **Programmable Input Ranges:** Bipolar ranges: ±10V, ±5V, ±2.5V, ±1.25V Unipolar ranges: 0–10V, 0–5V, 0–2.5V, 0–1.25V - **Auto-Calibration:** Fully automatic calibration for both A/D and D/A circuits, ensuring long-term accuracy and stability. - **Dual 12-bit Analog Outputs:** Two analog output channels with 1 MS/s update rate, ±10V or 0–10V output range, and 1k-sample FIFO per channel. - **Digital I/O:** 24 programmable TTL/CMOS-compatible digital I/O lines (8255A compatible). - **Counters/Timers:** Two 16-bit general-purpose up/down counters with programmable clock and gate sources. - **Triggering Flexibility:** Supports software, external analog, external digital, and SSI (System Synchronization Interface) triggers. Four trigger modes: post-trigger, pre-trigger, delay-trigger, and middle-trigger. - **Bus-Mastering DMA:** High-speed data transfer via PCI bus-mastering DMA with scatter/gather capability for efficient memory usage. - **System Synchronization Interface (SSI):** Enables synchronization of multiple PXI cards for multi-channel, multi-board data acquisition. - **Software Configurable:** Completely jumper-less design with full software configuration for gain, range, and trigger settings. - **Software Support:** Includes drivers and libraries for Windows and Linux, LabVIEW® PnP VIs, and ActiveX controls.

Manufacturer: Adlink Technology Inc.

Category: A/D Intelligent PXI/PXIe/cPCI

- **Simultaneous Sampling:** 16 differential analog input channels with true simultaneous sampling at up to 250 kS/s per channel. - **High Resolution:** 16-bit analog-to-digital conversion using AD7685 ADCs for precise signal representation. - **Programmable Input Range:** Bipolar input ranges of ±10 V and ±2.5 V with programmable gain settings (x1, x4). - **Auto-Calibration:** Fully automated calibration with onboard 5.000 V reference, eliminating manual trim adjustments. - **Flexible Triggering:** Supports software, external digital, PXI Star, and PXI Trigger Bus triggers with multiple trigger modes (pre-, post-, middle-, and delay-trigger). - **Synchronization:** Multi-module synchronization via PXI Trigger Bus and System Synchronization Interface (SSI). - **Digital I/O:** 4-channel TTL/CMOS-compatible digital input/output lines. - **Timer/Counter:** Two 32-bit general-purpose up/down timer/counters with programmable clock and gate sources. - **Memory Buffer:** 8 K-sample (16 KB) onboard FIFO for continuous data streaming. - **PXI Compliance:** Fully compliant with PXI Specification Rev. 2.2, supporting both 3.3 V and 5 V signaling. - **Software Support:** Compatible with ADLINK DAQPilot, D2K-DASK, LabVIEW™, MATLAB®, and DAQBench environments. - **Operating Systems:** Windows 2000/XP/Vista/2003 and Linux (via D2K-DASK/X). - **Form Factor:** Compact 3U PXI module (100 mm x 160 mm).

Manufacturer: Adlink Technology Inc.

Category: A/D Intelligent PXI/PXIe/cPCI

- **High-Resolution Analog Input:** 16-bit resolution with no missing codes, supporting up to 64 single-ended or 32 differential channels. - **Sampling Rate:** Maximum analog input sampling rate of 250 kS/s per channel. - **Analog Input Flexibility:** Bipolar and unipolar input ranges: ±10 V, ±5 V, ±2.5 V, ±1.25 V and 0–10 V, 0–5 V, 0–2.5 V, 0–1.25 V. - **Programmable Gain:** Selectable gains of x1, x2, x4, and x8 for flexible signal conditioning. - **Analog Output:** Two 12-bit D/A channels with ±10 V or 0–10 V output range, 1 MS/s update rate, and 20 V/μs slew rate. - **Digital I/O:** 24-channel TTL-compatible programmable digital I/O (8255 PIO). - **Timer/Counter:** Two 16-bit general-purpose up/down counters with 40 MHz base clock and external clock input up to 10 MHz. - **Triggering Options:** Supports software, external analog, and digital triggers, as well as PXI/SSI bus synchronization triggers. - **Auto Calibration:** Fully automatic self-calibration with onboard 5.000 V reference (±2 ppm/°C). - **FIFO Buffers:** 1 k-sample A/D FIFO and 1 k-sample D/A FIFO for efficient data buffering. - **DMA Support:** Scatter-gather bus-mastering DMA for high-speed data transfer with minimal CPU load. - **Synchronization:** Multi-card synchronization via PXI trigger bus or SSI (System Synchronization Interface). - **Software Support:** Compatible with ADLINK’s D2K-DASK and D2K-DASK/X drivers, supporting Windows and Linux environments. Integrates with LabVIEW®, MATLAB®, C/C++, Visual Basic, and .NET. - **Operating Systems:** Windows 7/8 (x86/x64) and Linux kernel 2.4.x and later.

Manufacturer: Adlink Technology Inc.

Category: A/D Intelligent PXI/PXIe/cPCI

- **High-Speed A/D Conversion:** 14-bit resolution with simultaneous 4-channel sampling at up to **2 MS/s** total throughput. - **Analog Input Flexibility:** - 4 differential analog input channels. - Programmable input ranges: ±10V, ±5V, ±2.5V, ±1.25V (bipolar) and 0–10V, 0–5V, 0–2.5V, 0–1.25V (unipolar). - Programmable gain settings: ×1, ×2, ×4, ×8. - **Analog Output Capability:** - 2 channels, 12-bit resolution, up to **1 MS/s** update rate. - Bipolar (±10V) or unipolar (0–10V) output ranges. - 1 k-sample FIFO per channel (2 k-sample when single channel active). - **Digital I/O:** - 24 programmable TTL/CMOS-compatible digital I/O lines (82C55A compatible). - 8 synchronous digital inputs (SDI) sampled simultaneously with analog inputs (PXI-2010 only). - **Counters/Timers:** - Two 16-bit up/down general-purpose counters/timers. - Programmable clock source (internal/external up to 10 MHz). - **Triggering and Synchronization:** - Supports software, external analog, external digital, and SSI (System Synchronization Interface) triggers. - Four trigger modes: post-trigger, pre-trigger, middle-trigger, and delay-trigger. - Analog trigger with programmable hysteresis and 8-bit resolution. - **Data Transfer:** - Bus-mastering DMA with scatter/gather support for high-speed data throughput. - 16 k-sample A/D FIFO buffer for continuous acquisition. - **Auto-Calibration:** - Fully automatic calibration for both A/D and D/A channels using onboard precision reference. - **Software Configurable:** - Completely jumper-less design; all configurations are software-controlled. - **Software Support:** - Drivers and libraries for Windows and Linux (D2K-DASK, D2K-DASK/X). - LabVIEW® driver (DAQ-LVIEW PnP) and ActiveX controls (D2K-OCX).

Manufacturer: Adlink Technology Inc.

Category: A/D Intelligent PXI/PXIe/cPCI

- **High-Speed Analog Input:** 64 single-ended or 32 differential analog input channels with 12-bit resolution and up to 3 MS/s sampling rate. - **Flexible Input Configuration:** Software-selectable single-ended (SE) or differential (DI) input modes per channel, supporting mixed configurations. - **Programmable Input Ranges:** Bipolar ranges from ±0.05 V to ±10 V and unipolar ranges from 0–0.1 V to 0–10 V. - **Programmable Gain Amplification:** Gain settings of ×1, ×2, ×4, ×5, ×8, ×10, ×20, ×40, ×50, and ×200 for precise signal scaling. - **Analog Output Capability:** Two 12-bit analog output channels with ±10 V or 0–10 V ranges, 1 MS/s update rate, and 1 k-sample FIFO per channel. - **Digital I/O:** 24-channel TTL-compatible programmable digital input/output (8255 PIO). - **Timer/Counter:** Two 16-bit general-purpose up/down counters with 40 MHz internal or 10 MHz external clock support. - **Triggering Options:** Supports software, external analog, and digital triggers, as well as PXI/SSI bus synchronization triggers. - **Auto-Calibration:** Fully automatic calibration with onboard 5.000 V reference (±2 ppm/°C) for long-term stability. - **Data Transfer Efficiency:** Scatter-gather DMA for high-speed, low-latency data transfer between card and host memory. - **Synchronization:** Multi-card synchronization via PXI trigger bus or System Synchronization Interface (SSI). - **Software Support:** Compatible with Windows 7/8 (x86/x64) and Linux; drivers available for LabVIEW®, MATLAB®, C/C++, Visual Basic, and Visual Studio.NET. - **Utility Software:** Includes AD-Logger for data logging and analysis.

Manufacturer: Adlink Technology Inc.

Category: A/D Intelligent PXI/PXIe/cPCI

- **High Channel Density:** 96 single-ended or 48 differential analog input channels, with software-selectable mixed-mode operation. - **High-Speed Sampling:** Maximum sampling rate of **3 MS/s** (single channel), enabling high-speed transient signal capture. - **12-Bit Resolution:** High-precision 12-bit A/D conversion with no missing codes, ensuring accurate signal representation. - **Programmable Gain and Range:** Software-selectable gain settings (×1, ×2, ×4, ×5, ×8, ×10, ×20, ×40, ×50, ×200) and multiple bipolar/unipolar input ranges. - **Auto Calibration:** Fully automatic self-calibration with onboard 5.000 V reference (±2 ppm/°C), ensuring long-term accuracy and stability. - **FIFO Buffer:** 1 k-sample onboard A/D FIFO for efficient data buffering and high-speed acquisition. - **Flexible Triggering:** Supports software, external analog, and digital triggers with multiple trigger modes (pre-, post-, middle-, and delay-trigger). - **Synchronization:** Multi-card synchronization via PXI trigger bus or System Synchronization Interface (SSI) bus. - **Digital I/O:** 24-channel TTL-compatible programmable digital input/output (8255 PIO). - **Scatter-Gather DMA:** High-speed data transfer using bus-mastering DMA with scatter/gather capability for large data sets. - **Software Support:** Compatible with ADLINK’s D2K-DASK driver library, LabVIEW®, MATLAB®, C/C++, Visual Basic, and Visual Studio.NET. - **Operating System Support:** Windows 7/8 (x86/x64) and Linux. - **Plug-and-Play PXI Integration:** Fully compliant with PXI Specification Rev. 2.2 for seamless integration into PXI chassis.

Manufacturer: Adlink Technology Inc.

Category: A/D Intelligent PXI/PXIe/cPCI

- **PXI Bus Interface:** 32-bit PXI/CompactPCI compliant, plug-and-play configuration. - **Analog Inputs:** 4 simultaneous differential analog input channels with 16-bit resolution. - **Sampling Rate:** Up to 250 kS/s per channel. - **Programmable Input Range:** Bipolar (±10V, ±5V, ±2.5V, ±1.25V) and unipolar (0–10V, 0–5V, 0–2.5V, 0–1.25V). - **Auto-Calibration:** Fully automatic calibration for both A/D and D/A channels. - **Analog Output:** Two 12-bit D/A channels with 1 MS/s update rate and ±10V or 0–10V output range. - **Digital I/O:** 24 programmable TTL/CMOS-compatible digital I/O lines (82C55A compatible). - **Counters/Timers:** Two 16-bit up/down general-purpose counters/timers (GPTC) with up to 10 MHz input frequency. - **Triggering:** Supports software, external analog, external digital, and SSI (System Synchronization Interface) triggers. - **FIFO Buffers:** 512-sample A/D FIFO and 1K-sample D/A FIFO per channel. - **Clocking:** Internal 40 MHz or external clock input (1–40 MHz, TTL-compatible). - **DMA Support:** Bus-mastering DMA with scatter/gather capability for high-speed data transfer. - **System Synchronization Interface (SSI):** Enables synchronization of multiple PXI cards. - **Software Support:** Drivers for Windows and Linux, including LabVIEW®, ActiveX, and C/C++ libraries. - **Form Factor:** Standard PXI module (100 × 160 mm).

Manufacturer: Adlink Technology Inc.

Category: A/D Intelligent PXI/PXIe/cPCI

- **PXI Bus Interface:** 32-bit PXI/CompactPCI compliant, plug-and-play configuration. - **Analog Inputs:** 4 differential, simultaneous-sampling channels with 16-bit resolution and up to 500 kS/s sampling rate. - **Analog Outputs:** 2 channels, 12-bit resolution, 1 MS/s update rate, ±10V or 0–10V output range. - **Digital I/O:** 24 programmable TTL/CMOS-compatible lines (8255A compatible). - **Counters/Timers:** Two 16-bit up/down general-purpose counters with multiple modes. - **Triggering:** Supports software, external digital, external analog, and SSI (System Synchronization Interface) triggers. - **Auto-Calibration:** Fully automatic calibration for both A/D and D/A circuits. - **FIFO Buffers:** - A/D: 512 samples total - D/A: 1k samples per channel (2k when one channel active) - **Clocking:** Internal 40 MHz or external clock input (1–40 MHz). - **System Synchronization Interface (SSI):** Enables synchronization across multiple PXI cards. - **Software Support:** Drivers for Windows and Linux, LabVIEW® PnP, ActiveX (D2K-OCX), and DAQBench visualization tools. - **Form Factor:** Standard PXI module (100 × 160 mm). - **Connector:** 68-pin VHDCI (AMP-787254-1) for I/O signals.

Manufacturer: Adlink Technology Inc.

Category: A/D Intelligent PXI/PXIe/cPCI

- **High-Resolution Analog Input:** 16-bit resolution with no missing codes, supporting up to 64 single-ended or 32 differential input channels (software-selectable per channel). - **Sampling Performance:** Maximum sampling rate of **500 kS/s** for single-channel operation, with programmable gain and input range selection. - **Analog Input Ranges:** Bipolar: ±10 V, ±5 V, ±2.5 V, ±1.25 V Unipolar: 0–10 V, 0–5 V, 0–2.5 V, 0–1.25 V - **Analog Output Capability:** Two 12-bit analog output channels with ±10 V or 0–10 V ranges, 1 MS/s update rate, and 1 k-sample FIFO per channel. - **Digital I/O:** 24-channel TTL-compatible programmable digital I/O (8255 PIO). - **Counter/Timer:** Two 16-bit general-purpose up/down counters with 40 MHz internal or 10 MHz external clock support. - **Triggering Options:** Supports software, external analog, and digital triggers, as well as PXI/SSI bus synchronization triggers. - **Auto-Calibration:** Fully automatic calibration with onboard 5.000 V reference (±2 ppm/°C stability). - **Data Transfer:** Supports programmed I/O and scatter-gather DMA for high-speed data throughput. - **Synchronization:** Multiple card synchronization via PXI trigger bus or System Synchronization Interface (SSI). - **Software Support:** Compatible with Windows and Linux; drivers available for LabVIEW®, MATLAB®, C/C++, Visual Basic, and Visual Studio.NET. - **Operating Systems Supported:** Windows 7/8 (x86/x64), Linux kernel 2.4.x and later.

Manufacturer: Adlink Technology Inc.

Category: A/D Intelligent PXI/PXIe/cPCI

- **High-Speed Sampling:** - Dual-channel simultaneous sampling at up to 65 MS/s per channel. - Single-channel “ping-pong” mode supports up to 130 MS/s. - **High Resolution:** - 14-bit A/D conversion for precise signal digitization. - **Deep Onboard Memory:** - 128 MB standard SODIMM SDRAM, expandable to 512 MB. - 3k-sample FIFO for real-time streaming. - **Flexible Input Configuration:** - Programmable input ranges of ±1 V and ±5 V. - Selectable input impedance: 50 Ω or 1.5 MΩ. - **Triggering Flexibility:** - Supports software, analog, digital, and SSI (System Synchronization Interface) triggers. - Trigger modes include pre-trigger, post-trigger, middle-trigger, and delay-trigger. - Repeated trigger acquisition with minimal rearming interval (2 timebase cycles). - **Synchronization Capability:** - SSI bus for multi-module synchronization using shared clock and trigger signals. - **Auto-Calibration:** - Fully automated offset and gain calibration using onboard DACs. - Calibration constants stored in EEPROM for persistent accuracy. - **Data Transfer Efficiency:** - Scatter-gather bus mastering DMA for high-throughput data transfer to host memory. - **Robust Design:** - Compact PXI form factor with BNC and SMB connectors. - Operating temperature range: 0°C to 50°C.

Manufacturer: Adlink Technology Inc.

Category: A/D High Speed PXI/PXIe

- **High-Speed Sampling:** - 65 MS/s simultaneous sampling on two channels. - 130 MS/s single-channel sampling in ping-pong mode. - **High Resolution:** - 14-bit A/D conversion for precise waveform digitization. - **Deep Onboard Memory:** - 512 MB SODIMM SDRAM for extended waveform recording. - 3k-sample FIFO for real-time streaming. - **Flexible Input Configuration:** - Programmable input ranges of ±1 V and ±5 V. - Selectable input impedance: 50 Ω or 1.5 MΩ. - **Triggering Flexibility:** - Supports software, analog, and digital triggers. - Trigger modes: pre-trigger, post-trigger, middle-trigger, delay-trigger. - Repeated trigger acquisition with 2-cycle rearming interval. - **Synchronization Capability:** - System Synchronization Interface (SSI) for multi-module synchronization. - Common trigger and timebase sharing across multiple PXI-9820 modules. - **Auto-Calibration:** - Fully automated offset and gain calibration using onboard DACs. - Calibration constants stored in EEPROM for long-term stability. - **Data Transfer Efficiency:** - Scatter-gather bus mastering DMA for high-speed data transfer to host memory. - Real-time transfer bypassing SDRAM when bandwidth allows. - **Robust Design:** - Compact PXI form factor with plug-and-play configuration. - Integrated DC/DC converter for stable operation.

Manufacturer: Adlink Technology Inc.

Category: A/D High Speed PXI/PXIe

- **Simultaneous Sampling:** 8 differential analog input channels (PXI-2020) or 16 channels (PXI-2022) with simultaneous 16-bit sampling at up to 250 kS/s per channel. - **High Resolution:** 16-bit A/D conversion using ADI AD7685 converter for precise signal digitization. - **Programmable Input Range:** Bipolar input ranges of ±10 V and ±2.5 V with programmable gain settings (x1, x4). - **Auto Calibration:** Fully automated calibration with onboard 5.000 V reference, eliminating manual trim adjustments. - **Flexible Triggering:** Supports software, external digital, PXI Star, and PXI Trigger Bus triggers with multiple trigger modes (pre-, post-, middle-, and delay-trigger). - **Digital I/O:** 4-channel programmable TTL/CMOS digital input/output lines. - **Timer/Counter:** Two 32-bit general-purpose up/down timer/counters with programmable clock and gate sources. - **Synchronization:** Multi-module synchronization via PXI Trigger Bus and System Synchronization Interface (SSI). - **Memory Buffer:** 8 K-sample (16 KB) onboard FIFO for continuous data streaming. - **PXI Compliance:** PXI Specification Rev. 2.2 compliant, supporting both 3.3 V and 5 V PCI signaling. - **Software Support:** Compatible with Windows and Linux; drivers available for LabVIEW™, MATLAB®, and ADLINK’s DAQPilot and D2K-DASK libraries. - **Form Factor:** Compact 3U PXI module (100 mm x 160 mm).

Manufacturer: Adlink Technology Inc.

Category: A/D Intelligent PXI/PXIe/cPCI

- **High-Resolution Digitization:** 16-bit ADC resolution across four simultaneous single-ended channels. - **Sampling Rate:** Up to 10 MS/s per channel (PXI-9816D model). - **Deep Onboard Memory:** 512 MB SDRAM shared across four channels, enabling long-duration waveform recording independent of PCI/PXI bus transfer rates. - **Programmable Input Range:** Software-selectable ±0.2 V or ±1 V input ranges for optimal dynamic range and signal fidelity. - **Selectable Input Impedance:** Software-configurable 50 Ω or 1 MΩ input impedance for flexible signal interfacing. - **Flexible Triggering:** Supports software, external digital, analog, PXI STAR, and PXI Trigger Bus triggers with multiple trigger modes (pre-, post-, middle-, delay-, and re-trigger). - **Synchronization:** Multi-module synchronization via PXI Trigger Bus or SSI interface for scalable, time-aligned data acquisition systems. - **Auto-Calibration:** Built-in precision 5 V reference with ±3 ppm/°C drift for fully automated calibration and long-term accuracy. - **High Dynamic Performance:** Typical SFDR of 90 dBc, SINAD of 79 dBc, and ENOB of 12.8 bits. - **PXI 3U Eurocard Form Factor:** Compact 160 mm × 100 mm module compatible with standard PXI chassis. - **Software Support:** Comprehensive driver suite including DAQPilot, DAQMaster, and WD-DASK for Windows, LabVIEW®, and MATLAB® environments.

Manufacturer: Adlink Technology Inc.

Category: A/D High Speed PXI/PXIe

- **High-Resolution Digitization:** 16-bit ADC resolution providing precise signal representation with up to 12.8-bit effective number of bits (ENOB). - **Sampling Rate:** Up to 10 MS/s per channel with simultaneous sampling across four channels. - **Deep Onboard Memory:** 512 MB SDRAM shared across channels for extended waveform recording independent of PCI bus bandwidth. - **Programmable Input Range:** Software-selectable ±1 V or ±5 V input range for flexible signal conditioning. - **Selectable Input Impedance:** Software-configurable 50 Ω or 1 MΩ input impedance for compatibility with various signal sources. - **Flexible Triggering:** Supports software, external digital, analog, PXI STAR, and PXI Trigger Bus triggers with multiple trigger modes (pre-, post-, middle-, delay-trigger). - **Synchronization Support:** PXI Trigger Bus and SSI interface enable multi-module synchronization for complex measurement systems. - **Auto-Calibration:** Built-in precision reference with ±3 ppm/°C drift for stable calibration and long-term accuracy. - **High Dynamic Performance:** Typical SFDR of 90 dBc, SINAD of 79 dBc, and THD below -89 dBc at 1 MHz input frequency. - **Software Integration:** Compatible with ADLINK DAQPilot, DAQMaster, and WD-DASK drivers for Windows, LabVIEW®, and MATLAB®. - **Compact PXI Form Factor:** 3U Eurocard module (100 mm × 160 mm) for easy integration into PXI chassis.

Manufacturer: Adlink Technology Inc.

Category: A/D High Speed PXI/PXIe

- **High-Speed Sampling:** 20 MS/s per channel simultaneous sampling across four channels. - **High Resolution:** 16-bit ADC resolution (1 part in 65,536). - **Deep Onboard Memory:** 512 MB SDRAM shared across channels for extended waveform recording. - **Programmable Input Range:** ±0.2 V or ±1 V, software selectable. - **Selectable Input Impedance:** 50 Ω or 1 MΩ, software controlled. - **Wide Bandwidth:** Typical -3 dB bandwidth of 9.6 MHz at ±1 V input range. - **Flexible Triggering:** Supports software, external digital, analog, PXI STAR, and PXI Trigger Bus triggers. - **Multiple Trigger Modes:** Post-trigger, pre-trigger, middle-trigger, delay-trigger, and re-trigger acquisition. - **Multi-Module Synchronization:** PXI Trigger Bus and PXI STAR support for synchronized operation across multiple modules. - **Auto Calibration:** Built-in precision 5 V reference with ±3 ppm/°C drift for software-controlled calibration. - **Scatter-Gather DMA:** Efficient data transfer to host memory without CPU overhead. - **PXI 3U Form Factor:** Compact, modular design for PXI chassis integration. - **Software Support:** Compatible with ADLINK DAQPilot, DAQMaster, and WD-DASK drivers for Windows, LabVIEW®, and MATLAB® environments.

Manufacturer: Adlink Technology Inc.

Category: A/D High Speed PXI/PXIe

- **High‑Speed, High‑Resolution Acquisition:** Four simultaneous 16‑bit ADC channels with sampling rates up to **40 MS/s** per channel. - **Deep Onboard Memory:** **512 MB SDRAM** shared across channels allows long waveform recording independent of PCI/PXI bus throughput. - **Programmable Input Range and Impedance:** Software‑selectable **±0.2 V or ±1 V** input ranges; switchable **50 Ω or 1 MΩ** input impedance for flexible signal interfacing. - **Wide Bandwidth:** Typical **20 MHz (‑3 dB)** analog input bandwidth at 50 Ω impedance. - **Flexible Triggering:** Supports **software, external digital, analog, PXI STAR, PXI Trigger Bus, and SSI** trigger sources. Trigger modes include **pre‑trigger, post‑trigger, middle‑trigger, delay‑trigger, and re‑trigger** operation. - **Multi‑Module Synchronization:** PXI Trigger Bus and STAR Trigger support enable precise synchronization of multiple modules. - **Auto‑Calibration:** Built‑in precision 5 V reference with ±3 ppm/°C drift ensures stable calibration and accuracy across temperature variations. - **Scatter‑Gather DMA:** Efficient data transfer using non‑contiguous memory blocks for high‑throughput acquisition. - **Software Support:** Compatible with **DAQPilot**, **DAQMaster**, and **WD‑DASK** drivers for Windows, LabVIEW®, MATLAB®, and ActiveX environments. - **Compact PXI Form Factor:** 3U Eurocard (100 mm × 160 mm) module with front‑panel BNC and SMB connectors.

Manufacturer: Adlink Technology Inc.

Category: A/D High Speed PXI/PXIe

- **High‑Speed Sampling:** 40 MS/s per channel simultaneous sampling across four 16‑bit ADCs. - **High Resolution:** True 16‑bit resolution (1 in 65,536) for accurate signal representation. - **Wide Bandwidth:** Typical –3 dB bandwidth of 20 MHz (50 Ω input) and up to 80 MHz for ±1 V range. - **Large Onboard Memory:** 512 MB SDRAM shared across four channels for long acquisition sessions. - **Programmable Input Range:** Software‑selectable ±0.2 V or ±1 V (also ±1 V/±5 V for H‑variants). - **Selectable Input Impedance:** 50 Ω or 1 MΩ, software‑configurable for flexible signal interfacing. - **Flexible Triggering:** Supports software, external digital, analog, PXI STAR, and PXI Trigger Bus triggers. - **Multiple Trigger Modes:** Post‑trigger, pre‑trigger, middle‑trigger, delay‑trigger, and re‑trigger operation. - **Multi‑Module Synchronization:** PXI Trigger Bus and SSI interface enable precise synchronization of multiple modules. - **Auto‑Calibration:** Built‑in precision 5 V reference with ±3 ppm/°C drift for fully automated calibration. - **Scatter‑Gather DMA:** Efficient high‑throughput data transfer to host memory without fragmentation. - **PXI Integration:** Full compliance with PXI 3U Eurocard mechanical and electrical standards. - **Software Support:** Compatible with ADLINK DAQPilot, DAQMaster, and WD‑DASK drivers for Windows, LabVIEW®, and MATLAB®. - **High Dynamic Performance:** Typical SINAD 76 dBc, SFDR 91.6 dBc, ENOB 12.3 bits at 40 MS/s. - **Compact Form Factor:** Single‑slot 3U PXI module (100 × 160 mm).

Manufacturer: Adlink Technology Inc.

Category: A/D High Speed PXI/PXIe