- **Fixed Voltage Gain:** Amplifies input signals from ±1.0 V to ±5.0 V, providing a precise gain factor of 5. - **Bandwidth:** Operates effectively up to 10 kHz, ensuring accurate signal reproduction for low- to mid-frequency analog signals. - **High Linearity:** Maintains proportional signal amplification with minimal distortion or phase shift across the specified frequency range. - **Stable Operation:** Designed for consistent performance under varying load and temperature conditions. - **Compact Form Factor:** Suitable for integration into control cabinets, instrumentation racks, or modular signal conditioning systems. - **Low Noise Design:** Ensures clean signal amplification with minimal interference or noise introduction. - **Input and Output Isolation (if applicable):** May include galvanic isolation between input and output circuits to prevent ground loops and enhance measurement safety. - **Industrial Reliability:** Built for continuous operation in industrial environments, with robust construction and reliable electronic components. - **Ease of Integration:** Compatible with standard analog signal interfaces and control systems. - **Application Flexibility:** Suitable for measurement, control, and monitoring systems requiring precise voltage scaling.

Manufacturer: No category

Category: Standard Mod.

- **Precision Voltage Amplification:** Converts and scales analog input signals from ±10 V to ±5 V output range with high linearity and low distortion. - **10 kHz Bandwidth:** Optimized for low- to mid-frequency analog signals, suitable for control loops, monitoring systems, and general signal conditioning. - **Differential Input Configuration:** Accepts bipolar input voltages, ensuring compatibility with a wide range of sensors and transducers. - **Stable Gain Characteristics:** Designed for consistent amplification across the specified frequency range, minimizing drift and noise. - **Compact Modular Design:** Suitable for DIN-rail or panel mounting in industrial enclosures. - **High Signal Integrity:** Low noise floor and high common-mode rejection ratio (CMRR) for accurate signal reproduction. - **Industrial-Grade Reliability:** Built for continuous operation in demanding environments with robust electrical and mechanical design. - **Ease of Integration:** Standardized input/output voltage levels allow direct interfacing with PLCs, data acquisition systems, and analog controllers.

Manufacturer: No category

Category: Standard Mod.

- **High-Precision Voltage Amplification:** Converts low-level input signals (±100 mV) into a standard ±5 V output range, suitable for analog control and data acquisition systems. - **Wide Bandwidth:** Operates effectively up to 10 kHz, ensuring accurate reproduction of dynamic signals within this frequency range. - **Stable Gain Factor:** Provides a fixed gain ratio of 50 (±5 V output from ±100 mV input), ensuring consistent signal scaling. - **Low Noise and Distortion:** Designed for high signal fidelity, minimizing noise introduction and maintaining signal integrity. - **Differential Input Configuration:** Supports bipolar input signals, improving common-mode noise rejection and measurement accuracy. - **Compact and Robust Design:** Suitable for integration into industrial environments, control cabinets, and instrumentation racks. - **Standardized Output Range:** ±5 V output compatible with most analog input channels of PLCs, DAQ systems, and controllers. - **Frequency Response Optimization:** Maintains linear amplification characteristics up to 10 kHz, ideal for low- to mid-frequency analog signals. - **Industrial Reliability:** Built for continuous operation in demanding environments with stable thermal and electrical performance.

Manufacturer: No category

Category: Standard Mod.

- **High-Precision Voltage Amplification:** Converts low-level input signals (±10 mV) into a high-level output (±5 V), enabling accurate signal scaling for measurement and control systems. - **Wide Bandwidth:** Operates effectively up to **10 kHz**, supporting dynamic signal applications such as vibration, pressure, or strain measurements. - **Linear Response:** Maintains consistent gain and phase characteristics across the specified frequency range, ensuring signal integrity. - **Low Noise Design:** Optimized internal circuitry minimizes noise and interference, preserving signal quality even at low input levels. - **Differential Input Configuration:** Accepts bipolar input signals, improving common-mode noise rejection and measurement accuracy. - **Standardized Output Range:** ±5 V output compatible with most analog input channels in industrial controllers, PLCs, and DAQ systems. - **Compact Modular Form Factor:** Designed for integration into control cabinets, instrumentation racks, or modular signal conditioning systems. - **Stable Gain Factor:** Fixed gain ratio of approximately 500:1 (from ±10 mV input to ±5 V output), ensuring repeatable performance. - **Industrial Reliability:** Built for continuous operation in demanding environments, with robust electrical isolation and thermal stability.

Manufacturer: No category

Category: Standard Mod.

- **DC to AC Conversion:** Converts 12 V DC input voltage from a vehicle battery or cigarette lighter socket to a 230 V AC output at 50 Hz, suitable for standard European electrical devices. - **Modified Sine Wave Output:** Utilizes a modified sine wave inverter topology, offering a balance between cost efficiency and compatibility with a wide range of electronic devices such as chargers, small appliances, and lighting equipment. - **Compact and Lightweight Design:** Measuring only 154 × 72 × 45 mm and weighing approximately 490 grams, the unit is highly portable and easy to store in a glove compartment or travel kit. - **Plug-and-Play Operation:** Designed for direct connection to a vehicle’s cigarette lighter socket, eliminating the need for complex wiring or installation. - **Safety and Certification:** Certified according to TÜV, GS, and CE standards, ensuring compliance with European safety, quality, and electromagnetic compatibility requirements. - **Overload and Peak Power Handling:** Rated for continuous operation at 150 VA with a maximum surge capacity of 200 VA, allowing short-term power delivery for devices with higher startup currents. - **Durable Construction:** Built with robust materials and internal protection circuits to ensure long service life and stable performance under typical automotive conditions. - **Universal 230V Output Socket:** Provides a standard European Schuko-type AC outlet for direct connection of compatible plugs.

Manufacturer: No category

Category: Industrial Power Supplies

- **DC to AC Conversion:** Converts 24V DC input voltage to a 230V AC output at 50Hz, suitable for powering standard household or office electrical devices. - **Modified Sine Wave Output:** Utilizes a modified sine wave output signal, providing compatibility with a wide range of electronic devices such as chargers, small tools, lighting, and low-power appliances. - **Rated Power:** 150 VA continuous output power, with a maximum peak power capacity of up to 200 VA for short-duration loads. - **Plug-and-Play Connection:** Designed for direct connection to a vehicle’s 24V cigarette lighter socket, ensuring easy installation and portability. - **Compact and Lightweight Design:** With dimensions of 154 × 72 × 45 mm and a weight of approximately 490 grams, the inverter is optimized for mobile use and easy storage. - **Safety and Quality Certifications:** TÜV, GS, and CE certified, ensuring compliance with European safety, quality, and electromagnetic compatibility standards. - **Thermal and Overload Protection:** Integrated safety mechanisms protect against overheating, short circuits, and overload conditions. - **Durable Construction:** Built with robust materials suitable for automotive and mobile environments, ensuring long-term reliability. - **Universal 230V Output Socket:** Provides a standard European AC outlet for connecting compatible devices.

Manufacturer: No category

Category: Industrial Power Supplies

- **Purpose-Built Spare Component:** Designed as a replacement or spare part for Nuvo-3003P and Nuvo-3005P systems, ensuring continued operation and minimizing downtime. - **PCI Expansion Interface:** Provides the physical and electrical interface for PCI expansion cards, supporting standard PCI bus communication. - **High Reliability Design:** Manufactured to meet industrial-grade standards for durability, thermal stability, and mechanical robustness. - **Full Compatibility:** 100% compatible with Nuvo-3003P/3005P chassis and motherboard configurations. - **Ease of Replacement:** Modular design allows straightforward installation and replacement without requiring system redesign or modification. - **Optimized Signal Integrity:** Engineered PCB layout ensures stable PCI signal transmission and minimal interference. - **Industrial-Grade Materials:** Constructed using high-quality PCB substrate and connectors rated for extended temperature and vibration tolerance. - **Service and Maintenance Support:** Serves as an official spare part from Neousys, ensuring warranty compliance and long-term support availability.

Manufacturer: Neousys Technology

Category: Nuvo-3000-Series

- **Purpose-Built Spare Kit:** Designed as a direct replacement or spare part for Nuvo-3003E and Nuvo-3005E systems, ensuring full mechanical and electrical compatibility. - **PCI Express Interface Support:** Provides PCIe slot connectivity for expansion cards, enabling system customization and scalability. - **High Reliability Design:** Built to meet industrial-grade standards for durability, vibration resistance, and long-term operation. - **Optimized for Nuvo-3000 Series:** Tailored to the Nuvo-3000 chassis layout, ensuring precise alignment with the motherboard, power supply, and I/O interfaces. - **Ease of Maintenance:** Facilitates quick replacement in the field, minimizing downtime and simplifying service operations. - **Robust Construction:** Manufactured using high-quality PCB materials and connectors rated for industrial temperature and mechanical stress conditions. - **Electrical Integrity:** Designed to maintain signal integrity for high-speed PCIe communication, supporting stable data transfer and low latency. - **Plug-and-Play Compatibility:** No firmware or software configuration required; functions as a direct hardware interface component.

Manufacturer: No category

Category: Nuvo-3000-Series

SSD-128GB-MLC

Manufacturer: Intel

Category: SSD MLC

- **Wide Temperature Range:** Operates reliably from **-40°C to +85°C**, suitable for harsh industrial and outdoor environments. - **128 GB Storage Capacity:** Provides ample space for operating systems, applications, and data logging in embedded or industrial systems. - **MLC NAND Flash Technology:** Ensures a balance of high performance, endurance, and cost-effectiveness compared to SLC or TLC alternatives. - **Industrial-Grade Design:** Built with components rated for extended temperature and vibration tolerance, ensuring long-term reliability. - **High Shock and Vibration Resistance:** Designed to withstand mechanical stress common in mobile, vehicular, and factory environments. - **Low Power Consumption:** Optimized for energy-efficient operation, ideal for fanless or battery-powered systems. - **Fast Data Access:** Delivers high read/write speeds for quick boot times and responsive system performance. - **Enhanced Data Integrity:** Incorporates advanced error correction code (ECC), wear leveling, and bad block management to maintain data reliability. - **SMART Support:** Self-Monitoring, Analysis, and Reporting Technology for predictive failure analysis and maintenance planning. - **TRIM Command Support:** Ensures sustained performance over time by optimizing data management. - **RoHS Compliant:** Meets environmental and safety standards for hazardous substances.

Manufacturer: Intel

Category: SSD MLC

SSD-32GB-MLC

Manufacturer: Intel

Category: SSD MLC

- **Wide Temperature Range:** Operates reliably from -40°C to +85°C, suitable for outdoor, industrial, and mission-critical environments. - **32 GB Storage Capacity:** Provides sufficient capacity for operating systems, application data, and logging in embedded and industrial systems. - **MLC NAND Flash Technology:** Utilizes Multi-Level Cell flash for a balance of endurance, performance, and cost-effectiveness. - **Industrial-Grade Design:** Built with high-quality components rated for extended temperature and vibration tolerance. - **Enhanced Data Integrity:** Incorporates advanced error correction code (ECC) and wear-leveling algorithms to ensure data reliability and extended lifespan. - **Shock and Vibration Resistance:** Solid-state design with no moving parts ensures mechanical robustness and resistance to shock and vibration. - **Low Power Consumption:** Optimized for energy-efficient operation, ideal for embedded systems and battery-powered devices. - **High-Speed Interface:** Compatible with standard SATA interfaces (typically SATA II or SATA III, depending on configuration), ensuring fast data transfer rates. - **Long-Term Availability:** Designed for industrial supply chains with stable component sourcing and extended product lifecycle support. - **Secure Data Management:** May include features such as S.M.A.R.T. monitoring, TRIM command support, and secure erase functionality for data protection.

Manufacturer: Intel

Category: SSD MLC

SSD-32GB-SLC 24/7

Manufacturer: Intel

Category: SSD SLC

- **High-Endurance SLC NAND Flash:** Utilizes Single-Level Cell technology, offering superior write endurance, data retention, and reliability compared to MLC or TLC NAND. - **Wide Temperature Range:** Fully operational from **-40°C to +85°C**, ensuring stable performance in extreme industrial and outdoor environments. - **24/7 Continuous Operation:** Designed for non-stop, mission-critical applications requiring constant uptime and reliability. - **Industrial-Grade Design:** Built with robust components, enhanced power management, and advanced error correction to withstand vibration, shock, and temperature fluctuations. - **Enhanced Data Integrity:** Incorporates ECC (Error Correction Code), wear leveling, and bad block management for consistent data reliability. - **Fast Data Access:** Optimized for high read/write speeds suitable for real-time data logging, boot drives, and embedded control systems. - **Low Power Consumption:** Efficient power design minimizes energy usage, ideal for embedded and mobile industrial systems. - **Compact Form Factor:** Available in standard SSD form factors (e.g., 2.5" SATA or mSATA, depending on configuration), enabling easy integration into existing systems. - **Long Product Lifecycle:** Industrial supply chain stability ensures long-term availability and consistent performance specifications.

Manufacturer: Intel

Category: SSD SLC

SSD-64GB-MLC

Manufacturer: Intel

Category: SSD MLC

- **Wide Temperature Range:** Operates reliably from **–40 °C to +85 °C**, ensuring stable performance in harsh industrial and outdoor environments. - **64 GB Storage Capacity:** Provides ample space for operating systems, applications, and data logging in embedded and industrial systems. - **MLC NAND Flash Technology:** Utilizes Multi-Level Cell flash memory for a balance of endurance, performance, and cost-effectiveness. - **Industrial-Grade Design:** Built with high-quality components and firmware optimized for long-term stability and data integrity. - **Shock and Vibration Resistant:** Solid-state design with no moving parts ensures durability under mechanical stress. - **Low Power Consumption:** Optimized for energy-efficient operation, suitable for fanless and battery-powered systems. - **High Data Reliability:** Incorporates advanced error correction code (ECC), wear leveling, and bad block management to extend lifespan and maintain data integrity. - **Fast Data Access:** Provides high read/write speeds suitable for real-time data acquisition and system boot operations. - **Compact Form Factor:** Available in standard SSD form factors (e.g., 2.5-inch SATA or mSATA, depending on configuration) for easy integration into industrial PCs and embedded systems. - **Extended Endurance:** Designed for continuous 24/7 operation in mission-critical environments.

Manufacturer: Intel

Category: SSD MLC

SSD-64GB-SLC 24/7

Manufacturer: Intel

Category: SSD SLC

- **Industrial-Grade SLC NAND Flash:** Utilizes Single-Level Cell technology for maximum endurance, data retention, and write cycle longevity, significantly outperforming MLC and TLC-based drives in reliability. - **Wide Temperature Range:** Fully operational from -40°C to +85°C, ensuring stable performance in extreme cold and heat, suitable for outdoor, vehicular, and factory environments. - **24/7 Continuous Operation:** Designed for mission-critical systems requiring uninterrupted service, such as industrial control units, network appliances, and embedded computing platforms. - **Enhanced Data Integrity:** Incorporates advanced error correction code (ECC), wear-leveling algorithms, and bad block management to maintain data accuracy and extend drive lifespan. - **High Shock and Vibration Resistance:** Built to withstand mechanical stress and vibration typical of industrial and mobile installations. - **Low Power Consumption:** Optimized for energy efficiency, reducing thermal load and power draw in embedded systems. - **Fast Data Access:** Provides high read/write speeds suitable for real-time data logging, boot operations, and high-frequency data acquisition. - **Compact Form Factor:** Available in standard SSD form factors (e.g., 2.5" SATA or mSATA, depending on configuration), enabling easy integration into existing systems. - **Long-Term Availability:** Designed for industrial lifecycle support, ensuring consistent supply and firmware stability over extended production periods.

Manufacturer: Intel

Category: SSD SLC

- **Dual-Device Connectivity:** Supports simultaneous connection of **two SSI devices** to a single controller or interface card, enabling multi-axis or dual-sensor configurations. - **High Signal Integrity:** Designed with **shielded twisted-pair conductors** to minimize electromagnetic interference (EMI) and maintain accurate synchronous serial communication. - **Optimized for ADLINK Motion Controllers:** Fully compatible with ADLINK’s motion control and data acquisition systems, ensuring plug-and-play operation and reliable performance. - **Industrial-Grade Construction:** Built with durable materials and robust connectors suitable for continuous operation in industrial environments. - **Precise Data Transmission:** Maintains synchronization between master and slave devices, supporting high-resolution encoder feedback and deterministic communication. - **Ease of Integration:** Pre-terminated connectors and standardized pin assignments simplify installation and reduce setup time. - **Compact and Flexible Design:** Cable length and flexibility allow for easy routing within control cabinets or machinery. - **Reliable SSI Communication:** Supports standard SSI protocol for absolute encoders and sensors, ensuring compatibility with a wide range of industrial devices.

Manufacturer: Adlink Technology Inc.

Category: Cables and Accessories

- **Multi-Device Connectivity:** Supports simultaneous connection of up to **three SSI devices** to a single controller or host interface. - **Optimized for SSI Communication:** Designed specifically for **Synchronous Serial Interface (SSI)** signal transmission, ensuring accurate clock and data synchronization. - **High Signal Integrity:** Shielded cable construction minimizes electromagnetic interference (EMI) and crosstalk, maintaining stable communication in electrically noisy industrial environments. - **Plug-and-Play Compatibility:** Pre-terminated connectors simplify installation and reduce wiring errors. - **Industrial-Grade Durability:** Built with robust materials suitable for continuous operation in factory automation, robotics, and motion control systems. - **Compact and Flexible Design:** Facilitates easy routing within control cabinets or machinery with limited space. - **Reliable Data Transmission:** Ensures consistent performance for high-resolution encoders and sensors requiring precise timing. - **Adlink System Integration:** Fully compatible with ADLINK motion controllers, data acquisition cards, and other SSI-enabled modules.

Manufacturer: Adlink Technology Inc.

Category: Cables and Accessories

- **Multi-Device Connectivity:** Supports simultaneous connection of up to **four SSI devices** (e.g., encoders, sensors, or position transducers) to a single SSI interface channel. - **High Signal Integrity:** Engineered for **low-noise, shielded signal transmission**, ensuring accurate data communication over extended cable lengths. - **Industrial-Grade Construction:** Built with **durable insulation, shielding, and strain relief** to withstand mechanical stress, vibration, and electromagnetic interference (EMI). - **Plug-and-Play Compatibility:** Designed for seamless integration with **ADLINK motion control cards, data acquisition modules, and industrial PCs** that support SSI communication. - **Optimized for Synchronization:** Maintains precise timing and synchronization between connected devices, critical for motion control and position feedback systems. - **Flexible Configuration:** Supports both **point-to-point** and **multi-drop** SSI configurations, depending on the host controller’s capabilities. - **Reliable Electrical Performance:** Ensures stable clock and data signal transmission with minimal latency and distortion. - **Compact and Organized Design:** Provides a clean, organized wiring solution for multi-device SSI setups, reducing installation complexity. - **Extended Temperature Range:** Suitable for operation in industrial temperature conditions, ensuring consistent performance in harsh environments.

Manufacturer: Adlink Technology Inc.

Category: Cables and Accessories

- **StarFabric-Compliant High-Speed Serial Transfer:** Supports 2.5 Gbps serial data transfer rate, ensuring stable, high-throughput communication between host and expansion chassis. - **Extended PCI Bus Connectivity:** Expands a standard 5 V/32-bit 33 MHz PCI bus through a CardBus interface, allowing use of standard PCI boards externally. - **Long-Distance Operation:** Supports up to 12 m connection distance using Category 5e STP cables, ideal for distributed measurement and control systems. - **Noise-Resistant Cabling:** Uses shielded twisted-pair (STP) cables to minimize electromagnetic interference in industrial environments. - **Compact CardBus Form Factor:** PC Card Standard Type II (119.0 × 54.0 × 19.0 mm) for easy installation in notebook PCs. - **Plug-and-Play Expansion:** Provides seamless PCI bus extension without requiring modification of existing PCI boards or application software. - **Power Synchronization:** The expansion chassis power supply can be turned on and off in synchronization with the host PC’s power. - **Flexible Chassis Compatibility:** Compatible with multiple StarFabric-compliant PCI expansion chassis models (ECH(PCI)SF series) offering 2, 4, 7, or 13 PCI slots. - **Industrial Reliability:** Designed for continuous operation in 0 – 50 °C environments with 20 – 90 % RH humidity tolerance (non-condensing). - **Operating System Support:** Compatible with Windows XP and Windows 2000 (dedicated driver required).

Manufacturer: Contec

Category: Bus Extensions

- **StarFabric-Compliant High-Speed Serial Transfer:** Supports 2.5 Gbps serial data transfer, enabling reliable PCI bus extension over long distances (up to 12 m). - **PCI Bus Compatibility:** Fully compliant with PCI Local Bus Specification Rev. 2.2 (+5V / +3.3V). Allows use of existing PCI add-on boards and software without modification. - **Low Profile and Standard PCI Slot Support:** Designed for low-profile PCI slots but includes a standard PCI bracket for compatibility with full-height slots. - **Extended Distance Operation:** Utilizes noise-resistant Category 5e STP cables for stable operation in industrial environments. Two 12-meter cables are included. - **Remote Power Synchronization:** The expansion chassis power supply can be turned on and off in synchronization with the host PC’s power state. - **Flexible Expansion Options:** Compatible with multiple expansion chassis configurations (2, 4, 7, or 13 PCI slots; short or long board sizes; AC adapter or built-in power supply). - **Industrial Reliability:** Designed for measurement and control applications requiring remote I/O or distributed system architectures. - **Operating System Support:** Compatible with Windows XP and Windows 2000 (dedicated driver installation required). - **RoHS Compliance:** Environmentally friendly design meeting RoHS directives.

Manufacturer: Contec

Category: Bus Extensions

- **StarFabric‑compliant high‑speed serial transfer:** Supports 2.5 Gbps serial communication between host and expansion chassis, ensuring stable, low‑latency data transfer over distances up to 12 m. - **Long‑distance PCI bus extension:** Extends the PCI bus up to 12 meters using Category 5e shielded twisted‑pair (STP) cables, allowing flexible system layouts and remote equipment placement. - **PCI Express host interface:** Occupies one PCI Express slot in the host PC to provide additional PCI (5 V/32‑bit, 33 MHz) slots in an external expansion chassis. - **Full PCI bus compatibility:** Complies with PCI Local Bus Specification Rev. 2.2, ensuring compatibility with existing PCI boards and software without modification. - **Low‑profile form factor:** Designed for low‑profile PCI Express slots; includes a standard‑height bracket for use in full‑size PCIe slots. - **Noise‑resistant cabling:** Uses shielded Category 5e STP cables for reliable operation in electrically noisy industrial environments. - **Automatic power synchronization:** The expansion chassis power supply can be turned on and off in synchronization with the host PC’s power state. - **Flexible chassis selection:** Compatible with multiple StarFabric expansion chassis models (ECH(PCI)SF series) offering 2, 4, 7, or 13 PCI slots, available in short or long board configurations and with either AC adapter or built‑in power supply. - **Industrial reliability:** Designed for continuous operation in 0 – 50 °C and 10 – 90 % RH environments, suitable for factory automation and measurement systems.

Manufacturer: Contec

Category: Bus Extensions

- **StarFabric-Compliant High-Speed Serial Transfer:** Supports 2.5Gbps serial data transfer between host PC and expansion chassis using StarFabric technology, ensuring stable, high-speed communication over long distances (up to 12m). - **13 PCI Expansion Slots:** Provides 13 long-size PCI slots compliant with PCI Local Bus Specification Rev.2.2 (+5V type), allowing installation of multiple PCI boards for data acquisition, control, or communication. - **Full-Size Industrial Chassis:** Constructed from durable steel, finished in light grey, and designed for industrial environments. The chassis includes a built-in cooling fan and is rack-mountable with supplied brackets. - **Integrated Power Supply:** Equipped with a 230W internal power supply (115/230VAC switch-selectable). The power system automatically synchronizes with the host PC’s power state for seamless operation. - **Remote Power Interlocking:** The chassis power can be turned on/off in synchronization with the host PC’s power supply. A jumper (JP1) allows manual override for independent operation. - **Flexible Connectivity:** Connects to the host PC via optional expansion adapters (EAD(LPCI)SF for Low Profile PCI or EAD(CB)SF for CardBus). Uses noise-resistant Category 5e STP cables for reliable communication. - **High Compatibility:** Fully compatible with standard PCI boards (5V/32-bit, 33MHz). No software modification required for existing PCI-based applications. - **Environmental Durability:** Designed for 0–50°C operation and 20–80%RH humidity (non-condensing). Built for long-term reliability in industrial and laboratory environments. - **Safety and Maintenance:** Includes built-in cooling fan and replaceable fan filter. Power supply and fan are rated for approximately five years of continuous operation under standard office conditions.

Manufacturer: Contec

Category: Bus Extensions