- **62-Pin D-sub Connectivity:** Equipped with a **62-pin D-sub male connector** on one end and a **62-pin D-sub female connector** on the other, ensuring full pin-to-pin continuity for high-density signal interfacing. - **High Signal Integrity:** Designed with **shielded twisted-pair wiring** and **grounded metal shells** to minimize electromagnetic interference (EMI) and crosstalk, ensuring accurate analog and digital signal transmission. - **Durable Construction:** Features **molded strain reliefs** at both connector ends to prevent cable fatigue and mechanical stress during repeated connection cycles. - **Optimized Length (1 Meter):** Provides sufficient reach for typical rack-mounted or benchtop setups while minimizing signal degradation and clutter. - **Compatibility with ADLINK DAQ Products:** Fully compatible with ADLINK’s PCI, PXI, and USB DAQ cards and terminal boards that utilize 62-pin D-sub connectors, such as the **ACL-6128**, **ACL-6126**, and **ACL-6125** series. - **Plug-and-Play Design:** No additional configuration required; supports direct connection between DAQ hardware and breakout or terminal boards. - **Industrial-Grade Reliability:** Built to withstand continuous operation in laboratory and industrial environments, with robust connector housings and high-quality conductors.

Hersteller: Adlink Technology Inc.

Kategorie: High Density Panels

- **96 Isolated Digital Input Channels:** Provides a total of 96 optically isolated input channels for high-density signal interfacing. - **Optical Isolation:** Each input channel is isolated up to **2500 V RMS**, protecting the host system from voltage transients, surges, and ground loops. - **Polarity-Free Input Design:** Supports both AC and DC input signals without polarity constraints, simplifying wiring and installation. - **Wide Input Voltage Range:** Compatible with multiple input thresholds depending on external voltage levels: - 20V/24V input threshold: 8.8V - 12V input threshold: 1.8V - 5V input threshold: 1.8V - **External Input Voltage Threshold Configuration:** Allows flexible adaptation to various industrial signal levels. - **Screw Terminal Interface:** Provides secure and easy field wiring for industrial environments. - **100-pin SCSI-II Connector:** Standardized high-density connector for interfacing with ADLINK data acquisition cards such as the **PCI-7396**. - **DIN-Rail Mounting:** Compact and rugged design suitable for control cabinets and industrial enclosures. - **Low Power Consumption:** Operates at +5 V with a maximum current draw of 48 mA. - **Wide Operating Temperature Range:** Designed for industrial environments with an operating range of **0°C to +60°C**. - **High Reliability:** Built with industrial-grade components for long-term stability and performance.

Hersteller: Adlink Technology Inc.

Kategorie: High Density Panels

- **96 Isolated Digital Output Channels:** Provides a total of 96 optically isolated digital output channels for flexible and scalable control applications. - **Optical Isolation:** Each channel is optically isolated up to **2500 V RMS**, ensuring electrical separation between field signals and control logic, protecting both the host system and connected devices from voltage transients and ground loops. - **High Current Sinking Capability:** Each output channel can sink up to **500 mA**, allowing direct control of relays, solenoids, lamps, and other inductive or resistive loads. - **Open-Collector Darlington Transistor Outputs:** Utilizes Darlington transistor arrays for high current gain and efficient switching performance. - **Flexible Power Supply Range:** Supports external supply voltages from **+5 V DC to +35 V DC**, accommodating a wide range of industrial power systems. - **DIN-Rail Mounting:** Compact and rugged design suitable for DIN-rail installation, simplifying integration into control cabinets and industrial enclosures. - **Screw Terminal Connections:** Equipped with screw terminals for secure and convenient field wiring, minimizing installation time and ensuring reliable electrical contact. - **Standard 100-pin SCSI-II Connector:** Provides a high-density interface for connection to compatible data acquisition or control cards such as the **ADLINK PCI-7396**. - **Compatibility:** Designed for use with ADLINK’s PCI-7396 digital I/O card, ensuring seamless integration and reliable communication between the terminal board and host system. - **Industrial-Grade Design:** Wide operating temperature range (0°C to +60°C) and high humidity tolerance (up to 95% non-condensing) for dependable performance in industrial environments. - **Low Power Consumption:** Consumes only **102 mA at +5 V**, optimizing energy efficiency and reducing system power load.

Hersteller: Adlink Technology Inc.

Kategorie: High Density Panels

- **Universal Screw Terminal Interface:** The DTP-64A allows direct connection of signal lines from external devices using screw terminals, eliminating the need for soldering or crimping. - **High-Density 96-Pin Connector:** Equipped with a 96-pin half-pitch high-density female connector (HD D-sub 96F), compatible with CONTEC’s PIO64 series boards. - **One-to-One Pin Correspondence:** Each pin on the 96-pin connector corresponds directly to a terminal on the screw terminal strip, ensuring straightforward signal mapping and simplified troubleshooting. - **Ease of Integration:** Optional cables can be used to connect the DTP-64A easily to interface boards or cards, providing flexible installation options. - **Compact and Organized Layout:** The terminal board features four groups of 24 small screw terminals (total 96), arranged for efficient wiring and clear labeling. - **Enhanced Electrical Capacity:** Supports up to 60V and 1A per terminal, suitable for low-voltage signal and control applications. - **Improved Design Over Previous Model:** Compared to the DTP-64(PC), the DTP-64A features larger M3 screws, green terminal color, and increased rubber foot height for improved stability and handling. - **Durable Construction:** Built with high-quality terminal components (JITE JTB611-00-2-03-3 equivalent) and a robust connector (HONDA TSUSHIN KOGYO PCR-E96MD+ equivalent). - **Simple Maintenance:** Screw-type terminals allow easy reconfiguration or replacement of connected wires without specialized tools. - **Compatibility:** Designed for use with CONTEC interface boards featuring 96-pin half-pitch connectors, ensuring seamless integration with existing systems.

Hersteller: Contec

Kategorie: High Density Panels

- **DIN-Rail Mountable Termination Panel:** Designed for 35 mm DIN rail installation, enabling compact and organized wiring in control panels or test systems. - **High-Density 96-Pin Half-Pitch Connector:** Equipped with a 96-pin half-pitch (HD D-sub 96f) female connector, compatible with CONTEC’s 96-pin I/O boards and cables. - **Universal Compatibility:** Supports a wide range of CONTEC analog and digital I/O boards, including F, L, and E series multifunction boards, as well as dedicated digital I/O and counter boards. - **Industrial-Grade Construction:** Built for durability and reliability in industrial environments, ensuring stable signal termination and minimal noise interference. - **Ease of Integration:** Simplifies connection between PC-based measurement/control boards and external sensors, actuators, or test equipment. - **Supports Multiple Signal Types:** Suitable for analog input/output, digital input/output, and counter signal termination. - **Cable Compatibility:** Designed for use with CONTEC shielded or flat cables such as PCB96PS, PCB96P, PCA96PS, and PCA96P series. - **Standardized Interface:** Uses the 96-pin half-pitch connector standard (PCR-E96LMD or equivalent), ensuring compatibility with a wide range of CONTEC boards. - **Compact Form Factor:** Space-efficient design (226 × 64 × 36 mm) allows installation in dense control cabinets. - **DIN-ADP1 Adapter Support:** Can be mounted using the optional DIN-ADP1 adapter for flexible installation.

Hersteller: Contec

Kategorie: High Density Panels

**TB‑6201‑01 Terminal Board** - 62‑pin D‑Sub female connector for direct interface with PXI‑7901. - Screw‑terminal design for secure and flexible signal wiring. - Supports all relay channels, auxiliary I/O, and trigger lines from the PXI‑7901. - No cable included (optional ACL‑10262 cable available). - Compact, durable construction for bench or rack‑mount use. **PXI‑7901 Relay Module** - 16 independent SPDT (Single‑Pole Double‑Throw, 1 Form C) non‑latching relays. - PXI Specification Rev. 2.2 compliant; CompactPCI (PICMG 2.0 R3.0) and Hot‑Swap (PICMG 2.1 R2.0) compliant. - 3 A switching and carrying capacity at up to 220 V DC or 250 V AC. - 125 operations per second with full contact settling. - Onboard 1 k‑sample scan list for deterministic auto‑scanning. - Programmable handshaking signals for synchronization with external instruments. - Safety‑critical design with hardware emergency shutdown and watchdog timer. - 8 auxiliary 3.3 V/TTL digital I/O channels (5 V tolerant). - Software‑programmable operation modes and PXI trigger synchronization. - Fully supported by ADLINK’s ADL‑SWITCH driver for Windows.

Hersteller: Adlink Technology Inc.

Kategorie: High Density Panels

- **Purpose‑built for PXI‑7921:** Provides direct connection to the PXI‑7921’s 62‑pin D‑Sub male I/O connector. - **Multiple Multiplexer Configurations:** Supports 48×1 1‑wire, 24×1 2‑wire, 12×1 4‑wire, two 12×1 2‑wire, or four 6×1 2‑wire configurations. - **High‑Density Connectivity:** Accommodates up to 24 DPDT (2 Form C) relay channels through a single 62‑pin interface. - **Screw‑Terminal Interface:** Simplifies field wiring and reconfiguration for laboratory and industrial applications. - **Software‑Selectable Switching:** All channel configurations are controlled via software through the PXI‑7921 module. - **Safety and Reliability:** Designed for safety‑critical applications with support for emergency shutdown and watchdog timer functions through the PXI‑7921. - **PXI System Integration:** Fully compatible with PXI specifications Rev. 2.2 and CompactPCI (PICMG 2.0 R3.0). - **Hot‑Swap Support:** When used with PXI‑7921, supports CompactPCI Hot‑Swap (PICMG 2.1 R2.0). - **Deterministic Scanning:** Enables deterministic relay sequencing through the PXI‑7921’s onboard 1 k‑sample scan list. - **Synchronization:** Supports PXI trigger bus and star trigger synchronization for multi‑module systems.

Hersteller: Adlink Technology Inc.

Kategorie: High Density Panels

- **PXI Specification Compliance:** Fully compliant with PXI Specifications Rev. 2.2 and CompactPCI standards (PICMG 2.0 R3.0 and PICMG 2.1 R2.0 Hot‑Swap). - **Flexible Matrix Configuration:** Supports multiple matrix topologies selectable via the TB‑6231‑01 terminal board: - One 4×8 matrix - Two 4×4 matrices - One 2×16 matrix - Two 2×8 matrices - Four 2×4 matrices - **High‑Performance Relay Array:** Up to 32 cross‑point DPDT (2 Form C) non‑latching relays for 2‑wire switching. - **Electrical Ratings:** - 2 A switching and 2 A carrying current - 220 V DC / 125 V AC maximum switching voltage - 60 W maximum switching power - **Deterministic Scanning:** Onboard 1 k‑sample scan list for deterministic relay sequencing. - **Synchronization:** Handshaking signals and PXI trigger bus/star trigger support for multi‑module synchronization. - **Safety Functions:** Hardware emergency shutdown and programmable watchdog timer (1 ms – 420 s). - **Auxiliary Digital I/O:** Eight 3.3 V/TTL I/O channels (5 V tolerant) for general‑purpose control. - **Software Programmability:** Fully software‑controlled relay configuration and scan sequencing. - **Operating System Support:** Windows Vista/XP/2000/2003. - **Software Tools:** Compatible with VB, VC++, BCB, Delphi, and DAQBench; driver support via ADL‑SWITCH for Windows. - **Safety‑Critical Design:** Includes programmable relay safety states and watchdog protection for industrial reliability.

Hersteller: Adlink Technology Inc.

Kategorie: High Density Panels

- **High Channel Density:** 96 optically isolated digital input channels, enabling compact and efficient signal termination for large-scale control systems. - **Optical Isolation:** Each input channel is optically isolated to protect the host system from voltage transients, ground loops, and electrical noise. - **Polarity-Free Input:** Supports both AC and DC input signals without polarity constraints, simplifying wiring and installation. - **Flexible Input Voltage Thresholds:** Configurable threshold levels based on external input voltage ranges: - 20V/24V input → threshold 8.8V - 12V input → threshold 1.8V - 5V input → threshold 1.8V - **Screw Terminal Connectivity:** Each channel is accessible via screw terminals, allowing secure and convenient field wiring. - **100-pin SCSI Connector Interface:** Standard 100-pin SCSI connector for direct connection to compatible ADLINK digital I/O cards. - **Cable-Free Configuration:** Supplied without the ACL-102100 cable, allowing users to select or customize cable lengths and configurations as needed. - **Industrial-Grade Design:** Built for reliability in demanding industrial environments, with robust isolation and durable terminal construction.

Hersteller: Adlink Technology Inc.

Kategorie: High Density Panels

- **96 Optically Isolated Digital Output Channels:** Provides complete electrical isolation between the control system and field devices, enhancing system reliability and protecting against voltage transients and ground loops. - **Integrated Relay Driver Circuitry:** Each channel includes a relay driver stage capable of sinking current loads ranging from 60 mA up to 350 mA, depending on the number of active channels and duty cycle. - **High-Density Termination Design:** Accommodates 96 channels on a compact board footprint (113 mm × 225 mm), optimizing space utilization in control cabinets or test setups. - **Screw Terminal Connectivity:** Each output channel is accessible via screw terminals, allowing secure and convenient wiring for field connections. - **100-Pin SCSI Connector Interface:** Provides a standardized, high-density connection to compatible ADLINK digital I/O cards, ensuring reliable signal transmission and simplified integration. - **Opto-Isolation for Signal Protection:** Optical isolation prevents electrical noise and surges from damaging sensitive control electronics, improving system durability and safety. - **Flexible Load Driving Capability:** Supports a wide range of output loads, including relays, solenoids, and indicator lamps, suitable for industrial automation and process control. - **Cable-Free Configuration:** Delivered without the ACL-102100 cable, allowing users to select appropriate cable lengths or configurations for their specific installation requirements. - **Compact and Durable Construction:** Designed for industrial-grade reliability, with robust PCB materials and high-quality terminal components.

Hersteller: Adlink Technology Inc.

Kategorie: High Density Panels