EX-9510AH repeater boosts the RS-422(EX9510A)/485 signals to extend the reach distance up to 4000 ft (1200m) and increase the maximum number of connected nodes up to 128, with a special circuitry, EX-9510/A is able to automatically detect the data flow and switch the direction of the data lines accordingly, “Auto baud rate detector” enables EX-9510/A to automatically configure RS-422(EX9510A)/485 signals to any baud rate without external switch setting, build in Opto-isolations on EX-9510/A provides 3000VDC of isolation to protect the host computer from ground loops and destructive voltage spikes on the RS-422(EX9510A)/485 data lines, EX-9510 also offers internal surge-protection on the data lines, Internal high-speed transient suppressors on each data line protect the module from dangerous voltages levels or spikes, Features:, automatic internal RS-422(EX9510A)/485 bus supervision, No external flow control signals required for RS-485, Minimum 3000VDC isolation protection, Transient suppression on RS-485 data lines, Supported baud rate up to 115.2Kbps, Reach distance up to 4000 feet (1200m), Reserved space for termination resistors (R8,R9), Power and data flow indicator for troubleshooting, Power requirement: +10V to +30VDC, Mounts easily on DIN-rail or panel, Specifications:, Power requirement: Unregulated +10 to +30VDC with protection from power reversals, Case: ABS with captive mounting hardware, Accessories (Supplied): NYLON DIN-rail Mounting Adapter SECC Panel Mounting Bracket, Plug-in screw terminal wiring: Accepts AWG 1-#12 to #22 (0.5 to 2.5mm) wires, Supported baud rate (bps): 1200, 2400, 4800, 9600, 19.2K, 38.4K, 57.6K, 115.2K, Isolation voltage: 3000VDC, RS-422/RS-485 connector: plug-in screw terminal, Power consumption: 2.2W, Operating temperature: -25?~75?, Storage temperature: -40?~85?, Humidity: 5~95%, non-condensing

Hersteller: TOPSCCC

Kategorie: Repeater RS485

EX-9510/A repeater boosts the RS-422(EX9510A)/485 signals to extend the reach distance up to 4000 ft (1200m) and increase the maximum number of connected nodes up to 128, with a special circuitry, EX-9510/A is able to automatically detect the data flow and switch the direction of the data lines accordingly, “Auto baud rate detector” enables EX-9510/A to automatically configure RS-422(EX9510A)/485 signals to any baud rate without external switch setting, build in Opto-isolations on EX-9510/A provides 3000VDC of isolation to protect the host computer from ground loops and destructive voltage spikes on the RS-422(EX9510A)/485 data lines, EX-9510 also offers internal surge-protection on the data lines, Internal high-speed transient suppressors on each data line protect the module from dangerous voltages levels or spikes, Features:, automatic internal RS-422(EX9510A)/485 bus supervision, No external flow control signals required for RS-485, Minimum 3000VDC isolation protection, Transient suppression on RS-485 data lines, Supported baud rate up to 115.2Kbps, Reach distance up to 4000 feet (1200m), Reserved space for termination resistors (R8,R9), Power and data flow indicator for troubleshooting, Power requirement: +10V to +30VDC, Mounts easily on DIN-rail or panel, Specifications:, Power requirement: Unregulated +10 to +30VDC with protection from power reversals, Case: ABS with captive mounting hardware, Accessories (Supplied): NYLON DIN-rail Mounting Adapter SECC Panel Mounting Bracket, Plug-in screw terminal wiring: Accepts AWG 1-#12 to #22 (0.5 to 2.5mm) wires, Supported baud rate (bps): 1200, 2400, 4800, 9600, 19.2K, 38.4K, 57.6K, 115.2K, Isolation voltage: 3000VDC, RS-422/RS-485 connector: plug-in screw terminal, Power consumption: 2.2W, Operating temperature: -25?~75?, Storage temperature: -40?~85?, Humidity: 5~95%, non-condensing

Hersteller: TOPSCCC

Kategorie: Repeater RS485

- **RS-232 to RS-485 Conversion:** Seamlessly converts RS-232 signals to RS-485 differential signals, allowing communication between devices using different serial standards. - **Galvanic Isolation:** The RS-232 input is electrically isolated, protecting connected equipment from ground loops, surges, and electrical noise. - **Automatic Baud Rate Detection:** The converter automatically detects and adjusts to the baud rate of the connected RS-232 device, simplifying setup and ensuring compatibility with a wide range of communication speeds. - **Auto Flow Control:** Intelligent direction control automatically manages data transmission and reception on the RS-485 bus without requiring manual RTS signal handling. - **Extended Communication Range:** Supports transmission distances up to **1200 meters (3937 feet)** over RS-485 cabling. - **Network Expansion Capability:** When used with the Autopro EX9510 RS-485 repeater, the communication range can be extended by an additional 1200 meters per segment. - **Multi-Drop Network Support:** Enables control and communication with up to **256 devices** on a single RS-485 network. - **Extended Temperature Operation:** Designed for industrial environments with an operating temperature range of **–25°C to +75°C**. - **Flexible Power Options:** - Standard EX9520: **10 VDC to 30 VDC** power input range. - EX9520+: **9 VDC to 48 VDC** extended power input range for broader compatibility with industrial power systems. - **Mounting Flexibility:** Includes both **DIN rail (cap-rail)** and **wall-mount** options for versatile installation in control cabinets or field enclosures. - **RS-232 Bridge Functionality:** Two EX9520 units can be paired to create an RS-232 bridge over an RS-485 link, extending RS-232 communication distance from a few meters to up to 1200 meters. - **Industrial-Grade Design:** Rugged construction suitable for harsh environments, ensuring stable operation under vibration, temperature variation, and electrical interference.

Hersteller: TOPSCCC

Kategorie: Converter

- **RS-232 to RS-422/RS-485 Conversion:** Enables seamless communication between RS-232 devices and RS-422/RS-485 networks. - **Galvanic Isolation:** The RS-232 input is isolated to protect connected equipment from ground loops, voltage spikes, and electrical noise. - **Automatic Baud Rate Detection:** The converter automatically recognizes and adjusts to the baud rate of the connected RS-232 device, simplifying setup and ensuring compatibility with a wide range of serial devices. - **Auto Flow Control:** Intelligent direction control automatically manages data transmission and reception without requiring additional handshaking signals. - **Full-Duplex RS-422 Support:** Allows simultaneous two-way communication for RS-422 networks, improving data throughput and reliability. - **Extended Temperature Range:** Designed for industrial environments, the EX9520A operates reliably between **-25°C and +75°C**, ensuring stable performance in both indoor and outdoor installations. - **Long-Distance Communication:** Supports data transmission distances up to **1200 meters** over RS-485 networks, significantly extending the communication range compared to standard RS-232 connections. - **Flexible Mounting Options:** Includes both **DIN rail (cap-rail)** and **wall-mount** brackets, allowing versatile installation in control cabinets or on flat surfaces. - **Optional Power Range Variant:** The EX9520A+ model variant supports a wider power input range of **9–48 VDC**, compared to the EX9520A’s **10–30 VDC** input range. - **Network Expansion Capability:** Can be used in conjunction with RS-485 repeaters to further extend network range or to create RS-232 bridges over RS-485 links. - **Industrial-Grade Design:** Rugged construction suitable for harsh environments, ensuring long-term reliability and minimal maintenance.

Hersteller: TOPSCCC

Kategorie: Converter

- **RS-232 to RS-422/RS-485 Conversion:** Enables seamless communication between RS-232 devices (such as PCs, PLCs, or controllers) and RS-422/RS-485 networks. - **Electrical Isolation:** The RS-422/RS-485 interface is fully isolated from the RS-232 side, protecting connected equipment from ground loops, surges, and electrical noise. - **Automatic Baud Rate Detection:** The converter automatically detects and adapts to the baud rate of the connected RS-232 device, simplifying setup and ensuring compatibility with a wide range of communication speeds. - **Auto Flow Control:** Intelligent direction control automatically manages data flow between transmit and receive modes, eliminating the need for manual configuration or software-based control signals. - **Extended Communication Range:** Supports data transmission distances up to **1200 meters** over RS-485 networks, significantly extending the reach of serial communication compared to standard RS-232 connections. - **Multi-Drop Network Capability:** In RS-485 mode, the converter allows connection and control of up to **256 devices** on a single network bus. - **Flexible Power Options:** Standard model operates from **10V to 30V DC**, while the **EX9520AR+** variant supports a wider input range of **9V to 48V DC** for enhanced installation flexibility. - **Extended Temperature Range:** Designed for industrial environments with an operating temperature range of **–25°C to +75°C**, ensuring stable performance in harsh conditions. - **Mounting Options:** Includes both **DIN rail (cap-rail)** and **wall-mount** brackets for versatile installation in control cabinets or equipment enclosures. - **Bridge Functionality:** Two EX9520AR units can be used to create an **RS-232 bridge** over an RS-485 link, extending RS-232 communication distances up to 1200 meters. - **Network Expansion:** Compatible with RS-485 repeaters for further extending network range or segmenting large installations.

Hersteller: TOPSCCC

Kategorie: Converter

- **RS-232 to RS-485 Conversion:** Enables direct communication between RS-232 devices (e.g., PCs, PLCs, controllers) and RS-485 networks. - **Isolated RS-422/RS-485 Interface:** Provides electrical isolation between RS-232 and RS-485 sides, protecting connected equipment from ground loops, surges, and electrical noise. - **Automatic Baud Rate Detection:** The converter automatically detects and adjusts to the baud rate of the connected RS-232 device, simplifying setup and ensuring compatibility with a wide range of communication speeds. - **Auto Flow Control:** Supports automatic direction control for RS-485 data transmission, eliminating the need for manual RTS signal handling. - **Extended Communication Range:** Supports RS-485 communication distances up to 1200 meters (approximately 4000 feet), allowing long-distance data transmission in industrial networks. - **High Device Capacity:** Enables control and communication with up to 256 devices on a single RS-485 bus. - **Extended Temperature Range:** Designed for operation in harsh environments, with a temperature range from -25°C to +75°C. - **Flexible Power Options:** Standard EX9520R operates on 10–30 VDC; the EX9520R+ variant supports a wider input range of 9–48 VDC for enhanced flexibility. - **Mounting Flexibility:** Includes both DIN rail (cap-rail) and wall-mounting options for easy installation in control cabinets or equipment enclosures. - **Network Expansion Capability:** Can be used with RS-485 repeaters to extend network range or with a second converter to create an RS-232 bridge over RS-485. - **Industrial-Grade Reliability:** Built for continuous operation in automation, process control, and data acquisition systems.

Hersteller: TOPSCCC

Kategorie: Converter

- **Triple Interface Support:** Provides one serial port configurable as RS-232, RS-422, or RS-485 without jumpers (auto-switching). - **Full-Duplex RS-232/RS-422:** Supports simultaneous two-way communication for high-performance data exchange. - **RS-232 Handshake Signals:** Includes RTS (Request to Send) and CTS (Clear to Send) lines for hardware flow control. - **Automatic Direction Control:** RS-485 communication direction is automatically managed by the converter, eliminating the need for software control. - **High Isolation Protection:** 3000 VDC optical isolation between USB and serial interfaces protects against ground loops and voltage spikes. - **Transient Surge Protection:** Built-in high-speed transient suppressors safeguard data lines from electrical surges. - **Automatic Baud Rate Detection:** Supports baud rates from 300 bps up to 115.2 Kbps with automatic detection and configuration. - **Wide Operating Temperature Range:** Reliable operation from -25°C to +75°C, suitable for industrial environments. - **Extended Communication Range:** RS-422/RS-485 communication distance up to 1200 meters (1.2 km). - **Driver Compatibility:** Native driver support for Windows 95/98/ME/2000/XP/10 and Linux operating systems. - **Self-Powered via USB:** Draws power directly from the USB bus, requiring no external power supply. - **Status Indicators:** Power and data flow LEDs for easy troubleshooting and monitoring. - **Flexible Mounting Options:** Includes DIN-rail and panel mounting accessories for versatile installation. - **Compact and Durable Design:** Housed in an ABS enclosure with captive mounting hardware for secure industrial deployment.

Hersteller: TOPSCCC

Kategorie: USB Converter

- **Dual Protocol Support:** Fully supports both RS-422 (full-duplex) and RS-485 (half-duplex) communication standards. - **Automatic Configuration:** Jumperless auto-switching between RS-422 and RS-485 modes, simplifying setup and reducing configuration errors. - **Hardware Handshake:** RS-422 mode supports RTS (Request to Send) and CTS (Clear to Send) handshake signals for reliable data flow control. - **Optical Isolation:** Provides 3000 VDC isolation between USB and serial interfaces, protecting the host system from ground loops and voltage spikes. - **Surge Protection:** Integrated transient suppressors safeguard data lines from high-voltage transients and electrostatic discharge. - **Automatic Baud Rate Detection:** Supports baud rates from 300 bps up to 115.2 Kbps with automatic detection and configuration. - **Auto Direction Flow Control:** Automatically manages data direction in RS-485 mode, ensuring transparent operation for half-duplex communication. - **Wide Temperature Range:** Operates reliably from -25°C to +75°C, suitable for harsh industrial environments. - **Power and Data Indicators:** LED indicators for power and data transmission/reception simplify troubleshooting and monitoring. - **DIN-Rail and Panel Mounting:** Includes mounting accessories for flexible installation in control cabinets or on panels. - **Driver Compatibility:** Supports Windows 95/98/ME/2000/XP and Linux operating systems. - **Self-Powered:** Draws power directly from the USB bus, eliminating the need for an external power supply.

Hersteller: TOPSCCC

Kategorie: USB Converter

- **Multi-channel RTD Input:** Six independent analog input channels for RTD sensors, each configurable for 2-, 3-, or 4-wire connection. - **High Resolution:** 16-bit analog-to-digital conversion ensures precise temperature measurement. - **Wide Sensor Compatibility:** Supports multiple RTD types including Pt100 (α=0.00385 and α=0.003916), Pt1000, Cu100 (α=0.00421 and α=0.00427), Cu1000, and Ni120. - **Open Loop Detection:** Built-in open-circuit detection for sensor fault identification. - **Individual Channel Configuration:** Each channel can be configured independently for sensor type and wiring mode. - **Noise Rejection:** 60 Hz (and optionally 50 Hz) noise rejection filter for stable readings in industrial environments. - **Communication Interface:** RS-485, 2-wire, supporting baud rates from 1200 to 115200 bps. - **Galvanic Isolation:** Input and output sections are galvanically isolated to prevent ground loops and electrical interference. - **Flexible Power Supply:** Operates from 10 to 30 VDC, suitable for field and control cabinet installations. - **Software and Manual Configuration:** Can be configured manually or via supplied configuration software. - **Parity Options:** Supports non, odd, or even parity for serial communication. - **Temperature Range:** Designed for operation in wide ambient temperature conditions typical of industrial environments. - **Compact DIN-rail Mountable Design:** Suitable for distributed I/O systems and modular automation setups.

Hersteller: TOPSCCC

Kategorie: Module AD In

- **Eight Analog Input Channels:** Supports 8 differential inputs or a combination of 6 differential and 2 single-ended channels. - **High Resolution:** 16-bit analog-to-digital conversion for precise signal measurement (12-bit in fast mode for EX9017F variants). - **Multiple Input Ranges:** Configurable for voltage ranges of ±150 mV, ±500 mV, ±1 V, ±5 V, and ±10 V, or current range of ±20 mA (using external 125 Ω resistor). - **Galvanic Isolation:** Input and output channels are galvanically isolated to prevent ground loops and ensure signal integrity in noisy environments. - **RS-485 Communication:** Two-wire serial interface supporting multiple baud rates from 1200 to 115200 bps. - **Sampling Rate:** 10 samples per second (10 Hz) standard; 50 Hz available in fast mode variants. - **High Accuracy:** ±0.1% of full-scale range with excellent temperature stability. - **Noise Rejection:** Common Mode Rejection (CMR) of 150 dB and Normal Mode Rejection (NMR) of 100 dB at 50/60 Hz. - **Wide Power Supply Range:** Operates from +10 VDC to +30 VDC. - **Dual Watchdog System:** Hardware and software watchdogs ensure continuous operation and system reliability. - **EEPROM Configuration Storage:** Retains settings such as address, baud rate, and input type even after power loss. - **INIT* Mode:** Simplified configuration recovery mode accessible via rear switch or terminal connection. - **Software Configurable:** Supports manual setup or configuration via command set through RS-485. - **Industrial-Grade Design:** Wide operating temperature range and robust construction for harsh environments.

Hersteller: TOPSCCC

Kategorie: Module AD In

- **8 Analog Input Channels:** Supports up to eight analog input signals, configurable as 8 differential or 6 differential + 2 single-ended channels. - **12-bit Resolution (Fast Mode):** Provides 12-bit analog-to-digital conversion accuracy, optimized for faster sampling rates compared to the 16-bit standard EX9017 model. - **Multiple Input Ranges:** Accepts voltage inputs of ±150 mV, ±500 mV, ±1 V, ±5 V, and ±10 V, as well as current inputs of ±20 mA (via external 125 Ω shunt resistor). - **High Sampling Rate:** Capable of up to 50 Hz total sampling rate, suitable for dynamic signal monitoring. - **RS-485 Communication Interface:** Two-wire serial interface supporting multiple baud rates from 1200 to 115200 bps, compatible with Modbus RTU and ASCII-based command protocols. - **Galvanic Isolation:** Input and output circuits are electrically isolated to prevent ground loops and protect against electrical interference. - **Wide Power Supply Range:** Operates from +10 VDC to +30 VDC, allowing flexible integration into various control systems. - **High Accuracy and Stability:** ±0.1% accuracy, 0.5 µV/°C zero drift, and 25 ppm/°C span drift ensure precise long-term measurements. - **Noise Rejection:** Excellent Common Mode Rejection Ratio (CMR) of 150 dB and Normal Mode Rejection (NMR) of 100 dB at 50/60 Hz. - **Dual Watchdog System:** Incorporates both module and host watchdogs for enhanced reliability and fault recovery. - **EEPROM Configuration Storage:** Retains configuration parameters such as address, baud rate, and input type even after power loss. - **Software and Manual Configuration:** Can be configured via serial commands or using supplied configuration software. - **INIT* Mode:** Simplifies recovery and reconfiguration by resetting communication parameters to default values.

Hersteller: TOPSCCC

Kategorie: Module AD In

- **8 Analog Input Channels:** Configurable as 8 differential or 6 differential + 2 single-ended inputs. - **High-Speed Sampling:** Up to **60 Hz sampling rate** (10/50 Hz selectable modes). - **12-bit Resolution (Fast Mode):** Provides precise analog-to-digital conversion for accurate signal measurement. - **Wide Input Range:** Supports multiple voltage and current ranges: - Voltage: ±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V - Current: ±20 mA (via external 125 Ω precision resistor) - **Galvanic Isolation:** Complete isolation between input channels and communication/power circuits to prevent ground loops and interference. - **Overvoltage Protection:** Up to **240 Vrms** between Vin+ and Vin–, ensuring safety against transient surges and wiring faults. - **RS-485 Communication Interface:** 2-wire half-duplex serial interface supporting multiple baud rates up to **115.2 kbps**. - **Wide Power Supply Range:** Operates from **+10 V to +30 V DC**, suitable for industrial power systems. - **High Accuracy and Stability:** - Accuracy: ±0.1% of full scale - Zero Drift: 0.5 µV/°C - Span Drift: 25 ppm/°C - **Noise Rejection:** - Common Mode Rejection (CMR): 150 dB @ 50/60 Hz - Normal Mode Rejection (NMR): 100 dB @ 50/60 Hz - **Dual Watchdog System:** Hardware (module) and software (host) watchdogs ensure continuous operation and system reliability. - **EEPROM Configuration Storage:** Retains settings such as address, baud rate, and input type even after power loss. - **INIT* Mode:** Simplified recovery and reconfiguration mode for forgotten or lost settings. - **Software Configurable:** Supports manual setup or configuration via supplied software commands. - **Compact and Rugged Design:** Suitable for DIN-rail or panel mounting in industrial environments.

Hersteller: TOPSCCC

Kategorie: Module AD In

- **Eight Analog Input Channels:** Supports 8 fully isolated analog input channels configurable as differential or mixed (6 differential + 2 single-ended). - **High Resolution:** 16-bit analog-to-digital conversion for precise signal measurement. - **Wide Input Range:** Configurable for multiple voltage and current ranges: ±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V, and ±20 mA (with external 125 Ω resistor). - **Electrical Isolation:** 240 Vrms isolation between Vin+ and Vin–, providing protection against surges and ground loops. - **RS-485 Communication:** Two-wire serial interface supporting baud rates from 1200 bps up to 115200 bps. - **Galvanic Isolation:** Complete isolation between communication, power, and analog input sections for enhanced reliability. - **Sampling Rate:** 10 samples per second (10 Hz) with a 15.7 Hz bandwidth. - **High Accuracy:** ±0.1% of full-scale range with excellent temperature stability (zero drift 0.5 µV/°C, span drift 25 ppm/°C). - **Noise Rejection:** Common Mode Rejection (CMR) of 150 dB and Normal Mode Rejection (NMR) of 100 dB at 50/60 Hz. - **Flexible Configuration:** Manual or software-based configuration via RS-485 commands; EEPROM stores all settings. - **Dual Watchdog System:** Hardware (module) and software (host) watchdogs ensure continuous operation and fail-safe behavior. - **Wide Power Supply Range:** Operates from +10 VDC to +30 VDC. - **Industrial-Grade Design:** Suitable for harsh environments with wide operating temperature range and surge protection. - **Calibration Support:** Built-in calibration commands for zero and span adjustment, ensuring long-term measurement accuracy. - **INIT* Mode:** Dedicated configuration mode for resetting or reprogramming module parameters. - **Compact Modular Form Factor:** Designed for DIN-rail or panel mounting in distributed control systems.

Hersteller: TOPSCCC

Kategorie: Module AD In

- **8 Differential Analog Input Channels:** Each channel supports differential measurement for improved noise immunity and accuracy. - **High Resolution:** 16-bit A/D conversion ensures precise signal acquisition. - **Thermocouple Compatibility:** Supports standard thermocouple types J, K, T, E, R, S, B, and N. - **Multi-Range Analog Input:** Configurable for voltage ranges of ±15mV, ±50mV, ±100mV, ±500mV, ±1V, ±2.5V, or current ±20mA (via external 125Ω resistor). - **Sampling Rate:** 10 samples per second (10 Hz) with a bandwidth of 15.7 Hz. - **High Accuracy:** ±0.1% of full scale with low drift characteristics (Zero Drift: 0.5 μV/°C, Span Drift: 25 ppm/°C). - **Galvanic Isolation:** Input and output circuits are isolated to prevent ground loops and enhance reliability. - **RS-485 Communication Interface:** Two-wire serial communication supporting baud rates from 1200 to 115200 bps. - **Modbus RTU Support (EX9018-M):** Enables easy integration with PLCs, SCADA, and HMI systems. - **Thermocouple Break Line Detection (EX9018BL / EX9018BL-M):** Detects open thermocouple circuits for enhanced safety and diagnostics. - **Wide Power Supply Range:** Operates from +10V to +30V DC. - **Cold Junction Compensation (CJC):** Built-in temperature compensation for accurate thermocouple readings. - **Dual Watchdog System:** Hardware and host watchdogs ensure continuous operation and system reliability. - **EEPROM Configuration Storage:** Retains settings such as address, baud rate, and input type even after power loss. - **INIT* Mode:** Simplified configuration recovery mode accessible via rear switch or terminal connection. - **Compact and Robust Design:** Suitable for industrial environments with wide operating temperature tolerance.

Hersteller: TOPSCCC

Kategorie: Module AD In

- **Multi-Sensor Input Support:** Compatible with thermocouple types J, K, T, E, R, S, B, and N for wide-ranging temperature measurement applications. - **High-Resolution Conversion:** 16-bit analog-to-digital conversion ensures high precision and stability. - **8 Differential Input Channels:** Each channel is fully differential, minimizing noise and interference. - **Wide Input Range:** Supports voltage inputs from ±15 mV to ±2.5 V and current inputs of ±20 mA (with external 125 Ω resistor). - **Open-Loop (Break-Line) Detection:** Detects thermocouple disconnection or wiring faults, ensuring reliable monitoring. - **Galvanic Isolation:** Input and output circuits are isolated to prevent ground loops and enhance signal integrity. - **RS-485 Communication Interface:** Two-wire serial interface supporting baud rates from 1200 to 115200 bps. - **Flexible Configuration:** Configurable via ASCII commands or supplied software; supports INIT* mode for resetting and reconfiguration. - **Cold Junction Compensation (CJC):** Built-in temperature compensation for accurate thermocouple readings. - **Dual Watchdog System:** Hardware and host watchdogs ensure continuous operation and system reliability. - **Wide Power Supply Range:** Operates from +10 VDC to +30 VDC, suitable for industrial power systems. - **Compact and Modular Design:** DIN-rail mountable, designed for distributed I/O systems. - **High Noise Rejection:** CMR of 150 dB and NMR of 100 dB at 50/60 Hz for superior noise immunity. - **Temperature Stability:** Zero drift of 0.5 μV/°C and span drift of 25 ppm/°C. - **Sampling Rate:** 10 samples per second (10 Hz) with a bandwidth of 15.7 Hz. - **Firmware and Protocol Flexibility:** Supports ASCII command set and Modbus RTU protocol (in BL-M variant).

Hersteller: TOPSCCC

Kategorie: Module AD In

- **8 Differential Analog Input Channels:** Each channel can be configured independently for thermocouple, voltage, or current input. - **High Resolution:** 16-bit A/D conversion ensures precise measurement and low noise. - **Wide Input Range:** Supports multiple voltage ranges (±15 mV to ±2.5 V), current range (±20 mA with external resistor), and thermocouple types J, K, T, E, R, S, B, and N. - **Individual Channel Configuration:** Each input channel can be set to a different input type or range (EX9019/EX9019-M only). - **Open Loop (Burnout) Detection:** Detects thermocouple disconnection or sensor failure. - **Galvanic Isolation:** Input and output circuits are isolated to prevent ground loops and electrical interference. - **RS-485 Communication:** Two-wire serial interface supporting baud rates from 1200 to 115200 bps. - **Modbus RTU Protocol (EX9019-M):** Compatible with standard Modbus RTU master devices such as PLCs, HMIs, and SCADA systems. - **Cold Junction Compensation (CJC):** Built-in temperature compensation for accurate thermocouple readings. - **Dual Watchdog System:** Hardware and host watchdogs ensure reliable operation and automatic recovery from communication or system faults. - **Wide Power Supply Range:** Operates from +10 VDC to +30 VDC. - **Compact and Rugged Design:** Suitable for DIN-rail or panel mounting in industrial environments. - **Software Configurable:** Supports configuration via ASCII commands or EX-9000 utility software. - **Firmware and Module Identification:** Built-in commands to read firmware version and module name.

Hersteller: TOPSCCC

Kategorie: Module AD In

- **3 Independent RTD Input Channels:** Supports simultaneous measurement from up to three RTD sensors. - **High Resolution and Accuracy:** 16-bit analog-to-digital conversion with ±0.1% accuracy ensures precise temperature readings. - **Wide RTD Compatibility:** Supports multiple RTD types including Pt100, Pt1000, Ni120, Cu100, Cu1000, and Cu50 with various α coefficients (0.00385, 0.003916, 0.00421, 0.00427, etc.). - **2-, 3-, and 4-Wire Connection Support:** Flexible wiring options for different RTD configurations to minimize lead resistance errors. - **Built-in Open Loop Detection:** Automatically detects broken or disconnected RTD lines. - **Offset Function and 60Hz Noise Rejection:** Software-configurable offset adjustment and noise filtering for stable readings in electrically noisy environments. - **Galvanic Isolation:** 3000 VDC inter-module isolation between input, output, and power circuits for enhanced safety and signal integrity. - **RS-485 Communication Interface:** Supports Modbus-like ASCII command protocol for integration with PLCs, SCADA, and PC-based control systems. - **Configurable via Software or Manual Commands:** Can be configured using the EX-9000 Utility software or ASCII command set. - **Wide Operating Temperature Range:** Reliable operation from -25°C to +75°C. - **Compact, Industrial-Grade Design:** Rugged construction suitable for DIN-rail or panel mounting in harsh environments. - **Low Power Consumption:** Operates from a 10–30 VDC supply with typical consumption of 1.0 W. - **Firmware and Configuration Read/Write Support:** Allows reading of firmware version, module name, and configuration parameters via serial commands.

Hersteller: TOPSCCC

Kategorie: Module AD In

- **3 Independent Analog Input Channels:** Each channel can be configured individually for different RTD types and wiring modes (2-, 3-, or 4-wire). - **High Resolution and Accuracy:** 16-bit A/D conversion with ±0.1% accuracy ensures precise temperature measurement. - **Wide RTD Compatibility:** Supports Pt100, Pt1000, Ni120, Cu100, Cu1000, and Cu50 sensors with various α coefficients (0.00385, 0.003916, 0.00421, 0.00427). - **Open Loop (Break Line) Detection:** Automatically detects sensor disconnection or wiring faults. - **Galvanic Isolation:** 3000 VDC inter-module isolation protects against electrical interference and ground loops. - **Configurable Sampling Rate:** 15 samples per second (15 Hz bandwidth) for stable and responsive readings. - **60 Hz Noise Rejection:** Built-in filter for power-line noise suppression. - **RS-485 Communication Interface:** Supports Modbus/ASCII protocol for integration with PLCs, SCADA, and data acquisition systems. - **Flexible Power Supply:** Operates from +10 to +30 VDC with low power consumption (~1.0 W). - **Wide Operating Temperature Range:** -25°C to +75°C for industrial environments. - **Offset Adjustment:** Individual channel offset calibration via EX-9000 Utility software. - **Manual or Software Configuration:** Parameters can be set via serial commands or configuration utility. - **Individual Channel Configuration (P version):** Each channel can be assigned a unique RTD type and range, unlike the standard EX9033 model.

Hersteller: TOPSCCC

Kategorie: Module AD In

- **6 Analog Input Channels:** Each channel supports RTD sensors for temperature measurement. - **High Resolution:** 16-bit analog-to-digital conversion ensures precise temperature readings. - **Sampling Rate:** 12 samples per second (12 Hz) for stable and accurate data acquisition. - **Wide RTD Compatibility:** Supports Pt100, Pt1000, Ni120, Cu100, Cu1000, and Cu50 sensors with various α coefficients (0.00385, 0.003916, 0.00421, 0.00427, etc.). - **2/3/4-Wire RTD Support:** Flexible wiring options for different installation requirements. - **Open Loop (Break Line) Detection:** Automatically detects sensor disconnection or wiring faults. - **Offset Function:** Allows per-channel offset adjustment via the EX-9000 Utility software. - **60 Hz Noise Rejection:** Built-in digital filtering for power line interference suppression. - **3000 VDC Isolation:** Galvanic isolation between channels and communication interface for safety and noise immunity. - **RS-485 Communication Interface:** Supports Modbus-like ASCII command set for integration into distributed control systems. - **Wide Power Supply Range:** Operates from +10 to +30 VDC, suitable for industrial power systems. - **Rugged Design:** Operates reliably in harsh environments with wide temperature tolerance. - **Manual or Software Configuration:** Parameters can be set via commands or configuration utility. - **Compact Form Factor:** Designed for DIN-rail or panel mounting in control cabinets.

Hersteller: TOPSCCC

Kategorie: Module AD In

The EX9036P Analog In 16 bit module for RTD excels at use for temperature measurement with a resistance temperature detector, The Analog In 16 bit module has 10 Hz sampling rate as well as a built-in open-loop detection, Each channel of the Analog In RS485 module can be configured seperately and it may be operated in a wide temperature range, Features: 6 input channels, support all popular resistive thermometer, individual channel configuration, break-line detection, output as RS485-interface, in- and output galvanically isolated, manual configuration or with supplied software, power supply 10 - 30VDC, Supported thermometers: Pt100 a=0.00385 Pt100 a=0.003916 Pt1000 a=0.00385 Cu100 a=0.00421 Cu100 a=0.00427 Cu1000 a=0.00421 Ni120

Hersteller: TOPSCCC

Kategorie: Module AD In

- **Single Analog Output Channel:** Provides one analog output channel configurable for voltage or current output modes. - **12-bit Resolution:** Ensures fine output granularity and high signal accuracy for industrial control applications. - **Output Range Flexibility:** Supports voltage output from 0–10 VDC and current output ranges of 0–20 mA or 4–20 mA. - **RS485 Communication Interface:** Fully compatible with standard RS485 networks, enabling multi-drop communication and long-distance data transmission. - **Wide Operating Temperature Range:** Designed for reliable operation in extended industrial temperature environments. - **Dual Watchdog Timer (WDT):** Provides system reliability by monitoring both host and module operation, ensuring safe fallback states in case of communication failure. - **Selectable Power Source:** Internal power (default) supports up to 500 Ω load; external 24 V power option supports up to 1050 Ω load. - **Programmable Slew Rate Control:** Allows smooth, controlled output transitions to prevent abrupt signal changes that could affect sensitive equipment. - **Safe and Power-On Values:** Configurable safe-state and power-on output values ensure predictable behavior during startup or communication loss. - **Current Readback Function:** Enables monitoring of actual output current for diagnostic and verification purposes. - **Low Power Consumption:** Typical power consumption of 2 W, suitable for distributed I/O systems. - **Calibration and Configuration Commands:** Comprehensive command set for calibration, configuration, and monitoring via RS485 communication.

Hersteller: TOPSCCC

Kategorie: Module AD Out

- **High Resolution:** 16-bit digital-to-analog conversion for precise output control. - **Single Analog Output Channel:** Supports one configurable output channel for voltage or current signals. - **Output Range Flexibility:** Selectable output ranges of 0–10 VDC, 0–20 mA, or 4–20 mA. - **RS-485 Communication Interface:** Fully compatible with standard RS-485 networks using ASCII command protocol. - **Wide Operating Temperature Range:** Designed for industrial environments with extended temperature tolerance. - **Dual Watchdog Timer (WDT):** Ensures system reliability by monitoring both host and module operation. - **Safe and Power-On Values:** Configurable safe-state and power-on output values for fail-safe operation. - **Internal or External Power Drive:** Internal power supports up to 500 Ω load; external 24 V supply supports up to 1050 Ω load. - **Programmable Slew Rate Control:** Adjustable output transition rate from immediate change to gradual ramping (0.0625 V/s to 512 V/s or equivalent current rates). - **Current Readback Function:** Integrated A/D converter for monitoring actual output current, enabling fault detection. - **Low Power Consumption:** Typical consumption of 2 W. - **Compact Modular Design:** Fits within the EX9000 series modular I/O system for distributed automation.

Hersteller: TOPSCCC

Kategorie: Module AD Out

- **Dual Isolated Analog Outputs:** Two independent, channel-to-channel isolated outputs for enhanced signal integrity and noise immunity. - **12-bit Resolution:** Provides fine analog signal granularity suitable for precision control applications. - **Flexible Output Ranges:** Supports voltage output (0–10 VDC) and current output (0–20 mA or 4–20 mA). - **RS-485 Communication Interface:** Enables multi-drop networking and long-distance communication in industrial environments. - **Wide Operating Temperature Range:** Designed for extended temperature operation, suitable for harsh industrial conditions. - **Programmable Slew Rate Control:** Allows smooth, controlled transitions between output values to prevent abrupt signal changes. - **Current Readback Function:** Integrated A/D converter enables real-time monitoring of output current for diagnostics and verification. - **Dual Watchdog Timers (WDT):** Ensures system reliability by monitoring both host communication and internal operation. - **Safe and Power-On Values:** Configurable default output states for power-up and communication failure conditions. - **Low Power Consumption:** Typical power usage of 2 W, minimizing system energy requirements. - **Flexible Power Options:** Can operate with internal power (up to 500 Ω load) or external 24 V supply (up to 1050 Ω load). - **Compact Modular Design:** Easily integrates into distributed control systems with minimal wiring complexity.

Hersteller: TOPSCCC

Kategorie: Module AD Out

- **Four Analog Output Channels:** Each channel can be independently configured for voltage or current output. - **High Resolution:** 14-bit digital-to-analog conversion ensures fine output granularity and precise signal generation. - **Multiple Output Ranges:** Supports ±10 V, ±5 V, 0–10 V, 0–5 V, 0–20 mA, and 4–20 mA ranges. - **RS-485 Communication Interface:** Fully compatible with standard RS-485 networks, allowing multi-drop communication and long-distance data transmission. - **Programmable Slew Rate Control:** Adjustable output transition rate from immediate change to gradual slopes up to 1024 V/s or 2048 mA/s, minimizing transient effects in sensitive systems. - **Dual Watchdog Timers:** Ensures reliable operation and automatic recovery in case of communication or host failure. - **Safe and Power-On Values:** Configurable default output states for power-up and communication failure conditions. - **Flexible Power Options:** Internal power mode supports up to 500 Ω load; external 24 V supply supports up to 1050 Ω load. - **Wide Operating Temperature Range:** Designed for industrial environments with extended temperature tolerance. - **Compact and Modular Design:** Fits within the EX9000 AIO modular system for scalable analog I/O expansion. - **Low Power Consumption:** Typical consumption of 2 W. - **Firmware and Configuration Commands:** Comprehensive command set for calibration, configuration, and diagnostics via serial interface.

Hersteller: TOPSCCC

Kategorie: Module AD Out

ExpertDAQ Digital Input module communicates via RS485 and are available with Modbus RTU, Within one RS485-network up to 256 modules may be controlled, Without a RS485 Repeater the maximum cable length is 1200m, The RS485 Digital IO module are sturdy, power saving and easy to use, The EX9041 has isolated inputs on 14 channels and was developed for use in a wide temperature range, Features: 14 digital inputs, all inputs isolated, extended temperature range, Digital Level 0:

Hersteller: TOPSCCC

Kategorie: Module AD DIO