SUCHEN SIE DIE PASSENDE
INDUSTRIELLE LÖSUNG?
Entdecken Sie Embedded-, Kommunikations- und Automatisierungslösungen für Ihre Anwendung.
IPS-2042FX-MM-SC
Industrial Lite-Managed Switch 2*100FX MM SC 4*100TX PoE PSE
416,00 EUR
inkl. Umsatzsteuer 495,04 EUR
- Redundant Ethernet Ring Technology:
Supports ORing redundancy with recovery time < 10 ms over 250 nodes, ensuring minimal downtime. Also supports RSTP/STP (IEEE 802.1w/D) for compatibility with standard redundancy protocols.
- Power over Ethernet (PoE) PSE Functionality:
Four 10/100Base‑T(X) RJ‑45 ports provide PoE power sourcing equipment (PSE) capability compliant with IEEE 802.3af, delivering up to 25 W per port to connected powered devices such as IP cameras, wireless access points, or VoIP phones.
- Dual Fiber Uplink Ports:
Two 100Base‑FX multi‑mode fiber ports (SC connectors) enable long‑distance data transmission and network segmentation, ideal for industrial backbones or remote node connections.
- Triple Redundant Power Inputs:
Equipped with three DC power inputs (two via 7‑pin terminal block, one via power jack) supporting 12–48 V DC (terminal) and 12–45 V DC (jack), ensuring uninterrupted operation even if one power source fails.
- Wide Operating Temperature Range:
Designed for extreme industrial environments, operating reliably from −40 °C to +70 °C.
- Rugged Industrial Design:
IP‑30 rated metal housing provides protection against dust and mechanical impact. Compact form factor suitable for DIN‑rail or panel mounting.
- Comprehensive Event Notification:
Supports Syslog, SNMP trap, and email alerts for system events, enabling proactive maintenance and remote monitoring.
- Centralized Management:
Configurable via web interface or ORing’s Windows‑based Open‑Vision utility for network‑wide monitoring, configuration, and diagnostics.
- High Immunity to Electrical Disturbances:
ESD protection up to 4 kV DC on Ethernet ports and surge protection up to 2000 V DC on power inputs.
- Low Power Consumption:
Typical power usage approximately 5 W, optimizing energy efficiency in distributed installations.
Supports ORing redundancy with recovery time < 10 ms over 250 nodes, ensuring minimal downtime. Also supports RSTP/STP (IEEE 802.1w/D) for compatibility with standard redundancy protocols.
- Power over Ethernet (PoE) PSE Functionality:
Four 10/100Base‑T(X) RJ‑45 ports provide PoE power sourcing equipment (PSE) capability compliant with IEEE 802.3af, delivering up to 25 W per port to connected powered devices such as IP cameras, wireless access points, or VoIP phones.
- Dual Fiber Uplink Ports:
Two 100Base‑FX multi‑mode fiber ports (SC connectors) enable long‑distance data transmission and network segmentation, ideal for industrial backbones or remote node connections.
- Triple Redundant Power Inputs:
Equipped with three DC power inputs (two via 7‑pin terminal block, one via power jack) supporting 12–48 V DC (terminal) and 12–45 V DC (jack), ensuring uninterrupted operation even if one power source fails.
- Wide Operating Temperature Range:
Designed for extreme industrial environments, operating reliably from −40 °C to +70 °C.
- Rugged Industrial Design:
IP‑30 rated metal housing provides protection against dust and mechanical impact. Compact form factor suitable for DIN‑rail or panel mounting.
- Comprehensive Event Notification:
Supports Syslog, SNMP trap, and email alerts for system events, enabling proactive maintenance and remote monitoring.
- Centralized Management:
Configurable via web interface or ORing’s Windows‑based Open‑Vision utility for network‑wide monitoring, configuration, and diagnostics.
- High Immunity to Electrical Disturbances:
ESD protection up to 4 kV DC on Ethernet ports and surge protection up to 2000 V DC on power inputs.
- Low Power Consumption:
Typical power usage approximately 5 W, optimizing energy efficiency in distributed installations.
Comprehensive Product Summary – IPS‑2042FX‑MM‑SC Industrial Lite‑Managed Switch
### 1. Product Overview
Product Name: Industrial Lite‑Managed Ethernet Switch
Model: IPS‑2042FX‑MM‑SC
Series: IPS‑2042FX Series (Lite‑Managed PoE Industrial Switches)
Article Number: IPS‑2042FX‑MM‑SC
Manufacturer: ORing Industrial Networking Corp.
The IPS‑2042FX‑MM‑SC is a rugged, lite‑managed industrial Ethernet switch designed for high‑reliability networking in harsh environments. It combines Power over Ethernet (PoE) capability with fiber uplink redundancy, offering four 10/100Base‑T(X) RJ‑45 ports with PoE PSE functionality and two 100Base‑FX multi‑mode fiber ports using SC connectors. The switch supports ORing’s proprietary O‑Ring redundancy technology, providing sub‑10 ms recovery time across up to 250 connected devices, ensuring continuous network operation for mission‑critical applications.
### 2. Key Features
- Redundant Ethernet Ring Technology:
Supports ORing redundancy with recovery time < 10 ms over 250 nodes, ensuring minimal downtime. Also supports RSTP/STP (IEEE 802.1w/D) for compatibility with standard redundancy protocols.
- Power over Ethernet (PoE) PSE Functionality:
Four 10/100Base‑T(X) RJ‑45 ports provide PoE power sourcing equipment (PSE) capability compliant with IEEE 802.3af, delivering up to 25 W per port to connected powered devices such as IP cameras, wireless access points, or VoIP phones.
- Dual Fiber Uplink Ports:
Two 100Base‑FX multi‑mode fiber ports (SC connectors) enable long‑distance data transmission and network segmentation, ideal for industrial backbones or remote node connections.
- Triple Redundant Power Inputs:
Equipped with three DC power inputs (two via 7‑pin terminal block, one via power jack) supporting 12–48 V DC (terminal) and 12–45 V DC (jack), ensuring uninterrupted operation even if one power source fails.
- Wide Operating Temperature Range:
Designed for extreme industrial environments, operating reliably from −40 °C to +70 °C.
- Rugged Industrial Design:
IP‑30 rated metal housing provides protection against dust and mechanical impact. Compact form factor suitable for DIN‑rail or panel mounting.
- Comprehensive Event Notification:
Supports Syslog, SNMP trap, and email alerts for system events, enabling proactive maintenance and remote monitoring.
- Centralized Management:
Configurable via web interface or ORing’s Windows‑based Open‑Vision utility for network‑wide monitoring, configuration, and diagnostics.
- High Immunity to Electrical Disturbances:
ESD protection up to 4 kV DC on Ethernet ports and surge protection up to 2000 V DC on power inputs.
- Low Power Consumption:
Typical power usage approximately 5 W, optimizing energy efficiency in distributed installations.
### 3. Technical Specifications
| Parameter | Specification |
|----------------|-------------------|
| Model | IPS‑2042FX‑MM‑SC |
| Ports | 4 × 10/100Base‑T(X) RJ‑45 (PoE PSE) + 2 × 100Base‑FX MM SC |
| PoE Standard | IEEE 802.3af PSE, up to 25 W per port |
| Fiber Type | Multi‑mode 100Base‑FX (SC connector) |
| Network Standards | IEEE 802.3 10Base‑T, IEEE 802.3u 100Base‑TX/FX, IEEE 802.3x Flow Control, IEEE 802.1w RSTP |
| Redundancy Protocols | ORing (< 10 ms recovery), RSTP/STP (IEEE 802.1w/D) |
| Management Interfaces | Web GUI, Open‑Vision Windows Utility, SNMP v1 |
| Event Notification | Syslog, Email, SNMP Trap |
| Power Inputs | Triple DC inputs: 12–48 V DC (terminal block), 12–45 V DC (power jack) |
| Power Consumption | Approx. 5 W (typical) |
| Protection | ESD 4 kV DC (Ethernet ports), Surge 2000 V DC (power) |
| Housing | IP‑30 metal enclosure |
| Mounting | DIN‑rail and panel mounting |
| Dimensions | 52 (W) × 106 (D) × 144 (H) mm |
| Weight | Approx. 0.9 kg (typical) |
| Operating Temperature | −40 °C to +70 °C |
| Storage Temperature | −40 °C to +85 °C (typical for series) |
| Humidity | 5 % to 95 % non‑condensing |
| Enclosure Rating | IP‑30 industrial grade |
| Warranty | 5 years |
### 4. Functionality
The IPS‑2042FX‑MM‑SC functions as a lite‑managed Ethernet switch with integrated PoE power sourcing and fiber uplink redundancy. It bridges copper and fiber networks, providing both data and power transmission over standard Cat5e/6 cables.
Operational Concept:
- PoE Power Delivery: Each of the four RJ‑45 ports can supply up to 25 W of DC power to connected devices, eliminating the need for separate power wiring.
- Fiber Uplinks: The two 100Base‑FX multi‑mode SC ports enable long‑distance backbone connections (up to 2 km typical for multi‑mode fiber).
- Redundant Networking: ORing’s proprietary O‑Ring technology ensures network self‑healing within 10 ms in case of link failure.
- Management: Configuration and monitoring are accessible via a web interface or the Open‑Vision Windows utility, which provides topology visualization, event logging, and centralized control.
- Event Handling: The switch can generate alarms via Syslog, SNMP trap, or email notifications, allowing administrators to respond quickly to network anomalies.
Applications:
- Industrial automation and control systems
- Intelligent transportation systems (ITS)
- Surveillance networks with PoE IP cameras
- Power substations and utility monitoring
- Oil & gas and mining communications
- Factory floor and process control networks
Compatibility:
- Fully compatible with standard Ethernet devices (IEEE 802.3/802.3u)
- Supports integration with managed and unmanaged switches
- Works with ORing’s Open‑Vision and Open‑Vision Pro network management platforms
### 5. Components & Accessories
Included Items:
- IPS‑2042FX‑MM‑SC switch unit
- DIN‑rail mounting kit
- Terminal block for DC power input
- Quick installation guide and documentation
Optional Accessories:
- Panel mount brackets
- External DC power adapters (12–48 V DC)
- Fiber patch cords and SC connectors
- Open‑Vision software license (for advanced network management)
Connectors:
- RJ‑45 Ports: 4 × 10/100Base‑T(X) auto‑negotiation, auto‑MDI/MDI‑X
- Fiber Ports: 2 × 100Base‑FX multi‑mode SC connectors
- Power Input: 7‑pin terminal block and DC power jack
- Alarm Output: Relay contact for system failure notification (typical for series)
### 6. Installation & Setup
Requirements:
- DC power supply within 12–48 V DC range
- Proper grounding to ensure ESD protection
- DIN‑rail or panel mounting surface
Mounting Options:
- DIN‑Rail Mounting: Standard 35 mm DIN rail bracket included for quick installation in control cabinets.
- Panel Mounting: Optional brackets allow secure attachment to flat surfaces or equipment racks.
Configuration:
1. Connect DC power inputs to the terminal block or power jack.
2. Connect Ethernet devices to RJ‑45 ports and fiber uplinks to SC connectors.
3. Access the web interface via default IP address for initial setup.
4. Configure network parameters, PoE settings, and redundancy options through the web GUI or Open‑Vision utility.
5. Verify link status and redundancy operation using LED indicators and software monitoring.
LED Indicators:
- Power Status: Indicates active power inputs.
- Ring Master Indicator: Green LED flashes when operating in O‑Ring Master mode.
- Port Status: Link/activity and PoE status for each port.
### 7. Performance & Capabilities
- Switching Capacity: 1.2 Gbps (typical for 6‑port Fast Ethernet switch)
- Packet Forwarding Rate: ~0.9 Mpps (64‑byte packets)
- Latency: < 10 µs for 100 Mbps ports
- MAC Address Table: 2 K entries (typical for series)
- Buffer Memory: 1 Mbit (typical for series)
- PoE Power Budget: Up to 100 W total (25 W × 4 ports)
- Recovery Time: < 10 ms (O‑Ring redundancy)
- Power Efficiency: Low consumption (~5 W base load) with high PoE output efficiency.
- Reliability: MTBF > 300,000 hours (estimated for industrial grade components).
Limitations:
- Fast Ethernet (100 Mbps) only — no Gigabit uplinks.
- Lite‑managed feature set — basic management functions without advanced Layer 3 routing.
- PoE standard limited to IEEE 802.3af (not 802.3at or 802.3bt).
### 8. Standards & Compliance
Ethernet Standards:
- IEEE 802.3 10Base‑T
- IEEE 802.3u 100Base‑TX/FX
- IEEE 802.3x Flow Control
- IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
- IEEE 802.3af Power over Ethernet (PSE)
Redundancy Protocols:
- ORing (< 10 ms recovery time)
- RSTP/STP (IEEE 802.1w/D)
Management Protocols:
- SNMP v1
- Syslog, SMTP (email alerts), SNMP Trap
- Web GUI and Open‑Vision Windows Utility
Regulatory Compliance:
- CE: Conforms to European EMC and safety requirements.
- FCC: Part 15 Class A compliance for industrial environments.
- EN 60950: Safety standard for information technology equipment.
Environmental & Mechanical Standards:
- IP‑30 protection rating for industrial enclosures.
- ESD immunity 4 kV DC (Ethernet ports).
- Surge protection 2000 V DC (power inputs).
- Operating temperature −40 °C to +70 °C for extended industrial range.
### 9. Additional Information
Warranty:
5‑year limited hardware warranty covering manufacturing defects and component failures under normal operation.
Technical Support:
ORing provides lifetime technical support through email and online resources, including firmware updates and configuration guides.
Maintenance:
- Periodic inspection of power connections and fiber interfaces recommended.
- Firmware updates available via web interface or Open‑Vision utility.
- Diagnostic logs accessible through Syslog and SNMP for preventive maintenance.
Software Updates:
Firmware and Open‑Vision utility updates are available from ORing’s official support portal, ensuring compatibility with new network standards and security enhancements.
Reliability & Lifecycle:
The IPS‑2042FX‑MM‑SC is engineered for long‑term deployment in industrial automation and transportation systems, with a design lifecycle exceeding 10 years and component availability support for extended projects.
### Summary
The ORing IPS‑2042FX‑MM‑SC is a robust, lite‑managed industrial Ethernet switch that integrates PoE power delivery, fiber uplink redundancy, and advanced network management in a compact IP‑30 enclosure. Its combination of O‑Ring redundancy (< 10 ms recovery), triple redundant power inputs, and wide temperature tolerance makes it ideal for mission‑critical applications in industrial automation, transportation, and surveillance networks. With support for IEEE 802.3af PoE up to 25 W per port and dual 100Base‑FX fiber uplinks, the switch delivers both power and data reliably over long distances. Centralized management via web interface or Open‑Vision software simplifies configuration and monitoring across large‑scale industrial networks. Backed by a 5‑year warranty and compliance with CE, FCC, and EN60950 standards, the IPS‑2042FX‑MM‑SC offers a cost‑effective, high‑reliability solution for industrial Ethernet infrastructure.
### 1. Product Overview
Product Name: Industrial Lite‑Managed Ethernet Switch
Model: IPS‑2042FX‑MM‑SC
Series: IPS‑2042FX Series (Lite‑Managed PoE Industrial Switches)
Article Number: IPS‑2042FX‑MM‑SC
Manufacturer: ORing Industrial Networking Corp.
The IPS‑2042FX‑MM‑SC is a rugged, lite‑managed industrial Ethernet switch designed for high‑reliability networking in harsh environments. It combines Power over Ethernet (PoE) capability with fiber uplink redundancy, offering four 10/100Base‑T(X) RJ‑45 ports with PoE PSE functionality and two 100Base‑FX multi‑mode fiber ports using SC connectors. The switch supports ORing’s proprietary O‑Ring redundancy technology, providing sub‑10 ms recovery time across up to 250 connected devices, ensuring continuous network operation for mission‑critical applications.
### 2. Key Features
- Redundant Ethernet Ring Technology:
Supports ORing redundancy with recovery time < 10 ms over 250 nodes, ensuring minimal downtime. Also supports RSTP/STP (IEEE 802.1w/D) for compatibility with standard redundancy protocols.
- Power over Ethernet (PoE) PSE Functionality:
Four 10/100Base‑T(X) RJ‑45 ports provide PoE power sourcing equipment (PSE) capability compliant with IEEE 802.3af, delivering up to 25 W per port to connected powered devices such as IP cameras, wireless access points, or VoIP phones.
- Dual Fiber Uplink Ports:
Two 100Base‑FX multi‑mode fiber ports (SC connectors) enable long‑distance data transmission and network segmentation, ideal for industrial backbones or remote node connections.
- Triple Redundant Power Inputs:
Equipped with three DC power inputs (two via 7‑pin terminal block, one via power jack) supporting 12–48 V DC (terminal) and 12–45 V DC (jack), ensuring uninterrupted operation even if one power source fails.
- Wide Operating Temperature Range:
Designed for extreme industrial environments, operating reliably from −40 °C to +70 °C.
- Rugged Industrial Design:
IP‑30 rated metal housing provides protection against dust and mechanical impact. Compact form factor suitable for DIN‑rail or panel mounting.
- Comprehensive Event Notification:
Supports Syslog, SNMP trap, and email alerts for system events, enabling proactive maintenance and remote monitoring.
- Centralized Management:
Configurable via web interface or ORing’s Windows‑based Open‑Vision utility for network‑wide monitoring, configuration, and diagnostics.
- High Immunity to Electrical Disturbances:
ESD protection up to 4 kV DC on Ethernet ports and surge protection up to 2000 V DC on power inputs.
- Low Power Consumption:
Typical power usage approximately 5 W, optimizing energy efficiency in distributed installations.
### 3. Technical Specifications
| Parameter | Specification |
|----------------|-------------------|
| Model | IPS‑2042FX‑MM‑SC |
| Ports | 4 × 10/100Base‑T(X) RJ‑45 (PoE PSE) + 2 × 100Base‑FX MM SC |
| PoE Standard | IEEE 802.3af PSE, up to 25 W per port |
| Fiber Type | Multi‑mode 100Base‑FX (SC connector) |
| Network Standards | IEEE 802.3 10Base‑T, IEEE 802.3u 100Base‑TX/FX, IEEE 802.3x Flow Control, IEEE 802.1w RSTP |
| Redundancy Protocols | ORing (< 10 ms recovery), RSTP/STP (IEEE 802.1w/D) |
| Management Interfaces | Web GUI, Open‑Vision Windows Utility, SNMP v1 |
| Event Notification | Syslog, Email, SNMP Trap |
| Power Inputs | Triple DC inputs: 12–48 V DC (terminal block), 12–45 V DC (power jack) |
| Power Consumption | Approx. 5 W (typical) |
| Protection | ESD 4 kV DC (Ethernet ports), Surge 2000 V DC (power) |
| Housing | IP‑30 metal enclosure |
| Mounting | DIN‑rail and panel mounting |
| Dimensions | 52 (W) × 106 (D) × 144 (H) mm |
| Weight | Approx. 0.9 kg (typical) |
| Operating Temperature | −40 °C to +70 °C |
| Storage Temperature | −40 °C to +85 °C (typical for series) |
| Humidity | 5 % to 95 % non‑condensing |
| Enclosure Rating | IP‑30 industrial grade |
| Warranty | 5 years |
### 4. Functionality
The IPS‑2042FX‑MM‑SC functions as a lite‑managed Ethernet switch with integrated PoE power sourcing and fiber uplink redundancy. It bridges copper and fiber networks, providing both data and power transmission over standard Cat5e/6 cables.
Operational Concept:
- PoE Power Delivery: Each of the four RJ‑45 ports can supply up to 25 W of DC power to connected devices, eliminating the need for separate power wiring.
- Fiber Uplinks: The two 100Base‑FX multi‑mode SC ports enable long‑distance backbone connections (up to 2 km typical for multi‑mode fiber).
- Redundant Networking: ORing’s proprietary O‑Ring technology ensures network self‑healing within 10 ms in case of link failure.
- Management: Configuration and monitoring are accessible via a web interface or the Open‑Vision Windows utility, which provides topology visualization, event logging, and centralized control.
- Event Handling: The switch can generate alarms via Syslog, SNMP trap, or email notifications, allowing administrators to respond quickly to network anomalies.
Applications:
- Industrial automation and control systems
- Intelligent transportation systems (ITS)
- Surveillance networks with PoE IP cameras
- Power substations and utility monitoring
- Oil & gas and mining communications
- Factory floor and process control networks
Compatibility:
- Fully compatible with standard Ethernet devices (IEEE 802.3/802.3u)
- Supports integration with managed and unmanaged switches
- Works with ORing’s Open‑Vision and Open‑Vision Pro network management platforms
### 5. Components & Accessories
Included Items:
- IPS‑2042FX‑MM‑SC switch unit
- DIN‑rail mounting kit
- Terminal block for DC power input
- Quick installation guide and documentation
Optional Accessories:
- Panel mount brackets
- External DC power adapters (12–48 V DC)
- Fiber patch cords and SC connectors
- Open‑Vision software license (for advanced network management)
Connectors:
- RJ‑45 Ports: 4 × 10/100Base‑T(X) auto‑negotiation, auto‑MDI/MDI‑X
- Fiber Ports: 2 × 100Base‑FX multi‑mode SC connectors
- Power Input: 7‑pin terminal block and DC power jack
- Alarm Output: Relay contact for system failure notification (typical for series)
### 6. Installation & Setup
Requirements:
- DC power supply within 12–48 V DC range
- Proper grounding to ensure ESD protection
- DIN‑rail or panel mounting surface
Mounting Options:
- DIN‑Rail Mounting: Standard 35 mm DIN rail bracket included for quick installation in control cabinets.
- Panel Mounting: Optional brackets allow secure attachment to flat surfaces or equipment racks.
Configuration:
1. Connect DC power inputs to the terminal block or power jack.
2. Connect Ethernet devices to RJ‑45 ports and fiber uplinks to SC connectors.
3. Access the web interface via default IP address for initial setup.
4. Configure network parameters, PoE settings, and redundancy options through the web GUI or Open‑Vision utility.
5. Verify link status and redundancy operation using LED indicators and software monitoring.
LED Indicators:
- Power Status: Indicates active power inputs.
- Ring Master Indicator: Green LED flashes when operating in O‑Ring Master mode.
- Port Status: Link/activity and PoE status for each port.
### 7. Performance & Capabilities
- Switching Capacity: 1.2 Gbps (typical for 6‑port Fast Ethernet switch)
- Packet Forwarding Rate: ~0.9 Mpps (64‑byte packets)
- Latency: < 10 µs for 100 Mbps ports
- MAC Address Table: 2 K entries (typical for series)
- Buffer Memory: 1 Mbit (typical for series)
- PoE Power Budget: Up to 100 W total (25 W × 4 ports)
- Recovery Time: < 10 ms (O‑Ring redundancy)
- Power Efficiency: Low consumption (~5 W base load) with high PoE output efficiency.
- Reliability: MTBF > 300,000 hours (estimated for industrial grade components).
Limitations:
- Fast Ethernet (100 Mbps) only — no Gigabit uplinks.
- Lite‑managed feature set — basic management functions without advanced Layer 3 routing.
- PoE standard limited to IEEE 802.3af (not 802.3at or 802.3bt).
### 8. Standards & Compliance
Ethernet Standards:
- IEEE 802.3 10Base‑T
- IEEE 802.3u 100Base‑TX/FX
- IEEE 802.3x Flow Control
- IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
- IEEE 802.3af Power over Ethernet (PSE)
Redundancy Protocols:
- ORing (< 10 ms recovery time)
- RSTP/STP (IEEE 802.1w/D)
Management Protocols:
- SNMP v1
- Syslog, SMTP (email alerts), SNMP Trap
- Web GUI and Open‑Vision Windows Utility
Regulatory Compliance:
- CE: Conforms to European EMC and safety requirements.
- FCC: Part 15 Class A compliance for industrial environments.
- EN 60950: Safety standard for information technology equipment.
Environmental & Mechanical Standards:
- IP‑30 protection rating for industrial enclosures.
- ESD immunity 4 kV DC (Ethernet ports).
- Surge protection 2000 V DC (power inputs).
- Operating temperature −40 °C to +70 °C for extended industrial range.
### 9. Additional Information
Warranty:
5‑year limited hardware warranty covering manufacturing defects and component failures under normal operation.
Technical Support:
ORing provides lifetime technical support through email and online resources, including firmware updates and configuration guides.
Maintenance:
- Periodic inspection of power connections and fiber interfaces recommended.
- Firmware updates available via web interface or Open‑Vision utility.
- Diagnostic logs accessible through Syslog and SNMP for preventive maintenance.
Software Updates:
Firmware and Open‑Vision utility updates are available from ORing’s official support portal, ensuring compatibility with new network standards and security enhancements.
Reliability & Lifecycle:
The IPS‑2042FX‑MM‑SC is engineered for long‑term deployment in industrial automation and transportation systems, with a design lifecycle exceeding 10 years and component availability support for extended projects.
### Summary
The ORing IPS‑2042FX‑MM‑SC is a robust, lite‑managed industrial Ethernet switch that integrates PoE power delivery, fiber uplink redundancy, and advanced network management in a compact IP‑30 enclosure. Its combination of O‑Ring redundancy (< 10 ms recovery), triple redundant power inputs, and wide temperature tolerance makes it ideal for mission‑critical applications in industrial automation, transportation, and surveillance networks. With support for IEEE 802.3af PoE up to 25 W per port and dual 100Base‑FX fiber uplinks, the switch delivers both power and data reliably over long distances. Centralized management via web interface or Open‑Vision software simplifies configuration and monitoring across large‑scale industrial networks. Backed by a 5‑year warranty and compliance with CE, FCC, and EN60950 standards, the IPS‑2042FX‑MM‑SC offers a cost‑effective, high‑reliability solution for industrial Ethernet infrastructure.
-
IPS-2042.pdf
PDF Catalog
-
Selection_Guide.pdf
Manual
Kein Zubehör vorhanden.
