Comprehensive Product Summary – ADLINK PCI‑6216V 16‑Channel 16‑Bit Analog Output PCI Card

---

### 1. Product Overview

Product Name: PCI‑6216V
Model: PCI‑6216V
Series: ADLINK PCI‑6208/6216 Series (NuDAQ® Family)
Article Number: PCI‑6216V
Manufacturer: ADLINK Technology Inc., Taipei, Taiwan, R.O.C.

The ADLINK PCI‑6216V is a high‑density, 16‑channel, 16‑bit analog output card designed for the PCI bus. It is part of ADLINK’s NuDAQ® 6208/6216 series, which includes the PCI‑6208V (8‑channel voltage output), PCI‑6208A (8‑channel voltage/current output), and PCI‑6216V (16‑channel voltage output). The PCI‑6216V combines a PCI‑6208V base card with an EXP‑8V daughter board to double the number of voltage output channels, providing a total of 16 independent ±10 V analog outputs.

This card is engineered for high‑resolution, high‑speed analog signal generation and control applications such as automated test equipment (ATE), industrial process control, servo control, and signal simulation. It supports plug‑and‑play PCI configuration and includes onboard DC/DC conversion for stable analog power rails.

---

### 2. Key Features

- High‑Density Analog Output:
16 independent voltage output channels, each with 16‑bit resolution and ±10 V range.

- High Precision and Stability:
Utilizes Burr‑Brown PCM56U or equivalent monolithic multiplying DACs with ultra‑stable NiCr thin‑film resistors ensuring monotonicity, low distortion, and minimal differential linearity error.

- Fast Response:
Typical settling time of 2 µs for a full‑scale (‑10 V to +10 V) step; slew rate up to 10 V/µs (typical).

- Excellent Accuracy:
Gain error ±0.2 % maximum; differential non‑linearity ±0.65 LSB typical; monotonicity guaranteed to 15 bits.

- Integrated Power Conversion:
Onboard DC‑to‑DC converter provides isolated ±15 V analog supply rails, ensuring stable operation and reduced noise coupling from the PCI bus.

- Digital I/O Support:
Four TTL‑compatible digital inputs and four TTL‑compatible digital outputs for auxiliary control and status signaling.

- Plug‑and‑Play PCI Interface:
Fully compliant with 32‑bit PCI bus specifications; automatic resource allocation via BIOS (PnP).

- Software Support:
Compatible with ADLINK DAQPilot, DAQMaster, and legacy PCIS‑DASK drivers; supports Windows and Linux environments; integrates with MATLAB®, LabVIEW™, VEE™, and ActiveX® environments.

- Calibration and Utility Tools:
Includes DOS‑based 6208UTIL.EXE for functional testing and calibration; supports fine adjustment of full‑scale and offset per channel.

---

### 3. Technical Specifications

Analog Voltage Output:
- Channels: 16 voltage outputs (V0–V15)
- Resolution: 16 bits (15‑bit monotonicity typical)
- Output Range: ±10 V
- Output Drive Capability: ±5 mA maximum per channel
- Settling Time: 2 µs typical (‑10 V to +10 V step)
- Slew Rate: 10 V/µs typical
- Gain Error: ±0.2 % maximum
- Differential Non‑Linearity (DNL): ±0.65 LSB typical
- Output Initial State: 0 V after reset or power‑on
- Data Transfer Mode: Programmed I/O

Digital I/O:
- Channels: 4 digital inputs (DI0–DI3), 4 digital outputs (DO0–DO3)
- Logic Level: 5 V TTL compatible
- Input Voltage: Low ≤ 0.8 V, High ≥ 2.0 V (max 5.5 V)
- Output Voltage: Low ≤ 0.4 V, High ≥ 2.4 V
- Drive Capability: Sink 8 mA @ 0.5 V, Source 0.4 mA @ 2.7 V

Electrical and Environmental:
- Bus Interface: 32‑bit PCI bus (Plug and Play)
- Power Requirements:
+5 V @ 1.2 A typical
+12 V @ 0.3 A typical
- Operating Temperature: 0 °C – 50 °C
- Storage Temperature: –20 °C – 80 °C
- Relative Humidity: 5 % – 95 %, non‑condensing

Physical Characteristics:
- Dimensions: 175 mm × 107 mm (PCB only)
- Connector: 37‑pin D‑sub female (CN1)
- Weight: Approx. 200 g (card only)
- PCB Type: Half‑size PCI form factor

---

### 4. Functionality

Operating Principle:
Each of the 16 channels employs a dedicated 16‑bit DAC (Burr‑Brown PCM56U or equivalent) to convert digital data into precise analog voltages. The DACs are controlled via programmed I/O writes to the card’s register set. The output voltage is bipolar (±10 V), corresponding to signed 16‑bit digital values from –32768 (–10 V) to +32767 (+10 V).

Use Cases and Applications:
- Industrial Process Control: Generation of analog control signals for actuators, valves, and transducers.
- Automated Test Equipment (ATE): Multi‑channel voltage stimulus generation for device characterization.
- Servo and Motion Control: Analog command outputs for servo amplifiers and motor drives.
- Signal Simulation: Arbitrary waveform generation, reference voltage sources, and calibration systems.
- Laboratory and Educational Use: Precision analog output for instrumentation and teaching labs.

Compatibility:
- Fully compatible with ADLINK PCI‑6208V and PCI‑6208A register maps and software.
- Supported by ADLINK’s DAQPilot, DAQMaster, and legacy PCIS‑DASK driver suites.
- Integrates with MATLAB® DAQ Toolbox, LabVIEW™ VIs, Agilent VEE™, and ActiveX® controls.
- Operates under Windows 95/98/2000/XP/Vista/7 and Linux distributions with DASK/X drivers.

---

### 5. Components & Accessories

Included Items:
- PCI‑6216V analog output card
- ADLINK All‑in‑One Software & Driver CD
- User’s Manual and Quick Installation Guide

Optional Accessories:
- DIN‑37D: 37‑pin D‑sub termination board with DIN‑rail mounting; includes 1 m ACL‑10137 cable.
- ACLD‑9137: General‑purpose termination board with 37‑pin D‑sub male connector.
- ACL‑10137: 37‑pin D‑sub male‑to‑male shielded cable (1 m standard length).

Connectors:
- CN1: 37‑pin D‑sub female
- Analog outputs: V0–V15
- Analog ground: AGND
- Digital I/O: DI0–DI3, DO0–DO3
- Power pins: ±15 Vout, +5 Vout (for external use, limited current)

---

### 6. Installation & Setup

System Requirements:
- Available 32‑bit PCI slot (3.3 V or 5 V signaling)
- Compatible operating system with ADLINK driver support
- Administrative privileges for driver installation

Installation Procedure:
1. Power off the host PC and disconnect from mains.
2. Insert the PCI‑6216V card into an available PCI slot, ensuring proper seating.
3. Secure the bracket with the retaining screw.
4. Reassemble the chassis and reconnect power.
5. Boot the system; the BIOS will automatically assign resources (PnP).
6. Install ADLINK DAQPilot or legacy PCIS‑DASK drivers from the All‑in‑One CD.
7. Verify installation using DAQMaster or the 6208UTIL.EXE utility.

Calibration Setup:
- Each channel includes two variable resistors (VRn‑1 for full‑scale, VRn‑2 for offset).
- Calibration requires a 6½‑digit digital multimeter.
- Adjust VRs per channel to achieve 0 V offset and ±10 V full‑scale accuracy.
- Recommended recalibration interval: 6–12 months (3 months in harsh environments).

---

### 7. Performance & Capabilities

Analog Output Performance:
- Resolution: 16 bits (1 part in 65,536)
- Accuracy: ±0.2 % of full‑scale without trimming
- Linearity: ±0.001 % FSR typical
- Settling Time: 2 µs for 20 V step
- Output Drive: ±5 mA per channel
- Output Impedance: < 0.1 Ω typical

Digital I/O Performance:
- TTL‑compatible, 4 inputs / 4 outputs
- Input leakage current: ±0.2 mA max
- Output sink current: 8 mA max

Throughput and Timing:
- Data update rate limited by programmed I/O and 2.2 µs DAC transfer time.
- Each channel can be updated independently; simultaneous update supported via software sequencing.

Limitations:
- No onboard waveform memory or DMA; relies on host CPU for data transfer.
- Output current limited to ±5 mA; external buffering required for higher loads.
- Single‑ended analog outputs (common AGND).

---

### 8. Standards & Compliance

- Bus Interface: PCI Local Bus Specification Rev. 2.2 compliant
- Electrical Safety: Designed to meet CE and FCC Class A requirements
- Environmental: RoHS‑compliant manufacturing
- Operating Standards:
- Operating temperature: 0 °C – 50 °C
- Storage temperature: –20 °C – 80 °C
- Humidity: 5 % – 95 %, non‑condensing
- Quality Assurance: Factory‑calibrated and tested under ISO 9001‑certified processes

---

### 9. Additional Information

Warranty:
- Standard 2‑year limited warranty (1 year in China) covering defects in materials and workmanship.
- Excludes damage from misuse, unauthorized repair, or environmental factors.
- Extended calibration and service contracts available through ADLINK.

Technical Support:
- Website: [www.adlinktech.com](http://www.adlinktech.com)
- Email: service@adlinktech.com
- Phone: +886‑2‑8226‑5877 (Taiwan HQ)
- Regional Offices: USA, Germany, Japan, China, Korea, Singapore, India

Maintenance:
- Periodic recalibration recommended annually.
- Keep card free from dust and static discharge; store in anti‑static packaging when not in use.
- Firmware and driver updates available via ADLINK’s support portal.

Software Ecosystem:
- DAQPilot: Modern Windows driver and SDK with graphical configuration.
- DAQMaster: Device management and configuration utility.
- PCIS‑DASK: Legacy 32‑bit kernel driver for custom DAQ applications.
- DASK/X: Linux driver package with unified API.
- Third‑Party Integration: MATLAB® DAQ Toolbox adapter, LabVIEW™ VI set, Agilent VEE™ interface, and ActiveX® controls for SCADA/HMI systems.

Calibration Utilities:
- 6208UTIL.EXE: DOS‑based test and calibration tool supporting functional verification, offset/gain adjustment, and channel diagnostics.
- Procedure: Connect DMM to output channel, adjust VRs for 0 V offset and ±10 V full‑scale, verify linearity.

Safety & Handling:
- Handle only in ESD‑protected environments.
- Avoid exposure to moisture, vibration, or extreme temperatures.
- Disconnect power before installation or removal.

---

### Summary

The ADLINK PCI‑6216V is a robust, high‑precision 16‑channel analog output card offering 16‑bit resolution and ±10 V bipolar output capability. It combines fast 2 µs settling time, excellent linearity, and stable onboard power conversion to deliver reliable analog performance for demanding industrial and laboratory applications. With integrated TTL digital I/O, comprehensive software support, and straightforward calibration, the PCI‑6216V provides a versatile and cost‑effective solution for multi‑channel voltage generation and control within PCI‑based systems.