Produktsuche

- **Industrial-Grade SLC NAND Flash:** Utilizes Single-Level Cell technology for maximum endurance, data retention, and write cycle longevity, significantly outperforming MLC and TLC-based drives in reliability. - **Wide Temperature Range:** Fully operational from -40°C to +85°C, ensuring stable performance in extreme cold and heat, suitable for outdoor, vehicular, and factory environments. - **24/7 Continuous Operation:** Designed for mission-critical systems requiring uninterrupted service, such as industrial control units, network appliances, and embedded computing platforms. - **Enhanced Data Integrity:** Incorporates advanced error correction code (ECC), wear-leveling algorithms, and bad block management to maintain data accuracy and extend drive lifespan. - **High Shock and Vibration Resistance:** Built to withstand mechanical stress and vibration typical of industrial and mobile installations. - **Low Power Consumption:** Optimized for energy efficiency, reducing thermal load and power draw in embedded systems. - **Fast Data Access:** Provides high read/write speeds suitable for real-time data logging, boot operations, and high-frequency data acquisition. - **Compact Form Factor:** Available in standard SSD form factors (e.g., 2.5" SATA or mSATA, depending on configuration), enabling easy integration into existing systems. - **Long-Term Availability:** Designed for industrial lifecycle support, ensuring consistent supply and firmware stability over extended production periods.

Hersteller: Intel

Kategorie: SSD SLC

- **Dual-Device Connectivity:** Supports simultaneous connection of **two SSI devices** to a single controller or interface card, enabling multi-axis or dual-sensor configurations. - **High Signal Integrity:** Designed with **shielded twisted-pair conductors** to minimize electromagnetic interference (EMI) and maintain accurate synchronous serial communication. - **Optimized for ADLINK Motion Controllers:** Fully compatible with ADLINK’s motion control and data acquisition systems, ensuring plug-and-play operation and reliable performance. - **Industrial-Grade Construction:** Built with durable materials and robust connectors suitable for continuous operation in industrial environments. - **Precise Data Transmission:** Maintains synchronization between master and slave devices, supporting high-resolution encoder feedback and deterministic communication. - **Ease of Integration:** Pre-terminated connectors and standardized pin assignments simplify installation and reduce setup time. - **Compact and Flexible Design:** Cable length and flexibility allow for easy routing within control cabinets or machinery. - **Reliable SSI Communication:** Supports standard SSI protocol for absolute encoders and sensors, ensuring compatibility with a wide range of industrial devices.

Hersteller: Adlink Technology Inc.

Kategorie: Cables and Accessories

- **Multi-Device Connectivity:** Supports simultaneous connection of up to **three SSI devices** to a single controller or host interface. - **Optimized for SSI Communication:** Designed specifically for **Synchronous Serial Interface (SSI)** signal transmission, ensuring accurate clock and data synchronization. - **High Signal Integrity:** Shielded cable construction minimizes electromagnetic interference (EMI) and crosstalk, maintaining stable communication in electrically noisy industrial environments. - **Plug-and-Play Compatibility:** Pre-terminated connectors simplify installation and reduce wiring errors. - **Industrial-Grade Durability:** Built with robust materials suitable for continuous operation in factory automation, robotics, and motion control systems. - **Compact and Flexible Design:** Facilitates easy routing within control cabinets or machinery with limited space. - **Reliable Data Transmission:** Ensures consistent performance for high-resolution encoders and sensors requiring precise timing. - **Adlink System Integration:** Fully compatible with ADLINK motion controllers, data acquisition cards, and other SSI-enabled modules.

Hersteller: Adlink Technology Inc.

Kategorie: Cables and Accessories

- **Multi-Device Connectivity:** Supports simultaneous connection of up to **four SSI devices** (e.g., encoders, sensors, or position transducers) to a single SSI interface channel. - **High Signal Integrity:** Engineered for **low-noise, shielded signal transmission**, ensuring accurate data communication over extended cable lengths. - **Industrial-Grade Construction:** Built with **durable insulation, shielding, and strain relief** to withstand mechanical stress, vibration, and electromagnetic interference (EMI). - **Plug-and-Play Compatibility:** Designed for seamless integration with **ADLINK motion control cards, data acquisition modules, and industrial PCs** that support SSI communication. - **Optimized for Synchronization:** Maintains precise timing and synchronization between connected devices, critical for motion control and position feedback systems. - **Flexible Configuration:** Supports both **point-to-point** and **multi-drop** SSI configurations, depending on the host controller’s capabilities. - **Reliable Electrical Performance:** Ensures stable clock and data signal transmission with minimal latency and distortion. - **Compact and Organized Design:** Provides a clean, organized wiring solution for multi-device SSI setups, reducing installation complexity. - **Extended Temperature Range:** Suitable for operation in industrial temperature conditions, ensuring consistent performance in harsh environments.

Hersteller: Adlink Technology Inc.

Kategorie: Cables and Accessories

- **StarFabric-Compliant High-Speed Serial Transfer:** Supports 2.5 Gbps serial data transfer rate, ensuring stable, high-throughput communication between host and expansion chassis. - **Extended PCI Bus Connectivity:** Expands a standard 5 V/32-bit 33 MHz PCI bus through a CardBus interface, allowing use of standard PCI boards externally. - **Long-Distance Operation:** Supports up to 12 m connection distance using Category 5e STP cables, ideal for distributed measurement and control systems. - **Noise-Resistant Cabling:** Uses shielded twisted-pair (STP) cables to minimize electromagnetic interference in industrial environments. - **Compact CardBus Form Factor:** PC Card Standard Type II (119.0 × 54.0 × 19.0 mm) for easy installation in notebook PCs. - **Plug-and-Play Expansion:** Provides seamless PCI bus extension without requiring modification of existing PCI boards or application software. - **Power Synchronization:** The expansion chassis power supply can be turned on and off in synchronization with the host PC’s power. - **Flexible Chassis Compatibility:** Compatible with multiple StarFabric-compliant PCI expansion chassis models (ECH(PCI)SF series) offering 2, 4, 7, or 13 PCI slots. - **Industrial Reliability:** Designed for continuous operation in 0 – 50 °C environments with 20 – 90 % RH humidity tolerance (non-condensing). - **Operating System Support:** Compatible with Windows XP and Windows 2000 (dedicated driver required).

Hersteller: Contec

Kategorie: Bus Extensions

- **StarFabric-Compliant High-Speed Serial Transfer:** Supports 2.5 Gbps serial data transfer, enabling reliable PCI bus extension over long distances (up to 12 m). - **PCI Bus Compatibility:** Fully compliant with PCI Local Bus Specification Rev. 2.2 (+5V / +3.3V). Allows use of existing PCI add-on boards and software without modification. - **Low Profile and Standard PCI Slot Support:** Designed for low-profile PCI slots but includes a standard PCI bracket for compatibility with full-height slots. - **Extended Distance Operation:** Utilizes noise-resistant Category 5e STP cables for stable operation in industrial environments. Two 12-meter cables are included. - **Remote Power Synchronization:** The expansion chassis power supply can be turned on and off in synchronization with the host PC’s power state. - **Flexible Expansion Options:** Compatible with multiple expansion chassis configurations (2, 4, 7, or 13 PCI slots; short or long board sizes; AC adapter or built-in power supply). - **Industrial Reliability:** Designed for measurement and control applications requiring remote I/O or distributed system architectures. - **Operating System Support:** Compatible with Windows XP and Windows 2000 (dedicated driver installation required). - **RoHS Compliance:** Environmentally friendly design meeting RoHS directives.

Hersteller: Contec

Kategorie: Bus Extensions

- **StarFabric‑compliant high‑speed serial transfer:** Supports 2.5 Gbps serial communication between host and expansion chassis, ensuring stable, low‑latency data transfer over distances up to 12 m. - **Long‑distance PCI bus extension:** Extends the PCI bus up to 12 meters using Category 5e shielded twisted‑pair (STP) cables, allowing flexible system layouts and remote equipment placement. - **PCI Express host interface:** Occupies one PCI Express slot in the host PC to provide additional PCI (5 V/32‑bit, 33 MHz) slots in an external expansion chassis. - **Full PCI bus compatibility:** Complies with PCI Local Bus Specification Rev. 2.2, ensuring compatibility with existing PCI boards and software without modification. - **Low‑profile form factor:** Designed for low‑profile PCI Express slots; includes a standard‑height bracket for use in full‑size PCIe slots. - **Noise‑resistant cabling:** Uses shielded Category 5e STP cables for reliable operation in electrically noisy industrial environments. - **Automatic power synchronization:** The expansion chassis power supply can be turned on and off in synchronization with the host PC’s power state. - **Flexible chassis selection:** Compatible with multiple StarFabric expansion chassis models (ECH(PCI)SF series) offering 2, 4, 7, or 13 PCI slots, available in short or long board configurations and with either AC adapter or built‑in power supply. - **Industrial reliability:** Designed for continuous operation in 0 – 50 °C and 10 – 90 % RH environments, suitable for factory automation and measurement systems.

Hersteller: Contec

Kategorie: Bus Extensions

- **StarFabric-Compliant High-Speed Serial Transfer:** Supports 2.5Gbps serial data transfer between host PC and expansion chassis using StarFabric technology, ensuring stable, high-speed communication over long distances (up to 12m). - **13 PCI Expansion Slots:** Provides 13 long-size PCI slots compliant with PCI Local Bus Specification Rev.2.2 (+5V type), allowing installation of multiple PCI boards for data acquisition, control, or communication. - **Full-Size Industrial Chassis:** Constructed from durable steel, finished in light grey, and designed for industrial environments. The chassis includes a built-in cooling fan and is rack-mountable with supplied brackets. - **Integrated Power Supply:** Equipped with a 230W internal power supply (115/230VAC switch-selectable). The power system automatically synchronizes with the host PC’s power state for seamless operation. - **Remote Power Interlocking:** The chassis power can be turned on/off in synchronization with the host PC’s power supply. A jumper (JP1) allows manual override for independent operation. - **Flexible Connectivity:** Connects to the host PC via optional expansion adapters (EAD(LPCI)SF for Low Profile PCI or EAD(CB)SF for CardBus). Uses noise-resistant Category 5e STP cables for reliable communication. - **High Compatibility:** Fully compatible with standard PCI boards (5V/32-bit, 33MHz). No software modification required for existing PCI-based applications. - **Environmental Durability:** Designed for 0–50°C operation and 20–80%RH humidity (non-condensing). Built for long-term reliability in industrial and laboratory environments. - **Safety and Maintenance:** Includes built-in cooling fan and replaceable fan filter. Power supply and fan are rated for approximately five years of continuous operation under standard office conditions.

Hersteller: Contec

Kategorie: Bus Extensions

- **StarFabric-Compliant High-Speed Expansion:** Enables PCI bus extension via StarFabric serial interconnect technology, supporting 2.5 Gbps data transfer over standard Category 5e STP cables up to 12 m in length. Ideal for distributed measurement and control systems where the expansion chassis must be located away from the host PC. - **13 PCI Slots (Short-Size):** Provides 13 user-available PCI slots compliant with PCI Local Bus Specification Rev. 2.3 (+5 V type). Each slot supports 32‑bit, 33 MHz PCI boards. - **Integrated Power Supply:** Built-in 130 W (nominal) power supply with selectable 115/230 VAC input. Provides regulated DC outputs of +5 V, +3.3 V, +12 V, and −12 V with high current capacity for multiple boards. - **Automatic Power Interlocking:** The chassis power can be synchronized with the host PC’s power state, allowing automatic on/off control through the expansion adapter. - **Industrial-Grade Construction:** Heavy-duty steel enclosure with integrated cooling fan and optional rack-mount brackets. Designed for continuous operation in industrial environments (0–50 °C, 20–80 % RH). - **Flexible Connectivity:** Compatible with CONTEC expansion adapters: - **EAD(LPCI)SF** (Low Profile PCI slot) - **EAD-SF-LPE** (PCI Express slot) - **EAD(CB)SF** (CardBus slot, limited compatibility) These adapters provide the host interface and include dual 12 m Category 5e STP cables. - **Remote Operation Capability:** Supports up to 12 m separation between host and chassis, maintaining full PCI bus functionality through StarFabric serial bridging. - **Safety and Reliability:** Includes overcurrent protection, cooling fan, and power interlock jumper (JP1) for manual override. Designed for long service life with replaceable fan and filter components.

Hersteller: Contec

Kategorie: Bus Extensions

- **StarFabric-Compliant High-Speed Serial Transfer:** Supports 2.5 Gbps serial communication between host and chassis, enabling stable, long-distance PCI bus extension up to 12 m using Cat 5e STP cables. - **Two Full-Length PCI Slots:** Provides two user-available PCI slots (5 V, 32-bit, 33 MHz) for long-size PCI add-on boards, compliant with PCI Local Bus Specification Rev. 2.2. - **External AC Power Supply:** Includes a 60 W external AC adapter (100–240 VAC input) with automatic power interlocking to synchronize chassis power with the host PC. - **Compact Industrial Design:** Constructed from durable steel with a black finish, measuring 71 (W) × 144 (H) × 360 (D) mm and weighing approximately 1.6 kg. Designed for desktop use in industrial or laboratory environments. - **Integrated Cooling System:** Equipped with a built-in cooling fan to maintain stable thermal performance during continuous operation. - **Plug-and-Play PCI Bus Expansion:** The chassis is automatically recognized by the host system as a PCI-to-PCI bridge, allowing seamless integration without modification of existing PCI software or drivers. - **Power Interlocking Function:** The chassis power automatically turns on/off in synchronization with the host PC’s power state. Manual override is available via a front-panel power switch. - **Noise-Resistant Connectivity:** Uses shielded Category 5e cables to minimize electromagnetic interference, ensuring reliable operation in electrically noisy industrial environments. - **Flexible Adapter Compatibility:** Compatible with multiple host-side expansion adapters: - **EAD(LPCI)SF:** for Low Profile or Standard PCI slots - **EAD(CB)SF:** for CardBus (PCMCIA) slots - **Safety and Reliability:** Designed for 0–50 °C operating temperature and 20–80 % RH humidity (non-condensing). Includes overcurrent protection and conforms to RoHS environmental standards.

Hersteller: Contec

Kategorie: Bus Extensions

- **StarFabric-Compliant High-Speed Serial Transfer:** Supports 2.5 Gbps serial communication between host PC and expansion chassis using Category 5e STP cables, enabling stable, long-distance PCI bus extension up to 12 meters. - **Two PCI Expansion Slots:** Provides two short-size PCI (5V/32-bit, 33 MHz) slots for standard PCI add-on boards, expanding the host system’s PCI capacity. - **Compact Industrial Design:** Half-size black steel chassis (71 × 144 × 222 mm) with integrated cooling fan for efficient heat dissipation and space-saving installation. - **External Power Supply:** Includes a 60 W AC adapter (100–240 VAC input, 0.9 kg) for flexible deployment without internal power supply constraints. - **Power Interlocking Function:** The chassis power can be automatically synchronized with the host PC’s power state, ensuring coordinated startup and shutdown. - **Flexible Connectivity:** Compatible with multiple expansion adapters: - **EAD(LPCI)SF:** For Low Profile PCI bus slot (desktop PCs) - **EAD(CB)SF:** For CardBus slot (notebook PCs) - **EAD-SF-LPE:** For PCI Express slot (desktop PCs) - **Noise-Resistant Cabling:** Uses shielded Category 5e STP cables for reliable operation in industrial environments with electrical noise. - **Built-in Cooling Fan:** Ensures stable operation under continuous load and extended temperature ranges. - **OS Compatibility:** Supports Windows XP and Windows 2000 (dedicated driver required).

Hersteller: Contec

Kategorie: Bus Extensions

- **StarFabric-Compliant High-Speed Serial Transfer:** Supports 2.5 Gbps serial communication between host and chassis using Category 5e STP cabling, enabling stable, long-distance PCI bus extension up to 12 m. - **Four Full-Length PCI Slots:** Provides four user-available PCI slots (5 V, 32-bit, 33 MHz) for long-size PCI add-on boards, compliant with PCI Local Bus Specification Rev. 2.2. - **External Power Supply Design:** Includes a 60 W external AC adapter (100–240 VAC input) for flexible installation and reduced internal heat generation. - **Automatic Power Interlocking:** The chassis power supply can be synchronized with the host PC’s power state, allowing automatic on/off control. - **Compact Industrial Enclosure:** Constructed from durable steel with black finish; dimensions 112 (W) × 360 (D) × 144 (H) mm, weight approximately 2.0 kg. - **Integrated Cooling System:** Equipped with a built-in cooling fan to maintain stable operation under continuous industrial workloads. - **Flexible Connectivity:** Compatible with multiple expansion adapters—EAD(LPCI)SF (Low Profile PCI) and EAD(CB)SF (CardBus)—for various host PC interfaces. - **Noise-Resistant Cabling:** Uses shielded Category 5e STP cables for reliable data transmission in electrically noisy environments. - **Plug-and-Play PCI Bridge Recognition:** Detected by the host system as a PCI-to-PCI bridge, ensuring transparent operation with standard PCI drivers. - **Compact, Portable Design:** Optimized for desktop or embedded system integration where space efficiency and modular expansion are required.

Hersteller: Contec

Kategorie: Bus Extensions

- **StarFabric‑Compliant High‑Speed Serial Transfer:** Supports 2.5 Gbps serial communication between host and expansion chassis, enabling reliable PCI bus extension over distances up to 12 m using Cat 5e STP cables. - **Four PCI Expansion Slots:** Provides four short‑size (176.5 mm L × 107 mm H) PCI (5 V/32‑bit, 33 MHz) slots compliant with PCI Local Bus Specification Rev 2.2. - **Compact Half‑Size Industrial Design:** Space‑saving black steel chassis (112 × 144 × 222 mm) with integrated cooling fan and external 60 W AC adapter for flexible desktop or embedded use. - **Automatic Power Interlocking:** The chassis power supply can be turned on and off in synchronization with the host PC’s power state. Jumper JP1 allows manual override when host interlocking is not supported. - **Plug‑and‑Play PCI Bus Expansion:** The system behaves as a standard PCI‑to‑PCI bridge, allowing existing PCI boards and drivers to operate without modification. - **Flexible Host Interface Options:** Compatible with optional CONTEC expansion adapters: – EAD(LPCI)SF (Low Profile PCI bus slot) – EAD(CB)SF (CardBus slot) – EAD‑SF‑LPE (PCI Express slot) These adapters provide the StarFabric link and include dual 12 m Cat 5e STP cables. - **Integrated Cooling and Thermal Protection:** Built‑in fan ensures stable operation in industrial environments (0 – 50 °C, 20 – 80 % RH). - **Safety and Reliability:** Designed for continuous industrial operation with over‑current protection, durable steel enclosure, and RoHS compliance. - **Ease of Installation and Maintenance:** Includes AC adapter, power cable, slot covers, and board‑mounting screws. User‑replaceable fan and power supply (typical life ≈ 5 years at 25 °C).

Hersteller: Contec

Kategorie: Bus Extensions

- **StarFabric-Compliant High-Speed Serial Transfer:** Supports 2.5Gbps serial communication between host PC and expansion chassis using Category 5e STP cables, ensuring stable, noise-resistant data transmission over distances up to 12 meters. - **Four PCI Expansion Slots:** Provides four short-size PCI (5V/32-bit, 33MHz) slots compliant with PCI Local Bus Specification Rev.2.2, allowing installation of standard PCI add-on boards for industrial measurement, control, and communication applications. - **Built-in Power Supply:** Integrated 130W power supply with selectable 115/230VAC input. The chassis power can be synchronized with the host PC’s power state for automatic on/off control. - **Industrial-Grade Steel Construction:** Rigid steel chassis designed for field use, offering durability and electromagnetic shielding suitable for industrial environments. - **Compact Half-Size Design:** Space-saving 210(W) × 235(D) × 138(H) mm enclosure weighing approximately 3.5 kg, ideal for desktop or rack-mounted configurations. - **Cooling and Thermal Management:** Equipped with a built-in cooling fan and ventilation slits to maintain stable operation under continuous industrial workloads. - **Power Interlocking Function:** The chassis power supply can be interlocked with the host PC’s power, configurable via onboard jumper (JP1). Supports both interlocked and independent operation modes. - **Rack-Mountable:** Supplied with rack-mount brackets and screws for horizontal or vertical mounting in standard 19-inch racks. - **LED Indicators:** Front-panel POWER LED and LINK LEDs on the RJ-45 connectors provide visual status of power and communication link integrity. - **Compatibility with Multiple Expansion Adapters:** Works with optional CONTEC expansion adapters: - EAD(LPCI)SF – for Low Profile PCI slot (desktop PCs) - EAD(CB)SF – for CardBus slot (notebook PCs)

Hersteller: Contec

Kategorie: Bus Extensions

- **StarFabric-Compliant High-Speed Serial Transfer:** Supports 2.5 Gbps serial communication between host PC and expansion chassis using Category 5e STP cables, enabling up to 12 m separation between systems. - **PCI Bus Expansion Capability:** Adds seven long-size PCI (5V/32-bit, 33 MHz) slots to a host PC, fully compliant with PCI Local Bus Specification Rev. 2.2. - **Long-Size Board Support:** Accommodates full-length PCI boards up to 313.8 mm (L) × 107 mm (H), suitable for industrial-grade add-on cards. - **Integrated Power Supply:** Built-in 130 W AC power supply (115/230 VAC switch-selectable) with automatic power interlocking to the host PC’s power state. - **Industrial-Grade Construction:** Heavy-duty steel chassis with light grey finish, designed for field use and rack-mountable with included brackets. - **Cooling and Thermal Management:** Equipped with a built-in cooling fan and ventilation system to maintain stable operation under continuous industrial workloads. - **Power Interlocking Function:** The chassis power automatically turns on/off in synchronization with the host PC, ensuring safe and coordinated operation. - **Flexible Connectivity:** Compatible with CONTEC’s StarFabric expansion adapters: - **EAD(LPCI)SF** – for Low Profile PCI slot PCs - **EAD-SF-LPE** – for PCI Express slot PCs - **EAD(CB)SF** – for CardBus slot notebooks (not compatible with F7A/F13A models) - **Noise-Resistant Communication:** Uses shielded twisted-pair (STP) Category 5e cables for reliable data transfer in electrically noisy industrial environments. - **Rack-Mountable Design:** Includes rack-mount brackets and screws for horizontal or vertical installation in standard 19-inch racks. - **Safety and Reliability:** Designed for 0–50°C operation, 20–80% RH (non-condensing), with built-in protection against overcurrent and thermal overload.

Hersteller: Contec

Kategorie: Bus Extensions

- **StarFabric-Compliant High-Speed Serial Transfer:** Supports 2.5 Gbps serial communication between host PC and expansion chassis using StarFabric technology, enabling stable, long-distance PCI bus extension up to 12 meters. - **Seven PCI Expansion Slots:** Provides seven short-size PCI slots (5V, 32-bit, 33 MHz) compliant with PCI Local Bus Specification Rev. 2.3, allowing installation of multiple add-on boards for data acquisition, control, or communication. - **Built-in Power Supply:** Integrated 130W power supply with selectable 115/230 VAC input, providing +5VDC, +3.3VDC, +12VDC, and -12VDC outputs to support multiple PCI boards simultaneously. - **Industrial-Grade Steel Chassis:** Constructed from durable steel for field use, with integrated cooling fan and ventilation slits for thermal stability in industrial environments. - **Power Interlocking with Host PC:** The chassis power supply automatically turns on and off in synchronization with the host PC’s power state, simplifying system operation and ensuring safe startup/shutdown. - **Flexible Connectivity:** Compatible with CONTEC’s StarFabric expansion adapters (EAD(LPCI)SF for Low Profile PCI and EAD(CB)SF for CardBus), allowing connection to various host PC types. - **Compact Half-Size Design:** Space-efficient enclosure (300 mm W × 138 mm H × 255 mm D) suitable for desktop or rack-mounted installations. - **Noise-Resistant Cabling:** Uses Category 5e shielded twisted-pair (STP) cables for reliable data transmission in electrically noisy environments. - **Rack-Mountable Configuration:** Includes rack-mount brackets and screws for horizontal or vertical mounting in standard industrial racks. - **Environmental Robustness:** Operates in 0–50°C temperature range and 20–80% relative humidity (non-condensing), suitable for factory and laboratory environments.

Hersteller: Contec

Kategorie: Bus Extensions

- **ARM9-based Industrial Computer:** Powered by the ATMEL AT91RM9200 CPU running at 180 MHz with integrated Memory Management Unit (MMU). - **Linux-ready Platform:** Preloaded with Linux kernel 2.6.14, U-Boot 1.1.2 bootloader, and multiple file systems (JFFS2, EXT2, VFAT/FAT, NFS). - **Comprehensive Development Environment:** Includes GNU C/C++ cross-compilation toolchain and POSIX-compliant GLIBC library for application development on Linux or Windows hosts. - **Integrated Networking:** 10/100 Mbps Ethernet interface with DAVICOM DM9161 PHY and 1.5 kV magnetic isolation for industrial reliability. - **Multiple Serial Interfaces:** Four high-speed UARTs (up to 921.6 Kbps), one configurable as RS-232/422/485 with hardware auto-direction control and 9-bit multi-drop mode. - **USB Connectivity:** Two USB 2.0 full-speed host ports (12 Mbps) supporting flash drives, Wi-Fi adapters, Ethernet adapters, and serial converters. - **Expandable Storage:** One SD card interface (SD 1.0 standard, up to 2 GB non-SDHC). - **Rich I/O Options:** 32 programmable GPIO channels, I2C, SPI, I2S, and local bus interfaces for peripheral expansion. - **Low Power, Fanless Design:** Consumes less than 2.5 W, ideal for embedded and industrial environments. - **Wide Operating Range:** Supports 9–48 VDC input, 300 mA @ 12 VDC, and operates from -10°C to +60°C (standard kit) or -20°C to +80°C (M-501T wide-temperature version). - **Compact Form Factor:** SoM dimensions 80 × 50 mm; carrier board 150 × 100 mm. - **Preloaded Network Services:** SSH, FTP, Telnet, web server (lighttpd), and system daemons for remote management. - **Industrial-grade Reliability:** Flash-based architecture, watchdog timer, and hardware-level protection for stable long-term operation.

Hersteller: Artila

Kategorie: SBC Modules

- **ARM9-based Embedded Computer:** Powered by the Atmel AT91SAM9G20 SoC featuring a 400 MHz ARM926EJ-S ARM Thumb processor with integrated Memory Management Unit (MMU). - **Compact Form Factor:** Credit-card-sized SoM (50 × 80 mm) suitable for space-constrained embedded designs. - **Pre-installed Linux System:** Linux kernel 2.6.29 with U-Boot bootloader, BusyBox utilities, and lighttpd web server preloaded in NAND Flash. - **Comprehensive Connectivity:** - 10/100 Mbps Ethernet interface with 1.5 kV magnetic isolation. - Four UARTs (RS-232/422/485 software-selectable). - Two USB 2.0 full-speed (12 Mbps) host ports and one USB 2.0 device port. - SD memory card interface compliant with SD Specification 1.0. - SPI, I²C, and I²S buses for peripheral expansion. - **Programmable I/O:** 32 general-purpose digital I/O lines (3.3 V CMOS compatible) with interrupt capability. - **Onboard Real-Time Clock:** ST M41T81 RTC with 48 mAh lithium backup battery. - **Low Power Consumption:** Operates from 3.0–3.6 V DC (nominal 3.3 V) with typical power consumption of 2–2.5 W. - **Industrial-Grade Design:** Fanless operation, flash-based architecture, and 0 °C to 70 °C operating temperature range. - **Software Development Environment:** Includes GNU C/C++ cross-compilation toolchain for Linux and Windows, with support for Java acceleration and WinCE. - **Security and Networking:** Built-in SSH (v1/v2), SSL, FTP, Telnet, and SNMP services. - **Carrier Board Integration:** Provides convenient access to all SoM interfaces, DIN-rail mountable enclosure, and ready-to-use Linux toolchain.

Hersteller: Artila

Kategorie: IoT Gateway

- **ARM9-based System-on-Module:** Powered by the Atmel AT91SAM9G45 CPU running at 400 MHz with integrated Memory Management Unit (MMU). - **Pre-installed Linux OS:** Linux kernel 2.6.38 with U-Boot bootloader and full file system support (UBI, JFFS2, EXT2/3, VFAT, NFS, NTFS). - **Comprehensive Development Environment:** Includes GNU C/C++ cross-compilation toolchain for Linux and Windows, GLIBC POSIX libraries, and IPKG package management. - **High Connectivity:** - 1 × 10/100 Mbps Ethernet port with onboard PHY and transformer (DAVICOM DM9161). - 4 × UARTs (RS-232/422/485 selectable) supporting up to 921.6 Kbps. - 1 × USB 2.0 high-speed host (480 Mbps) and 1 × USB 2.0 device port. - 1 × SD card interface (up to 32 GB, SD 2.0 compliant). - I²C, I²S, and SPI interfaces for peripheral expansion. - **Extensive I/O:** 32 programmable 3.3 V GPIO channels with interrupt support on PIO32. - **Integrated Real-Time Clock:** ST M41T81 RTC with onboard lithium backup battery (48 mAh). - **Compact and Efficient:** 80 × 50 mm SoM, 3.3 VDC input, typical power consumption 2 W. - **Carrier Board Integration:** Provides additional RS-232/422/485 ports, dual USB hosts, Ethernet, SD socket, GPIO connectors, EEPROM, and local bus interface. - **Fanless, DIN-rail mountable enclosure:** Suitable for industrial and embedded environments. - **Wide Operating Temperature Range:** 0 °C to +70 °C.

Hersteller: Artila

Kategorie: IoT Gateway

- **Signal Conversion:** Converts analog current input (0–20 mA) to a proportional voltage output (0–5 V). - **High Accuracy:** Ensures precise linear conversion with minimal signal distortion or drift. - **Industrial Compatibility:** Designed for use in standard 2-wire or 4-wire current loop systems. - **Wide Application Range:** Suitable for process monitoring, automation control, and sensor signal conditioning. - **Compact Design:** Space-saving form factor for DIN rail or panel mounting. - **Electrical Isolation (if applicable):** Provides galvanic isolation between input and output circuits to prevent ground loops and interference (typical for devices in this category). - **Stable Output:** Maintains consistent voltage output even under varying load conditions. - **Low Power Consumption:** Optimized for continuous operation in industrial environments. - **Rugged Construction:** Built to withstand vibration, temperature fluctuations, and electrical noise. - **Ease of Integration:** Compatible with standard analog input modules of PLCs and controllers.

Hersteller: Keine Kategorie

Kategorie: Standard Mod.

- **Signal Conversion:** Converts a standard **4–20 mA current input** into a **0–5 V voltage output**, enabling interoperability between current loop sensors and voltage-based control systems. - **High Accuracy:** Designed for precise linear conversion with minimal signal distortion or drift. - **Industrial Compatibility:** Fully compatible with standard industrial 2-wire and 3-wire current loop transmitters. - **Wide Application Range:** Suitable for process control, automation systems, data acquisition, and monitoring applications. - **Compact Design:** Space-efficient form factor for easy integration into control panels or DIN rail-mounted enclosures. - **Electrical Isolation (if applicable):** Provides galvanic isolation between input and output circuits to prevent ground loops and interference (depending on configuration). - **Robust Construction:** Built to withstand industrial temperature ranges, vibration, and electrical noise. - **Ease of Integration:** Standardized input/output ranges simplify configuration and reduce setup time. - **Low Power Consumption:** Optimized for continuous operation in industrial environments with minimal energy demand. - **Maintenance-Free Operation:** Solid-state design ensures long-term reliability without mechanical wear.

Hersteller: Keine Kategorie

Kategorie: Standard Mod.

- **Dual Measurement Range:** Supports two selectable current ranges — **0–10 A** and **0–100 A**, allowing flexible use across low- and medium-current applications. - **Wide Frequency Response:** Operates effectively from **DC up to 1 kHz**, suitable for both direct current and alternating current measurement. - **High Accuracy Output:** Provides a **voltage output of ±1 V** corresponding to the full-scale range (FSR) with a **±2% FSR accuracy tolerance**, ensuring precise signal representation for monitoring and recording systems. - **Compact Handheld Clamp Design:** Features a **19 mm jaw opening**, enabling easy clamping around conductors, cables, or busbars without circuit interruption. - **Battery-Powered Operation:** Equipped with an **integrated battery supply**, ensuring portability and eliminating the need for external power sources. - **Non-Invasive Measurement:** Allows current measurement without breaking the circuit, enhancing safety and convenience. - **Versatile Application Range:** Suitable for DC and AC current measurement in laboratory testing, maintenance diagnostics, energy monitoring, and educational environments. - **Robust Construction:** Designed for durability and consistent performance in professional and industrial settings.

Hersteller: Keine Kategorie

Kategorie: Drucksensoren

- **Measurement Range:** Up to 50 A AC nominal current. - **Design Type:** Through-hole (Durchsteckwandler) configuration for non-intrusive current measurement. - **Output Signal:** ±5 V analog output proportional to the measured current. - **Supply Voltage:** ±15 V DC dual supply operation for symmetrical signal output. - **Galvanic Isolation:** Provides electrical isolation between primary current circuit and secondary measurement circuit, ensuring safety and signal integrity. - **High Accuracy:** Designed for precise current measurement in industrial and laboratory applications. - **Compact Form Factor:** Optimized for panel or DIN-rail integration in control cabinets. - **Low Power Consumption:** Efficient internal electronics minimize power draw from the supply. - **Wide Frequency Response:** Suitable for AC current measurement across standard industrial frequency ranges (typically 50/60 Hz). - **Robust Construction:** Built for long-term reliability in demanding electrical environments. - **Ease of Integration:** Standardized output and supply interfaces simplify connection to measurement and control systems.

Hersteller: Keine Kategorie

Kategorie: Drucksensoren

- **Super VGA Display Controller:** Supports standard VGA and Super VGA display modes, enabling resolutions up to 1280 × 1024 pixels for clear, detailed visual output. - **PC/104 Form Factor:** Fully compliant with the PC/104 embedded computing standard, ensuring mechanical and electrical compatibility with a wide range of PC/104 CPU and I/O modules. - **1 MB Onboard Video RAM:** Dedicated video memory provides smooth graphics performance and stable image rendering for industrial and embedded display applications. - **Compact Design:** Measuring only 95 mm × 90 mm, the module fits easily into space-constrained embedded systems and enclosures. - **Low Power Consumption:** Optimized for embedded environments where power efficiency and thermal management are essential. - **Industrial Reliability:** Designed for continuous operation in demanding environments, with robust construction and long product lifecycle support. - **Flexible Display Output:** Supports analog VGA output for connection to standard monitors, industrial displays, or panel-mounted LCDs. - **Plug-and-Play Integration:** Compatible with standard PC/104 bus interfaces, simplifying system integration and reducing development time. - **Extended Resolution Support:** Capable of driving high-resolution displays up to 1280 × 1024, suitable for graphical user interfaces, control panels, and data visualization. - **Scalable Architecture:** Can be combined with other PC/104 modules (CPU, I/O, communication) to build complete embedded systems.

Hersteller: Axiom

Kategorie: PC/104

- **Supercapacitor-Based Energy Storage:** Utilizes eight 100F, 3.0V ultracapacitors to deliver a total energy capacity of **2500 watt-seconds (Ws)**, ensuring stable backup power without the degradation issues associated with chemical batteries. - **Wide Operating Temperature Range:** Fully functional from **-25°C to +65°C**, suitable for industrial and outdoor environments where temperature extremes are common. - **Exceptional Longevity:** Offers **over 10 years of service life** at 25°C and supports **up to 500,000 charge/discharge cycles**, significantly reducing maintenance and replacement costs compared to battery-based UPS systems. - **Patented CAP Energy Management Technology:** Incorporates a microprocessor-controlled energy management system that monitors power consumption, predicts shutdown timing, and optimizes energy utilization during outages. - Provides **auto/manual shutdown control** - Includes **high/low voltage protection** - Supports **user-configurable parameters** for energy and lifespan optimization - **User-Configurable Operation:** Through the PB2500J Parameter Configurer software, users can adjust parameters such as auto-start delay, voltage thresholds, shutdown timing, and supercapacitor lifetime extension. - **Form Factor Flexibility:** Available as a **half-length PCIe card (PB-2500J-PCIe)** and as **Cassette modules (PB-2500J-CSM5/CSM7)** for Neousys Nuvo series controllers. - **Maintenance-Free Design:** No chemical degradation, no electrolyte leakage, and no need for periodic replacement, ensuring long-term reliability.

Hersteller: Neousys Technology

Kategorie: Power Modules