- **Multi‑Channel Analog Input:** Supports 16 single‑ended or 8 differential analog input channels. Input mode selection (single‑ended/differential) is software‑configurable. - **Flexible Input Range Configuration:** Each channel’s input range can be independently set via software to any of the following: ±10 V, ±5 V, ±2.5 V, ±1.25 V, 0–10 V, 0–5 V, 0–2.5 V, or 0–1.25 V. - **High‑Speed 12‑bit A/D Conversion:** Conversion speed up to 10 µs per channel (100 kS/s) with 12‑bit resolution, providing precise analog‑to‑digital conversion for laboratory, industrial, and embedded measurement systems. - **Sampling Control Flexibility:** Sampling can be triggered by software, internal clock, or external TTL‑level clock. Internal sampling clock period is adjustable from 10,000 ns to 1,073,741,824,000 ns in 250 ns increments. - **Digital I/O Capability:** Four TTL‑level digital input and four TTL‑level digital output lines allow external device monitoring and control. - **Programmable Timer:** Built‑in timer with a configurable period from 500 ns to 1,073,741,824,000 ns (250 ns resolution). Provides TTL‑level 250 ns low‑pulse output with 24 mA sink current. - **External Trigger and Clock Inputs:** One non‑isolated TTL‑level external trigger input (falling‑edge detection) and one external sampling clock input enable synchronization with external systems. - **Software Support:** Includes CONTEC’s API‑PAC(W32) driver library for Windows and Linux, with sample programs and diagnostic utilities. LabVIEW VI‑DAQ library available for free download. - **PCI Bus Compatibility:** Fully compliant with 32‑bit, 33 MHz PCI bus specification; supports both 5 V and 3.3 V keyed slots (universal key shape). - **Compact and Lightweight Design:** Board dimensions 176.41 mm (L) × 105.68 mm (H); weight approximately 150 g. - **Regulatory Compliance:** Conforms to VCCI Class A, CE Marking (EMC Directive Class A), and RoHS Directive.

Manufacturer: Contec

Category: A/D General Purpose PCI

- **High‑Speed 12‑bit A/D Conversion:** Sampling rate up to 100 kS/s (10 µs per channel) using an AD774 A/D converter. - **Flexible Input Configuration:** 16 single‑ended or 8 differential analog input channels; expandable to 32 SE / 16 DI with optional ATCH‑16(PCI) multiplexer. - **Wide Programmable Input Ranges:** Bipolar ±1.25 V / ±2.5 V / ±5 V / ±10 V or unipolar 0–1.25 V / 0–2.5 V / 0–5 V / 0–10 V, software‑selectable per channel group. - **Analog Output Channel:** One 12‑bit D/A output channel, ±5 V / ±10 V / 0–10 V range, 6 µs conversion speed, 5 mA max drive. - **Large Onboard Buffer Memory:** 256 k‑word FIFO or ring buffer enables continuous high‑speed sampling independent of CPU load. - **Intelligent Sampling Control:** ASIC‑based event controller supports software, level, or external trigger start/stop conditions and programmable sampling clocks. - **Digital I/O and Counter Functions:** Four TTL‑level digital inputs, four TTL‑level digital outputs, and one 32‑bit up‑counter (i8254‑compatible). - **Bus Master Transfer Capability:** High‑speed DMA‑like data transfer directly to PC memory without CPU intervention. - **Isolation and Noise Immunity:** Photo‑couplers and isolation amplifiers isolate PC bus from external I/O circuits, preventing ground loops and noise interference. - **Software‑Configurable Ranges:** Input/output ranges and gain settings adjustable via software—no jumper changes required. - **Multi‑Board Scalability:** Up to 16 boards can be installed in a single system; IRQ A–D selectable. - **Comprehensive Software Support:** Drivers for Windows and Linux, plus MATLAB (ML‑DAQ), LabVIEW (VI‑DAQ), and CONTEC’s C‑LOGGER data‑logging software.

Manufacturer: Contec

Category: A/D General Purpose PCI

- **High‑Speed 12‑bit A/D Conversion:** Performs analog‑to‑digital conversion at up to 10 µs per channel (100 kS/s aggregate rate) with 12‑bit resolution. - **Flexible Analog Input Configuration:** 16 single‑ended or 8 differential channels selectable via onboard jumpers. Input ranges configurable as bipolar ±10 V or unipolar 0–10 V. - **Large Onboard Memory:** 16 M‑sample FIFO or ring buffer enables background sampling independent of host CPU load. - **Analog Output Channel:** One 12‑bit D/A output channel supporting bipolar ±10 V, ±5 V, or unipolar 0–10 V ranges with 6 µs conversion speed and ±5 mA drive capability. - **Digital I/O and Counter:** Four TTL‑level digital inputs and four TTL‑level digital outputs, plus one 32‑bit counter (i8254‑compatible) with internal 4 MHz or external clock. - **Trigger and Control Flexibility:** Sampling can start/stop via software, analog level comparison, or external TTL trigger signals. - **High Compatibility and Software Support:** Includes Windows and Linux drivers, C‑LOGGER data‑logging software, and libraries for MATLAB (ML‑DAQ) and LabVIEW (VI‑DAQ). - **Compact PCI Short‑Size Form Factor:** 176.41 mm × 105.68 mm board fits standard PCI slots with universal keying (3.3 V/5 V). - **Upward Compatibility:** Fully compatible with previous Analog E‑Series boards, offering improved buffer capacity and universal PCI support.

Manufacturer: Contec

Category: A/D General Purpose PCI

- **High‑Density Multi‑Channel Analog Input:** Supports 64 single‑ended or 32 differential analog input channels. Channel configuration (single‑ended/differential) is software‑selectable. - **Flexible Input Range Configuration:** Each channel’s input range can be independently set via software to one of eight ranges: ±10 V, ±5 V, ±2.5 V, ±1.25 V, 0–10 V, 0–5 V, 0–2.5 V, or 0–1.25 V. - **High‑Speed 12‑Bit A/D Conversion:** Conversion speed up to 10 µs per channel (100 kS/s) with 12‑bit resolution. - **Programmable Sampling Control:** Sampling can be triggered by software, internal clock, or external TTL‑level clock input. Supports both periodic and event‑driven sampling. - **Integrated Digital I/O:** Four TTL‑level digital input and four TTL‑level digital output channels for external device control and monitoring. - **Programmable Timer Function:** Timer period configurable from 500 ns to 1,073,741,824,000 ns in 250 ns increments. Provides TTL‑level output pulses for synchronization. - **External Trigger and Clock Inputs:** One non‑isolated TTL‑level external trigger input (falling edge) and one external sampling clock input for precise timing control. - **Software Support:** Includes driver libraries for Windows (API‑AIO(WDM), API‑AIO(98/PC)) and Linux (API‑AIO(LNX)), plus LabVIEW VI‑DAQ library for graphical programming. - **PCI Bus Compatibility:** 32‑bit, 33 MHz PCI interface with universal keying (supports both 3.3 V and 5 V slots). - **Compact and Lightweight Design:** Dimensions 176.41 mm (L) × 105.68 mm (H); weight approximately 150 g. - **Regulatory Compliance:** Certified for VCCI Class A and CE Marking (EMC Directive Class A).

Manufacturer: Contec

Category: A/D General Purpose PCI

- **High-Precision Analog Input:** 16-bit resolution with ±10 V bipolar input range, ensuring accurate analog signal acquisition. - **High-Speed Sampling:** Conversion speed of **10 µs per channel** (100 kS/s aggregate rate). - **Multi-Channel Input:** 16 single-ended analog input channels, unisolated, with 1 MΩ or higher input impedance. - **Integrated Digital I/O:** 4 unisolated TTL-level digital inputs and 4 unisolated TTL-level digital outputs (positive logic). - **Built-in Counter Function:** One 32-bit up-counter channel with a maximum count frequency of **10 MHz**, supporting external gate and up-clock inputs. - **Buffer Memory:** 1 k-word onboard buffer for background data acquisition independent of CPU load. - **Software Calibration:** Full software-based calibration allows adjustment and compensation for environmental variations. - **Trigger and Clock Control:** Supports software, external trigger, and external clock for flexible sampling control. - **Digital Filtering:** Configurable 1 µs digital filter for external control signals to prevent chattering. - **Low-Profile PCI Form Factor:** Supplied with interchangeable **low-profile and standard PCI brackets** for versatile installation. - **Comprehensive Software Support:** Includes **API-PAC(W32)** driver library, **C-LOGGER** data logger, and plug-ins for **MATLAB (ML-DAQ)** and **LabVIEW (VI-DAQ)**. - **Cross-Platform Compatibility:** Drivers available for **Windows (API-AIO(WDM))** and **Linux (API-AIO(LNX))**. - **Robust Environmental Tolerance:** Operates from **0–50°C** and **10–90% RH (non-condensing)**.

Manufacturer: Contec

Category: A/D General Purpose PCI

- **Multi‑Function Integration:** Combines analog input/output, digital I/O, and counter functions on a single PCI board, minimizing slot usage and simplifying system design. - **High‑Resolution Analog I/O:** 16‑bit resolution for both input and output ensures precise signal acquisition and generation. - **High‑Speed Sampling:** Analog input supports up to 500 kS/s aggregate sampling rate; analog output supports up to 100 kS/s. - **Flexible Input/Output Ranges:** Bipolar ranges ±2.5 V/±5 V/±10 V and unipolar ranges 0–2.5 V/0–5 V/0–10 V for input; ±1.25 V to ±10 V or 0–10 V for output. - **Event Controller:** Hardware‑based event controller enables precise synchronization between analog, digital, and counter operations without CPU overhead. Supports external triggers, clock synchronization, and inter‑board coordination. - **Bus Master DMA Transfer:** High‑speed data transfer via PCI bus master DMA minimizes CPU load and allows simultaneous analog and digital data streaming. - **Independent FIFO/RING Buffers:** 64 k‑word buffer memory per analog input/output channel supports continuous or cyclic data acquisition and generation. - **Software‑Based Calibration:** Full calibration of analog channels via software; user calibration data can be stored in non‑volatile memory. - **Synchronization Control Connector:** Allows synchronization of up to 16 boards for multi‑channel expansion and simultaneous sampling. - **Digital Filtering:** Built‑in digital filters on digital and counter inputs prevent chattering and noise interference. - **Cross‑Platform Support:** Compatible with Windows and Linux; includes drivers, APIs, and sample programs. - **Third‑Party Software Integration:** Supports MATLAB (ML‑DAQ), LabVIEW (VI‑DAQ), and CONTEC’s C‑LOGGER data logging software. - **Compact PCI Form Factor:** Standard 32‑bit, 33 MHz PCI interface with universal keying for 3.3 V/5 V slots.

Manufacturer: Contec

Category: A/D General Purpose PCI

- **High‑Precision Analog I/O:** - 8‑channel single‑ended analog inputs, 16‑bit resolution, ±10 V range. - 2‑channel analog outputs, 16‑bit resolution, ±10 V range. - 100 kS/s maximum sampling rate per channel. - **Digital I/O and Counter:** - 4 digital inputs and 4 digital outputs (TTL‑level, positive logic). - 1 × 32‑bit counter channel, up to 10 MHz input frequency. - **Compact, Low‑Profile PCI Design:** - Fits both low‑profile and standard PCI slots (interchangeable brackets included). - Ideal for space‑constrained embedded or industrial PCs. - **Software‑Based Calibration:** - Full analog input/output calibration via software; user‑defined calibration data can be stored in addition to factory calibration. - **Buffered Data Transfer:** - Independent 1 k‑word FIFO buffers for both analog input and output enable background operation independent of CPU load. - **Flexible Triggering and Clocking:** - Supports software, external trigger, and external clock modes. - Rising/falling edge selection and 1 µs digital filter configurable by software. - **Comprehensive Software Support:** - Windows driver library (API‑AIO(WDM)) and Linux driver (API‑AIO(LNX)). - Data logger software (C‑LOGGER) for non‑programmatic data acquisition. - MATLAB (ML‑DAQ) and LabVIEW (VI‑DAQ) libraries available free of charge. - **Robust Control and Filtering:** - Digital filters on external control signals prevent chattering. - Supports time‑based or externally synchronized analog I/O operation. - **Cost‑Effective Non‑Isolated Design:** - High precision and performance at low cost for general‑purpose measurement and control.

Manufacturer: Contec

Category: A/D General Purpose PCI

PCI bus AD card 12bit with 16SE channels/±0,03125/0,625/1,25/2,5/5V, 8/8 DIO, 50pin flat panel connector, 174*99mm, Axiom

Manufacturer: Axiom

Category: A/D General Purpose PCI

- **High-Speed Analog-to-Digital Conversion:** 12-bit resolution with a maximum sampling rate of 333 kS/s, enabling precise and rapid data acquisition. - **Multiple Input Channels:** 16 single-ended (SE) analog input channels, allowing simultaneous measurement of multiple signals. - **Flexible Input Ranges:** Supports bipolar voltage ranges of ±0.625 V, ±1.25 V, ±2.5 V, ±5 V, and ±10 V, as well as unipolar ranges of 0–0.625 V, 0–1.25 V, 0–2.5 V, 0–5 V, and 0–10 V. - **Digital I/O Capability:** 8 digital input and 8 digital output channels for control and monitoring tasks. - **Integrated Timer/Counter:** One programmable timer/counter (Intel 8454 compatible) for event counting, frequency measurement, or timing control. - **PCI Bus Interface:** Fully compliant with standard PCI bus specifications, ensuring compatibility with a wide range of PC-based systems. - **Compact Form Factor:** Board dimensions of 218 mm × 122 mm, suitable for standard PCI slots. - **High-Quality Connector:** Equipped with a 50-pin flat panel connector for secure and organized signal interfacing. - **Bipolar and Unipolar Operation:** Configurable input modes for different signal types and measurement requirements. - **Industrial-Grade Reliability:** Designed for continuous operation in industrial and laboratory environments with stable performance and low noise.

Manufacturer: Axiom

Category: A/D General Purpose PCI

- **High-Speed Analog-to-Digital Conversion:** 12-bit resolution with a maximum sampling rate of 333 kS/s, enabling precise and rapid signal acquisition. - **Multi-Channel Input:** 16 single-ended analog input channels for simultaneous or multiplexed data collection. - **Flexible Input Ranges:** Supports both bipolar (±0.625 V, ±1.25 V, ±2.5 V, ±5 V, ±10 V) and unipolar (0–0.625 V, 0–1.25 V, 0–2.5 V, 0–5 V, 0–10 V) voltage ranges. - **Digital I/O Capability:** 8 digital input and 8 digital output lines for control and monitoring tasks. - **Integrated Timer/Counter:** One programmable timer/counter (8454 series) with one free timer channel for event counting, frequency measurement, or pulse generation. - **PCI Bus Interface:** Fully compliant with standard PCI bus architecture for plug-and-play installation in desktop or industrial PCs. - **Compact Form Factor:** Board dimensions of 218 mm × 122 mm, optimized for standard PCI slots. - **High-Density Connector:** 50-pin flat panel connector for analog, digital, and timing signal interfacing. - **Industrial-Grade Design:** Engineered for reliability, low noise, and stable performance in demanding environments.

Manufacturer: Axiom

Category: A/D General Purpose PCI

- **High‑Resolution Analog Input:** 16 single‑ended or 8 differential analog input channels with 12‑bit resolution and up to 110 kS/s sampling rate. - **Flexible Input Configuration:** Software‑selectable bipolar and unipolar input ranges with programmable gains (×0.5, ×1, ×2, ×4, ×8). - **Dual Analog Outputs:** Two 12‑bit D/A channels with programmable output ranges (0–5 V, 0–10 V, or external reference), ±5 mA drive, and 30 µs settling time. - **Digital I/O:** 16 TTL‑compatible digital inputs and 16 TTL‑compatible digital outputs for control and monitoring applications. - **Timer/Counter:** One 16‑bit general‑purpose counter/timer (Intel 8254 compatible) with a 2 MHz base clock and external clock input up to 10 MHz. - **Low‑Profile Design:** MD1‑size (120 × 65 mm) PCI card suitable for compact industrial PCs and embedded systems. - **Universal PCI Support:** Compatible with both 3.3 V and 5 V PCI slots, ensuring broad system compatibility. - **Automatic Channel Scanning:** Hardware‑based auto‑scan for sequential analog input sampling. - **Noise Reduction:** Differential input mode for improved common‑mode noise rejection. - **On‑Board DC/DC Converter:** Provides isolated and stable analog power for improved measurement accuracy. - **Plug‑and‑Play Configuration:** Fully PCI‑compliant with automatic resource allocation (IRQ, I/O base address). - **Comprehensive Software Support:** Includes drivers, DLLs, and libraries for DOS, Windows 95/98/NT, and supports LabVIEW, DASYLab, HP‑VEE, and InTouch.

Manufacturer: Adlink Technology Inc.

Category: A/D General Purpose PCI

- **High-Speed Analog Input:** 16 single-ended analog input channels with 12-bit resolution and up to 100 kS/s sampling rate. - **Programmable Input Ranges:** Bipolar voltage ranges of ±10 V, ±5 V, ±2.5 V, ±1.25 V, and ±0.625 V, software-selectable with programmable gains of x1, x2, x4, x8, and x16. - **Onboard Filtering:** Each analog input channel includes an RC filter for signal conditioning and noise attenuation. - **Analog Output:** One 12-bit D/A output channel with jumper-selectable unipolar (0–10 V) or bipolar (±10 V) output range. - **Digital I/O:** 16 TTL-compatible digital input channels and 16 TTL-compatible digital output channels, plus 4 extended digital inputs and 4 extended digital outputs. - **FIFO Buffer:** 1 k-sample (1024-word) A/D FIFO buffer for efficient data streaming and reduced CPU overhead. - **Triggering and Timing:** Supports software, timer pacer, and external trigger modes. Includes pre-trigger and post-trigger control for event-based data acquisition. - **Counter/Timer:** Integrated Intel 8254-compatible programmable counter/timer with three 16-bit counters and a 2 MHz base clock. - **Dual Interrupt System:** Two independent interrupt sources (EOC, FIFO half-full, pacer, or external trigger) for flexible interrupt-driven data transfer. - **Compact Design:** Half-size PCI form factor (175 mm × 107 mm) with plug-and-play PCI configuration. - **Software Support:** Compatible with Windows and Linux operating systems; supports LabVIEW™, MATLAB®, DAQBench™, and ADLINK’s PCIS-DASK driver library.

Manufacturer: Adlink Technology Inc.

Category: A/D General Purpose PCI

- **High-Speed Analog Input:** 16 single-ended or 8 differential analog input channels with 12-bit resolution and up to 110 kS/s sampling rate. - **Flexible Input Ranges:** Programmable bipolar and unipolar ranges: - Bipolar: ±10 V, ±5 V, ±2.5 V, ±1.25 V, ±0.625 V - Unipolar: 0–10 V, 0–5 V, 0–2.5 V, 0–1.25 V - **Programmable Gain Amplifier:** Software-selectable gains of ×0.5, ×1, ×2, ×4, ×8 for optimized signal conditioning. - **Analog Output:** Two 12-bit D/A channels (DAC7541 or equivalent) with software-programmable ranges (0–5 V, 0–10 V, or external reference up to ±10 V). Output drive: ±5 mA, settling time: 30 µs to 0.5 LSB. - **Digital I/O:** 16 TTL-compatible digital inputs and 16 TTL-compatible digital outputs for control and monitoring. - **Timer/Counter:** One 16-bit general-purpose counter (8254 device) with 2 MHz base clock, external clock up to 10 MHz. - **Bus-Mastering DMA:** High-speed data transfer via PCI bus mastering DMA for efficient analog input acquisition. - **Auto-Scan Function:** Automatic channel scanning for sequential analog input sampling. - **Trigger Modes:** Software, timer pacer, and external trigger modes for flexible acquisition control. - **Operating System Support:** Windows 7/8 (x86/x64) and Linux. - **Software & SDK Support:** Compatible with LabVIEW®, MATLAB®, Visual Studio®, C/C++, and Visual Basic. Includes AD-Logger utility and PCIS-DASK driver library. - **Calibration Options:** - PCI-9112: Analog Output calibrated on 5 V reference - PCI-9112A: Analog Output calibrated on 10 V reference - **Plug-and-Play PCI Configuration:** Fully compliant with PCI 2.1 specification, automatic resource allocation (IRQ, I/O base address).

Manufacturer: Adlink Technology Inc.

Category: A/D General Purpose PCI

- **PCI Bus Compatibility:** Fully compliant with 32-bit PCI bus architecture; supports both 3.3 V and 5 V signaling environments. - **High-Speed Analog Input:** 12-bit resolution with a maximum sampling rate of 110 kS/s and 8 µs conversion time. - **Flexible Input Configuration:** 16 single-ended or 8 differential analog input channels. - **Programmable Gain Control:** Software-selectable gains of ×0.5, ×1, ×2, ×4, and ×8 for optimal signal scaling. - **Wide Input Ranges:** Bipolar (±0.625 V to ±10 V) and unipolar (0–1.25 V to 0–10 V) ranges. - **Automatic Channel Scanning:** Hardware-supported auto-scan for sequential multi-channel sampling. - **Bus-Mastering DMA:** High-speed, CPU-independent data transfer for analog input operations. - **Dual Analog Outputs:** Two 12-bit multiplying DAC channels with programmable output ranges (0–5 V, 0–10 V, or external reference). - **Digital I/O:** 16 TTL-compatible digital inputs and 16 TTL-compatible digital outputs. - **Timer/Counter:** One 16-bit general-purpose counter/timer with a 2 MHz base clock and external clock capability up to 10 MHz. - **Overvoltage Protection:** Continuous ±35 V protection on analog input channels. - **High Input Impedance:** 1 GΩ input impedance ensures minimal signal loading. - **Integrated DC/DC Converter:** Provides stable analog power for improved accuracy. - **Plug-and-Play Installation:** Automatic resource allocation via PCI BIOS; no manual configuration required. - **Software Support:** Compatible with Windows 7/8 (x86/x64) and Linux; drivers available for LabVIEW®, MATLAB®, C/C++, Visual Basic, and Visual Studio.NET. - **Utility Software:** Includes AD-Logger for data logging and calibration utilities.

Manufacturer: Adlink Technology Inc.

Category: A/D General Purpose PCI

- **High-Speed Analog Input:** 12-bit resolution with up to 333 kS/s sampling rate (DG/HG models). 16 single-ended or 8 differential analog input channels. - **Analog Output:** Two 12-bit monolithic multiplying DAC channels (±10 V output range). - **FIFO Buffer:** 1K-sample onboard A/D FIFO memory for high-speed data streaming. - **Channel-Gain Queue:** 256-entry hardware queue allowing per-channel gain and range configuration for sequential sampling. - **Programmable Gain:** x1, x2, x4, x8 for DG/HR models; software-selectable bipolar/unipolar ranges. - **Triggering and Sampling Modes:** - Software, programmable pacer, or external pulse trigger. - Pre-trigger, post-trigger, and about-trigger acquisition modes. - Burst mode and burst mode with sample-and-hold (SSH) emulation. - **Digital I/O:** 4 TTL-compatible digital inputs and 4 digital outputs. - **Timer/Counter:** 82C54 programmable counter with 32-bit pacer timer (4 MHz base clock). - **Interface:** 32-bit PCI bus, plug-and-play configuration, 50-pin SCSI-II type connector. - **Software Support:** Comprehensive driver suite for Windows and DOS, including LabVIEW®, HP-VEE™, DASYLab™, InTouch™, InControl™, ISaGRAF™, and OPC server support. - **Compact Design:** Half-size PCI card suitable for embedded and industrial PCs.

Manufacturer: Adlink Technology Inc.

Category: A/D General Purpose PCI

- **High-Speed Analog Input:** 12-bit resolution with a maximum sampling rate of 333 kS/s. 16 single-ended or 8 differential analog input channels. - **Channel-Gain Queue:** 256-location channel/gain queue allows high-speed acquisition with different gains per channel and non-sequential scanning. - **On-Board FIFO Buffer:** 1 k-sample A/D FIFO ensures reliable high-speed data acquisition under Windows OS. - **Triggering Flexibility:** Supports software, programmable pacer, and external triggers (TTL compatible). Includes pre-trigger, post-trigger, and about-trigger modes. - **Programmable Gain and Input Range:** Bipolar ranges: ±5 V, ±2.5 V, ±1.25 V, ±0.625 V Unipolar ranges: 0–10 V, 0–5 V, 0–2.5 V, 0–1.25 V Software-selectable gain factors (×1, ×2, ×4, ×8). - **Digital I/O:** 4 digital input and 4 digital output channels, TTL/DTL compatible. - **Bus-Mastering DMA:** Supports gap-free, continuous high-throughput data transfer. - **Compact PCI Design:** 32-bit PCI bus, plug-and-play configuration, half-size PCB. - **Robust Protection:** Continuous overvoltage protection up to ±35 V (70 V peak-to-peak). - **Software Support:** Compatible with ADLINK PCIS-DASK, LabVIEW®, HP-VEE™, DASYLab™, InTouch™, InControl™, ISaGRAF™, and OPC Server.

Manufacturer: Adlink Technology Inc.

Category: A/D General Purpose PCI

- **High-Speed Analog-to-Digital Conversion:** 12-bit resolution with a maximum sampling rate of 333 kS/s (330 kHz typical). On-board 1K-sample FIFO buffer for continuous high-speed data acquisition. - **Flexible Analog Input Configuration:** 16 single-ended or 8 differential analog input channels. Programmable gain settings of ×1, ×10, ×100, and ×1000 for high-gain precision measurement. Bipolar input ranges: ±5V, ±0.5V, ±0.05V, ±0.005V. Unipolar input ranges: 0–10V, 0–1V, 0–0.1V, 0–0.01V. - **Dual 12-bit Analog Outputs:** Two monolithic multiplying DAC channels (Burr-Brown DAC2813 or equivalent). Output range: ±10V bipolar, 0–10V unipolar. Typical settling time: 4.5 µs (max 6 µs). Output drive capability: ±5 mA minimum. - **Digital I/O:** 4 TTL-compatible digital input channels and 4 digital output channels. Input voltage levels: - Low ≤ 0.8V, High ≥ 2.0V. Output voltage levels: - Low ≤ 0.5V @ 8 mA, High ≥ 2.7V @ 400 µA. - **Triggering and Timing:** Multiple trigger modes: software, programmable pacer, and external pulse trigger. Supports pre-trigger, post-trigger, and about-trigger acquisition modes. Programmable burst mode sampling with optional simultaneous sample-and-hold (SSH). Internal 82C54 programmable counter/timer with 4 MHz base clock. - **Data Transfer Modes:** Supports program-controlled, interrupt-driven, and DMA (bus mastering) data transfer. Channel-gain queue with 256 entries for high-speed multi-channel acquisition. - **Software and Driver Support:** Compatible with Windows 95/98/NT/2000. Supported environments: LabVIEW®, HP VEE™, DASYLab™, InTouch™, InControl™, ISaGRAF™, and OPC. Includes PCIS-DASK driver library and ActiveX controls (DAQBench™). - **Compact and Robust Design:** Half-size PCI card (173 mm × 102 mm). 50-pin SCSI-II type D connector for all analog, digital, and timing signals. On-board DC/DC converter for stable analog reference voltages.

Manufacturer: Adlink Technology Inc.

Category: A/D General Purpose PCI

- **High-Speed Analog Input:** 12-bit resolution with a maximum sampling rate of 333 kS/s. Supports 16 single-ended or 8 differential analog input channels. - **Programmable Gain and Range:** Software-selectable gain settings of ×1, ×10, ×100, and ×1000. Bipolar ranges: ±5 V, ±0.5 V, ±0.05 V, ±0.005 V. Unipolar ranges: 0–10 V, 0–1 V, 0–0.1 V, 0–0.01 V. - **Channel-Gain Queue:** 256-entry hardware queue allows high-speed scanning with different gains per channel and non-sequential channel order. - **Onboard FIFO Buffer:** 1 k-sample A/D FIFO ensures reliable high-speed data acquisition under multitasking OS environments. - **Triggering and Timing:** Supports software, pacer (internal timer), and external triggers (TTL/5 V compatible). Programmable pre-trigger, post-trigger, and about-trigger modes. Burst mode and burst mode with sample-and-hold (SSH) supported. - **Digital I/O:** 4 digital input and 4 digital output channels, TTL-compatible. - **Bus-Mastering DMA:** High-throughput, gap-free data transfer directly to system memory without CPU overhead. - **Robust Input Protection:** Continuous overvoltage protection up to ±35 V. Input impedance of 1 GΩ ensures minimal loading on signal sources. - **Software Support:** Compatible with ADLINK’s PCIS-DASK driver library and supports LabVIEW®, HP-VEE™, DASYLab™, InTouch™, InControl™, ISaGRAF™, and OPC interfaces.

Manufacturer: Adlink Technology Inc.

Category: A/D General Purpose PCI

- **High-Resolution Analog Input:** 16-bit A/D conversion with up to 250 kS/s sampling rate. - **Flexible Channel Configuration:** 16 single-ended or 8 differential analog input channels. - **Dual Analog Output:** Two 16-bit static analog output channels with ±5 V range. - **Programmable Function I/O:** Configurable as digital I/O, timer/counter, PWM, or encoder input. - **Encoder Support:** Two 4 MHz encoder inputs supporting AB phase and CW/CCW modes. - **PWM Generation:** Two PWM outputs with 1–99% duty cycle and 20 MHz–0.005 Hz modulation frequency. - **Auto-Calibration:** Built-in self-calibration for maintaining measurement accuracy. - **Universal PCI Interface:** Compatible with both 3.3 V and 5 V PCI slots. - **Bus-Mastering DMA:** High-speed data transfer with scatter/gather DMA support. - **Comprehensive Software Support:** Compatible with ADLINK PCIS-DASK library, LabVIEW®, and Windows OS environments. - **Compact Design:** 120 mm × 87 mm PCB with a 37-pin D-Sub connector. - **Ideal Applications:** Manufacturing automation, laboratory research, ATE systems, and motion control.

Manufacturer: Adlink Technology Inc.

Category: A/D General Purpose PCI

- **High‑Resolution Analog Input:** 16 single‑ended or 8 differential channels, 16‑bit resolution, up to 250 kS/s sampling rate per channel. Programmable input ranges: ±10 V, ±5 V, ±2.5 V, ±2 V, ±1.25 V, ±1 V, ±500 mV, ±250 mV. Programmable gains: 1, 2, 4, 5, 8, 10, 20, 40. - **Simultaneous Analog Output:** Two 16‑bit analog output channels, up to 1 MS/s simultaneous update rate, ±10 V output range, 20 V/µs slew rate. - **Programmable Function I/O:** 16 DI and 16 DO TTL channels (3.3 V/5 V compatible). Supports high‑speed DIO up to 2 MHz, 4 × 32‑bit general‑purpose timer/counters (80 MHz base clock), 4 PWM outputs, and 2 encoder inputs. - **Encoder Inputs:** Two isolated 4 MHz encoder channels supporting CW/CCW and AB‑phase (×1, ×2, ×4) modes with 2500 Vrms isolation. - **Advanced Triggering and Synchronization:** Software and external digital triggers for AI, AO, and DIO. Supports post‑trigger, retrigger, and gated trigger modes. Multi‑card synchronization via SSI (System Synchronization Interface) bus. - **Auto‑Calibration:** Onboard reference and EEPROM‑stored calibration constants ensure long‑term accuracy and temperature stability. - **Software and OS Support:** Drivers for Windows 7/8 x86/x64 and Linux. SDKs for LabVIEW®, MATLAB®, C/C++, Visual Basic, and Visual Studio .NET. Utilities: AD‑Logger, DAQPilot, DAQMaster. - **Mechanical and Electrical:** Two 68‑pin VHDCI connectors, compact 120 × 87 mm PCB, universal PCI interface, and robust industrial design.

Manufacturer: Adlink Technology Inc.

Category: A/D General Purpose PCI

- **High‑Resolution Analog Input:** 32 single‑ended or 16 differential analog input channels with 16‑bit resolution and up to 500 kS/s sampling rate per channel. - **Simultaneous Analog Output:** Two 16‑bit analog output channels with up to 1 MS/s update rate, ±10 V output range, and 512‑sample FIFO buffer. - **Programmable Function I/O:** 16 DI / 16 DO TTL‑compatible lines supporting 3.3 V and 5 V logic levels. Configurable as digital I/O, high‑speed DIO (2 MHz), general‑purpose timer/counter, PWM output, or encoder input. - **Encoder Inputs:** Two isolated 4 MHz encoder channels supporting CW/CCW and AB‑phase (X1, X2, X4) modes for motion feedback. - **PWM Generation:** Four PWM outputs with modulation frequency from 20 MHz down to 0.005 Hz and duty cycle adjustable from 1 % to 99 %. - **High‑Speed Data Transfer:** Dedicated DMA channels for A/D, D/A, and high‑speed DIO with scatter/gather bus‑mastering for efficient large‑block transfers. - **Triggering and Synchronization:** Supports software and external digital triggers for A/D, D/A, and DIO operations. Multiple‑card synchronization via SSI (System Synchronization Interface) bus. - **Auto‑Calibration:** Onboard reference and EEPROM‑stored calibration constants ensure long‑term accuracy with automatic self‑calibration. - **Software and OS Support:** Compatible with Windows 7/8 x86/x64 and Linux. Drivers and SDKs available for LabVIEW®, MATLAB®, C/C++, Visual Basic, and Visual Studio .NET. - **Utility Software:** AD‑Logger, DAQPilot, and DAQMaster for configuration, logging, and device management.

Manufacturer: Adlink Technology Inc.

Category: A/D General Purpose PCI